[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#632248: closed by Ben Hutchings <ben@decadent.org.uk> (RE: Bug#632248: linux-image-2.6.39-2-amd64: Copying from my external Western Digital hard drive gives "Error splicing file: Input/output error" error)



"I think you can get a replacement with just the serial number:
<http://websupport.wdc.com/warranty/rmainfo.asp?custtype=end&lang=en>."
Thanks!

From: owner@bugs.debian.org
To: denbian@live.com
Subject: Bug#632248 closed by Ben Hutchings <ben@decadent.org.uk> (RE: Bug#632248: linux-image-2.6.39-2-amd64: Copying from my external Western Digital hard drive gives "Error splicing file: Input/output error" error)
Date: Sun, 3 Jul 2011 22:39:04 +0000

This is an automatic notification regarding your Bug report
which was filed against the linux-2.6 package:

#632248: linux-image-2.6.39-2-amd64: Copying from my external Western Digital hard drive gives "Error splicing file: Input/output error" error

It has been closed by Ben Hutchings <ben@decadent.org.uk>.

Their explanation is attached below along with your original report.
If this explanation is unsatisfactory and you have not received a
better one in a separate message then please contact Ben Hutchings <ben@decadent.org.uk> by
replying to this email.


--
632248: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=632248
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems


--Forwarded Message Attachment--
Subject: RE: Bug#632248: linux-image-2.6.39-2-amd64: Copying from my external Western Digital hard drive gives "Error splicing file: Input/output error" error
From: ben@decadent.org.uk
To: 632248-done@bugs.debian.org
Date: Sun, 3 Jul 2011 23:35:19 +0100

On Sun, 2011-07-03 at 18:09 -0400, Deniz Akcal wrote:
> I forgot to post these tests I ran in Windows before reformatting
> using HDDScan (a freeware tool). I'm attaching the test outcomes in a
> zip file.

I was actually referring to the manufacturer's diagnostic program, which
should be available from
<http://support.wdc.com/product/download.asp?wdc_lang=en&fid=wdsfMyPassport_Essential_SE>.

Anyway, this tool seems to have detected new bad sectors. So this is a
hardware fault and not a bug.

[...]
> Is it normal for the drive to work perfectly on its way to death or is
> there still hope for me (and work for you lol)?

This is normal behaviour if there is localised damage to a disk surface
rather than to a head or motor.

> This drive is probably about a year old so I'm really unlucky
> especially since it was a gift and I don't have the receipt.

I think you can get a replacement with just the serial number:
<http://websupport.wdc.com/warranty/rmainfo.asp?custtype=end&lang=en>.

Ben.


--
Ben Hutchings
Computers are not intelligent. They only think they are.


--Forwarded Message Attachment--
From: denbian@live.com
To: submit@bugs.debian.org
Subject: linux-image-2.6.39-2-amd64: Copying from my external Western Digital hard drive gives "Error splicing file: Input/output error" error
Date: Thu, 30 Jun 2011 15:57:39 -0400

Package: linux-2.6
Version: 2.6.39-2
Severity: important


deniz@debian:~$ lsusb | grep Western
Bus 001 Device 005: ID 1058:070a Western Digital Technologies, Inc. My Passport Essential SE
deniz@debian:~$

I am reporting this from Debian Wheezy/Testing but this also happens when using Squeeze's backported 2.6.38 kernel. It even occurs with Squeezes 2.6.32 main stable kernel! It gives
the same or similar errror whether I do it via the CLI or the GNOME UI. I also tried with superuser privileges.

I think that this error causes certain files to not be copied. Reading this Ubuntu thread (http://ubuntuforums.org/showthread.php?t=1500384) leads me to believe that it's an issue
with external drives in general or using ext4. I tried copying using the GNOME UI with the "Skip all" option when confronted with the error and I ended up with certain files missing.
There are many more threads from the looks of it: http://www.scroogle.org/cgi-bin/nbbw.cgi?Gw=Error+splicing+file%3A+Input%2Foutput+error

If more information is needed or if you want me to do some additional testing, just ask.

P.S.
I also think it's likely that this bug carries through to newer kernels than the one I am filing the bug for but I am filing it for this version since this is the latest version that
I have tested since the most recent Linux distro I run is Debian Wheezy/Testing.

-- Package-specific info:
** Version:
Linux version 2.6.39-2-amd64 (Debian 2.6.39-2) (ben@decadent.org.uk) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Wed Jun 8 11:01:04 UTC 2011

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.39-2-amd64 root=/dev/mapper/debian-root ro quiet

** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.

** Kernel log:
[ 6457.609527] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c4 ca a8 00 00 68 00
[ 6457.609541] end_request: critical target error, dev sdc, sector 46451368
[ 6461.034628] sd 4:0:0:0: [sdc] Unhandled sense code
[ 6461.034633] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE
[ 6461.034672] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current]
[ 6461.034679] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error
[ 6461.034686] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c4 dd 80 00 00 f0 00
[ 6461.034700] end_request: critical target error, dev sdc, sector 46456192
[ 6464.393880] sd 4:0:0:0: [sdc] Unhandled sense code
[ 6464.393885] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE
[ 6464.393891] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current]
[ 6464.393898] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error
[ 6464.393905] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c4 dd 80 00 00 80 00
[ 6464.393919] end_request: critical target error, dev sdc, sector 46456192
[ 6467.960006] sd 4:0:0:0: [sdc] Unhandled sense code
[ 6467.960011] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE
[ 6467.960018] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current]
[ 6467.960035] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error
[ 6467.960042] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c4 e3 80 00 00 30 00
[ 6467.960063] end_request: critical target error, dev sdc, sector 46457728
[ 6471.107506] sd 4:0:0:0: [sdc] Unhandled sense code
[ 6471.107512] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE
[ 6471.107518] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current]
[ 6471.107525] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error
[ 6471.107532] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c4 e9 78 00 00 08 00
[ 6471.107546] end_request: critical target error, dev sdc, sector 46459256
[ 6474.546010] sd 4:0:0:0: [sdc] Unhandled sense code
[ 6474.546016] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE
[ 6474.546022] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current]
[ 6474.546029] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error
[ 6474.546036] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c4 ef 70 00 00 58 00
[ 6474.546049] end_request: critical target error, dev sdc, sector 46460784
[ 6477.906011] sd 4:0:0:0: [sdc] Unhandled sense code
[ 6477.906016] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE
[ 6477.906023] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current]
[ 6477.906030] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error
[ 6477.906036] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c4 f5 60 00 00 f0 00
[ 6477.906050] end_request: critical target error, dev sdc, sector 46462304
[ 6480.936386] sd 4:0:0:0: [sdc] Unhandled sense code
[ 6480.936391] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE
[ 6480.936398] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current]
[ 6480.936405] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error
[ 6480.936411] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c4 f5 60 00 00 80 00
[ 6480.936425] end_request: critical target error, dev sdc, sector 46462304
[ 6483.961639] sd 4:0:0:0: [sdc] Unhandled sense code
[ 6483.961644] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE
[ 6483.961651] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current]
[ 6483.961657] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error
[ 6483.961664] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c4 fb 30 00 00 f0 00
[ 6483.961678] end_request: critical target error, dev sdc, sector 46463792
[ 6487.206517] sd 4:0:0:0: [sdc] Unhandled sense code
[ 6487.206523] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE
[ 6487.206529] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current]
[ 6487.206536] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error
[ 6487.206542] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c4 fb 30 00 00 80 00
[ 6487.206556] end_request: critical target error, dev sdc, sector 46463792
[ 6493.659395] sd 4:0:0:0: [sdc] Unhandled sense code
[ 6493.659400] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE
[ 6493.659406] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current]
[ 6493.659413] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error
[ 6493.659420] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c5 50 d8 00 00 f0 00
[ 6493.659434] end_request: critical target error, dev sdc, sector 46485720
[ 6497.561024] sd 4:0:0:0: [sdc] Unhandled sense code
[ 6497.561029] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE
[ 6497.561036] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current]
[ 6497.561043] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error
[ 6497.561050] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c5 50 d8 00 00 80 00
[ 6497.561063] end_request: critical target error, dev sdc, sector 46485720
[ 6502.652274] sd 4:0:0:0: [sdc] Unhandled sense code
[ 6502.652279] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE
[ 6502.652286] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current]
[ 6502.652293] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error
[ 6502.652300] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c4 8d f0 00 00 10 00
[ 6502.652313] end_request: critical target error, dev sdc, sector 46435824
[ 6510.967023] sd 4:0:0:0: [sdc] Unhandled sense code
[ 6510.967029] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE
[ 6510.967035] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current]
[ 6510.967042] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error
[ 6510.967049] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c4 ac 00 00 00 f0 00
[ 6510.967062] end_request: critical target error, dev sdc, sector 46443520
[ 6514.647407] sd 4:0:0:0: [sdc] Unhandled sense code
[ 6514.647412] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE
[ 6514.647419] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current]
[ 6514.647425] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error
[ 6514.647432] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c4 ac 90 00 00 60 00
[ 6514.647446] end_request: critical target error, dev sdc, sector 46443664
[ 6517.915907] sd 4:0:0:0: [sdc] Unhandled sense code
[ 6517.915912] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE
[ 6517.915919] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current]
[ 6517.915926] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error
[ 6517.915933] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c5 8c f0 00 00 f0 00
[ 6517.915946] end_request: critical target error, dev sdc, sector 46501104
[ 6523.852655] sd 4:0:0:0: [sdc] Unhandled sense code
[ 6523.852660] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE
[ 6523.852667] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current]
[ 6523.852674] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error
[ 6523.852680] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c5 8d 70 00 00 70 00
[ 6523.852694] end_request: critical target error, dev sdc, sector 46501232
[ 7081.072997] WARNING! power/level is deprecated; use power/control instead
[ 7081.152420] usb 1-7: USB disconnect, device number 5

** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: P31-S3G
product_version:
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version:
bios_vendor: Award Software International, Inc.
bios_version: F1
board_vendor: Gigabyte Technology Co., Ltd.
board_name: P31-S3G
board_version: x.x

** Loaded modules:
Module Size Used by
sg 25769 0
sr_mod 21824 0
ses 13078 0
enclosure 13307 1 ses
cdrom 35134 1 sr_mod
mperf 12411 0
xt_multiport 12518 1
cpufreq_userspace 12576 0
cpufreq_conservative 13147 0
cpufreq_powersave 12454 0
iptable_filter 12536 1
cpufreq_stats 12713 0
ip_tables 21818 1 iptable_filter
x_tables 18886 3 xt_multiport,iptable_filter,ip_tables
vboxnetadp 13185 0
vboxnetflt 24179 0
vboxdrv 178736 2 vboxnetadp,vboxnetflt
binfmt_misc 12914 1
fuse 61554 1
nfsd 258506 2
nfs 251154 0
lockd 70844 2 nfsd,nfs
fscache 36071 1 nfs
auth_rpcgss 36788 2 nfsd,nfs
nfs_acl 12511 2 nfsd,nfs
sunrpc 162130 6 nfsd,nfs,lockd,auth_rpcgss,nfs_acl
ext3 112254 1
jbd 41698 1 ext3
loop 22479 0
ir_lirc_codec 12747 0
lirc_dev 12925 1 ir_lirc_codec
tea5767 12741 0
ir_sony_decoder 12435 0
tuner 21565 1
ir_jvc_decoder 12433 0
ir_rc6_decoder 12433 0
arc4 12458 2
ir_rc5_decoder 12433 0
ir_nec_decoder 12433 0
ecb 12737 2
cx8800 35465 0
rt61pci 26640 0
crc_itu_t 12347 1 rt61pci
cx88xx 71924 1 cx8800
rc_core 18165 7 ir_lirc_codec,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,ir_nec_decoder,cx88xx
i2c_algo_bit 12834 1 cx88xx
snd_hda_codec_hdmi 22174 1
tveeprom 20593 1 cx88xx
rt2x00pci 12779 1 rt61pci
snd_hda_codec_realtek 283734 1
rt2x00lib 37704 2 rt61pci,rt2x00pci
v4l2_common 13186 3 tuner,cx8800,cx88xx
i2c_i801 16870 0
videodev 66266 4 tuner,cx8800,cx88xx,v4l2_common
media 18148 1 videodev
v4l2_compat_ioctl32 16575 1 videodev
mac80211 181270 2 rt2x00pci,rt2x00lib
snd_hda_intel 25946 3
i2c_core 23766 9 tea5767,tuner,cx8800,cx88xx,i2c_algo_bit,tveeprom,v4l2_common,i2c_i801,videodev
snd_hda_codec 67865 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
psmouse 55199 0
serio_raw 12878 0
fglrx 2678489 91
cfg80211 126244 2 rt2x00lib,mac80211
rfkill 19014 1 cfg80211
snd_hwdep 13148 1 snd_hda_codec
snd_pcm 67276 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_timer 22658 1 snd_pcm
snd 52324 13 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 13014 1 snd
snd_page_alloc 12969 2 snd_hda_intel,snd_pcm
parport_pc 22191 0
rng_core 12614 0
videobuf_dma_sg 13152 2 cx8800,cx88xx
button 12895 1 fglrx
videobuf_core 17804 3 cx8800,cx88xx,videobuf_dma_sg
btcx_risc 12555 2 cx8800,cx88xx
parport 31650 1 parport_pc
pcspkr 12579 0
eeprom_93cx6 12455 1 rt61pci
evdev 17475 8
processor 27431 0
thermal_sys 17939 1 processor
ext4 317160 2
mbcache 12930 2 ext3,ext4
jbd2 65105 1 ext4
crc16 12343 1 ext4
usbhid 39946 0
hid 72745 1 usbhid
dm_mod 62468 11
usb_storage 43639 0
uas 13151 0
sd_mod 35644 3
crc_t10dif 12348 1 sd_mod
ata_generic 12479 0
uhci_hcd 26290 0
ata_piix 25319 2
libata 151572 2 ata_generic,ata_piix
ehci_hcd 39487 0
floppy 56861 0
scsi_mod 161557 7 sg,sr_mod,ses,usb_storage,uas,sd_mod,libata
usbcore 127203 6 usbhid,usb_storage,uas,uhci_hcd,ehci_hcd
r8169 37356 0
mii 12675 1 r8169

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02)
Subsystem: Giga-byte Technology Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f4000000-f5ffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Giga-byte Technology Device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fa000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fa300000-fa4fffff
Prefetchable memory behind bridge: 00000000fa500000-00000000fa6fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f6000000-f7ffffff
Prefetchable memory behind bridge: 00000000fa100000-00000000fa2fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at e300 [size=32]
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e000 [size=32]
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e100 [size=32]
Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at e200 [size=32]
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fa004000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f8000000-f9ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA IDE Controller [8086:27c0] (rev 01) (prog-if 80 [Master])
Subsystem: Giga-byte Technology Device [1458:b002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f000 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 01)
Subsystem: Giga-byte Technology GA-8I945PG-RH Mainboard [1458:5001]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV770 [Radeon HD 4850] [1002:9442] (prog-if 00 [VGA controller])
Subsystem: XFX Pine Group Inc. Device [1682:2470]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at f5000000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at b000 [size=256]
[virtual] Expansion ROM at f4000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci

01:00.1 Audio device [0403]: ATI Technologies Inc HD48x0 audio [1002:aa30]
Subsystem: XFX Pine Group Inc. Device [1682:aa30]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 45
Region 0: Memory at f5010000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at c000 [size=256]
Region 2: Memory at f7000000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at fa100000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169

04:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx8800

04:01.0 Communication controller [0780]: Conexant Systems, Inc. HSF 56k HSFi Modem [14f1:2f00] (rev 01)
Subsystem: Conexant Systems, Inc. Dynalink 56PMi [14f1:2004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=64K]
Region 1: I/O ports at d000 [size=8]
Capabilities: <access denied>

04:02.0 Network controller [0280]: Ralink corp. RT2561/RT61 rev B 802.11g [1814:0302]
Subsystem: Alpha Networks Inc. Device [1948:3c83]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f9010000 (32-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: rt61pci


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 045e:071f Microsoft Corp.


-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.39-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_CA.utf8, LC_CTYPE=en_CA.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.39-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.39 Debian configuration management sy
ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs
ii linux-base 3.2 Linux image base package
ii module-init-tools 3.16-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.39-2-amd64 recommends:
ii firmware-linux-free 3 Binary firmware for various driver

Versions of packages linux-image-2.6.39-2-amd64 suggests:
ii grub-pc 1.99-6 GRand Unified Bootloader, version
pn linux-doc-2.6.39 <none> (no description available)

Versions of packages linux-image-2.6.39-2-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.30 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)

-- debconf information:
linux-image-2.6.39-2-amd64/postinst/ignoring-ramdisk:
* linux-image-2.6.39-2-amd64/postinst/missing-firmware-2.6.39-2-amd64:
linux-image-2.6.39-2-amd64/postinst/depmod-error-initrd-2.6.39-2-amd64: false
linux-image-2.6.39-2-amd64/prerm/removing-running-kernel-2.6.39-2-amd64: true



Reply to: