[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#594845: linux-image-2.6.32-5-amd64: kernel BUG at /build/buildd-linux-2.6_2.6.32-20-amd64-lNUT1p/..../fs/sysfs/file.c:539



Package: linux-2.6
Version: 2.6.32-20
Severity: normal


A 32 bit Sarge image running in an lxc container triggered this kernel
BUG when it attempted to start an openvpn server.

The container configuration is:

	lxc.utsname		= kenny

	lxc.network.type	= veth
	lxc.network.flags	= up
	lxc.network.link	= br0
	lxc.network.name	= eth0

	lxc.network.type	= veth
	lxc.network.flags	= up
	lxc.network.link	= br1
	lxc.network.name	= eth1

	lxc.ttys		= 9
	lxc.rootfs		= /kenny/kenny.root


-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-20) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Thu Aug 12 13:01:50 UTC 2010

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=c95ba7a2-3c1a-4954-ada2-f2bb54e0cbab ro quiet

** Not tainted

** Kernel log:
imklog 4.6.4, log source = /proc/kmsg started.
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-20) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Thu Aug 12 13:01:50 UTC 2010
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=c95ba7a2-3c1a-4954-ada2-f2bb54e0cbab ro quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bdcb0000 (usable)
[    0.000000]  BIOS-e820: 00000000bdcb0000 - 00000000bdce3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bdce3000 - 00000000bdcf0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bdcf0000 - 00000000bdd00000 (reserved)
[    0.000000]  BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[    0.000000] DMI 2.4 present.
[    0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CBFFF write-protect
[    0.000000]   CC000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   2 base 0BE000000 mask FFE000000 uncachable
[    0.000000]   3 base 0BDE00000 mask FFFE00000 uncachable
[    0.000000]   4 base 100000000 mask FC0000000 write-back
[    0.000000]   5 base 0BDD00000 mask FFFF00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000bdd00000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xbdcb0 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000bdcb0000
[    0.000000]  0000000000 - 00bdc00000 page 2M
[    0.000000]  00bdc00000 - 00bdcb0000 page 4k
[    0.000000] kernel direct mapping tables up to bdcb0000 @ 8000-d000
[    0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[    0.000000]  0100000000 - 0140000000 page 2M
[    0.000000] kernel direct mapping tables up to 140000000 @ b000-11000
[    0.000000] RAMDISK: 37670000 - 37fef8ef
[    0.000000] ACPI: RSDP 00000000000f7490 00014 (v00 GBT   )
[    0.000000] ACPI: RSDT 00000000bdce3040 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 00000000bdce30c0 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 00000000bdce3180 047ED (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 00000000bdcb0000 00040
[    0.000000] ACPI: HPET 00000000bdce7ac0 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 00000000bdce7b40 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: APIC 00000000bdce79c0 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: SSDT 00000000bdce8520 003AB (v01  PmRef    CpuPm 00003000 INTL 20040311)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000140000000
[    0.000000] Bootmem setup node 0 0000000000000000-0000000140000000
[    0.000000]   NODE_DATA [000000000000c000 - 0000000000013fff]
[    0.000000]   bootmap [0000000000014000 -  000000000003bfff] pages 28
[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0001000000 - 0001684354]    TEXT DATA BSS ==> [0001000000 - 0001684354]
[    0.000000]   #3 [0037670000 - 0037fef8ef]          RAMDISK ==> [0037670000 - 0037fef8ef]
[    0.000000]   #4 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
[    0.000000]   #5 [0001685000 - 00016850f6]              BRK ==> [0001685000 - 00016850f6]
[    0.000000]   #6 [0000008000 - 000000b000]          PGTABLE ==> [0000008000 - 000000b000]
[    0.000000]   #7 [000000b000 - 000000c000]          PGTABLE ==> [000000b000 - 000000c000]
[    0.000000] found SMP MP-table at [ffff8800000f5660] f5660
[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880001800000-ffff880004ffffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00140000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000bdcb0
[    0.000000]     0: 0x00100000 -> 0x00140000
[    0.000000] On node 0 totalpages: 1039439
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 103 pages reserved
[    0.000000]   DMA zone: 3840 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 759016 pages, LIFO batch:31
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 258560 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bdcb0000 - 00000000bdce3000
[    0.000000] PM: Registered nosave memory: 00000000bdce3000 - 00000000bdcf0000
[    0.000000] PM: Registered nosave memory: 00000000bdcf0000 - 00000000bdd00000
[    0.000000] PM: Registered nosave memory: 00000000bdd00000 - 00000000c0000000
[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000d0000000
[    0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880005200000 s90328 r8192 d24360 u524288
[    0.000000] pcpu-alloc: s90328 r8192 d24360 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1021416
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=c95ba7a2-3c1a-4954-ada2-f2bb54e0cbab ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.000000] Placing 64MB software IO TLB between ffff88000539e000 - ffff88000939e000
[    0.000000] software IO TLB at phys 0x539e000 - 0x939e000
[    0.000000] Memory: 4017136k/5242880k available (3067k kernel code, 1085124k absent, 140620k reserved, 1886k data, 584k init)
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:4352 nr_irqs:440
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2399.993 MHz processor.
[    0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.98 BogoMIPS (lpj=9599972)
[    0.004024] Security Framework initialized
[    0.004029] SELinux:  Disabled at boot.
[    0.004344] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.008509] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.009501] Mount-cache hash table entries: 256
[    0.009645] Initializing cgroup subsys ns
[    0.009649] Initializing cgroup subsys cpuacct
[    0.009653] Initializing cgroup subsys devices
[    0.009656] Initializing cgroup subsys freezer
[    0.009657] Initializing cgroup subsys net_cls
[    0.009679] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.009681] CPU: L2 cache: 4096K
[    0.009685] CPU 0/0x0 -> Node 0
[    0.009687] CPU: Physical Processor ID: 0
[    0.009688] CPU: Processor Core ID: 0
[    0.009691] mce: CPU supports 6 MCE banks
[    0.009699] CPU0: Thermal monitoring enabled (TM2)
[    0.009703] using mwait in idle threads.
[    0.009704] Performance Events: Core2 events, Intel PMU driver.
[    0.009710] ... version:                2
[    0.009711] ... bit width:              40
[    0.009712] ... generic registers:      2
[    0.009714] ... value mask:             000000ffffffffff
[    0.009715] ... max period:             000000007fffffff
[    0.009717] ... fixed-purpose events:   3
[    0.009718] ... event mask:             0000000700000003
[    0.010586] ACPI: Core revision 20090903
[    0.019202] Setting APIC routing to flat
[    0.019510] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.059198] CPU0: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
[    0.060001] Booting processor 1 APIC 0x3 ip 0x6000
[    0.008000] Initializing CPU#1
[    0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.008000] CPU: L2 cache: 4096K
[    0.008000] CPU 1/0x3 -> Node 0
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 3
[    0.008000] CPU1: Thermal monitoring enabled (TM2)
[    0.144075] CPU1: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
[    0.144081] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.148067] Booting processor 2 APIC 0x2 ip 0x6000
[    0.008000] Initializing CPU#2
[    0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.008000] CPU: L2 cache: 4096K
[    0.008000] CPU 2/0x2 -> Node 0
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 2
[    0.008000] CPU2: Thermal monitoring enabled (TM2)
[    0.236107] CPU2: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
[    0.236113] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[    0.240068] Booting processor 3 APIC 0x1 ip 0x6000
[    0.008000] Initializing CPU#3
[    0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.008000] CPU: L2 cache: 4096K
[    0.008000] CPU 3/0x1 -> Node 0
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 1
[    0.008000] CPU3: Thermal monitoring enabled (TM2)
[    0.328091] CPU3: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
[    0.328099] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[    0.332025] Brought up 4 CPUs
[    0.332027] Total of 4 processors activated (19200.56 BogoMIPS).
[    0.333592] CPU0 attaching sched-domain:
[    0.333595]  domain 0: span 0,3 level MC
[    0.333597]   groups: 0 3
[    0.333601]   domain 1: span 0-3 level CPU
[    0.333603]    groups: 0,3 (cpu_power = 2048) 1-2 (cpu_power = 2048)
[    0.333610] CPU1 attaching sched-domain:
[    0.333612]  domain 0: span 1-2 level MC
[    0.333614]   groups: 1 2
[    0.333617]   domain 1: span 0-3 level CPU
[    0.333618]    groups: 1-2 (cpu_power = 2048) 0,3 (cpu_power = 2048)
[    0.333624] CPU2 attaching sched-domain:
[    0.333626]  domain 0: span 1-2 level MC
[    0.333628]   groups: 2 1
[    0.333631]   domain 1: span 0-3 level CPU
[    0.333632]    groups: 1-2 (cpu_power = 2048) 0,3 (cpu_power = 2048)
[    0.333638] CPU3 attaching sched-domain:
[    0.333640]  domain 0: span 0,3 level MC
[    0.333641]   groups: 3 0
[    0.333644]   domain 1: span 0-3 level CPU
[    0.333646]    groups: 0,3 (cpu_power = 2048) 1-2 (cpu_power = 2048)
[    0.333790] devtmpfs: initialized
[    0.336524] regulator: core version 0.5
[    0.336524] NET: Registered protocol family 16
[    0.336524] ACPI: bus type pci registered
[    0.336524] PCI: MCFG configuration 0: base c0000000 segment 0 buses 0 - 255
[    0.336524] PCI: MCFG area at c0000000 reserved in E820
[    0.345766] PCI: Using MMCONFIG at c0000000 - cfffffff
[    0.345768] PCI: Using configuration type 1 for base access
[    0.346097] bio: create slab <bio-0> at 0
[    0.346097] ACPI: EC: Look up EC in DSDT
[    0.352408] ACPI: Interpreter enabled
[    0.352418] ACPI: (supports S0 S3 S4 S5)
[    0.352444] ACPI: Using IOAPIC for interrupt routing
[    0.356814] ACPI: No dock devices found.
[    0.356931] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.357004] pci 0000:00:02.0: reg 10 64bit mmio: [0xe3000000-0xe33fffff]
[    0.357010] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff]
[    0.357014] pci 0000:00:02.0: reg 20 io port: [0xd100-0xd107]
[    0.357045] pci 0000:00:02.1: reg 10 64bit mmio: [0xe3400000-0xe34fffff]
[    0.357121] pci 0000:00:1a.0: reg 20 io port: [0xd200-0xd21f]
[    0.357180] pci 0000:00:1a.1: reg 20 io port: [0xd600-0xd61f]
[    0.357240] pci 0000:00:1a.2: reg 20 io port: [0xd000-0xd01f]
[    0.357291] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe3705000-0xe37053ff]
[    0.357360] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe3700000-0xe3703fff]
[    0.357396] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.357399] pci 0000:00:1b.0: PME# disabled
[    0.357454] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.357457] pci 0000:00:1c.0: PME# disabled
[    0.357514] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.357517] pci 0000:00:1c.4: PME# disabled
[    0.357571] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.357575] pci 0000:00:1c.5: PME# disabled
[    0.357621] pci 0000:00:1d.0: reg 20 io port: [0xd300-0xd31f]
[    0.357681] pci 0000:00:1d.1: reg 20 io port: [0xd400-0xd41f]
[    0.357741] pci 0000:00:1d.2: reg 20 io port: [0xd500-0xd51f]
[    0.357792] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe3704000-0xe37043ff]
[    0.357935] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[    0.357939] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[    0.357942] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[    0.357945] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[    0.357949] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 000b)
[    0.357994] pci 0000:00:1f.2: reg 10 io port: [0xd700-0xd707]
[    0.357999] pci 0000:00:1f.2: reg 14 io port: [0xd800-0xd803]
[    0.358004] pci 0000:00:1f.2: reg 18 io port: [0xd900-0xd907]
[    0.358009] pci 0000:00:1f.2: reg 1c io port: [0xda00-0xda03]
[    0.358014] pci 0000:00:1f.2: reg 20 io port: [0xdb00-0xdb0f]
[    0.358019] pci 0000:00:1f.2: reg 24 io port: [0xdc00-0xdc0f]
[    0.358059] pci 0000:00:1f.3: reg 10 64bit mmio: [0xe3706000-0xe37060ff]
[    0.358070] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[    0.358107] pci 0000:00:1f.5: reg 10 io port: [0xde00-0xde07]
[    0.358113] pci 0000:00:1f.5: reg 14 io port: [0xdf00-0xdf03]
[    0.358118] pci 0000:00:1f.5: reg 18 io port: [0xe000-0xe007]
[    0.358123] pci 0000:00:1f.5: reg 1c io port: [0xe100-0xe103]
[    0.358128] pci 0000:00:1f.5: reg 20 io port: [0xe200-0xe20f]
[    0.358133] pci 0000:00:1f.5: reg 24 io port: [0xe300-0xe30f]
[    0.358254] pci 0000:02:00.0: reg 10 32bit mmio: [0xe1020000-0xe103ffff]
[    0.358264] pci 0000:02:00.0: reg 14 32bit mmio: [0xe1000000-0xe101ffff]
[    0.358275] pci 0000:02:00.0: reg 18 io port: [0xa000-0xa01f]
[    0.358310] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[    0.358357] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.358363] pci 0000:02:00.0: PME# disabled
[    0.358405] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.358474] pci 0000:00:1c.4: bridge io port: [0xa000-0xafff]
[    0.358478] pci 0000:00:1c.4: bridge 32bit mmio: [0xe0000000-0xe1ffffff]
[    0.358523] pci 0000:03:00.0: reg 10 io port: [0xb000-0xb0ff]
[    0.358541] pci 0000:03:00.0: reg 18 64bit mmio pref: [0xe3510000-0xe3510fff]
[    0.358554] pci 0000:03:00.0: reg 20 64bit mmio pref: [0xe3500000-0xe350ffff]
[    0.358562] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[    0.358598] pci 0000:03:00.0: supports D1 D2
[    0.358599] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.358604] pci 0000:03:00.0: PME# disabled
[    0.364084] pci 0000:00:1c.5: bridge io port: [0xb000-0xbfff]
[    0.364089] pci 0000:00:1c.5: bridge 32bit mmio: [0xe2000000-0xe2ffffff]
[    0.364096] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xe3500000-0xe35fffff]
[    0.364154] pci 0000:04:00.0: reg 20 io port: [0xc000-0xc01f]
[    0.364178] pci 0000:04:00.0: supports D1 D2
[    0.364180] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.364184] pci 0000:04:00.0: PME# disabled
[    0.364229] pci 0000:04:00.1: reg 20 io port: [0xc100-0xc11f]
[    0.364253] pci 0000:04:00.1: supports D1 D2
[    0.364255] pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.364259] pci 0000:04:00.1: PME# disabled
[    0.364289] pci 0000:04:00.2: reg 10 32bit mmio: [0xe3606000-0xe36060ff]
[    0.364330] pci 0000:04:00.2: supports D1 D2
[    0.364331] pci 0000:04:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.364335] pci 0000:04:00.2: PME# disabled
[    0.364374] pci 0000:04:01.0: reg 10 32bit mmio: [0xe3604000-0xe36047ff]
[    0.364416] pci 0000:04:01.0: supports D1 D2
[    0.364451] pci 0000:04:05.0: reg 10 io port: [0xc200-0xc207]
[    0.364457] pci 0000:04:05.0: reg 14 io port: [0xc300-0xc303]
[    0.364463] pci 0000:04:05.0: reg 18 io port: [0xc400-0xc407]
[    0.364469] pci 0000:04:05.0: reg 1c io port: [0xc500-0xc503]
[    0.364475] pci 0000:04:05.0: reg 20 io port: [0xc600-0xc60f]
[    0.364533] pci 0000:04:07.0: reg 10 32bit mmio: [0xe3605000-0xe36057ff]
[    0.364540] pci 0000:04:07.0: reg 14 32bit mmio: [0xe3600000-0xe3603fff]
[    0.364578] pci 0000:04:07.0: supports D1 D2
[    0.364580] pci 0000:04:07.0: PME# supported from D0 D1 D2 D3hot
[    0.364584] pci 0000:04:07.0: PME# disabled
[    0.364620] pci 0000:00:1e.0: transparent bridge
[    0.364624] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
[    0.364627] pci 0000:00:1e.0: bridge 32bit mmio: [0xe3600000-0xe36fffff]
[    0.364648] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.364810] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.364865] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[    0.364914] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[    0.364960] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.381833] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
[    0.381919] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.382002] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.382085] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[    0.382168] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
[    0.382251] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.382334] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.382417] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.382501] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.382515] vgaarb: loaded
[    0.382559] PCI: Using ACPI for IRQ routing
[    0.382559] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.382559] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.392030] Switching to clocksource tsc
[    0.393140] pnp: PnP ACPI init
[    0.393146] ACPI: bus type pnp registered
[    0.395468] pnp: PnP ACPI: found 13 devices
[    0.395470] ACPI: ACPI bus type pnp unregistered
[    0.395477] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[    0.395480] system 00:01: ioport range 0x290-0x29f has been reserved
[    0.395482] system 00:01: ioport range 0x800-0x805 has been reserved
[    0.395485] system 00:01: ioport range 0x290-0x294 has been reserved
[    0.395487] system 00:01: ioport range 0x880-0x88f has been reserved
[    0.395494] system 00:09: ioport range 0x400-0x4bf could not be reserved
[    0.395498] system 00:0a: iomem range 0xc0000000-0xcfffffff has been reserved
[    0.395503] system 00:0b: iomem range 0xd1000-0xd3fff has been reserved
[    0.395506] system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
[    0.395508] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
[    0.395511] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
[    0.395513] system 00:0b: iomem range 0xbdcb0000-0xbdcfffff could not be reserved
[    0.395516] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[    0.395519] system 00:0b: iomem range 0x100000-0xbdcaffff could not be reserved
[    0.395521] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.395524] system 00:0b: iomem range 0xfed10000-0xfed1dfff has been reserved
[    0.395527] system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.395529] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.395532] system 00:0b: iomem range 0xffb00000-0xffb7ffff has been reserved
[    0.395535] system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved
[    0.395537] system 00:0b: iomem range 0xe0000-0xeffff has been reserved
[    0.400305] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[    0.400308] pci 0000:00:1c.0:   IO window: 0x1000-0x1fff
[    0.400313] pci 0000:00:1c.0:   MEM window: 0xe3800000-0xe39fffff
[    0.400317] pci 0000:00:1c.0:   PREFETCH window: 0x000000e3a00000-0x000000e3bfffff
[    0.400322] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02
[    0.400325] pci 0000:00:1c.4:   IO window: 0xa000-0xafff
[    0.400329] pci 0000:00:1c.4:   MEM window: 0xe0000000-0xe1ffffff
[    0.400333] pci 0000:00:1c.4:   PREFETCH window: 0xe3c00000-0xe3dfffff
[    0.400338] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:03
[    0.400341] pci 0000:00:1c.5:   IO window: 0xb000-0xbfff
[    0.400345] pci 0000:00:1c.5:   MEM window: 0xe2000000-0xe2ffffff
[    0.400349] pci 0000:00:1c.5:   PREFETCH window: 0x000000e3500000-0x000000e35fffff
[    0.400354] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[    0.400357] pci 0000:00:1e.0:   IO window: 0xc000-0xcfff
[    0.400361] pci 0000:00:1e.0:   MEM window: 0xe3600000-0xe36fffff
[    0.400364] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.400375]   alloc irq_desc for 16 on node -1
[    0.400377]   alloc kstat_irqs on node -1
[    0.400382] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.400386] pci 0000:00:1c.0: setting latency timer to 64
[    0.400393] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.400396] pci 0000:00:1c.4: setting latency timer to 64
[    0.400403]   alloc irq_desc for 17 on node -1
[    0.400404]   alloc kstat_irqs on node -1
[    0.400407] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.400410] pci 0000:00:1c.5: setting latency timer to 64
[    0.400416] pci 0000:00:1e.0: setting latency timer to 64
[    0.400419] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.400421] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.400423] pci_bus 0000:01: resource 0 io:  [0x1000-0x1fff]
[    0.400426] pci_bus 0000:01: resource 1 mem: [0xe3800000-0xe39fffff]
[    0.400428] pci_bus 0000:01: resource 2 pref mem [0xe3a00000-0xe3bfffff]
[    0.400430] pci_bus 0000:02: resource 0 io:  [0xa000-0xafff]
[    0.400432] pci_bus 0000:02: resource 1 mem: [0xe0000000-0xe1ffffff]
[    0.400434] pci_bus 0000:02: resource 2 pref mem [0xe3c00000-0xe3dfffff]
[    0.400436] pci_bus 0000:03: resource 0 io:  [0xb000-0xbfff]
[    0.400438] pci_bus 0000:03: resource 1 mem: [0xe2000000-0xe2ffffff]
[    0.400440] pci_bus 0000:03: resource 2 pref mem [0xe3500000-0xe35fffff]
[    0.400442] pci_bus 0000:04: resource 0 io:  [0xc000-0xcfff]
[    0.400444] pci_bus 0000:04: resource 1 mem: [0xe3600000-0xe36fffff]
[    0.400446] pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
[    0.400448] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.400476] NET: Registered protocol family 2
[    0.400612] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.401579] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.404980] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.405478] TCP: Hash tables configured (established 524288 bind 65536)
[    0.405480] TCP reno registered
[    0.405598] NET: Registered protocol family 1
[    0.405617] pci 0000:00:02.0: Boot video device
[    0.405861] Unpacking initramfs...
[    0.603097] Freeing initrd memory: 9726k freed
[    0.606973] audit: initializing netlink socket (disabled)
[    0.606986] type=2000 audit(1283135552.603:1): initialized
[    0.609937] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.611185] VFS: Disk quotas dquot_6.5.2
[    0.611234] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.611307] msgmni has been set to 7864
[    0.611594] alg: No test for stdrng (krng)
[    0.611648] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.611651] io scheduler noop registered
[    0.611652] io scheduler anticipatory registered
[    0.611654] io scheduler deadline registered
[    0.611681] io scheduler cfq registered (default)
[    0.611796]   alloc irq_desc for 24 on node -1
[    0.611798]   alloc kstat_irqs on node -1
[    0.611809] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.611816] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.611940]   alloc irq_desc for 25 on node -1
[    0.611941]   alloc kstat_irqs on node -1
[    0.611948] pcieport 0000:00:1c.4: irq 25 for MSI/MSI-X
[    0.611954] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.612049]   alloc irq_desc for 26 on node -1
[    0.612051]   alloc kstat_irqs on node -1
[    0.612057] pcieport 0000:00:1c.5: irq 26 for MSI/MSI-X
[    0.612064] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.613319] Linux agpgart interface v0.103
[    0.613331] agpgart-intel 0000:00:00.0: Intel G45/G43 Chipset
[    0.614377] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[    0.630733] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    0.630785] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.630880] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.631149] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.631286] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    0.631344] PNP: No PS/2 controller found. Probing ports directly.
[    0.631708] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.631716] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.631866] mice: PS/2 mouse device common for all mice
[    0.631921] rtc_cmos 00:04: RTC can wake from S4
[    0.631961] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.631983] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.631993] cpuidle: using governor ladder
[    0.631994] cpuidle: using governor menu
[    0.631998] No iBFT detected.
[    0.632269] TCP cubic registered
[    0.632360] NET: Registered protocol family 10
[    0.632722] lo: Disabled Privacy Extensions
[    0.632950] Mobile IPv6
[    0.632952] NET: Registered protocol family 17
[    0.633019] PM: Resume from disk failed.
[    0.633029] registered taskstats version 1
[    0.633470] rtc_cmos 00:04: setting system clock to 2010-08-30 02:32:33 UTC (1283135553)
[    0.633502] Initalizing network drop monitor service
[    0.633524] Freeing unused kernel memory: 584k freed
[    0.633644] Write protecting the kernel read-only data: 4220k
[    0.694966] udev: starting version 160
[    0.738258] usbcore: registered new interface driver usbfs
[    0.738281] usbcore: registered new interface driver hub
[    0.742807] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[    0.742810] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[    0.742875] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.742908] e1000e 0000:02:00.0: setting latency timer to 64
[    0.743076]   alloc irq_desc for 27 on node -1
[    0.743078]   alloc kstat_irqs on node -1
[    0.743096] e1000e 0000:02:00.0: irq 27 for MSI/MSI-X
[    0.744812] SCSI subsystem initialized
[    0.749514] usbcore: registered new device driver usb
[    0.755565] libata version 3.00 loaded.
[    0.762444] Uniform Multi-Platform E-IDE driver
[    0.766241]   alloc irq_desc for 23 on node -1
[    0.766243]   alloc kstat_irqs on node -1
[    0.766250] firewire_ohci 0000:04:07.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.768222] ata_piix 0000:00:1f.2: version 2.13
[    0.768242]   alloc irq_desc for 19 on node -1
[    0.768245]   alloc kstat_irqs on node -1
[    0.768253] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.768257] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.768302] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.768374] scsi0 : ata_piix
[    0.768460] scsi1 : ata_piix
[    0.769195] ata1: SATA max UDMA/133 cmd 0xd700 ctl 0xd800 bmdma 0xdb00 irq 19
[    0.769200] ata2: SATA max UDMA/133 cmd 0xd900 ctl 0xda00 bmdma 0xdb08 irq 19
[    0.769219] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.769223] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.769262] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.769317] scsi2 : ata_piix
[    0.769367] scsi3 : ata_piix
[    0.769662] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.769867] ata3: SATA max UDMA/133 cmd 0xde00 ctl 0xdf00 bmdma 0xe200 irq 19
[    0.769871] ata4: SATA max UDMA/133 cmd 0xe000 ctl 0xe100 bmdma 0xe208 irq 19
[    0.769905]   alloc irq_desc for 18 on node -1
[    0.769908]   alloc kstat_irqs on node -1
[    0.769913] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.769932] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.769935] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.770015] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.771314] uhci_hcd: USB Universal Host Controller Interface driver
[    0.773917] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.773931] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe3705000
[    0.774077] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.774097] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.774144] r8169 0000:03:00.0: setting latency timer to 64
[    0.774194]   alloc irq_desc for 28 on node -1
[    0.774196]   alloc kstat_irqs on node -1
[    0.774210] r8169 0000:03:00.0: irq 28 for MSI/MSI-X
[    0.774683] eth0: RTL8168c/8111c at 0xffffc90000678000, 00:1f:d0:26:75:a4, XID 1c4000c0 IRQ 28
[    0.788371] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.788402] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.788405] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.788407] usb usb1: Product: EHCI Host Controller
[    0.788409] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[    0.788410] usb usb1: SerialNumber: 0000:00:1a.7
[    0.788484] usb usb1: configuration #1 chosen from 1 choice
[    0.788517] hub 1-0:1.0: USB hub found
[    0.788531] hub 1-0:1.0: 6 ports detected
[    0.788602] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.788617] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.788623] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.788631] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[    0.788702] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d200
[    0.788746] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.788748] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.788750] usb usb2: Product: UHCI Host Controller
[    0.788752] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    0.788754] usb usb2: SerialNumber: 0000:00:1a.0
[    0.788800] usb usb2: configuration #1 chosen from 1 choice
[    0.788827] hub 2-0:1.0: USB hub found
[    0.788832] hub 2-0:1.0: 2 ports detected
[    0.788924] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.788936] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.788940] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.788952] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
[    0.792871] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.792881] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe3704000
[    0.808399] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.808425] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.808427] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.808429] usb usb3: Product: EHCI Host Controller
[    0.808430] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[    0.808432] usb usb3: SerialNumber: 0000:00:1d.7
[    0.808489] usb usb3: configuration #1 chosen from 1 choice
[    0.808512] hub 3-0:1.0: USB hub found
[    0.808517] hub 3-0:1.0: 6 ports detected
[    0.808567]   alloc irq_desc for 21 on node -1
[    0.808569]   alloc kstat_irqs on node -1
[    0.808573] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.808579] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.808581] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.808587] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.808613] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d600
[    0.808641] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.808643] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.808645] usb usb4: Product: UHCI Host Controller
[    0.808647] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    0.808649] usb usb4: SerialNumber: 0000:00:1a.1
[    0.808702] usb usb4: configuration #1 chosen from 1 choice
[    0.808724] hub 4-0:1.0: USB hub found
[    0.808729] hub 4-0:1.0: 2 ports detected
[    0.808789] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.808796] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.808799] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.808810] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.808839] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000d000
[    0.808878] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.808880] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.808882] usb usb5: Product: UHCI Host Controller
[    0.808884] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    0.808886] usb usb5: SerialNumber: 0000:00:1a.2
[    0.808960] usb usb5: configuration #1 chosen from 1 choice
[    0.808989] hub 5-0:1.0: USB hub found
[    0.808994] hub 5-0:1.0: 2 ports detected
[    0.809043] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.809049] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.809051] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.809057] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.809078] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d300
[    0.809104] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.809106] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.809108] usb usb6: Product: UHCI Host Controller
[    0.809110] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    0.809111] usb usb6: SerialNumber: 0000:00:1d.0
[    0.809159] usb usb6: configuration #1 chosen from 1 choice
[    0.809182] hub 6-0:1.0: USB hub found
[    0.809186] hub 6-0:1.0: 2 ports detected
[    0.809229] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.809234] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.809237] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.809242] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.809263] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d400
[    0.809289] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.809291] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.809293] usb usb7: Product: UHCI Host Controller
[    0.809295] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    0.809297] usb usb7: SerialNumber: 0000:00:1d.1
[    0.809345] usb usb7: configuration #1 chosen from 1 choice
[    0.809370] hub 7-0:1.0: USB hub found
[    0.809374] hub 7-0:1.0: 2 ports detected
[    0.809417] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.809422] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.809425] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.809431] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.809451] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d500
[    0.809479] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.809481] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.809483] usb usb8: Product: UHCI Host Controller
[    0.809484] usb usb8: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    0.809486] usb usb8: SerialNumber: 0000:00:1d.2
[    0.809538] usb usb8: configuration #1 chosen from 1 choice
[    0.809560] hub 8-0:1.0: USB hub found
[    0.809565] hub 8-0:1.0: 2 ports detected
[    0.836401] firewire_ohci: Added fw-ohci device 0000:04:07.0, OHCI version 1.10
[    0.836431] it8213 0000:04:05.0: IDE controller (0x1283:0x8213 rev 0x00)
[    0.836442] ITE8213_IDE 0000:04:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    0.836456] it8213 0000:04:05.0: 100% native mode on irq 21
[    0.836462]     ide0: BM-DMA at 0xc600-0xc607
[    0.836468] Probing IDE interface ide0...
[    0.919640] 0000:02:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:1b:21:29:7b:f4
[    0.919642] 0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection
[    0.919725] 0000:02:00.0: eth1: MAC: 1, PHY: 4, PBA No: d50854-003
[    1.098622] ata3: SATA link down (SStatus 0 SControl 300)
[    1.109196] ata4: SATA link down (SStatus 0 SControl 300)
[    1.316520] usb 6-2: new low speed USB device using uhci_hcd and address 2
[    1.336516] firewire_core: created device fw0: GUID 002d73e300001fd0, S400
[    1.408560] ide0 at 0xc200-0xc207,0xc302 on irq 21
[    1.408606] ehci_hcd 0000:04:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.408626] ehci_hcd 0000:04:00.2: EHCI Host Controller
[    1.408639] ehci_hcd 0000:04:00.2: new USB bus registered, assigned bus number 9
[    1.408688] ehci_hcd 0000:04:00.2: irq 18, io mem 0xe3606000
[    1.444022] ehci_hcd 0000:04:00.2: USB 2.0 started, EHCI 1.00
[    1.444049] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[    1.444051] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.444053] usb usb9: Product: EHCI Host Controller
[    1.444055] usb usb9: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[    1.444057] usb usb9: SerialNumber: 0000:04:00.2
[    1.444111] usb usb9: configuration #1 chosen from 1 choice
[    1.444136] hub 9-0:1.0: USB hub found
[    1.444141] hub 9-0:1.0: 4 ports detected
[    1.444203]   alloc irq_desc for 20 on node -1
[    1.444205]   alloc kstat_irqs on node -1
[    1.444210] uhci_hcd 0000:04:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.444216] uhci_hcd 0000:04:00.0: UHCI Host Controller
[    1.444226] uhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 10
[    1.444255] uhci_hcd 0000:04:00.0: irq 20, io base 0x0000c000
[    1.444293] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[    1.444295] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.444297] usb usb10: Product: UHCI Host Controller
[    1.444299] usb usb10: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    1.444301] usb usb10: SerialNumber: 0000:04:00.0
[    1.444364] usb usb10: configuration #1 chosen from 1 choice
[    1.444391] hub 10-0:1.0: USB hub found
[    1.444397] hub 10-0:1.0: 2 ports detected
[    1.444441] uhci_hcd 0000:04:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.444446] uhci_hcd 0000:04:00.1: UHCI Host Controller
[    1.444452] uhci_hcd 0000:04:00.1: new USB bus registered, assigned bus number 11
[    1.444473] uhci_hcd 0000:04:00.1: irq 19, io base 0x0000c100
[    1.444499] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
[    1.444501] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.444503] usb usb11: Product: UHCI Host Controller
[    1.444504] usb usb11: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    1.444506] usb usb11: SerialNumber: 0000:04:00.1
[    1.444554] usb usb11: configuration #1 chosen from 1 choice
[    1.444578] hub 11-0:1.0: USB hub found
[    1.444583] hub 11-0:1.0: 2 ports detected
[    1.497134] usb 6-2: New USB device found, idVendor=046d, idProduct=c505
[    1.497138] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.497141] usb 6-2: Product: USB Receiver
[    1.497143] usb 6-2: Manufacturer: Logitech
[    1.497231] usb 6-2: configuration #1 chosen from 1 choice
[    1.576583] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.576598] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.608229] ata2.00: ATAPI: HL-DT-ST BDDVDRW GGC-H20L, 1.02, max UDMA/133
[    1.608401] ata2.01: ATA-8: WDC WD15EARS-00Z5B1, 80.00A80, max UDMA/133
[    1.608405] ata2.01: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.640264] ata2.00: configured for UDMA/133
[    1.657041] ata2.01: configured for UDMA/133
[    1.692069] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.692083] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.708303] ata1.00: HPA detected: current 1953523055, native 1953525168
[    1.708308] ata1.00: ATA-7: SAMSUNG HD103UJ, 1AA01112, max UDMA7
[    1.708311] ata1.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.708481] ata1.01: HPA detected: current 1953523055, native 1953525168
[    1.708488] ata1.01: ATA-7: SAMSUNG HD103UJ, 1AA01112, max UDMA7
[    1.708492] ata1.01: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.716332] ata1.00: configured for UDMA/133
[    1.724330] ata1.01: configured for UDMA/133
[    1.724444] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD103UJ  1AA0 PQ: 0 ANSI: 5
[    1.724625] scsi 0:0:1:0: Direct-Access     ATA      SAMSUNG HD103UJ  1AA0 PQ: 0 ANSI: 5
[    1.756525] usb 9-1: new high speed USB device using ehci_hcd and address 2
[    1.776258] scsi 1:0:0:0: CD-ROM            HL-DT-ST BDDVDRW GGC-H20L 1.02 PQ: 0 ANSI: 5
[    1.776456] scsi 1:0:1:0: Direct-Access     ATA      WDC WD15EARS-00Z 80.0 PQ: 0 ANSI: 5
[    1.782032] sd 0:0:0:0: [sda] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.782074] sd 0:0:1:0: [sdb] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.782097] sd 0:0:0:0: [sda] Write Protect is off
[    1.782099] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.782136] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.782154] sd 0:0:1:0: [sdb] Write Protect is off
[    1.782166] sd 1:0:1:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[    1.782174] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.782198] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.782225] sd 1:0:1:0: [sdc] Write Protect is off
[    1.782228] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[    1.782249] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.782316]  sda:
[    1.782472]  sdc:
[    1.789172] usbcore: registered new interface driver hiddev
[    1.789215]  sdc1 sdc2
[    1.789705] sd 1:0:1:0: [sdc] Attached SCSI disk
[    1.791412]  sda1 sda2
[    1.791731]  sdb: sdb1 sdb2
[    1.803395] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input1
[    1.803420] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.803451] generic-usb 0003:046D:C505.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0
[    1.803720] sd 0:0:1:0: [sdb] Attached SCSI disk
[    1.836585] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input2
[    1.836663] generic-usb 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1
[    1.836688] usbcore: registered new interface driver usbhid
[    1.836690] usbhid: v2.6:USB HID core driver
[    1.894333] usb 9-1: New USB device found, idVendor=0fe9, idProduct=db98
[    1.894338] usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[    1.894341] usb 9-1: Product: Bluebird
[    1.894343] usb 9-1: Manufacturer: Dvico
[    1.894346] usb 9-1: SerialNumber: 000080d8
[    1.894478] usb 9-1: configuration #1 chosen from 1 choice
[    2.012037] usb 9-2: new high speed USB device using ehci_hcd and address 3
[    2.134323] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.134328] Uniform CD-ROM driver Revision: 3.20
[    2.134445] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.137416] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.137448] sd 0:0:1:0: Attached scsi generic sg1 type 0
[    2.137479] sr 1:0:0:0: Attached scsi generic sg2 type 5
[    2.137529] sd 1:0:1:0: Attached scsi generic sg3 type 0
[    2.146349] usb 9-2: New USB device found, idVendor=0fe9, idProduct=db98
[    2.146353] usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[    2.146356] usb 9-2: Product: Bluebird
[    2.146359] usb 9-2: Manufacturer: Dvico
[    2.146361] usb 9-2: SerialNumber: 000000d8
[    2.146445] usb 9-2: configuration #1 chosen from 1 choice
[    2.982838] md: raid1 personality registered for level 1
[    2.990952] md: md0 stopped.
[    2.991628] md: bind<sdb2>
[    2.992237] md: bind<sda2>
[    2.993309] raid1: raid set md0 active with 2 out of 2 mirrors
[    2.993342] md0: detected capacity change from 0 to 995908714496
[    2.994737]  md0: unknown partition table
[   13.082264] PM: Starting manual resume from disk
[   13.082267] PM: Resume from partition 8:1
[   13.082269] PM: Checking hibernation image.
[   13.083998] PM: Error -22 checking image file
[   13.084000] PM: Resume from disk failed.
[   13.205014] EXT4-fs (md0): mounted filesystem with ordered data mode
[   14.616779] udev: starting version 160
[   14.893764] ACPI: SSDT 00000000bdce7c40 0022A (v01  PmRef  Cpu0Ist 00003000 INTL 20040311)
[   14.893937] Marking TSC unstable due to TSC halts in idle
[   14.894003] Switching to clocksource hpet
[   14.894048] processor LNXCPU:00: registered as cooling_device0
[   14.894390] ACPI: SSDT 00000000bdce8100 00152 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
[   14.894606] processor LNXCPU:01: registered as cooling_device1
[   14.894868] ACPI: SSDT 00000000bdce8260 00152 (v01  PmRef  Cpu2Ist 00003000 INTL 20040311)
[   14.895100] processor LNXCPU:02: registered as cooling_device2
[   14.895322] ACPI: SSDT 00000000bdce83c0 00152 (v01  PmRef  Cpu3Ist 00003000 INTL 20040311)
[   14.895518] processor LNXCPU:03: registered as cooling_device3
[   14.897239] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[   14.897247] ACPI: Power Button [PWRB]
[   14.897326] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[   14.897329] ACPI: Power Button [PWRF]
[   15.424075] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   15.565257] parport_pc 00:08: reported by Plug and Play ACPI
[   15.565307] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   15.934658] [drm] Initialized drm 1.1.0 20060810
[   16.023149] Linux video capture interface: v2.00
[   16.062836] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   16.062841] i915 0000:00:02.0: setting latency timer to 64
[   16.075586] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[   16.075589] [drm] MTRR allocation failed.  Graphics performance may suffer.
[   16.075684]   alloc irq_desc for 29 on node -1
[   16.075687]   alloc kstat_irqs on node -1
[   16.075704] i915 0000:00:02.0: irq 29 for MSI/MSI-X
[   16.075712] [drm] set up 31M of stolen space
[   16.171026] saa7130/34: v4l2 driver version 0.2.15 loaded
[   16.171077] saa7134 0000:04:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   16.171083] saa7133[0]: found at 0000:04:01.0, rev: 209, irq: 19, latency: 32, mmio: 0xe3604000
[   16.171089] saa7133[0]: subsystem: 1462:8625, board: MSI TV@nywhere A/D v1.1 [card=135,autodetected]
[   16.171120] saa7133[0]: board init: gpio is 100
[   16.171128] IRQ 19/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[   16.204371] dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2)' in warm state.
[   16.204551] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   16.235640] DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2))
[   16.284344] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   16.328022] saa7133[0]: i2c eeprom 00: 62 14 25 86 ff ff ff ff ff ff ff ff ff ff ff ff
[   16.328031] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.328038] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.328045] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.328052] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.328058] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.328065] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.328072] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.328079] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.328086] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.328093] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.328100] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.328107] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.328114] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.328121] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.328128] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.328136] i2c i2c-8: Invalid 7-bit address 0x7a
[   16.400278] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[   16.432073] tuner 8-004b: chip found @ 0x96 (saa7133[0])
[   16.509512] tda829x 8-004b: setting tuner address to 61
[   16.573606] tda829x 8-004b: type set to tda8290+75a
[   16.578511] Error: Driver 'pcspkr' is already registered, aborting...
[   16.599179] DiB0070: successfully identified
[   16.599743] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1e.0/0000:04:00.2/usb9/9-1/input/input6
[   16.599780] dvb-usb: schedule remote query interval to 100 msecs.
[   16.599783] dvb-usb: DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2) successfully initialized and connected.
[   16.599798] dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2)' in warm state.
[   16.599961] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   16.631078] DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2))
[   16.792832] DVB: registering adapter 1 frontend 0 (DiBcom 7000PC)...
[   16.885316] Console: switching to colour frame buffer device 240x67
[   16.890219] fb0: inteldrmfb frame buffer device
[   16.890221] registered panic notifier
[   16.890250] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   16.890300]   alloc irq_desc for 22 on node -1
[   16.890303]   alloc kstat_irqs on node -1
[   16.890311] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   16.890352] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   16.994857] DiB0070: successfully identified
[   16.995447] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1e.0/0000:04:00.2/usb9/9-2/input/input7
[   16.995493] dvb-usb: schedule remote query interval to 100 msecs.
[   16.995498] dvb-usb: DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2) successfully initialized and connected.
[   16.995522] usbcore: registered new interface driver dvb_usb_cxusb
[   17.005591] hda_codec: ALC889A: BIOS auto-probing.
[   17.006978] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[   20.504099] saa7133[0]: registered device video0 [v4l2]
[   20.504133] saa7133[0]: registered device vbi0
[   20.504164] saa7133[0]: registered device radio0
[   20.544240] dvb_init() allocating 1 frontend
[   20.700083] DVB: registering new adapter (saa7133[0])
[   20.700088] DVB: registering adapter 2 frontend 0 (Philips TDA10046H DVB-T)...
[   20.876021] tda1004x: setting up plls for 48MHz sampling clock
[   21.072559] tda1004x: found firmware revision ea -- invalid
[   21.072561] tda1004x: trying to boot from eeprom
[   21.377016] tda1004x: found firmware revision ea -- invalid
[   21.377018] tda1004x: waiting for firmware upload...
[   21.377022] saa7134 0000:04:01.0: firmware: requesting dvb-fe-tda10046.fw
[   21.424185] saa7134 0000:04:01.0: firmware: requesting dvb-fe-tda10045.fw
[   21.425951] tda1004x: no firmware upload (timeout or file not found?)
[   21.425990] tda1004x: firmware upload failed
[   21.426830] saa7133[0]/dvb: could not access tda8290 I2C gate
[   21.427175] saa7133[0]/dvb: could not access tda8290 I2C gate
[   21.427177] tda827x_probe_version: could not read from tuner at addr: 0xc2
[   21.439044] saa7134 ALSA driver for DMA sound loaded
[   21.439055] IRQ 19/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[   21.439081] saa7133[0]/alsa: saa7133[0] at 0xe3604000 irq 19 registered as card -1
[   22.251322] Adding 4194296k swap on /dev/sdc1.  Priority:-1 extents:1 across:4194296k 
[   22.616024] device-mapper: uevent: version 1.0.3
[   22.616187] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[   22.862391] loop: module loaded
[   24.759013] Bridge firewalling registered
[   24.760780] device eth1 entered promiscuous mode
[   24.904767] e1000e 0000:02:00.0: irq 27 for MSI/MSI-X
[   24.960611] e1000e 0000:02:00.0: irq 27 for MSI/MSI-X
[   24.961559] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   25.971592] fuse init (API version 7.13)
[   27.618519] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[   27.619140] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   27.619347] br0: port 1(eth1) entering learning state
[   30.186703] lp0: using parport0 (interrupt-driven).
[   30.199604] ppdev: user-space parallel port driver
[   31.227960] Bluetooth: Core ver 2.15
[   31.228053] NET: Registered protocol family 31
[   31.228055] Bluetooth: HCI device and connection manager initialized
[   31.228058] Bluetooth: HCI socket layer initialized
[   31.237762] Bluetooth: L2CAP ver 2.14
[   31.237764] Bluetooth: L2CAP socket layer initialized
[   31.253646] Bluetooth: RFCOMM TTY layer initialized
[   31.253653] Bluetooth: RFCOMM socket layer initialized
[   31.253654] Bluetooth: RFCOMM ver 1.11
[   31.449958] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   31.449961] Bluetooth: BNEP filters: protocol multicast
[   31.499515] Bluetooth: SCO (Voice Link) ver 0.6
[   31.499517] Bluetooth: SCO socket layer initialized
[   35.536035] br0: no IPv6 routers present
[   37.880078] eth1: no IPv6 routers present
[   42.616058] br0: port 1(eth1) entering forwarding state
[   56.169819] r8169: eth0: link down
[   56.170365] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  213.717459] device vethLObd7s entered promiscuous mode
[  213.718076] ADDRCONF(NETDEV_UP): vethLObd7s: link is not ready
[  213.719074] lo: Disabled Privacy Extensions
[  213.762992] ADDRCONF(NETDEV_CHANGE): vethLObd7s: link becomes ready
[  213.763016] br0: port 2(vethLObd7s) entering learning state
[  214.053604] br0: port 2(vethLObd7s) entering disabled state
[  214.085095] br0: port 2(vethLObd7s) entering disabled state
[  491.571340] device vethw48R16 entered promiscuous mode
[  491.571958] ADDRCONF(NETDEV_UP): vethw48R16: link is not ready
[  491.572896] lo: Disabled Privacy Extensions
[  491.627980] ADDRCONF(NETDEV_CHANGE): vethw48R16: link becomes ready
[  491.628034] br0: port 2(vethw48R16) entering learning state
[  491.765095] br0: port 2(vethw48R16) entering disabled state
[  491.796606] br0: port 2(vethw48R16) entering disabled state
[  525.522989] device vethdV7XZr entered promiscuous mode
[  525.523605] ADDRCONF(NETDEV_UP): vethdV7XZr: link is not ready
[  525.524551] lo: Disabled Privacy Extensions
[  525.587467] ADDRCONF(NETDEV_CHANGE): vethdV7XZr: link becomes ready
[  525.587492] br0: port 2(vethdV7XZr) entering learning state
[  525.753600] br0: port 2(vethdV7XZr) entering disabled state
[  525.785089] br0: port 2(vethdV7XZr) entering disabled state
[  586.919286] device vethkvWCJn entered promiscuous mode
[  586.919929] ADDRCONF(NETDEV_UP): vethkvWCJn: link is not ready
[  586.920864] lo: Disabled Privacy Extensions
[  586.971456] ADDRCONF(NETDEV_CHANGE): vethkvWCJn: link becomes ready
[  586.971485] br0: port 2(vethkvWCJn) entering learning state
[  587.117577] br0: port 2(vethkvWCJn) entering disabled state
[  587.165087] br0: port 2(vethkvWCJn) entering disabled state
[  592.668579] device vethok5Tou entered promiscuous mode
[  592.669178] ADDRCONF(NETDEV_UP): vethok5Tou: link is not ready
[  592.670143] lo: Disabled Privacy Extensions
[  592.731383] ADDRCONF(NETDEV_CHANGE): vethok5Tou: link becomes ready
[  592.731410] br0: port 2(vethok5Tou) entering learning state
[  603.193114] eth9: no IPv6 routers present
[  603.240077] vethok5Tou: no IPv6 routers present
[  607.728109] br0: port 2(vethok5Tou) entering forwarding state
[  638.745087] br0: port 2(vethok5Tou) entering disabled state
[  638.776589] br0: port 2(vethok5Tou) entering disabled state
[  695.091190] device vethqcBB36 entered promiscuous mode
[  695.091810] ADDRCONF(NETDEV_UP): vethqcBB36: link is not ready
[  695.092785] lo: Disabled Privacy Extensions
[  695.138788] ADDRCONF(NETDEV_CHANGE): vethqcBB36: link becomes ready
[  695.138815] br0: port 2(vethqcBB36) entering learning state
[  705.156026] vethqcBB36: no IPv6 routers present
[  706.081538] veth0: no IPv6 routers present
[  707.173586] br0: port 2(vethqcBB36) entering disabled state
[  707.205093] br0: port 2(vethqcBB36) entering disabled state
[  762.115400] device vethjePSJ0 entered promiscuous mode
[  762.116001] ADDRCONF(NETDEV_UP): vethjePSJ0: link is not ready
[  762.116930] lo: Disabled Privacy Extensions
[  762.273577] br0: port 2(vethjePSJ0) entering disabled state
[  762.305090] br0: port 2(vethjePSJ0) entering disabled state
[ 1187.725262] device eth0 entered promiscuous mode
[ 1187.726791] r8169: eth0: link down
[ 1187.727353] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1312.145849] br1: port 1(eth0) entering disabled state
[ 1315.693977] r8169: eth0: link down
[ 1315.694519] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1326.568027] br1: no IPv6 routers present
[ 1339.991225] device veth0tHzGf entered promiscuous mode
[ 1339.991859] ADDRCONF(NETDEV_UP): veth0tHzGf: link is not ready
[ 1339.993465] device vethO3CjXg entered promiscuous mode
[ 1339.994068] ADDRCONF(NETDEV_UP): vethO3CjXg: link is not ready
[ 1339.995037] lo: Disabled Privacy Extensions
[ 1340.084290] ADDRCONF(NETDEV_CHANGE): veth0tHzGf: link becomes ready
[ 1340.084323] br0: port 2(veth0tHzGf) entering learning state
[ 1340.084825] ADDRCONF(NETDEV_CHANGE): vethO3CjXg: link becomes ready
[ 1340.084840] br1: port 2(vethO3CjXg) entering learning state
[ 1350.672021] eth0: no IPv6 routers present
[ 1350.712046] vethO3CjXg: no IPv6 routers present
[ 1350.872026] eth1: no IPv6 routers present
[ 1350.913029] veth0tHzGf: no IPv6 routers present
[ 1355.080210] br0: port 2(veth0tHzGf) entering forwarding state
[ 1355.084019] br1: port 2(vethO3CjXg) entering forwarding state
[ 1391.985592] br0: port 2(veth0tHzGf) entering disabled state
[ 1392.017097] br0: port 2(veth0tHzGf) entering disabled state
[ 1392.113585] br1: port 2(vethO3CjXg) entering disabled state
[ 1392.145087] br1: port 2(vethO3CjXg) entering disabled state
[ 1528.055393] device vethp4GQ7g entered promiscuous mode
[ 1528.056006] ADDRCONF(NETDEV_UP): vethp4GQ7g: link is not ready
[ 1528.058051] device vethaOnULb entered promiscuous mode
[ 1528.058679] ADDRCONF(NETDEV_UP): vethaOnULb: link is not ready
[ 1528.059631] lo: Disabled Privacy Extensions
[ 1528.135836] ADDRCONF(NETDEV_CHANGE): vethp4GQ7g: link becomes ready
[ 1528.135862] br0: port 2(vethp4GQ7g) entering learning state
[ 1528.136362] ADDRCONF(NETDEV_CHANGE): vethaOnULb: link becomes ready
[ 1528.136377] br1: port 2(vethaOnULb) entering learning state
[ 1532.515363] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 1532.516872] device-mapper: ioctl: error adding target to table
[ 1532.525324] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 1532.526750] device-mapper: ioctl: error adding target to table
[ 1532.537317] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 1532.538716] device-mapper: ioctl: error adding target to table
[ 1532.549315] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 1532.550701] device-mapper: ioctl: error adding target to table
[ 1532.561321] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 1532.562695] device-mapper: ioctl: error adding target to table
[ 1532.573318] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 1532.574685] device-mapper: ioctl: error adding target to table
[ 1532.585309] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 1532.586647] device-mapper: ioctl: error adding target to table
[ 1532.597319] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 1532.598631] device-mapper: ioctl: error adding target to table
[ 1532.609317] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 1532.610641] device-mapper: ioctl: error adding target to table
[ 1532.621314] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 1532.622601] device-mapper: ioctl: error adding target to table
[ 1532.633344] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 1532.634616] device-mapper: ioctl: error adding target to table
[ 1532.645309] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 1532.646585] device-mapper: ioctl: error adding target to table
[ 1532.657307] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 1532.658561] device-mapper: ioctl: error adding target to table
[ 1532.669305] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 1532.670539] device-mapper: ioctl: error adding target to table
[ 1532.681312] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 1532.682524] device-mapper: ioctl: error adding target to table
[ 1532.693313] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 1532.694521] device-mapper: ioctl: error adding target to table
[ 1532.705319] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 1532.706508] device-mapper: ioctl: error adding target to table
[ 1532.717319] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 1532.718500] device-mapper: ioctl: error adding target to table
[ 1532.729319] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 1532.730484] device-mapper: ioctl: error adding target to table
[ 1532.741319] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 1532.742468] device-mapper: ioctl: error adding target to table
[ 1538.288019] eth1: no IPv6 routers present
[ 1538.432026] eth0: no IPv6 routers present
[ 1538.572016] vethp4GQ7g: no IPv6 routers present
[ 1538.724062] vethaOnULb: no IPv6 routers present
[ 1543.132020] br0: port 2(vethp4GQ7g) entering forwarding state
[ 1543.132025] br1: port 2(vethaOnULb) entering forwarding state
[ 1547.504359] warning: `named' uses 32-bit capabilities (legacy support in use)
[ 1547.793211] tun: Universal TUN/TAP device driver, 1.6
[ 1547.793214] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1547.793807] tun0: Disabled Privacy Extensions
[ 1547.794064] ------------[ cut here ]------------
[ 1547.795225] kernel BUG at /build/buildd-linux-2.6_2.6.32-20-amd64-lNUT1p/linux-2.6-2.6.32/debian/build/source_amd64_none/fs/sysfs/file.c:539!
[ 1547.796499] invalid opcode: 0000 [#1] SMP 
[ 1547.797522] last sysfs file: /sys/devices/virtual/misc/tun/uevent
[ 1547.797522] CPU 1 
[ 1547.797522] Modules linked in: tun veth ipt_ULOG x_tables sco bnep rfcomm l2cap bluetooth rfkill ppdev lp fuse bridge stp loop firewire_sbp2 dm_crypt dm_mod saa7134_alsa tda1004x saa7134_dvb videobuf_dvb snd_hda_codec_intelhdmi snd_hda_codec_realtek tda827x tda8290 tuner snd_hda_intel snd_hda_codec snd_pcsp dvb_usb_cxusb dib7000p dibx000_common dvb_usb saa7134 dvb_core ir_common snd_hwdep i915 v4l2_common videodev v4l1_compat v4l2_compat_ioctl32 videobuf_dma_sg drm_kms_helper dib0070 videobuf_core drm tveeprom snd_pcm_oss snd_mixer_oss snd_pcm parport_pc parport i2c_algo_bit i2c_i801 i2c_core psmouse evdev snd_timer snd soundcore snd_page_alloc video output serio_raw button processor ext4 mbcache jbd2 crc16 raid1 md_mod sg sr_mod usbhid hid cdrom sd_mod crc_t10dif ata_generic r8169 uhci_hcd it8213 ehci_hcd ata_piix firewire_ohci firewire_core crc_itu_t ide_core libata mii e1000e scsi_mod thermal thermal_sys usbcore nls_base [last unloaded: scsi_wait_scan]
[ 1547.797522] Pid: 8075, comm: openvpn Not tainted 2.6.32-5-amd64 #1 EG45M-DS2H
[ 1547.797522] RIP: 0010:[<ffffffff8113d9ff>]  [<ffffffff8113d9ff>] sysfs_create_file+0x13/0x21
[ 1547.797522] RSP: 0000:ffff88013cc67d00  EFLAGS: 00010246
[ 1547.797522] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 1547.797522] RDX: 0000000000000001 RSI: ffffffffa04ad190 RDI: 0000000000000000
[ 1547.797522] RBP: ffff880128f97800 R08: ffffffff8149d210 R09: ffffffff81459690
[ 1547.797522] R10: ffffffff812fb2bb R11: 00000003812566e9 R12: ffff880128f97e80
[ 1547.797522] R13: ffff880128f8cc00 R14: 0000000000000000 R15: ffff88013cc67e78
[ 1547.797522] FS:  0000000000000000(0000) GS:ffff880005280000(0063) knlGS:00000000f751d5a0
[ 1547.797522] CS:  0010 DS: 002b ES: 002b CR0: 000000008005003b
[ 1547.797522] CR2: 00000000f77c6000 CR3: 000000013dbdd000 CR4: 00000000000006e0
[ 1547.797522] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1547.797522] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1547.797522] Process openvpn (pid: 8075, threadinfo ffff88013cc66000, task ffff88013ba51530)
[ 1547.797522] Stack:
[ 1547.797522]  ffffffffa04abc85 ffffffff8148f2f8 ffff880127da1a80 0000000000000000
[ 1547.797522] <0> 0000000000000001 ffff88013f5093f8 ffffffff811fe4b0 0000000000000000
[ 1547.797522] <0> 0000000000000000 0000000000003001 0000000000000000 ffff88013b29ea50
[ 1547.797522] Call Trace:
[ 1547.797522]  [<ffffffffa04abc85>] ? tun_chr_ioctl+0x38f/0x8fd [tun]
[ 1547.797522]  [<ffffffff811fe4b0>] ? misc_open+0x16f/0x179
[ 1547.797522]  [<ffffffff810f8c12>] ? vfs_ioctl+0x21/0x6c
[ 1547.797522]  [<ffffffff810f9160>] ? do_vfs_ioctl+0x48d/0x4cb
[ 1547.797522]  [<ffffffff810f6f27>] ? do_filp_open+0x4e4/0x94b
[ 1547.797522]  [<ffffffff810f91ef>] ? sys_ioctl+0x51/0x70
[ 1547.797522]  [<ffffffff8112212a>] ? dev_ifsioc+0x10f/0x24c
[ 1547.797522]  [<ffffffff81122e68>] ? compat_sys_ioctl+0x405/0x469
[ 1547.797522]  [<ffffffff81036482>] ? ia32_sysret+0x0/0x5
[ 1547.797522] Code: 74 0f 48 89 ef e8 24 07 00 00 eb 05 bb fe ff ff ff 89 d8 5b 5d 41 5c c3 48 85 ff 74 0e 48 8b 7f 30 48 85 ff 74 05 48 85 f6 75 04 <0f> 0b eb fe ba 02 00 00 00 e9 5d ff ff ff 55 53 48 89 fb 48 c7 
[ 1547.797522] RIP  [<ffffffff8113d9ff>] sysfs_create_file+0x13/0x21
[ 1547.797522]  RSP <ffff88013cc67d00>
[ 1547.855105] ---[ end trace 005701ec36330b73 ]---
[ 1933.074807] Ebtables v2.0 unregistered
[ 1933.699673] fuse exit

** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: EG45M-DS2H
product_version:  
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version:  
bios_vendor: Award Software International, Inc.
bios_version: F1
board_vendor: Gigabyte Technology Co., Ltd.
board_name: EG45M-DS2H
board_version: x.x

** Loaded modules:
Module                  Size  Used by
sco                     7209  2 
bnep                    9427  2 
rfcomm                 29581  0 
l2cap                  24736  6 bnep,rfcomm
bluetooth              41827  6 sco,bnep,rfcomm,l2cap
rfkill                 13044  2 bluetooth
ppdev                   5030  0 
lp                      7462  0 
ipt_ULOG                7129  1 
x_tables               12845  1 ipt_ULOG
fuse                   50190  1 
bridge                 39598  0 
stp                     1440  1 bridge
loop                   11783  0 
firewire_sbp2          11514  0 
dm_crypt               10507  0 
dm_mod                 53754  1 dm_crypt
saa7134_alsa            9535  0 
tda1004x               12855  1 
saa7134_dvb            18489  0 
videobuf_dvb            4130  1 saa7134_dvb
tda827x                 8731  2 
snd_hda_codec_intelhdmi    10695  1 
snd_hda_codec_realtek   235522  1 
tda8290                 9177  1 
dvb_usb_cxusb          50457  0 
dib7000p               13369  3 dvb_usb_cxusb
dibx000_common          2437  1 dib7000p
snd_pcsp                6579  0 
tuner                  16140  1 
i915                  254567  1 
snd_hda_intel          19987  0 
snd_hda_codec          54244  3 snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               5380  1 snd_hda_codec
dvb_usb                12276  1 dvb_usb_cxusb
snd_pcm_oss            32591  0 
snd_mixer_oss          12606  1 snd_pcm_oss
drm_kms_helper         20065  1 i915
snd_pcm                60471  5 saa7134_alsa,snd_pcsp,snd_hda_intel,snd_hda_codec,snd_pcm_oss
dvb_core               74634  3 videobuf_dvb,dib7000p,dvb_usb
drm                   142551  2 i915,drm_kms_helper
dib0070                 6413  3 dvb_usb_cxusb
saa7134               140356  2 saa7134_alsa,saa7134_dvb
ir_common              24271  1 saa7134
v4l2_common            11720  2 tuner,saa7134
snd_timer              15582  1 snd_pcm
videodev               29993  3 tuner,saa7134,v4l2_common
v4l1_compat            11442  1 videodev
v4l2_compat_ioctl32     8538  1 videodev
videobuf_dma_sg         8403  3 saa7134_alsa,saa7134_dvb,saa7134
videobuf_core          12244  3 videobuf_dvb,saa7134,videobuf_dma_sg
tveeprom               12057  1 saa7134
i2c_algo_bit            4225  1 i915
snd                    46446  11 saa7134_alsa,snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_pcsp,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore               4598  1 snd
snd_page_alloc          6249  2 snd_hda_intel,snd_pcm
parport_pc             18855  1 
video                  17445  1 i915
i2c_i801                7830  0 
parport                27954  3 ppdev,lp,parport_pc
evdev                   7352  12 
i2c_core               15712  18 tda1004x,saa7134_dvb,tda827x,tda8290,dib7000p,dibx000_common,tuner,i915,dvb_usb,drm_kms_helper,drm,dib0070,saa7134,v4l2_common,videodev,tveeprom,i2c_algo_bit,i2c_i801
output                  1692  1 video
psmouse                49777  0 
serio_raw               3752  0 
button                  4650  1 i915
processor              30247  4 
ext4                  288873  1 
mbcache                 5050  1 ext4
jbd2                   67015  1 ext4
crc16                   1319  2 l2cap,ext4
raid1                  18175  1 
md_mod                 73776  2 raid1
sd_mod                 29777  6 
crc_t10dif              1276  1 sd_mod
usbhid                 33260  0 
hid                    62841  1 usbhid
ata_generic             2983  0 
ata_piix               21012  3 
uhci_hcd               18521  0 
libata                133584  2 ata_generic,ata_piix
thermal                11674  0 
thermal_sys            11942  3 video,processor,thermal
it8213                  2524  0 
firewire_ohci          19468  0 
ide_core               71722  1 it8213
ehci_hcd               31135  0 
firewire_core          36800  2 firewire_sbp2,firewire_ohci
crc_itu_t               1307  1 firewire_core
scsi_mod              122117  3 firewire_sbp2,sd_mod,libata
e1000e                110015  0 
r8169                  28877  0 
mii                     3210  1 r8169
usbcore               121943  6 dvb_usb_cxusb,dvb_usb,usbhid,uhci_hcd,ehci_hcd
nls_base                6361  1 usbcore

** Network interface configuration:

auto lo
iface lo inet loopback

auto br0
iface br0 inet static
  address	172.27.179.3
  netmask	255.255.255.0
  gateway	172.27.179.2
  pre-up	ip link set down dev eth1
  pre-up	ip link show dev br0 >/dev/null 2>&1 || brctl addbr br0
  pre-up	ip link set up dev br0
  pre-up	brctl addif br0 eth1
  pre-up	ip link set up dev eth1
  post-down	ip link set down dev eth1
  post-down	brctl delif br0 eth1

auto br1
iface br1 inet manual
  pre-up	ip link set down dev eth0
  pre-up	ip link show dev br1 >/dev/null 2>&1 || brctl addbr br1
  pre-up	ip link set up dev br1
  pre-up	brctl addif br1 eth0
  pre-up	ip link set up dev eth0
  post-down	ip link set down dev eth0
  post-down	brctl delif br1 eth0


** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,PROMISC,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
    link/ether 00:1f:d0:26:75:a4 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:1b:21:29:7b:f4 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::21b:21ff:fe29:7bf4/64 scope link 
       valid_lft forever preferred_lft forever
4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN 
    link/ether 00:1b:21:29:7b:f4 brd ff:ff:ff:ff:ff:ff
    inet 172.27.179.3/24 brd 172.27.179.255 scope global br0
    inet6 fe80::e0f2:eeff:fe50:f5a3/64 scope link 
       valid_lft forever preferred_lft forever
5: br1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN 
    link/ether 00:1f:d0:26:75:a4 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::a0ca:9ff:fe55:c63b/64 scope link 
       valid_lft forever preferred_lft forever
6: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN 
    link/ether 02:d3:c1:66:61:38 brd ff:ff:ff:ff:ff:ff

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
    lo:   27874     272    0    0    0     0          0         0    27874     272    0    0    0     0       0          0
  eth0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
  eth1:  970275   11157    0    0    0     0          0       108   985723    2056    0    0    0     0       0          0
   br0:  772831   10275    0    0    0     0          0      7857   959959    1694    0    0    0     0       0          0
   br1:       0       0    0    0    0     0          0         0      468       6    0    0    0     0       0          0
  pan0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    2825 total packets received
    0 forwarded
    0 incoming packets discarded
    2825 incoming packets delivered
    1914 requests sent out
Icmp:
    368 ICMP messages received
    0 input ICMP message failed.
    ICMP input histogram:
        destination unreachable: 191
        echo requests: 87
        echo replies: 90
    199 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        destination unreachable: 22
        echo request: 90
        echo replies: 87
IcmpMsg:
        InType0: 90
        InType3: 191
        InType8: 87
        OutType0: 87
        OutType3: 22
        OutType8: 90
Tcp:
    200 active connections openings
    12 passive connection openings
    192 failed connection attempts
    4 connection resets received
    2 connections established
    2065 segments received
    1465 segments send out
    5 segments retransmited
    0 bad segments received.
    7 resets sent
Udp:
    318 packets received
    12 packets to unknown port received.
    0 packet receive errors
    243 packets sent
UdpLite:
TcpExt:
    5 TCP sockets finished time wait in fast timer
    48 delayed acks sent
    62 packets directly queued to recvmsg prequeue.
    19122 bytes directly received in process context from prequeue
    511 packet headers predicted
    16 packets header predicted and directly queued to user
    92 acknowledgments not containing data payload received
    1049 predicted acknowledgments
    5 other TCP timeouts
    3 connections reset due to unexpected data
IpExt:
    OutMcastPkts: 2
    InBcastPkts: 177
    OutBcastPkts: 30
    InOctets: 444503
    OutOctets: 962041
    OutMcastOctets: 80
    InBcastOctets: 20838
    OutBcastOctets: 3672

*** Device features:
br0: 0x111829
br1: 0x1800
eth0: 0x180
eth1: 0x110ba9
lo: 0x13865
pan0: 0xff3865

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e20] (rev 03)
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5000]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e22] (rev 03) (prog-if 00 [VGA controller])
	Subsystem: Giga-byte Technology Device [1458:d000]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 29
	Region 0: Memory at e3000000 (64-bit, non-prefetchable) [size=4M]
	Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at d100 [size=8]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e23] (rev 03)
	Subsystem: Giga-byte Technology Device [1458:d000]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at e3400000 (64-bit, non-prefetchable) [size=1M]
	Capabilities: <access denied>

00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at d200 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 21
	Region 4: I/O ports at d600 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at d000 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5006]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at e3705000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e]
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:a102]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at e3700000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: e3800000-e39fffff
	Prefetchable memory behind bridge: 00000000e3a00000-00000000e3bfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000a000-0000afff
	Memory behind bridge: e0000000-e1ffffff
	Prefetchable memory behind bridge: 00000000e3c00000-00000000e3dfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 [8086:3a4a] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000b000-0000bfff
	Memory behind bridge: e2000000-e2ffffff
	Prefetchable memory behind bridge: 00000000e3500000-00000000e35fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at d300 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at d400 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at d500 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5006]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at e3704000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: e3600000-e36fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16]
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5001]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: Giga-byte Technology Device [1458:b002]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at d700 [size=8]
	Region 1: I/O ports at d800 [size=4]
	Region 2: I/O ports at d900 [size=8]
	Region 3: I/O ports at da00 [size=4]
	Region 4: I/O ports at db00 [size=16]
	Region 5: I/O ports at dc00 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5001]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at e3706000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 0500 [size=32]
	Kernel driver in use: i801_smbus

00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26] (prog-if 85 [Master SecO PriO])
	Subsystem: Giga-byte Technology Device [1458:b002]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at de00 [size=8]
	Region 1: I/O ports at df00 [size=4]
	Region 2: I/O ports at e000 [size=8]
	Region 3: I/O ports at e100 [size=4]
	Region 4: I/O ports at e200 [size=16]
	Region 5: I/O ports at e300 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix

02:00.0 Ethernet controller [0200]: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) [8086:10b9] (rev 06)
	Subsystem: Intel Corporation PRO/1000 PT Desktop Adapter [8086:1083]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 28
	Region 0: Memory at e1020000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at e1000000 (32-bit, non-prefetchable) [size=128K]
	Region 2: I/O ports at a000 [size=32]
	[virtual] Expansion ROM at e3c00000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: e1000e

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:e000]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 27
	Region 0: I/O ports at b000 [size=256]
	Region 2: Memory at e3510000 (64-bit, prefetchable) [size=4K]
	Region 4: Memory at e3500000 (64-bit, prefetchable) [size=64K]
	[virtual] Expansion ROM at e3520000 [disabled] [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: r8169

04:00.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 62) (prog-if 00 [UHCI])
	Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 20
	Region 4: I/O ports at c000 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

04:00.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 62) (prog-if 00 [UHCI])
	Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at c100 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

04:00.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 65) (prog-if 20 [EHCI])
	Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 32 bytes
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at e3606000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

04:01.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:8625]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (63750ns min, 63750ns max)
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at e3604000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: saa7134

04:05.0 IDE interface [0101]: Integrated Technology Express, Inc. IT8213 IDE Controller [1283:8213] (prog-if 85 [Master SecO PriO])
	Subsystem: Giga-byte Technology Device [1458:b000]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (2000ns min, 2000ns max)
	Interrupt: pin A routed to IRQ 21
	Region 0: I/O ports at c200 [size=8]
	Region 1: I/O ports at c300 [size=4]
	Region 2: I/O ports at c400 [size=8]
	Region 3: I/O ports at c500 [size=4]
	Region 4: I/O ports at c600 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ITE8213_IDE

04:07.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI])
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:1000]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at e3605000 (32-bit, non-prefetchable) [size=2K]
	Region 1: Memory at e3600000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: firewire_ohci


** USB devices:
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 003: ID 0fe9:db98 DVICO 
Bus 009 Device 002: ID 0fe9:db98 DVICO 
Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 046d:c505 Logitech, Inc. Cordless Mouse+Keyboard Receiver
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii  debconf [debconf-2.0]         1.5.35     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.98       tools for generating an initramfs
ii  linux-base                    2.6.32-20  Linux image base package
ii  module-init-tools             3.12-1     tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii  firmware-linux-free           2.6.32-20  Binary firmware for various driver

Versions of packages linux-image-2.6.32-5-amd64 suggests:
ii  grub                          0.97-61    GRand Unified Bootloader (dummy pa
pn  linux-doc-2.6.32              <none>     (no description available)

Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
  linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
  linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
  linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
  linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:



Reply to: