Bug#586064: linux-image-2.6.32-trunk-686: slow mouse and IRQ #16 disable
Package: linux-2.6
Version: 2.6.32-5
Severity: normal
Hi,
since I installed linux-image-2.6.32-trunk-686 my mouse is slow and dmesg tells
that IRQ 16 is disabled.
cat /proc/interrupts
CPU0
0: 46 IO-APIC-edge timer
1: 2 IO-APIC-edge i8042
4: 2 IO-APIC-edge
6: 7 IO-APIC-edge floppy
8: 1 IO-APIC-edge rtc0
9: 0 IO-APIC-fasteoi acpi
14: 7704 IO-APIC-edge ide0
15: 2413 IO-APIC-edge ide1
16: 100105 IO-APIC-fasteoi uhci_hcd:usb2, uhci_hcd:usb5
17: 7040 IO-APIC-fasteoi Intel ICH5
18: 263 IO-APIC-fasteoi ata_piix, uhci_hcd:usb4, eth0
19: 0 IO-APIC-fasteoi uhci_hcd:usb3
20: 4 IO-APIC-fasteoi firewire_ohci
23: 2 IO-APIC-fasteoi ehci_hcd:usb1
NMI: 0 Non-maskable interrupts
LOC: 14739 Local timer interrupts
SPU: 0 Spurious interrupts
PMI: 0 Performance monitoring interrupts
PND: 0 Performance pending work
RES: 0 Rescheduling interrupts
CAL: 0 Function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
THR: 0 Threshold APIC interrupts
MCE: 0 Machine check exceptions
MCP: 1 Machine check polls
ERR: 0
MIS: 0
[ 22.909792] irq 16: nobody cared (try booting with the "irqpoll" option)
[ 22.909800] Pid: 0, comm: swapper Not tainted 2.6.32-trunk-686 #1
[ 22.909803] Call Trace:
[ 22.909814] [<c106d08d>] ? __report_bad_irq+0x24/0x69
[ 22.909820] [<c106d094>] ? __report_bad_irq+0x2b/0x69
[ 22.909824] [<c106d1b9>] ? note_interrupt+0xe7/0x13e
[ 22.909828] [<c106d6e7>] ? handle_fasteoi_irq+0x7a/0x97
[ 22.909834] [<c10053cf>] ? handle_irq+0x17/0x1b
[ 22.909838] [<c1004c51>] ? do_IRQ+0x38/0x89
[ 22.909843] [<c10037f0>] ? common_interrupt+0x30/0x38
[ 22.909850] [<c101b0c0>] ? native_safe_halt+0x2/0x3
[ 22.909855] [<c1008f1f>] ? default_idle+0x3c/0x5a
[ 22.909859] [<c1002388>] ? cpu_idle+0x89/0xa5
[ 22.909866] [<c1399800>] ? start_kernel+0x30c/0x311
[ 22.909868] handlers:
[ 22.909870] [<f7c537e5>] (usb_hcd_irq+0x0/0x71 [usbcore])
[ 22.909895] [<f7c537e5>] (usb_hcd_irq+0x0/0x71 [usbcore])
[ 22.909906] Disabling IRQ #16
Then I'm using kernel boot kernel 2.6.32-5-686 all is fine:
CPU0
0: 47 IO-APIC-edge timer
1: 2 IO-APIC-edge i8042
4: 1 IO-APIC-edge
6: 7 IO-APIC-edge floppy
8: 1 IO-APIC-edge rtc0
9: 0 IO-APIC-fasteoi acpi
14: 12735 IO-APIC-edge ata_piix
15: 2984 IO-APIC-edge ata_piix
16: 4575 IO-APIC-fasteoi uhci_hcd:usb2, uhci_hcd:usb5
17: 8510 IO-APIC-fasteoi Intel ICH5
18: 369 IO-APIC-fasteoi ata_piix, uhci_hcd:usb4, eth0
19: 0 IO-APIC-fasteoi uhci_hcd:usb3
20: 5 IO-APIC-fasteoi firewire_ohci
23: 2 IO-APIC-fasteoi ehci_hcd:usb1
NMI: 0 Non-maskable interrupts
LOC: 14704 Local timer interrupts
SPU: 0 Spurious interrupts
PMI: 0 Performance monitoring interrupts
PND: 0 Performance pending work
RES: 0 Rescheduling interrupts
CAL: 0 Function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
THR: 0 Threshold APIC interrupts
MCE: 0 Machine check exceptions
MCP: 1 Machine check polls
ERR: 0
MIS: 0
dmesg:ok
Bug http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=543275 is quite the same,
but for AMD64.
Thanks for Debian,
Ralf
-- Package-specific info:
** Version:
Linux version 2.6.32-trunk-686 (Debian 2.6.32-5) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 06:32:16 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-686 root=UUID=0f631a94-878c-4a49-970a-694cac15e33f ro quiet
** Not tainted
** Kernel log:
[ 22.368598] [TTM] Zone kernel: Used memory at exit: 0 kiB.
[ 22.368606] [TTM] Zone highmem: Used memory at exit: 0 kiB.
[ 22.368611] [drm] radeon: ttm finalized
[ 22.368617] [drm] Forcing AGP to PCI mode
[ 22.370960] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 22.370968] [drm] Generation 2 PCI interface, using max accessible memory
[ 22.370971] [drm] radeon: VRAM 128M
[ 22.370974] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
[ 22.370976] [drm] radeon: GTT 128M
[ 22.370978] [drm] radeon: GTT from 0x08000000 to 0x0FFFFFFF
[ 22.370992] [drm] radeon: irq initialized.
[ 22.371000] [drm] Detected VRAM RAM=128M, BAR=256M
[ 22.371002] [drm] RAM width 128bits DDR
[ 22.372911] [TTM] Zone kernel: Available graphics memory: 441496 kiB.
[ 22.372915] [TTM] Zone highmem: Available graphics memory: 1037436 kiB.
[ 22.372934] [drm] radeon: 128M of VRAM memory ready
[ 22.372937] [drm] radeon: 128M of GTT memory ready.
[ 22.372942] [drm] GART: num cpu pages 32768, num gpu pages 32768
[ 22.373518] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 22.373525] [drm] radeon: cp idle (0x10000C03)
[ 22.373568] [drm] Loading R300 Microcode
[ 22.373658] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[ 22.380318] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[ 22.380323] [drm:r100_cp_init] *ERROR* Failed to load firmware!
[ 22.380327] radeon 0000:01:00.0: failled initializing CP (-2).
[ 22.380330] radeon 0000:01:00.0: Disabling GPU acceleration
[ 22.381328] [drm] radeon: cp finalized
[ 22.381517] [drm] Default TV standard: PAL
[ 22.381520] [drm] 27.000000000 MHz TV ref clk
[ 22.381523] [drm] DFP table revision: 3
[ 22.381603] [drm] Radeon Display Connectors
[ 22.381606] [drm] Connector 0:
[ 22.381608] [drm] VGA
[ 22.381611] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 22.381613] [drm] Encoders:
[ 22.381615] [drm] CRT1: INTERNAL_DAC1
[ 22.381617] [drm] Connector 1:
[ 22.381619] [drm] DVI-I
[ 22.381622] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 22.381624] [drm] Encoders:
[ 22.381626] [drm] CRT2: INTERNAL_DAC2
[ 22.381628] [drm] DFP1: INTERNAL_TMDS1
[ 22.381630] [drm] Connector 2:
[ 22.381632] [drm] S-video
[ 22.381633] [drm] Encoders:
[ 22.381635] [drm] TV1: INTERNAL_DAC2
[ 22.619628] [drm] fb mappable at 0xD0040000
[ 22.619634] [drm] vram apper at 0xD0000000
[ 22.619639] [drm] size 5242880
[ 22.619643] [drm] fb depth is 24
[ 22.619647] [drm] pitch is 5120
[ 22.626269] Console: switching to colour frame buffer device 160x64
[ 22.626290] fb0: radeondrmfb frame buffer device
[ 22.626295] registered panic notifier
[ 22.626309] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[ 22.909792] irq 16: nobody cared (try booting with the "irqpoll" option)
[ 22.909800] Pid: 0, comm: swapper Not tainted 2.6.32-trunk-686 #1
[ 22.909803] Call Trace:
[ 22.909814] [<c106d08d>] ? __report_bad_irq+0x24/0x69
[ 22.909820] [<c106d094>] ? __report_bad_irq+0x2b/0x69
[ 22.909824] [<c106d1b9>] ? note_interrupt+0xe7/0x13e
[ 22.909828] [<c106d6e7>] ? handle_fasteoi_irq+0x7a/0x97
[ 22.909834] [<c10053cf>] ? handle_irq+0x17/0x1b
[ 22.909838] [<c1004c51>] ? do_IRQ+0x38/0x89
[ 22.909843] [<c10037f0>] ? common_interrupt+0x30/0x38
[ 22.909850] [<c101b0c0>] ? native_safe_halt+0x2/0x3
[ 22.909855] [<c1008f1f>] ? default_idle+0x3c/0x5a
[ 22.909859] [<c1002388>] ? cpu_idle+0x89/0xa5
[ 22.909866] [<c1399800>] ? start_kernel+0x30c/0x311
[ 22.909868] handlers:
[ 22.909870] [<f7c537e5>] (usb_hcd_irq+0x0/0x71 [usbcore])
[ 22.909895] [<f7c537e5>] (usb_hcd_irq+0x0/0x71 [usbcore])
[ 22.909906] Disabling IRQ #16
[ 24.008006] eth0: no IPv6 routers present
[ 68.440025] end_request: I/O error, dev fd0, sector 0
[ 68.468024] end_request: I/O error, dev fd0, sector 0
[ 212.528015] usb 1-5: new high speed USB device using ehci_hcd and address 3
[ 213.316244] usb 1-5: New USB device found, idVendor=090c, idProduct=1000
[ 213.316249] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 213.316253] usb 1-5: Product: USB DISK
[ 213.316255] usb 1-5: Manufacturer: SMI Corporation
[ 213.316258] usb 1-5: SerialNumber: AA04013000007453
[ 213.317262] usb 1-5: configuration #1 chosen from 1 choice
[ 213.392460] Initializing USB Mass Storage driver...
[ 213.392581] scsi2 : SCSI emulation for USB Mass Storage devices
[ 213.392767] usbcore: registered new interface driver usb-storage
[ 213.392771] USB Mass Storage support registered.
[ 213.396892] usb-storage: device found at 3
[ 213.396895] usb-storage: waiting for device to settle before scanning
[ 218.396475] usb-storage: device scan complete
[ 218.397586] scsi 2:0:0:0: Direct-Access Sharkoon Flexi-Drive EC2 1100 PQ: 0 ANSI: 0 CCS
[ 218.452433] sd 2:0:0:0: [sda] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
[ 218.453425] sd 2:0:0:0: [sda] Write Protect is off
[ 218.453429] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 218.453432] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 218.456430] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 218.456436] sda: sda1
[ 218.459299] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 218.459305] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 219.014820] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
** Model information
not available
** Loaded modules:
Module Size Used by
nls_utf8 908 1
nls_cp437 4489 1
vfat 6506 1
fat 34776 1 vfat
sd_mod 25717 2
crc_t10dif 1012 1 sd_mod
usb_storage 29825 1
speedstep_lib 2468 0
cpufreq_powersave 602 0
cpufreq_conservative 4018 0
cpufreq_stats 1940 0
cpufreq_userspace 1444 0
radeon 398255 1
ttm 26008 1 radeon
drm_kms_helper 17183 1 radeon
drm 107507 3 radeon,ttm,drm_kms_helper
i2c_algo_bit 3497 1 radeon
ppdev 4058 0
lp 5570 0
parport 22554 2 ppdev,lp
binfmt_misc 4875 1
fuse 43554 5
loop 9721 0
firewire_sbp2 9575 0
snd_intel8x0 19523 3
snd_ac97_codec 79136 1 snd_intel8x0
ac97_bus 710 1 snd_ac97_codec
snd_pcm_oss 28479 0
snd_mixer_oss 10461 1 snd_pcm_oss
snd_pcm 47350 4 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_midi 3480 0
shpchp 21220 0
snd_rawmidi 12313 1 snd_seq_midi
pci_hotplug 18065 1 shpchp
snd_seq_midi_event 3684 1 snd_seq_midi
snd_seq 35303 3 snd_seq_midi,snd_seq_midi_event
evdev 5609 10
usbhid 26784 0
snd_timer 12258 3 snd_pcm,snd_seq
hid 50545 1 usbhid
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
pcspkr 1207 0
snd 33551 14 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i2c_i801 6442 0
i2c_core 12612 4 radeon,drm,i2c_algo_bit,i2c_i801
soundcore 3450 1 snd
snd_page_alloc 4977 2 snd_intel8x0,snd_pcm
intel_agp 20145 1
rng_core 2178 0
agpgart 19516 3 ttm,drm,intel_agp
processor 25803 0
button 3598 0
serio_raw 2916 0
ext3 93828 1
jbd 31965 1 ext3
mbcache 3762 1 ext3
ide_cd_mod 21044 0
ide_gd_mod 17103 5
cdrom 26487 1 ide_cd_mod
ide_pci_generic 1924 0
ata_generic 2015 0
ata_piix 16513 0
fan 2586 0
uhci_hcd 15953 0
8139too 14849 0
firewire_ohci 16477 0
piix 3564 4
thermal 9206 0
libata 113728 2 ata_generic,ata_piix
8139cp 13285 0
mii 2714 2 8139too,8139cp
firewire_core 30915 2 firewire_sbp2,firewire_ohci
crc_itu_t 1035 1 firewire_core
floppy 40923 0
ehci_hcd 27230 0
thermal_sys 9378 3 processor,fan,thermal
ide_core 63850 4 ide_cd_mod,ide_gd_mod,ide_pci_generic,piix
scsi_mod 101073 4 sd_mod,usb_storage,firewire_sbp2,libata
usbcore 97930 5 usb_storage,usbhid,uhci_hcd,ehci_hcd
nls_base 4541 5 nls_utf8,nls_cp437,vfat,fat,usbcore
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:fb61]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 82865G/PE/P PCI to AGP Controller [8086:2571] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f8000000-f80fffff
Prefetchable memory behind bridge: d0000000-efffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface [8086:2576] (rev 02)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]
00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:fb61]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at e300 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:fb61]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:fb61]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e100 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:fb61]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at e200 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:fb61]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at f8200000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f8100000-f81fffff
Prefetchable memory behind bridge: 80000000-800fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:fb61]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at 80100000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: PIIX_IDE
00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:fb61]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at e400 [size=8]
Region 1: I/O ports at e500 [size=4]
Region 2: I/O ports at e600 [size=8]
Region 3: I/O ports at e700 [size=4]
Region 4: I/O ports at e800 [size=16]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:fb61]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:c09d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at ea00 [size=256]
Region 1: I/O ports at eb00 [size=64]
Region 2: Memory at f8201000 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at f8202000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 AR [Radeon 9600] [1002:4152] (prog-if 00 [VGA controller])
Subsystem: Hightech Information System Ltd. Device [17af:2016]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at c000 [size=256]
Region 2: Memory at f8030000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at f8000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
01:00.1 Display controller [0380]: ATI Technologies Inc RV350 AR [Radeon 9600] (Secondary) [1002:4172]
Subsystem: Hightech Information System Ltd. Device [17af:2017]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at e0000000 (32-bit, prefetchable) [disabled] [size=256M]
Region 1: Memory at f8020000 (32-bit, non-prefetchable) [disabled] [size=64K]
Capabilities: <access denied>
02:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at d000 [size=256]
Region 1: Memory at f8111000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 80000000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: 8139too
02:08.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev 80) (prog-if 10 [OHCI])
Subsystem: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at f8110000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at d100 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 0557:2213 ATEN International Co., Ltd
Bus 002 Device 002: ID 0557:7000 ATEN International Co., Ltd Hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 090c:1000 Feiya Technology Corp. Flash Drive
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-trunk-686 (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-trunk-686 depends on:
ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy
ii initramfs-tools [linux-initr 0.94.4 tools for generating an initramfs
ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-trunk-686 recommends:
ii firmware-linux-free 2.6.32-15 Binary firmware for various driver
ii libc6-i686 2.11.1-3 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-trunk-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-trunk-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information:
linux-image-2.6.32-trunk-686/prerm/would-invalidate-boot-loader-2.6.32-trunk-686: true
linux-image-2.6.32-trunk-686/postinst/bootloader-test-error-2.6.32-trunk-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-trunk-686/postinst/depmod-error-initrd-2.6.32-trunk-686: false
linux-image-2.6.32-trunk-686/prerm/removing-running-kernel-2.6.32-trunk-686: true
linux-image-2.6.32-trunk-686/postinst/bootloader-error-2.6.32-trunk-686:
* linux-image-2.6.32-trunk-686/postinst/missing-firmware-2.6.32-trunk-686:
Reply to: