Package: linux-2.6 Version: 2.6.39-2 Severity: important Hi! Sorry if it's known (didn't find a similar bug in the BTS), but I am experiencing a kernel problem with the GPU. The first time I was running Debian's 2.6.38-5 (dmesg-2.6.38.txt.gz). Second time, with a new kernel, and had the same issue (dmesg-2.6.39.txt.gz). It seems to be somehow reproducible when using LibreOffice and Chromium. What else can I do to help with this, please? Thank you very much! Best regards, Nelson -- Package-specific info: ** Version: Linux version 2.6.39-2-amd64 (Debian 2.6.39-2) (ben@decadent.org.uk) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Wed Jun 8 11:01:04 UTC 2011 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-2-amd64 root=UUID=c73f4307-2dce-4e31-939c-e6cb20668551 ro quiet ** Tainted: O (4096) * Out-of-tree module has been loaded. ** Kernel log: [ 6.379858] scsi5 : pata_atiixp [ 6.380254] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14 [ 6.380257] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15 [ 6.380698] EDAC amd64: DRAM ECC disabled. [ 6.380704] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 6.380706] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 6.380707] (Note that use of the override may cause unknown side effects.) [ 6.380764] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.543834] hda_codec: ALC883: BIOS auto-probing. [ 6.548677] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input2 [ 6.568041] usb 2-1: new low speed USB device number 2 using ohci_hcd [ 6.597658] [drm] radeon: ring at 0x00000000B0001000 [ 6.597679] [drm] ring test succeeded in 1 usecs [ 6.597780] [drm] radeon: ib pool ready. [ 6.597856] [drm] ib test succeeded in 0 usecs [ 6.598065] [drm] Radeon Display Connectors [ 6.598067] [drm] Connector 0: [ 6.598068] [drm] VGA [ 6.598070] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 6.598071] [drm] Encoders: [ 6.598073] [drm] CRT1: INTERNAL_DAC1 [ 6.598074] [drm] Connector 1: [ 6.598076] [drm] S-video [ 6.598077] [drm] Encoders: [ 6.598078] [drm] TV1: INTERNAL_DAC2 [ 6.598079] [drm] Connector 2: [ 6.598080] [drm] DVI-I [ 6.598081] [drm] HPD1 [ 6.598083] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 6.598084] [drm] Encoders: [ 6.598086] [drm] CRT2: INTERNAL_DAC2 [ 6.598087] [drm] DFP1: INTERNAL_TMDS1 [ 6.720078] usbcore: registered new interface driver usbserial [ 6.720098] USB Serial support registered for generic [ 6.735054] usb 2-1: New USB device found, idVendor=093a, idProduct=2510 [ 6.735057] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.735060] usb 2-1: Product: USB OPTICAL MOUSE [ 6.735061] usb 2-1: Manufacturer: PIXART [ 6.835281] [drm] fb mappable at 0xD00C0000 [ 6.835283] [drm] vram apper at 0xD0000000 [ 6.835284] [drm] size 5898240 [ 6.835285] [drm] fb depth is 24 [ 6.835286] [drm] pitch is 5760 [ 6.835360] fbcon: radeondrmfb (fb0) is primary device [ 6.941965] Console: switching to colour frame buffer device 160x56 [ 6.946310] fb0: radeondrmfb frame buffer device [ 6.946312] drm: registered panic notifier [ 6.946317] [drm] Initialized radeon 2.9.0 20080528 for 0000:01:00.0 on minor 0 [ 7.000038] usb 2-2: new low speed USB device number 3 using ohci_hcd [ 7.108310] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input3 [ 7.108418] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:13.0-1/input0 [ 7.108439] usbcore: registered new interface driver usbhid [ 7.108441] usbhid: USB HID core driver [ 7.169053] usb 2-2: New USB device found, idVendor=413c, idProduct=2003 [ 7.169057] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.169059] usb 2-2: Product: Dell USB Keyboard [ 7.169061] usb 2-2: Manufacturer: Dell [ 7.180138] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input4 [ 7.180240] generic-usb 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:13.0-2/input0 [ 7.180341] usbcore: registered new interface driver usbserial_generic [ 7.180344] usbserial: USB Serial Driver core [ 7.294571] USB Serial support registered for GSM modem (1-port) [ 7.294623] usbcore: registered new interface driver option [ 7.294624] option: v0.7.2:USB Driver for GSM modems [ 7.746899] kvm: Nested Virtualization enabled [ 8.768112] Adding 3929084k swap on /dev/sda3. Priority:-1 extents:1 across:3929084k [ 8.771838] EXT4-fs (sda1): re-mounted. Opts: (null) [ 8.964069] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 9.134453] loop: module loaded [ 9.548809] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 10.605112] fuse init (API version 7.16) [ 11.371403] Disabling lock debugging due to kernel taint [ 11.399749] vboxdrv: Found 2 processor cores. [ 11.399969] vboxdrv: fAsync=1 offMin=0x4022 offMax=0x4022 [ 11.400091] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. [ 11.400093] vboxdrv: Successfully loaded version 4.0.8_Debian (interface 0x00180000). [ 11.797676] r8169 0000:02:00.0: eth0: link down [ 11.797682] r8169 0000:02:00.0: eth0: link down [ 11.798234] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.860359] lp0: using parport0 (interrupt-driven). [ 14.084026] ppdev: user-space parallel port driver [ 14.266259] r8169 0000:02:00.0: eth0: link up [ 14.266801] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 18.226552] Bridge firewalling registered [ 18.588231] ip_tables: (C) 2000-2006 Netfilter Core Team [ 18.719700] ADDRCONF(NETDEV_UP): virbr0: link is not ready [ 18.775825] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ (2 cpu cores) (version 2.20.00) [ 18.775877] powernow-k8: fid 0x15 (2900 MHz), vid 0x7 [ 18.775879] powernow-k8: fid 0x14 (2800 MHz), vid 0x8 [ 18.775881] powernow-k8: fid 0x12 (2600 MHz), vid 0xa [ 18.775882] powernow-k8: fid 0x10 (2400 MHz), vid 0xc [ 18.775884] powernow-k8: fid 0xe (2200 MHz), vid 0xe [ 18.775886] powernow-k8: fid 0xc (2000 MHz), vid 0x10 [ 18.775888] powernow-k8: fid 0xa (1800 MHz), vid 0x10 [ 18.775889] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 [ 18.831464] tun: Universal TUN/TAP device driver, 1.6 [ 18.831468] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 18.831868] libvirtd[1340]: segfault at d ip 00007fb07a9d16b1 sp 00007fffba366988 error 4 in libc-2.13.so[7fb07a955000+17a000] [ 25.603244] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 25.742289] EXT4-fs (sda2): re-mounted. Opts: commit=0 ** Model information sys_vendor: Itautec S.A. product_name: Infoway product_version: Corp chassis_vendor: Chassis Manufacture chassis_version: Chassis Version bios_vendor: Itautec SM 3321 BIOS bios_version: Itautec SM 3321 BIOS Revision 0204 board_vendor: Itautec S.A. board_name: SM 3321 board_version: SM-3321 Padrao 04(Itautec_M) ** Loaded modules: Module Size Used by tun 18084 0 powernow_k8 17321 1 mperf 12411 1 powernow_k8 cpufreq_conservative 13147 0 cpufreq_userspace 12576 0 ipt_REJECT 12465 0 cpufreq_stats 12713 0 cpufreq_powersave 12454 0 xt_tcpudp 12527 0 iptable_filter 12536 0 ip_tables 21818 1 iptable_filter x_tables 18886 4 ipt_REJECT,xt_tcpudp,iptable_filter,ip_tables bridge 65573 0 stp 12392 1 bridge ppdev 12725 0 lp 17190 0 vboxnetadp 13185 0 vboxnetflt 24179 0 vboxdrv 178736 2 vboxnetadp,vboxnetflt binfmt_misc 12914 1 fuse 61554 1 loop 22479 0 kvm_amd 50543 0 kvm 263518 1 kvm_amd option 24802 0 usb_wwan 17206 1 option usbhid 39946 0 hid 72745 1 usbhid usbserial 31986 2 option,usb_wwan ata_generic 12479 0 snd_hda_codec_realtek 283734 1 sg 25769 0 radeon 743019 2 snd_hda_intel 25946 0 ttm 52224 1 radeon drm_kms_helper 26950 1 radeon sr_mod 21824 0 cdrom 35134 1 sr_mod snd_hda_codec 67865 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13148 1 snd_hda_codec drm 166500 4 radeon,ttm,drm_kms_helper edac_core 35344 0 snd_pcm 67276 2 snd_hda_intel,snd_hda_codec pata_atiixp 12689 0 edac_mce_amd 17103 0 snd_seq 44678 0 snd_timer 22658 2 snd_pcm,snd_seq snd_seq_device 13155 1 snd_seq snd 52324 8 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device ohci_hcd 26362 0 soundcore 13014 1 snd ehci_hcd 39487 0 k8temp 12531 0 parport_pc 22191 1 r8169 37356 0 mii 12675 1 r8169 i2c_piix4 12536 0 i2c_algo_bit 12834 1 radeon snd_page_alloc 12969 2 snd_hda_intel,snd_pcm power_supply 13475 1 radeon usbcore 127203 7 option,usb_wwan,usbhid,usbserial,ohci_hcd,ehci_hcd i2c_core 23766 5 radeon,drm_kms_helper,drm,i2c_piix4,i2c_algo_bit psmouse 55199 0 parport 31650 3 ppdev,lp,parport_pc serio_raw 12878 0 evdev 17475 7 floppy 56861 0 button 12895 0 processor 27431 1 powernow_k8 ext4 317160 2 mbcache 12930 1 ext4 jbd2 65105 1 ext4 crc16 12343 1 ext4 dm_mod 62468 0 sd_mod 35644 4 crc_t10dif 12348 1 sd_mod ahci 25089 3 libahci 22616 1 ahci libata 151572 4 ata_generic,pata_atiixp,ahci,libahci thermal 17330 0 scsi_mod 161557 4 sg,sr_mod,sd_mod,libata fan 12674 0 thermal_sys 17939 3 processor,fan,thermal ** PCI devices: 00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910] Subsystem: ASUSTeK Computer Inc. Device [1043:826d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 64 00:02.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Graphics Port 0) [1002:7913] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fdb00000-fdbfffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:07.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) [1002:7917] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at ff00 [size=8] Region 1: I/O ports at fe00 [size=4] Region 2: I/O ports at fd00 [size=8] Region 3: I/O ports at fc00 [size=4] Region 4: I/O ports at fb00 [size=16] Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 19 Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: I/O ports at 0b00 [size=16] Capabilities: <access denied> Kernel driver in use: piix4_smbus 00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at f900 [size=16] Kernel driver in use: pata_atiixp 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] Subsystem: ASUSTeK Computer Inc. Device [1043:8349] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe020000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d] Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: fdd00000-fddfffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k8temp 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV410 [Radeon X700 (PCIE)] [1002:5e4d] (prog-if 00 [VGA controller]) Subsystem: Info-Tek Corp. Device [18bc:0870] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 43 Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at fdbf0000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at de00 [size=256] Expansion ROM at fdbc0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: radeon 01:00.1 Display controller [0380]: ATI Technologies Inc RV410 [Radeon X700 (PCIE)] (Secondary) [1002:5e6d] Subsystem: Info-Tek Corp. Device [18bc:0871] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Region 0: Memory at fdbe0000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01) Subsystem: ASUSTeK Computer Inc. Device [1043:8168] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 42 Region 0: I/O ports at ee00 [size=256] Region 2: Memory at fdfff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fdc00000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse Bus 002 Device 003: ID 413c:2003 Dell Computer Corp. Keyboard -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (100, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.39-2-amd64 (SMP w/2 CPU cores) Locale: LANG=pt_BR.utf8, LC_CTYPE=pt_BR.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.39-2-amd64 depends on: ii debconf [debconf-2.0] 1.5.40 Debian configuration management sy ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs ii linux-base 3.2 Linux image base package ii module-init-tools 3.16-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.39-2-amd64 recommends: ii firmware-linux-free 3 Binary firmware for various driver Versions of packages linux-image-2.6.39-2-amd64 suggests: ii grub-pc 1.99-6 GRand Unified Bootloader, version pn linux-doc-2.6.39 <none> (no description available) Versions of packages linux-image-2.6.39-2-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) ii firmware-linux 0.30 Binary firmware for various driver ii firmware-linux-nonfree 0.30 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.39-2-amd64/postinst/depmod-error-initrd-2.6.39-2-amd64: false linux-image-2.6.39-2-amd64/postinst/ignoring-ramdisk: linux-image-2.6.39-2-amd64/prerm/removing-running-kernel-2.6.39-2-amd64: true * linux-image-2.6.39-2-amd64/postinst/missing-firmware-2.6.39-2-amd64:
Attachment:
dmesg-2.6.38.txt.gz
Description: GNU Zip compressed data
Attachment:
dmesg-2.6.39.txt.gz
Description: GNU Zip compressed data