Bug#594938: linux-image-2.6.32-5-686: Microsoft InteliMouse (PS/2) wheel broken
Package: linux-2.6
Version: 2.6.32-21
Severity: normal
Tags: sid
Hi,
My mouse's (MS Intelimouse, PS/2 with a wheel) wheel stopped working since the
last upgrade: pressing or scrolling the wheel does nothing, at all. xev does
not see the event, but I cannot see it either with "cat /dev/psaux" or "cat
/dev/input/mouse0", while both show fancy characters when pressing the other
buttons.
Rebooting and chosing older kernel versions (2.6.30 or even 2.6.32-trunk-686)
solves the problem.
Thanks,
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-21) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Wed Aug 25 14:28:12 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=777ca468-3cbc-461a-8ee6-424a3f1ee7f0 ro quiet
** Not tainted
** Kernel log:
[ 1.975417] usb 2-1: Product: DeskJet 920C
[ 1.975419] usb 2-1: Manufacturer: Hewlett-Packard
[ 1.975422] usb 2-1: SerialNumber: HU19T6R0HKBI
[ 1.975512] usb 2-1: configuration #1 chosen from 1 choice
[ 3.341478] udev: starting version 161
[ 3.726324] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 3.879776] ACPI: SSDT bf5ed720 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 3.880090] processor LNXCPU:00: registered as cooling_device0
[ 3.880249] ACPI: SSDT bf5edbe0 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 3.880281] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 3.880317] ACPI: Power Button [PWRB]
[ 3.880849] processor LNXCPU:01: registered as cooling_device1
[ 3.880897] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.880922] ACPI: Power Button [PWRF]
[ 4.223091] psmouse.c: bad data from KBC - timeout
[ 4.274107] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.353127] psmouse.c: bad data from KBC - timeout
[ 4.353742] [drm] Initialized drm 1.1.0 20060810
[ 4.381799] psmouse.c: bad data from KBC - timeout
[ 4.410469] psmouse.c: bad data from KBC - timeout
[ 4.439139] psmouse.c: bad data from KBC - timeout
[ 4.467807] psmouse.c: bad data from KBC - timeout
[ 4.496476] psmouse.c: bad data from KBC - timeout
[ 4.525148] psmouse.c: bad data from KBC - timeout
[ 4.553818] psmouse.c: bad data from KBC - timeout
[ 4.578212] intel_rng: FWH not detected
[ 4.582487] psmouse.c: bad data from KBC - timeout
[ 4.587386] parport_pc 00:09: reported by Plug and Play ACPI
[ 4.587426] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 4.612366] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
[ 4.638691] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.638696] i915 0000:00:02.0: setting latency timer to 64
[ 4.642336] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 4.642339] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 4.642386] i915 0000:00:02.0: irq 26 for MSI/MSI-X
[ 4.642391] [drm] set up 7M of stolen space
[ 4.642642] [drm] initialized overlay support
[ 4.706408] Linux video capture interface: v2.00
[ 4.849898] bttv: driver version 0.9.18 loaded
[ 4.849900] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 4.849929] bttv: Bt8xx card found (0).
[ 4.849938] bttv 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.849946] bttv0: Bt848 (rev 18) at 0000:03:01.0, irq: 19, latency: 32, mmio: 0xe0200000
[ 4.852522] bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
[ 4.852524] IRQ 19/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
[ 4.852547] bttv0: gpio: en=00000000, out=00000000 in=00ff27ff [init]
[ 4.853279] tveeprom 2-0050: Huh, no eeprom present (err=-6)?
[ 4.853280] bttv0: tuner type unset
[ 4.853337] bttv0: registered device video0
[ 4.853380] bttv0: registered device vbi0
[ 4.907665] Console: switching to colour frame buffer device 200x75
[ 4.915303] fb0: inteldrmfb frame buffer device
[ 4.915305] registered panic notifier
[ 4.915329] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 5.242261] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x1504
[ 5.242282] usbcore: registered new interface driver usblp
[ 5.391884] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.391908] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.472707] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 6.264324] Adding 1951888k swap on /dev/sdb2. Priority:-1 extents:1 across:1951888k
[ 6.536163] usb-storage: device scan complete
[ 6.536658] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 6.537161] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 6.537690] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 6.538162] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 6.538752] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 6.539103] sd 4:0:0:1: Attached scsi generic sg4 type 0
[ 6.539315] sd 4:0:0:2: Attached scsi generic sg5 type 0
[ 6.539529] sd 4:0:0:3: Attached scsi generic sg6 type 0
[ 6.673634] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[ 6.674258] sd 4:0:0:3: [sdf] Attached SCSI removable disk
[ 6.674883] sd 4:0:0:2: [sde] Attached SCSI removable disk
[ 6.675504] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 6.697098] loop: module loaded
[ 6.806712] it87: Found IT8718F chip at 0x290, revision 5
[ 6.806722] it87: in3 is VCC (+5V)
[ 7.952099] EXT4-fs (sdb3): mounted filesystem with ordered data mode
[ 8.230901] kjournald starting. Commit interval 5 seconds
[ 8.231167] EXT3 FS on sdb4, internal journal
[ 8.231172] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.286570] kjournald starting. Commit interval 5 seconds
[ 8.286573] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 8.286753] EXT3 FS on sda2, internal journal
[ 8.286756] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.939650] atl1c 0000:02:00.0: irq 27 for MSI/MSI-X
[ 8.939745] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 9.096468] fuse init (API version 7.13)
[ 13.282714] Bluetooth: Core ver 2.15
[ 13.282757] NET: Registered protocol family 31
[ 13.282759] Bluetooth: HCI device and connection manager initialized
[ 13.282762] Bluetooth: HCI socket layer initialized
[ 13.302681] Bluetooth: L2CAP ver 2.14
[ 13.302684] Bluetooth: L2CAP socket layer initialized
[ 13.357623] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.357626] Bluetooth: BNEP filters: protocol multicast
[ 13.561836] Bluetooth: SCO (Voice Link) ver 0.6
[ 13.561839] Bluetooth: SCO socket layer initialized
[ 13.929971] lp0: using parport0 (interrupt-driven).
[ 13.955225] ppdev: user-space parallel port driver
[ 16.043448] usb 2-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
** Model information
not available
** Loaded modules:
Module Size Used by
ppdev 4058 0
lp 5570 0
sco 5857 2
bnep 7444 2
l2cap 21705 3 bnep
bluetooth 36319 5 sco,bnep,l2cap
rfkill 10264 2 bluetooth
acpi_cpufreq 4943 0
cpufreq_stats 1940 0
cpufreq_powersave 602 0
cpufreq_userspace 1480 0
cpufreq_conservative 4018 1
binfmt_misc 4907 1
fuse 43762 1
ext3 94204 2
jbd 32169 1 ext3
it87 11487 0
hwmon_vid 1528 1 it87
coretemp 3401 0
loop 9765 0
snd_hda_codec_realtek 163238 1
snd_hda_intel 16787 0
snd_hda_codec 46002 2 snd_hda_codec_realtek,snd_hda_intel
usblp 7899 0
snd_hwdep 4054 1 snd_hda_codec
snd_pcm_oss 28671 0
snd_mixer_oss 10461 1 snd_pcm_oss
snd_pcm 47214 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 3576 0
snd_rawmidi 12513 1 snd_seq_midi
bttv 88173 0
snd_seq_midi_event 3684 1 snd_seq_midi
v4l2_common 9820 1 bttv
snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event
videodev 25545 2 bttv,v4l2_common
snd_timer 12258 2 snd_pcm,snd_seq
i915 221767 2
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
drm_kms_helper 18305 1 i915
v4l1_compat 10250 1 videodev
parport_pc 15799 1
rng_core 2178 0
ir_common 22187 1 bttv
parport 22554 3 ppdev,lp,parport_pc
drm 112020 3 i915,drm_kms_helper
i2c_algo_bit 3497 2 bttv,i915
video 14605 1 i915
videobuf_dma_sg 7203 1 bttv
output 1204 1 video
videobuf_core 10476 2 bttv,videobuf_dma_sg
btcx_risc 2499 1 bttv
i2c_i801 6462 0
tveeprom 9393 1 bttv
i2c_core 12696 9 bttv,v4l2_common,videodev,i915,drm_kms_helper,drm,i2c_algo_bit,i2c_i801,tveeprom
snd 34363 11 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
button 3598 1 i915
processor 26671 1 acpi_cpufreq
soundcore 3450 1 snd
evdev 5609 10
pcspkr 1207 0
snd_page_alloc 5045 2 snd_hda_intel,snd_pcm
psmouse 44657 0
serio_raw 2916 0
ext4 257739 2
mbcache 3762 2 ext3,ext4
jbd2 56155 1 ext4
crc16 1027 2 l2cap,ext4
usb_storage 30541 0
sg 15968 0
sr_mod 10770 0
cdrom 26487 1 sr_mod
sd_mod 25869 7
crc_t10dif 1012 1 sd_mod
ata_generic 2019 0
uhci_hcd 16057 0
ata_piix 17736 5
libata 115721 2 ata_generic,ata_piix
ehci_hcd 27851 0
floppy 40923 0
atl1c 22893 0
thermal 9206 0
thermal_sys 9378 3 video,processor,thermal
scsi_mod 101401 5 usb_storage,sg,sr_mod,sd_mod,libata
usbcore 98397 5 usblp,usb_storage,uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:24:1d:59:4a:22 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.11/24 brd 192.168.0.255 scope global eth0
inet6 2a01:e35:2f6b:e9e0:224:1dff:fe59:4a22/64 scope global dynamic
valid_lft 86358sec preferred_lft 86358sec
inet6 fe80::224:1dff:fe59:4a22/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 10445 86 0 0 0 0 0 0 10445 86 0 0 0 0 0 0
eth0: 838374 1184 0 0 0 0 0 19 202001 1146 0 0 0 0 1 0
*** Protocol statistics:
Ip:
869 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
867 incoming packets delivered
815 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
84 active connections openings
4 passive connection openings
0 failed connection attempts
7 connection resets received
1 connections established
1038 segments received
1032 segments send out
0 segments retransmited
0 bad segments received.
10 resets sent
Udp:
195 packets received
0 packets to unknown port received.
0 packet receive errors
149 packets sent
UdpLite:
TcpExt:
50 TCP sockets finished time wait in fast timer
42 delayed acks sent
8 packets directly queued to recvmsg prequeue.
9 bytes directly in process context from backlog
3102 bytes directly received in process context from prequeue
557 packet headers predicted
18 packets header predicted and directly queued to user
181 acknowledgments not containing data payload received
18 predicted acknowledgments
7 connections reset due to early user close
IpExt:
InMcastPkts: 23
OutMcastPkts: 18
InBcastPkts: 63
InOctets: 527642
OutOctets: 138811
InMcastOctets: 4892
OutMcastOctets: 3482
InBcastOctets: 10177
*** Device features:
eth0: 0x110989
lo: 0x13865
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 10)
Subsystem: Giga-byte Technology Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2] (rev 10) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device [1458:d000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 26
Region 0: Memory at e0300000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at e000 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at e0000000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Giga-byte Technology Device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e0380000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e0400000-e05fffff
Prefetchable memory behind bridge: 00000000e0600000-00000000e07fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e0100000-e01fffff
Prefetchable memory behind bridge: 00000000e0800000-00000000e09fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at e100 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e200 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e300 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at e400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at e0384000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Prefetchable memory behind bridge: 00000000e0200000-00000000e02fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Giga-byte Technology Device [1458:b001]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f000 [size=16]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Giga-byte Technology Device [1458:b002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at e900 [size=8]
Region 1: I/O ports at ea00 [size=4]
Region 2: I/O ports at eb00 [size=8]
Region 3: I/O ports at ec00 [size=4]
Region 4: I/O ports at ed00 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 01)
Subsystem: Giga-byte Technology GA-8I945PG-RH Mainboard [1458:5001]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
02:00.0 Ethernet controller [0200]: Atheros Communications AR8131 Gigabit Ethernet [1969:1063] (rev c0)
Subsystem: Giga-byte Technology GA-G31M-ES2L Motherboard [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 27
Region 0: Memory at e0100000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at d000 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c
03:01.0 Multimedia video controller [0400]: Brooktree Corporation Bt848 Video Capture [109e:0350] (rev 12)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 19
Region 0: Memory at e0200000 (32-bit, prefetchable) [size=4K]
Kernel driver in use: bttv
** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 03f0:1504 Hewlett-Packard DeskJet 920c
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.35 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.1 tools for generating an initramfs
ii linux-base 2.6.32-21 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
ii firmware-linux-free 2.6.32-21 Binary firmware for various driver
ii libc6-i686 2.11.2-2 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/prerm/would-invalidate-boot-loader-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/bootloader-test-error-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/bootloader-error-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
Reply to: