Bug#633516: linux-image-3.0.0-rc6-686-pae: comedi modules missing 3.0-rc6
Package: linux-2.6
Version: 3.0.0~rc6-1~experimental.1
Severity: normal
The following Comedi modules are in the stable Kernel, but are not in
3.0rc6. Adding these modules will allow continued Comedi operation in
the next Debian stable.
acl7225b.ko
addi_apci_035.ko
addi_apci_1032.ko
addi_apci_1500.ko
addi_apci_1516.ko
addi_apci_1564.ko
addi_apci_16xx.ko
addi_apci_2016.ko
addi_apci_2032.ko
addi_apci_2200.ko
addi_apci_3001.ko
addi_apci_3120.ko
addi_apci_3501.ko
addi_apci_3xxx.ko
adl_pci6208.ko
adl_pci7296.ko
adl_pci7432.ko
adl_pci8164.ko
adl_pci9111.ko
adl_pci9118.ko
adq12b.ko
adv_pci1710.ko
adv_pci1723.ko
adv_pci_dio.ko
aio_aio12_8.ko
aio_iiro_16.ko
amplc_dio200.ko
amplc_pc236.ko
amplc_pc263.ko
amplc_pci224.ko
amplc_pci230.ko
c6xdigio.ko
cb_das16_cs.ko
cb_pcidas64.ko
cb_pcidas.ko
cb_pcidda.ko
cb_pcidio.ko
cb_pcimdas.ko
cb_pcimdda.ko
comedi_bond.ko
comedi_parport.ko
comedi_test.ko
contec_pci_dio.ko
daqboard2000.ko
das08_cs.ko
das08.ko
das16.ko
das16m1.ko
das1800.ko
das6402.ko
das800.ko
dmm32at.ko
dt2801.ko
dt2811.ko
dt2814.ko
dt2815.ko
dt2817.ko
dt282x.ko
dt3000.ko
dt9812.ko
fl512.ko
gsc_hpdi.ko
icp_multi.ko
ii_pci20kc.ko
jr3_pci.ko
ke_counter.ko
me4000.ko
me_daq.ko
mpc624.ko
multiq3.ko
ni_6527.ko
ni_65xx.ko
ni_660x.ko
ni_670x.ko
ni_at_a2150.ko
ni_at_ao.ko
ni_atmio16d.ko
ni_atmio.ko
ni_daq_700.ko
ni_daq_dio24.ko
ni_labpc_cs.ko
ni_labpc.ko
ni_mio_cs.ko
ni_pcidio.ko
pcl711.ko
pcl724.ko
pcl725.ko
pcl726.ko
pcl730.ko
pcl812.ko
pcl816.ko
pcl818.ko
pcm3724.ko
pcm3730.ko
pcmad.ko
pcmda12.ko
pcmmio.ko
pcmuio.ko
poc.ko
quatech_daqp_cs.ko
rtd520.ko
rti800.ko
rti802.ko
s526.ko
s626.ko
serial2002.ko
skel.ko
ssv_dnp.ko
unioxx5.ko
usbduxfast.ko
usbdux.ko
vmk80xx.ko
-- Package-specific info:
** Version:
Linux version 3.0.0-rc6-686-pae (Debian 3.0.0~rc6-1~experimental.1)
(maks@debian.org) (gcc version 4.4.6 (Debian 4.4.6-6) ) #1 SMP Wed Jul
6 16:49:19 UTC 2011
** Command line:
BOOT_IMAGE=/vmlinuz-3.0.0-rc6-686-pae root=/dev/mapper/waterfall-root ro quiet
** Not tainted
** Kernel log:
[ 2.457358] usb usb2: Product: UHCI Host Controller
[ 2.457364] usb usb2: Manufacturer: Linux 3.0.0-rc6-686-pae uhci_hcd
[ 2.457370] usb usb2: SerialNumber: 0000:00:07.3
[ 2.457819] hub 2-0:1.0: USB hub found
[ 2.457840] hub 2-0:1.0: 2 ports detected
[ 2.494274] libata version 3.00 loaded.
[ 2.495622] pata_via 0000:00:07.1: version 0.3.4
[ 2.528202] scsi0 : pata_via
[ 2.528708] scsi1 : pata_via
[ 2.528877] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
[ 2.528888] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
[ 2.696908] ata1.00: ATA-4: QUANTUM FIREBALLlct10 20, A03.0900, max UDMA/66
[ 2.696924] ata1.00: 39876480 sectors, multi 16: LBA
[ 2.712965] ata1.00: configured for UDMA/66
[ 2.713508] scsi 0:0:0:0: Direct-Access ATA QUANTUM
FIREBALL A03. PQ: 0 ANSI: 5
[ 2.768228] usb 1-1: new low speed USB device number 2 using uhci_hcd
[ 2.868636] ata2.01: ATAPI: Lite-On LTN483S 48x Max, PD02, max
UDMA/33, CDB intr
[ 2.876508] ata2.01: configured for UDMA/33
[ 2.877629] scsi 1:0:1:0: CD-ROM Lite-On LTN483S 48x
Max PD02 PQ: 0 ANSI: 5
[ 2.882709] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 2.882811] 8139cp 0000:00:0d.0: This (id 10ec:8139 rev 10) is not
an 8139C+ compatible chip, use 8139too
[ 2.895204] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 2.896401] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 2.896412] PCI: setting IRQ 11 as level-triggered
[ 2.896431] 8139too 0000:00:0d.0: PCI INT A -> Link[LNKA] -> GSI 11
(level, low) -> IRQ 11
[ 2.898242] 8139too 0000:00:0d.0: eth0: RealTek RTL8139 at 0xe800,
00:01:29:d1:d5:51, IRQ 11
[ 2.947304] usb 1-1: New USB device found, idVendor=046d, idProduct=c31c
[ 2.947318] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.947327] usb 1-1: Product: USB Keyboard
[ 2.947332] usb 1-1: Manufacturer: Logitech
[ 2.949385] sd 0:0:0:0: [sda] 39876480 512-byte logical blocks:
(20.4 GB/19.0 GiB)
[ 2.949606] sd 0:0:0:0: [sda] Write Protect is off
[ 2.949618] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.949718] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.952975] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 2.952992] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.953534] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 2.978179] sda: sda1 sda2 < sda5 >
[ 2.979497] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.056201] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.064202] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 3.128287] input: Logitech USB Keyboard as
/devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0/input/input0
[ 3.131238] generic-usb 0003:046D:C31C.0001: input,hidraw0: USB HID
v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:07.2-1/input0
[ 3.173169] input: Logitech USB Keyboard as
/devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.1/input/input1
[ 3.173834] generic-usb 0003:046D:C31C.0002: input,hidraw1: USB HID
v1.10 Device [Logitech USB Keyboard] on usb-0000:00:07.2-1/input1
[ 3.175204] usbcore: registered new interface driver usbhid
[ 3.175221] usbhid: USB HID core driver
[ 3.636197] device-mapper: uevent: version 1.0.3
[ 3.638963] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02)
initialised: dm-devel@redhat.com
[ 4.341560] PM: Starting manual resume from disk
[ 4.341583] PM: Hibernation image partition 254:1 present
[ 4.341589] PM: Looking for hibernation image.
[ 4.342532] PM: Image not found (code -22)
[ 4.342542] PM: Hibernation image not present or could not be loaded.
[ 4.381080] EXT3-fs: barriers not enabled
[ 4.394734] kjournald starting. Commit interval 5 seconds
[ 4.394828] EXT3-fs (dm-0): mounted filesystem with ordered data mode
[ 6.627825] udevd[222]: starting version 171
[ 7.111407] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 7.111434] ACPI: Power Button [PWRB]
[ 7.111606] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 7.111620] ACPI: Sleep Button [SLPB]
[ 7.111822] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 7.125941] ACPI: Power Button [PWRF]
[ 7.129587] ACPI: acpi_idle registered with cpuidle
[ 7.129755] Marking TSC unstable due to TSC halts in idle
[ 7.147868] Switching to clocksource acpi_pm
[ 7.226816] parport_pc: VIA 686A/8231 detected
[ 7.226828] parport_pc: probing current configuration
[ 7.226851] parport_pc: Current parallel port base: 0x378
[ 7.226911] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[ 7.325217] parport_pc: VIA parallel port: io=0x378, irq=7
[ 7.444973] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.538575] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.683780] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 8.138036] Error: Driver 'pcspkr' is already registered, aborting...
[ 8.369177] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 8.369190] PCI: setting IRQ 10 as level-triggered
[ 8.369209] VIA 82xx Audio 0000:00:07.5: PCI INT C -> Link[LNKC] ->
GSI 10 (level, low) -> IRQ 10
[ 8.369388] VIA 82xx Audio 0000:00:07.5: setting latency timer to 64
[ 10.153202] EXT3-fs (dm-0): using internal journal
[ 10.507754] loop: module loaded
[ 12.376953] Adding 733180k swap on /dev/mapper/waterfall-swap_1.
Priority:-1 extents:1 across:733180k
[ 15.483193] EXT3-fs: barriers not enabled
[ 15.501982] kjournald starting. Commit interval 5 seconds
[ 15.502791] EXT3-fs (dm-5): using internal journal
[ 15.502814] EXT3-fs (dm-5): mounted filesystem with ordered data mode
[ 15.675306] EXT3-fs: barriers not enabled
[ 15.747525] kjournald starting. Commit interval 5 seconds
[ 15.748207] EXT3-fs (dm-4): using internal journal
[ 15.748229] EXT3-fs (dm-4): mounted filesystem with ordered data mode
[ 15.789511] EXT3-fs: barriers not enabled
[ 15.798512] kjournald starting. Commit interval 5 seconds
[ 15.799201] EXT3-fs (dm-2): using internal journal
[ 15.799222] EXT3-fs (dm-2): mounted filesystem with ordered data mode
[ 15.829230] EXT3-fs: barriers not enabled
[ 15.836862] kjournald starting. Commit interval 5 seconds
[ 15.837550] EXT3-fs (dm-3): using internal journal
[ 15.837571] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[ 18.514657] 8139too 0000:00:0d.0: eth0: link up, 100Mbps,
full-duplex, lpa 0x45E1
** Model information
not available
** Loaded modules:
Module Size Used by
ext2 53488 1
loop 17777 0
snd_via82xx 22562 0
gameport 13332 1 snd_via82xx
snd_ac97_codec 83732 1 snd_via82xx
ac97_bus 12462 1 snd_ac97_codec
snd_mpu401_uart 13299 1 snd_via82xx
joydev 16906 0
via686a 13085 0
snd_pcm 52731 2 snd_via82xx,snd_ac97_codec
snd_rawmidi 18311 1 snd_mpu401_uart
evdev 17180 5
snd_timer 22171 1 snd_pcm
serio_raw 12758 0
snd_seq_device 12995 1 snd_rawmidi
snd 38255 7
snd_via82xx,snd_ac97_codec,snd_mpu401_uart,snd_pcm,snd_rawmidi,snd_timer,snd_seq_device
snd_page_alloc 12841 2 snd_via82xx,snd_pcm
soundcore 12878 1 snd
pcspkr 12515 0
i2c_viapro 12451 0
shpchp 26653 0
i2c_core 19022 1 i2c_viapro
pci_hotplug 26303 1 shpchp
parport_pc 21895 0
parport 27018 1 parport_pc
processor 26983 1
button 12783 0
thermal_sys 17667 1 processor
ext3 102125 5
jbd 40818 1 ext3
mbcache 12810 2 ext2,ext3
dm_mod 56387 18
usbhid 35206 0
hid 63937 1 usbhid
sg 21385 0
sd_mod 35060 3
sr_mod 17418 0
crc_t10dif 12332 1 sd_mod
cdrom 34631 1 sr_mod
8139too 21937 0
8139cp 21974 0
ata_generic 12439 0
mii 12595 2 8139too,8139cp
pata_via 12733 2
libata 132136 2 ata_generic,pata_via
uhci_hcd 26153 0
ehci_hcd 34885 0
floppy 47893 0
usbcore 103321 4 usbhid,uhci_hcd,ehci_hcd
scsi_mod 134491 4 sg,sr_mod,sd_mod,libata
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UNKNOWN qlen 1000
link/ether 00:01:29:d1:d5:51 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.181/24 brd 192.168.0.255 scope global eth0
inet6 2001:1938:145:0:201:29ff:fed1:d551/64 scope global dynamic
valid_lft 86020sec preferred_lft 14020sec
inet6 fe80::201:29ff:fed1:d551/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed
multicast|bytes packets errs drop fifo colls carrier compressed
lo: 560 8 0 0 0 0 0 0
560 8 0 0 0 0 0 0
eth0: 288487 3226 0 0 0 0 0 0
1107253 2509 0 0 0 0 0 0
*** Protocol statistics:
Ip:
3117 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
3115 incoming packets delivered
2469 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
3 active connections openings
2 passive connection openings
0 failed connection attempts
0 connection resets received
2 connections established
3072 segments received
2464 segments send out
0 segments retransmited
0 bad segments received.
3 resets sent
Udp:
28 packets received
0 packets to unknown port received.
0 packet receive errors
28 packets sent
UdpLite:
TcpExt:
1 TCP sockets finished time wait in fast timer
12 delayed acks sent
4 packets directly queued to recvmsg prequeue.
781 packet headers predicted
141 acknowledgments not containing data payload received
1817 predicted acknowledgments
IpExt:
InBcastPkts: 34
InOctets: 230036
OutOctets: 1068460
InBcastOctets: 7034
*** Device features:
eth0: 0x40004829
lo: 0xa01b7c65
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8601 [Apollo
ProMedia] [1106:0601] (rev 05)
Subsystem: VIA Technologies, Inc. VT8601 [Apollo ProMedia] [1106:0601]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 8
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=8 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit-
FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-
FW- Rate=<none>
Kernel driver in use: agpgart-via
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8601 [Apollo
ProMedia AGP] [1106:8601] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR+ INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: ec000000-ed7fffff
Prefetchable memory behind bridge: 18000000-180fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:07.0 ISA bridge [0601]: VIA Technologies, Inc. VT82C686 [Apollo
Super South] [1106:0686] (rev 40)
Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
[1106:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: parport_pc
00:07.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571]
(rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc.
VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
[1106:0571]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Region 0: [virtual] Memory at 000001f0 (32-bit,
non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3,
non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit,
non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3,
non-prefetchable) [size=1]
Region 4: I/O ports at e000 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_via
00:07.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller [1106:3038] (rev 1a) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard
[0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 12
Region 4: I/O ports at e100 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
00:07.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller [1106:3038] (rev 1a) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard
[0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 12
Region 4: I/O ports at e200 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
00:07.4 Bridge [0680]: VIA Technologies, Inc. VT82C686 [Apollo Super
ACPI] [1106:3057] (rev 40)
Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
[1106:3057]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin ? routed to IRQ 9
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:07.5 Multimedia audio controller [0401]: VIA Technologies, Inc.
VT82C686 AC97 Audio Controller [1106:3058] (rev 50)
Subsystem: VIA Technologies, Inc. VT82C686 AC97 Audio
Controller [1106:3058]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at e300 [size=256]
Region 1: I/O ports at e400 [size=4]
Region 2: I/O ports at e500 [size=4]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: VIA 82xx Audio
00:0a.0 Unassigned class [ff00]: National Instruments PCI-6503 [1093:17d0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at ed811000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at ed810000 (32-bit, non-prefetchable) [size=4K]
00:0b.0 Communication controller [0780]: Conexant Systems, Inc. HCF
56k Data/Fax/Voice/Spkp Modem [14f1:1036] (rev 08)
Subsystem: Conexant Systems, Inc. HCF 56k Data/Fax/Voice/Spkp
Modem [14f1:1036]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 10
Region 0: Memory at ed800000 (32-bit, non-prefetchable) [size=64K]
Region 1: I/O ports at e700 [size=8]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:0d.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: DFI Inc Device [15bd:1003]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at ed812000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: 8139too
01:00.0 VGA compatible controller [0300]: Trident Microsystems
CyberBlade/i1 [1023:8500] (rev 6a) (prog-if 00 [VGA controller])
Subsystem: Trident Microsystems CyberBlade/i1 [1023:8500]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=8M]
Region 1: Memory at ed000000 (32-bit, non-prefetchable) [size=128K]
Region 2: Memory at ec800000 (32-bit, non-prefetchable) [size=8M]
[virtual] Expansion ROM at 18000000 [disabled] [size=64K]
Capabilities: [80] AGP version 2.0
Status: RQ=33 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit-
FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-
FW- Rate=<none>
Capabilities: [90] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
** USB devices:
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 3.0.0-rc6-686-pae (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.0.0-rc6-686-pae depends on:
ii debconf [debconf-2.0] 1.5.40 Debian configuration management sy
ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs
ii linux-base 3.3 Linux image base package
ii module-init-tools 3.16-1 tools for managing Linux kernel mo
Versions of packages linux-image-3.0.0-rc6-686-pae recommends:
ii firmware-linux-free 3 Binary firmware for various driver
ii libc6-i686 2.13-10 Embedded GNU C Library: Shared lib
Versions of packages linux-image-3.0.0-rc6-686-pae suggests:
ii grub-pc 1.99-8 GRand Unified Bootloader, version
pn linux-doc-3.0.0 <none> (no description available)
Versions of packages linux-image-3.0.0-rc6-686-pae is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-3.0.0-rc6-686-pae/postinst/ignoring-ramdisk:
linux-image-3.0.0-rc6-686-pae/postinst/depmod-error-initrd-3.0.0-rc6-686-pae:
false
linux-image-3.0.0-rc6-686-pae/prerm/removing-running-kernel-3.0.0-rc6-686-pae:
true
linux-image-3.0.0-rc6-686-pae/postinst/missing-firmware-3.0.0-rc6-686-pae:
Reply to: