[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#446202: marked as done (linux-image-2.6.22-2-k7: dmfe driver stopped working correctly in kernel 2.6.22)

Your message dated Fri, 29 Jul 2011 16:43:09 +0200
with message-id <20110729144309.GA20075@pisco.westfalen.local>
and subject line Re: linux-image-2.6.22-2-k7: dmfe driver stopped working correctly in kernel 2.6.22
has caused the Debian Bug report #446202,
regarding linux-image-2.6.22-2-k7: dmfe driver stopped working correctly in kernel 2.6.22
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
446202: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=446202
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: linux-image-2.6.22-2-k7
Severity: important

When booting kernel 2.6.22 network goes up but the server is unable to make it
work correctly: even a simple ping does not respond.
ARP cache table is correctly populated tough.

Most recent kernel where this bug did not occur: 2.6.21.

lspci output:
02:0c.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x DEC-Tulip
compatible 10/100 Ethernet (rev 40)
        Subsystem: Unknown device 3030:5032
        Flags: bus master, medium devsel, latency 64, IRQ 225
        I/O ports at d800 [size=256]
        Memory at feafbc00 (32-bit, non-prefetchable) [size=256]
        Expansion ROM at bfe00000 [disabled] [size=256K]
        Capabilities: [50] Power Management version 2

This bug has been reported to upstream as #9094

-- System Information:
Debian Release: 4.0
  APT prefers stable
  APT policy: (500, 'stable'), (200, 'testing')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.21-1-k7
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

--- End Message ---
--- Begin Message --- 
On Sun, Dec 21, 2008 at 11:10:24PM +0100, Moritz Muehlenhoff wrote:
> On Thu, Oct 11, 2007 at 07:56:01AM +0200, Alessandro Polverini wrote:
> > Package: linux-image-2.6.22-2-k7
> > Severity: important
> > 
> > When booting kernel 2.6.22 network goes up but the server is unable to make it
> > work correctly: even a simple ping does not respond.
> > ARP cache table is correctly populated tough.
> > 
> > Most recent kernel where this bug did not occur: 2.6.21.
> > 
> > lspci output:
> > 02:0c.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x DEC-Tulip
> > compatible 10/100 Ethernet (rev 40)
> >         Subsystem: Unknown device 3030:5032
> >         Flags: bus master, medium devsel, latency 64, IRQ 225
> >         I/O ports at d800 [size=256]
> >         Memory at feafbc00 (32-bit, non-prefetchable) [size=256]
> >         Expansion ROM at bfe00000 [disabled] [size=256K]
> >         Capabilities: [50] Power Management version 2
> > 
> > This bug has been reported to upstream as #9094
> 
> The upstream bug report indicates that this bug was triggered by a compiler
> bug, which has now been fixed in the mean time. Can you confirm?

Closing due to a lack of feedback.
 
Cheers,
        Moritz

--- End Message ---
Reply to: