Package: linux-2.6 Version: 2.6.38-2 Severity: normal After upgrade from 2.6.37 to 2.6.38 (linux-image-2.6.38-1-686-bigmem) a lot of kernel crashes started to occur (when exiting Flash full-screen mode). They still occur with linux-image-2.6.38-2-686-bigmem. I've included (using reportbug's "-A" option, I hope this worked) a photo of monitor displaying kernel messages after such crash. Crashes happen consistently when I try to exit Adobe Flash full-screen mode (e.g. on YouTube videos) by pressing "Esc" on keyboard. In no other situation I managed to crash my system. After a crash soundcard is playing a short sample repeatedly (infinite loop) - probably last sample from buffer. Crashes do not happen on every exit, however I didn't manage to do more than 5-10 consecutive exits from Flash full-screen without a crash. So, with 2.6.38 I get several crashes a day. Problem seems not to occur with 'linux-image-2.6.37-2-686-bigmem'. I run this older version for a few days now, with rest of the system the same as with 2.6.38 kernel, and system is perfectly stable. I have Core2Duo E6600 with 4GB of RAM. System is built on Gigabyte's GA-EP45-UD3LR mainboard. Graphics card, which probably plays most part in these crashes, is PCI-E Sapphire Radeon HD4850 1G DDR3 It has connected an LCD (1920x1200) monitor via DVI. I also use Creative Sound Blaster Live! Value soundcard (not the one embedded on motherboard). I use Iceweasel (3.5.18-1) with flashplugin-nonfree. Today after reboot (when I was comparing 2.6.37 to 2.6.38), I saw this message in dmesg output (on 2.6.38 kernel): """ (...) [ 30.922412] Bluetooth: BNEP filters: protocol multicast [ 31.117945] lp: driver loaded but no devices found [ 31.161153] ppdev: user-space parallel port driver [ 31.570187] Bluetooth: SCO (Voice Link) ver 0.6 [ 31.570189] Bluetooth: SCO socket layer initialized [ 1035.829667] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 64 [ 1035.829670] [drm:drm_edid_block_valid] *ERROR* Raw EDID: [ 1035.829673] <3>00 ff ff ff ff ff ff 00 22 f0 f7 26 01 01 01 01 ........"..&.... [ 1035.829675] <3>1d 12 01 03 80 36 23 38 ae 8e 10 a3 14 0c 99 26 .....6#8.......& [ 1035.829677] <3>0f 10 14 a5 2b 80 81 00 a9 00 a9 00 b3 00 91 00 ....+........... [ 1035.829679] <3>01 01 01 01 01 01 28 3c 80 a0 30 b0 23 00 30 20 ......(<..0.#.0 [ 1035.829681] <3>36 00 22 20 21 00 00 1a 00 00 00 bc 00 08 10 20 6." !.......... [ 1035.829682] <3>0c 10 32 34 37 35 37 0a 20 20 00 00 00 bd 00 30 ..24757. .....0 [ 1035.829684] <3>15 1e 1e 11 00 0a 20 20 20 20 20 20 00 00 00 bf ...... .... [ 1035.829686] <3>00 03 0e 03 38 32 39 30 18 12 17 0a 20 20 00 2a ....8290.... .* [ 1035.829688] """ I can't find more EDID-related messages in "kern.log*" files. -- Package-specific info: ** Version: Linux version 2.6.38-2-686-bigmem (Debian 2.6.38-2) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-14) ) #1 SMP Tue Mar 29 18:09:13 UTC 2011 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.38-2-686-bigmem root=UUID=209b3c11-3b42-4715-88b0-95864dbde671 ro quiet ** Tainted: O (4096) * Out-of-tree module has been loaded. ** Kernel log: [ 7.171237] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 7.171864] [drm] Loading RV770 Microcode [ 7.520941] radeon 0000:01:00.0: WB enabled [ 7.566879] [drm] ring test succeeded in 1 usecs [ 7.566998] [drm] radeon: ib pool ready. [ 7.567061] [drm] ib test succeeded in 0 usecs [ 7.567063] [drm] Enabling audio support [ 7.567070] failed to evaluate ATIF got AE_BAD_PARAMETER [ 7.567082] HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=0 [ 7.567316] [drm] Radeon Display Connectors [ 7.567318] [drm] Connector 0: [ 7.567319] [drm] DVI-I [ 7.567320] [drm] HPD2 [ 7.567322] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c [ 7.567324] [drm] Encoders: [ 7.567325] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 7.567327] [drm] DFP2: INTERNAL_KLDSCP_LVTMA [ 7.567328] [drm] Connector 1: [ 7.567329] [drm] HDMI-A [ 7.567330] [drm] HPD3 [ 7.567332] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 7.567334] [drm] Encoders: [ 7.567335] [drm] DFP1: INTERNAL_UNIPHY [ 7.567337] [drm] Connector 2: [ 7.567338] [drm] VGA [ 7.567343] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c [ 7.567343] [drm] Encoders: [ 7.567343] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 7.623648] [drm] Internal thermal controller with fan control [ 7.623697] [drm] radeon: power management initialized [ 7.708447] [drm] fb mappable at 0xD0142000 [ 7.708449] [drm] vram apper at 0xD0000000 [ 7.708451] [drm] size 9216000 [ 7.708452] [drm] fb depth is 24 [ 7.708453] [drm] pitch is 7680 [ 8.127484] Console: switching to colour frame buffer device 240x75 [ 8.134787] fb0: radeondrmfb frame buffer device [ 8.134788] drm: registered panic notifier [ 8.134799] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:00.0 on minor 0 [ 9.030755] EXT3-fs (sdb6): using internal journal [ 9.283648] Uniform Multi-Platform E-IDE driver [ 9.365057] ide-cd driver 5.00 [ 9.378737] ide-gd driver 1.18 [ 9.391603] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 9.391613] Probing IDE interface ide0... [ 9.952109] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 9.952127] Probing IDE interface ide1... [ 10.512174] ide1 at 0x170-0x177,0x376 on irq 15 [ 10.591165] Disabling lock debugging due to kernel taint [ 10.615660] vboxdrv: Found 2 processor cores. [ 10.615993] vboxdrv: fAsync=0 offMin=0x2a3 offMax=0x8dc [ 10.616057] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 10.616059] vboxdrv: Successfully loaded version 4.0.4_OSE (interface 0x00160000). [ 10.653710] coretemp coretemp.0: TjMax is assumed as 100 C! [ 10.653770] coretemp coretemp.1: TjMax is assumed as 100 C! [ 10.676253] it87: Found IT8718F chip at 0x290, revision 5 [ 10.676261] it87: VID is disabled (pins used for GPIO) [ 10.676270] it87: Beeping is supported [ 12.421261] Adding 1048572k swap on /swapfile1. Priority:-1 extents:266 across:1082608k [ 13.457726] EXT3-fs: barriers not enabled [ 13.457881] kjournald starting. Commit interval 5 seconds [ 13.458050] EXT3-fs (sdb1): using internal journal [ 13.458055] EXT3-fs (sdb1): mounted filesystem with ordered data mode [ 13.466043] EXT3-fs: barriers not enabled [ 13.466209] kjournald starting. Commit interval 5 seconds [ 13.466393] EXT3-fs (sdb5): using internal journal [ 13.466397] EXT3-fs (sdb5): mounted filesystem with ordered data mode [ 13.474768] EXT3-fs: barriers not enabled [ 13.474951] kjournald starting. Commit interval 5 seconds [ 13.475318] EXT3-fs (sdb7): using internal journal [ 13.475321] EXT3-fs (sdb7): mounted filesystem with ordered data mode [ 13.579028] fuse init (API version 7.16) [ 14.683440] r8169 0000:04:00.0: eth0: link down [ 14.683450] r8169 0000:04:00.0: eth0: link down [ 14.683569] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.467780] r8169 0000:04:00.0: eth0: link up [ 17.467926] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 20.404336] microcode: CPU0 sig=0x6f6, pf=0x1, revision=0xcb [ 20.421357] microcode: CPU1 sig=0x6f6, pf=0x1, revision=0xcb [ 20.425227] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 20.542897] microcode: CPU0 updated to revision 0xd0, date = 2010-09-30 [ 20.543252] microcode: CPU1 updated to revision 0xd0, date = 2010-09-30 [ 20.780053] zfs-fuse (1584): /proc/1615/oom_adj is deprecated, please use /proc/1615/oom_score_adj instead. [ 22.371576] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input6 [ 26.745970] Bluetooth: Core ver 2.15 [ 26.745987] NET: Registered protocol family 31 [ 26.745989] Bluetooth: HCI device and connection manager initialized [ 26.745991] Bluetooth: HCI socket layer initialized [ 26.871732] Bluetooth: L2CAP ver 2.15 [ 26.871734] Bluetooth: L2CAP socket layer initialized [ 27.002464] Bluetooth: RFCOMM TTY layer initialized [ 27.002467] Bluetooth: RFCOMM socket layer initialized [ 27.002469] Bluetooth: RFCOMM ver 1.11 [ 27.022969] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 27.022971] Bluetooth: BNEP filters: protocol multicast [ 27.064256] Bluetooth: SCO (Voice Link) ver 0.6 [ 27.064258] Bluetooth: SCO socket layer initialized [ 27.616060] eth0: no IPv6 routers present [ 27.642601] lp: driver loaded but no devices found [ 27.652276] ppdev: user-space parallel port driver ** Model information not available ** Loaded modules: Module Size Used by parport_pc 21895 0 ppdev 12621 0 lp 12858 0 parport 27018 3 parport_pc,ppdev,lp sco 13219 2 bnep 17147 2 rfcomm 31960 0 l2cap 35435 6 bnep,rfcomm crc16 12327 1 l2cap bluetooth 50119 6 sco,bnep,rfcomm,l2cap rfkill 18510 3 bluetooth snd_hrtimer 12540 1 vboxnetadp 13120 0 binfmt_misc 12778 1 uinput 12984 1 microcode 13213 0 fuse 55640 3 it87 17868 0 hwmon_vid 12364 1 it87 coretemp 12680 0 vboxnetflt 23683 0 vboxdrv 147237 2 vboxnetadp,vboxnetflt firewire_sbp2 17511 0 firewire_core 42274 1 firewire_sbp2 crc_itu_t 12331 1 firewire_core psmouse 45863 0 ide_generic 8209 0 [permanent] ide_gd_mod 27392 0 ide_cd_mod 30187 0 ide_core 65480 3 ide_generic,ide_gd_mod,ide_cd_mod dm_crypt 17809 0 snd_emu10k1_synth 12872 0 snd_emux_synth 27879 1 snd_emu10k1_synth radeon 682516 2 ttm 46672 1 radeon snd_seq_virmidi 13001 1 snd_emux_synth snd_seq_midi_emul 12613 1 snd_emux_synth snd_emu10k1 109281 2 snd_emu10k1_synth snd_hda_codec_hdmi 21857 1 snd_ac97_codec 83645 1 snd_emu10k1 drm_kms_helper 26501 1 radeon snd_hda_intel 21529 0 snd_hda_codec 57563 2 snd_hda_codec_hdmi,snd_hda_intel ac97_bus 12462 1 snd_ac97_codec drm 128416 4 radeon,ttm,drm_kms_helper tpm_tis 12949 0 tpm 17454 1 tpm_tis snd_util_mem 12624 2 snd_emux_synth,snd_emu10k1 snd_seq_midi 12744 0 snd_hwdep 12906 3 snd_emux_synth,snd_emu10k1,snd_hda_codec snd_rawmidi 22407 3 snd_seq_virmidi,snd_emu10k1,snd_seq_midi snd_pcm_oss 35864 0 snd_mixer_oss 17649 1 snd_pcm_oss snd_seq_midi_event 13124 2 snd_seq_virmidi,snd_seq_midi snd_seq 39172 6 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_midi,snd_seq_midi_event snd_pcm 52774 6 snd_emu10k1,snd_hda_codec_hdmi,snd_ac97_codec,snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_device 12995 5 snd_emu10k1_synth,snd_emu10k1,snd_seq_midi,snd_rawmidi,snd_seq snd_timer 22171 4 snd_hrtimer,snd_emu10k1,snd_seq,snd_pcm tpm_bios 12799 1 tpm i2c_i801 12670 0 emu10k1_gp 12436 0 processor 26983 2 i2c_algo_bit 12706 1 radeon gameport 13332 2 emu10k1_gp snd 38153 18 snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_hda_codec_hdmi,snd_ac97_codec,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_rawmidi,snd_pcm_oss,snd_mixer_oss,snd_seq,snd_pcm,snd_seq_device,snd_timer snd_page_alloc 12841 3 snd_emu10k1,snd_hda_intel,snd_pcm i2c_core 18989 5 radeon,drm_kms_helper,drm,i2c_i801,i2c_algo_bit power_supply 13283 1 radeon pcspkr 12515 0 serio_raw 12758 0 evdev 13084 11 soundcore 12878 1 snd button 12866 0 thermal_sys 17667 1 processor ext3 98001 4 jbd 40818 1 ext3 mbcache 12810 1 ext3 dm_mod 56394 1 dm_crypt sg 21385 0 sr_mod 17418 0 sd_mod 34941 7 crc_t10dif 12332 1 sd_mod cdrom 34631 2 ide_cd_mod,sr_mod ata_generic 12439 0 usbhid 35168 0 hid 59736 1 usbhid uhci_hcd 21850 0 ahci 20897 5 pata_jmicron 12432 0 libahci 22161 1 ahci ehci_hcd 34919 0 libata 131904 4 ata_generic,ahci,pata_jmicron,libahci r8169 36366 0 usbcore 99058 4 usbhid,uhci_hcd,ehci_hcd scsi_mod 134369 5 firewire_sbp2,sg,sr_mod,sd_mod,libata mii 12562 1 r8169 floppy 47893 0 nls_base 12649 1 usbcore ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e20] (rev 03) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e21] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: e4000000-e5ffffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at e000 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at e100 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at e500 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at e8100000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: e8200000-e83fffff Prefetchable memory behind bridge: 00000000e8400000-00000000e85fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: e6000000-e6ffffff Prefetchable memory behind bridge: 00000000e8600000-00000000e87fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 [8086:3a4a] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: e7000000-e7ffffff Prefetchable memory behind bridge: 00000000e8000000-00000000e80fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at e200 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at e300 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at e400 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at e8101000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16] Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5001] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller [8086:3a22] (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b005] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 45 Region 0: I/O ports at e600 [size=8] Region 1: I/O ports at e700 [size=4] Region 2: I/O ports at e800 [size=8] Region 3: I/O ports at e900 [size=4] Region 4: I/O ports at ea00 [size=32] Region 5: Memory at e8102000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30] Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5001] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at e8103000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0500 [size=32] Kernel driver in use: i801_smbus 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV770 [Radeon HD 4850] [1002:9442] (prog-if 00 [VGA controller]) Subsystem: PC Partner Limited Device [174b:e104] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 47 Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at e5000000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at a000 [size=256] [virtual] Expansion ROM at e4000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: radeon 01:00.1 Audio device [0403]: ATI Technologies Inc HD48x0 audio [1002:aa30] Subsystem: PC Partner Limited Sapphire HD 4850 512MB GDDR3 PCI-E Dual Slot Fansink [174b:aa30] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 46 Region 0: Memory at e5010000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 03:00.0 IDE interface [0101]: JMicron Technology Corp. JMB368 IDE controller [197b:2368] (prog-if 85 [Master SecO PriO]) Subsystem: Giga-byte Technology Device [1458:b000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at b000 [size=8] Region 1: I/O ports at b100 [size=4] Region 2: I/O ports at b200 [size=8] Region 3: I/O ports at b300 [size=4] Region 4: I/O ports at b400 [size=16] Capabilities: <access denied> Kernel driver in use: pata_jmicron 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 44 Region 0: I/O ports at c000 [size=256] Region 2: Memory at e8010000 (64-bit, prefetchable) [size=4K] Region 4: Memory at e8000000 (64-bit, prefetchable) [size=64K] [virtual] Expansion ROM at e8020000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 05:01.0 Multimedia audio controller [0401]: Creative Labs SB Live! EMU10k1 [1102:0002] (rev 08) Subsystem: Creative Labs CT4832 SBLive! Value [1102:8027] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 5000ns max) Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at d000 [size=32] Capabilities: <access denied> Kernel driver in use: EMU10K1_Audigy 05:01.1 Input device controller [0980]: Creative Labs SB Live! Game Port [1102:7002] (rev 08) Subsystem: Creative Labs Gameport Joystick [1102:0020] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Region 0: I/O ports at d100 [size=8] Capabilities: <access denied> Kernel driver in use: Emu10k1_gameport ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 03f0:2f24 Hewlett-Packard LP2475w Monitor Hub Bus 004 Device 002: ID 045e:0095 Microsoft Corp. IntelliMouse Explorer 4.0 (IntelliPoint) Bus 005 Device 002: ID 413c:2003 Dell Computer Corp. Keyboard -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.38-2-686-bigmem (SMP w/2 CPU cores) Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.38-2-686-bigmem depends on: ii debconf [debconf-2.0] 1.5.38 Debian configuration management sy ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs ii linux-base 3.2 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.38-2-686-bigmem recommends: ii firmware-linux-free 3 Binary firmware for various driver ii libc6-i686 2.11.2-11 Embedded GNU C Library: Shared lib Versions of packages linux-image-2.6.38-2-686-bigmem suggests: ii grub-pc 1.99~rc1-8 GRand Unified Bootloader, version pn linux-doc-2.6.38 <none> (no description available) Versions of packages linux-image-2.6.38-2-686-bigmem is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) ii firmware-linux 0.29 Binary firmware for various driver ii firmware-linux-nonfree 0.29 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.38-2-686-bigmem/postinst/ignoring-do-bootloader-2.6.38-2-686-bigmem: * linux-image-2.6.38-2-686-bigmem/postinst/missing-firmware-2.6.38-2-686-bigmem: linux-image-2.6.38-2-686-bigmem/prerm/removing-running-kernel-2.6.38-2-686-bigmem: true linux-image-2.6.38-2-686-bigmem/postinst/depmod-error-initrd-2.6.38-2-686-bigmem: false
Attachment:
oops.jpg
Description: JPEG image
