Bug#633942: linux-image-2.6.39-2-amd64: occasional freeze after resume
Package: linux-2.6
Version: 2.6.39-3
Severity: important
My laptop (DELL Latitude E6400) sometimes freezes after resume: I can
hear the fan, but the screen remains off and I cannot suspend the
laptop again (with Fn+F1). This happened twice in the last 24 hours.
I had to switch it off without a clean shutdown.
-- Package-specific info:
** Version:
Linux version 2.6.39-2-amd64 (Debian 2.6.39-3) (ben@decadent.org.uk) (gcc version 4.4.6 (Debian 4.4.6-6) ) #1 SMP Tue Jul 5 02:51:22 UTC 2011
** Command line:
root=/dev/mapper/xvii-root ro quiet
** Not tainted
** Kernel log:
[ 89.977744] sdhci-pci 0000:03:01.2: restoring config space at offset 0x4 (was 0x0, writing 0xf1eff600)
[ 89.977749] sdhci-pci 0000:03:01.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
[ 89.977755] sdhci-pci 0000:03:01.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[ 89.978003] PM: early resume of devices complete after 1.798 msecs
[ 89.978067] pci0000:00: wake-up capability disabled by ACPI
[ 89.978073] e1000e 0000:00:19.0: PME# disabled
[ 89.978154] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 89.978189] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 89.978195] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 89.978219] usb usb3: root hub lost power or was reset
[ 89.978232] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 89.978239] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 89.978262] usb usb4: root hub lost power or was reset
[ 89.978273] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 89.978278] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 89.978311] usb usb5: root hub lost power or was reset
[ 89.978331] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 89.978340] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 89.978382] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 89.978393] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 89.978434] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 89.978467] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 89.978473] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 89.978497] usb usb6: root hub lost power or was reset
[ 89.978508] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 89.978514] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 89.978537] usb usb7: root hub lost power or was reset
[ 89.978548] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 89.978556] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 89.978579] usb usb8: root hub lost power or was reset
[ 89.978591] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 89.978596] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 89.978636] pci 0000:00:1e.0: setting latency timer to 64
[ 89.978649] ahci 0000:00:1f.2: setting latency timer to 64
[ 89.978694] [drm] nouveau 0000:01:00.0: We're back, enabling device...
[ 89.978714] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 89.978734] nouveau 0000:01:00.0: setting latency timer to 64
[ 89.978742] [drm] nouveau 0000:01:00.0: POSTing device...
[ 89.978745] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD601
[ 89.980668] iwlagn 0000:0c:00.0: RF_KILL bit toggled to disable radio.
[ 89.980687] sdhci-pci 0000:03:01.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 89.982051] sd 0:0:0:0: [sda] Starting disk
[ 90.003567] [drm] nouveau 0000:01:00.0: 0xD7E0: i2c wr fail: -6
[ 90.008929] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD9B3
[ 90.015269] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE259
[ 90.015320] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE34B
[ 90.016447] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE557
[ 90.016453] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xE5BC
[ 90.036438] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
[ 90.044149] firewire_core: skipped bus generations, destroying all nodes
[ 90.044616] dell-wmi: Received unknown WMI event (0x11)
[ 90.121933] serial 00:09: activated
[ 90.156076] [drm] nouveau 0000:01:00.0: Reinitialising engines...
[ 90.156300] [drm] nouveau 0000:01:00.0: Restoring mode...
[ 90.300109] ata6: SATA link down (SStatus 0 SControl 300)
[ 90.308104] ata5: SATA link down (SStatus 0 SControl 300)
[ 90.344065] usb 1-6: reset high speed USB device number 3 using ehci_hcd
[ 90.496264] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 90.575401] firewire_core: rediscovered device fw0
[ 90.607116] ata2.00: configured for UDMA/100
[ 90.643317] dell-wmi: Received unknown WMI event (0x11)
[ 90.775702] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input16
[ 91.639999] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input17
[ 93.488276] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 93.503198] ata1.00: configured for UDMA/133
[ 93.668328] PM: resume of devices complete after 3690.282 msecs
[ 93.668561] PM: Finishing wakeup.
[ 93.668562] Restarting tasks ...
[ 93.672068] usb 5-1: USB disconnect, device number 2
[ 93.677473] done.
[ 93.677483] video LNXVIDEO:00: Restoring backlight state
[ 94.276312] usb 3-1: new full speed USB device number 2 using uhci_hcd
[ 94.340167] hub 3-0:1.0: unable to enumerate USB device on port 1
[ 94.580289] usb 5-1: new full speed USB device number 3 using uhci_hcd
[ 94.763544] usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800
[ 94.763553] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 94.763559] usb 5-1: Product: 5880
[ 94.763564] usb 5-1: Manufacturer: Broadcom Corp
[ 94.763569] usb 5-1: SerialNumber: 0123456789ABCD
[ 94.763827] usb 5-1: config 0 descriptor??
[ 99.552335] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 99.608148] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 99.608738] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2747.196307] usb 6-2: new full speed USB device number 2 using uhci_hcd
[ 2747.352409] usb 6-2: New USB device found, idVendor=067b, idProduct=2303
[ 2747.352418] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2747.352425] usb 6-2: Product: USB-Serial Controller D
[ 2747.352430] usb 6-2: Manufacturer: Prolific Technology Inc.
[ 2748.084052] usbcore: registered new interface driver usbserial
[ 2748.084065] USB Serial support registered for generic
[ 2748.084306] usbcore: registered new interface driver usbserial_generic
[ 2748.084308] usbserial: USB Serial Driver core
[ 2748.090398] USB Serial support registered for pl2303
[ 2748.090421] pl2303 6-2:1.0: pl2303 converter detected
[ 2748.102426] usb 6-2: pl2303 converter now attached to ttyUSB0
[ 2748.102439] usbcore: registered new interface driver pl2303
[ 2748.102441] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 2817.017667] PPP generic driver version 2.4.2
[ 2830.837632] PPP BSD Compression module registered
[ 2830.845259] PPP Deflate Compression module registered
** Model information
sys_vendor: Dell Inc.
product_name: Latitude E6400
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A12
board_vendor: Dell Inc.
board_name: 0K672N
board_version:
** Loaded modules:
Module Size Used by
ppp_deflate 12864 0
zlib_deflate 25466 1 ppp_deflate
bsd_comp 12868 0
ppp_async 17077 1
crc_ccitt 12347 1 ppp_async
ppp_generic 26263 7 ppp_deflate,bsd_comp,ppp_async
slhc 12562 1 ppp_generic
pl2303 17164 1
usbserial 31986 4 pl2303
acpi_cpufreq 12849 1
mperf 12411 1 acpi_cpufreq
cpufreq_powersave 12454 0
cpufreq_stats 12762 0
cpufreq_userspace 12576 0
cpufreq_conservative 13147 0
xt_multiport 12518 2
iptable_filter 12536 1
ip_tables 21818 1 iptable_filter
x_tables 18886 3 xt_multiport,iptable_filter,ip_tables
parport_pc 22191 0
ppdev 12725 0
lp 17190 0
parport 31650 3 parport_pc,ppdev,lp
rfcomm 32744 0
bnep 17424 2
bluetooth 107224 10 rfcomm,bnep
crc16 12343 1 bluetooth
binfmt_misc 12914 1
uinput 17392 1
fuse 61554 1
nfsd 258506 2
nfs 251154 0
lockd 70844 2 nfsd,nfs
fscache 36071 1 nfs
auth_rpcgss 36788 2 nfsd,nfs
nfs_acl 12511 2 nfsd,nfs
sunrpc 162130 6 nfsd,nfs,lockd,auth_rpcgss,nfs_acl
ext2 62796 1
firewire_sbp2 17825 0
loop 22479 0
snd_hda_codec_idt 53263 1
arc4 12458 2
ecb 12737 2
snd_hda_intel 25946 0
snd_hda_codec 67865 2 snd_hda_codec_idt,snd_hda_intel
snd_hwdep 13148 1 snd_hda_codec
snd_pcm 67276 2 snd_hda_intel,snd_hda_codec
uvcvideo 57386 0
iwlagn 174851 0
pcmcia 32719 0
snd_seq 44678 0
joydev 17138 0
snd_timer 22658 2 snd_pcm,snd_seq
snd_seq_device 13155 1 snd_seq
nouveau 515735 2
mac80211 181270 1 iwlagn
ttm 52224 1 nouveau
videodev 66266 1 uvcvideo
media 18148 1 videodev
drm_kms_helper 26950 1 nouveau
drm 166500 4 nouveau,ttm,drm_kms_helper
cfg80211 126244 2 iwlagn,mac80211
snd 52324 8 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
yenta_socket 22601 0
soundcore 13014 1 snd
v4l2_compat_ioctl32 16575 1 videodev
i2c_i801 16870 0
i2c_algo_bit 12834 1 nouveau
pcmcia_rsrc 17483 1 yenta_socket
dell_laptop 12852 0
snd_page_alloc 12969 2 snd_hda_intel,snd_pcm
rfkill 19014 4 bluetooth,cfg80211,dell_laptop
psmouse 55199 0
i2c_core 23766 6 nouveau,videodev,drm_kms_helper,drm,i2c_i801,i2c_algo_bit
dcdbas 13256 1 dell_laptop
processor 27431 3 acpi_cpufreq
pcmcia_core 18333 3 pcmcia,yenta_socket,pcmcia_rsrc
dell_wmi 12477 0
battery 13109 0
ac 12624 0
evdev 17475 17
sparse_keymap 12760 1 dell_wmi
serio_raw 12878 0
pcspkr 12579 0
wmi 13202 1 dell_wmi
power_supply 13475 4 nouveau,dell_laptop,battery,ac
video 17553 1 nouveau
button 12895 1 nouveau
ext3 112254 1
jbd 41698 1 ext3
mbcache 12930 2 ext2,ext3
sha256_generic 16797 2
cryptd 14463 0
aes_x86_64 16796 4
aes_generic 37122 1 aes_x86_64
cbc 12747 2
dm_crypt 22257 1
dm_mod 62468 9 dm_crypt
sg 25769 0
sd_mod 35644 3
sr_mod 21824 0
cdrom 35134 1 sr_mod
crc_t10dif 12348 1 sd_mod
uhci_hcd 26290 0
ahci 25089 2
libahci 22616 1 ahci
sdhci_pci 13184 0
libata 151572 2 ahci,libahci
sdhci 21685 1 sdhci_pci
ehci_hcd 39487 0
firewire_ohci 35027 0
mmc_core 58824 1 sdhci
firewire_core 47790 2 firewire_sbp2,firewire_ohci
scsi_mod 161557 5 firewire_sbp2,sg,sr_mod,sd_mod,libata
crc_itu_t 12347 1 firewire_core
usbcore 127203 6 pl2303,usbserial,uvcvideo,uhci_hcd,ehci_hcd
e1000e 128034 0
thermal 17330 0
thermal_sys 17939 3 processor,video,thermal
** Network interface configuration:
auto lo
iface lo inet loopback
mapping eth0
script guessnet-ifupdown
map default: eth0-dhcp
map debug: true
map timeout: 10
iface eth0-dhcp inet dhcp
iface eth0-home inet static
address 192.168.0.8
netmask 255.255.255.0
broadcast 192.168.0.255
gateway 192.168.0.1
test peer address 192.168.0.1 mac 00:00:c5:b4:98:74
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 00:24:e8:97:5f:73 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:21:6a:47:b3:80 brd ff:ff:ff:ff:ff:ff
4: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 3
link/ppp
inet 62.147.25.155 peer 192.168.254.254/32 scope global ppp0
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 146701 1044 0 0 0 0 0 0 146701 1044 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
ppp0: 2933981 8095 0 0 0 0 0 0 837558 6635 0 0 0 0 0 0
*** Protocol statistics:
Ip:
8805 total packets received
0 forwarded
0 incoming packets discarded
8805 incoming packets delivered
7445 requests sent out
5 outgoing packets dropped
4712 dropped because of missing route
Icmp:
48 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 48
62 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 62
IcmpMsg:
InType3: 48
OutType3: 62
Tcp:
75 active connections openings
18 passive connection openings
2 failed connection attempts
0 connection resets received
5 connections established
8547 segments received
7123 segments send out
44 segments retransmited
0 bad segments received.
10 resets sent
Udp:
465 packets received
62 packets to unknown port received.
0 packet receive errors
541 packets sent
SndbufErrors: 5
UdpLite:
TcpExt:
25 TCP sockets finished time wait in fast timer
609 delayed acks sent
Quick ack mode was activated 79 times
132 packets directly queued to recvmsg prequeue.
7209 bytes directly received in process context from prequeue
4421 packet headers predicted
90 packets header predicted and directly queued to user
380 acknowledgments not containing data payload received
2302 predicted acknowledgments
28 congestion windows recovered without slow start after partial ack
36 other TCP timeouts
80 DSACKs sent for old packets
15 DSACKs received
2 connections reset due to unexpected data
TCPDSACKIgnoredNoUndo: 14
IpExt:
InOctets: 2991312
OutOctets: 930444
*** Device features:
eth0: 0x1149a9
lo: 0x201b7c65
ppp0: 0x6000
wlan0: 0x6000
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port [8086:2a41] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f2000000-f6efffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network Connection [8086:10f5] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f6fe0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f6fdb000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at efe0 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f60 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f80 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6fa0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f6fdc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: f0600000-f07fffff
Prefetchable memory behind bridge: 00000000f0800000-00000000f09fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f1f00000-f1ffffff
Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f0000000-f01fffff
Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f20 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6f40 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=07, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f1e00000-f1efffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 RAID bus controller [0104]: Intel Corporation Mobile 82801 SATA RAID Controller [8086:282a] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 45
Region 0: I/O ports at 6e70 [size=8]
Region 1: I/O ports at 6e78 [size=4]
Region 2: I/O ports at 6e80 [size=8]
Region 3: I/O ports at 6e88 [size=4]
Region 4: I/O ports at 6ea0 [size=32]
Region 5: Memory at fed1c800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 0: Memory at f6fdaf00 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1100 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: nVidia Corporation G98M [Quadro NVS 160M] [10de:06eb] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f2000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at df00 [size=128]
[virtual] Expansion ROM at f4000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
03:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ba)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f1e00000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
Memory window 0: f0c00000-f0fff000 (prefetchable)
Memory window 1: f1000000-f13ff000
I/O window 0: 00002000-000020ff
I/O window 1: 00002400-000024ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
03:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 04) (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f1eff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
03:01.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 21) (prog-if 01)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f1eff600 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
0c:00.0 Network controller [0280]: Intel Corporation Ultimate N WiFi Link 5300 [8086:4235]
Subsystem: Intel Corporation Device [8086:1121]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f1ffe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0c45:63f8 Microdia Sonix Integrated Webcam
Bus 005 Device 003: ID 0a5c:5800 Broadcom Corp. BCM5880 Secure Applications Processor
Bus 006 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.39-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=POSIX, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.39-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.40 Debian configuration management sy
ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs
ii linux-base 3.3 Linux image base package
ii module-init-tools 3.16-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.39-2-amd64 recommends:
ii firmware-linux-free 3 Binary firmware for various driver
Versions of packages linux-image-2.6.39-2-amd64 suggests:
pn grub-pc | extlinux | lilo <none> (no description available)
ii linux-doc-2.6.39 2.6.39-3 Linux kernel specific documentatio
Versions of packages linux-image-2.6.39-2-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
ii firmware-iwlwifi 0.32 Binary firmware for Intel Wireless
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.39-2-amd64/postinst/ignoring-ramdisk:
linux-image-2.6.39-2-amd64/postinst/missing-firmware-2.6.39-2-amd64:
linux-image-2.6.39-2-amd64/postinst/depmod-error-initrd-2.6.39-2-amd64: false
linux-image-2.6.39-2-amd64/prerm/removing-running-kernel-2.6.39-2-amd64: true
Reply to: