Bug#585961: linux-image-2.6.32-5-686: External monitor's available resolutions not properly detected
Package: linux-2.6
Version: 2.6.32-15
Severity: important
With linux-image-2.6.32-5-686 kernel, I can't use my external monitor to its
best resolution (1680x1040), only degraded ones ! In the 'dmesg' output, I can
see some EDID errors :
[ 2.252580] [drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder
is 191
[ 2.252656] [drm:edid_is_valid] *ERROR* Raw EDID:
[ 2.252719] <3>00 ff ff ff ff ff ff 00 22 ff e9 ff 6f ff 00 ff
........"...o...
[ 2.252726] <3>2e ff 01 ff 80 00 00 00 00 00 00 00 00 00 00 00
................
[ 2.252731] <3>00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff
................
[ 2.252737] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
................
[ 2.252743] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
................
[ 2.252748] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
................
[ 2.252754] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
................
[ 2.252759] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
.............[ 2.150690] [drm:edid_is_valid] *ERROR* EDID checksum is
invalid, remainder i
s 12
[ 2.150765] [drm:edid_is_valid] *ERROR* Raw EDID:
[ 2.150828] <3>00 ff ff ff ff ff ff 00 22 64 e9 03 6f 0a 00 00
........"d..o
...
[ 2.150835] <3>2e 12 01 03 80 16 0d 78 0a 86 26 94 57 51 90 27
.......x..&.W
Q.'
[ 2.150840] <3>21 4f 54 00 00 00 01 01 01 01 01 01 01 01 01 01
!OT..........
...
[ 2.150846] <3>01 01 01 01 01 01 94 11 00 b0 40 58 19 20 35 23
..........@X.
5#
[ 2.150852] <3>45 00 dc 81 00 00 00 19 16 14 00 d8 40 58 26 20
E...........@
X&
[ 2.150858] <3>5d 23 15 04 dc 81 00 00 00 00 00 00 00 fe 00 00
]#...........
...
[ 2.150863] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe
.............
...
[ 2.150869] <3>00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 3f
.............
..?
[ 2.150873]
[ 2.252580] [drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder
i
s 191
...
And then, I can only get a 1360x768 resolution (instead of 1680x1440) :
$ xrandr -q
Screen 0: minimum 320 x 200, current 1360 x 768, maximum 4096 x 4096
VGA1 connected 1360x768+0+0 (normal left inverted right x axis y axis) 0mm x
0mm
1360x768 59.8*
1024x768 60.0
800x600 60.3 56.2
848x480 60.0
640x480 59.9 59.9
LVDS1 connected (normal left inverted right x axis y axis)
1024x600 60.0 +
640x480 59.9
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-15) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 04:59:47 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=e295254a-3f31-41d0-91b3-01c982751390 ro quiet init=/sbin/bootchartd
** Not tainted
** Kernel log:
[ 19.739615] elantech.c: assuming hardware version 2, firmware version 2.48
[ 19.761675] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 19.805114] usb 1-8: new high speed USB device using ehci_hcd and address 4
[ 19.822137] elantech.c: Synaptics capabilities query result 0x00, 0x02, 0x64.
[ 20.038576] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
[ 20.085187] usb 1-8: New USB device found, idVendor=05e3, idProduct=0505
[ 20.085203] usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 20.085215] usb 1-8: Product: USB 2.0 Camera
[ 20.085469] usb 1-8: configuration #1 chosen from 1 choice
[ 20.145841] Linux video capture interface: v2.00
[ 20.154843] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (05e3:0505)
[ 20.293704] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input8
[ 20.293872] usbcore: registered new interface driver uvcvideo
[ 20.293883] USB Video Class driver (v0.1.0)
[ 20.340089] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 20.593783] usb 3-1: New USB device found, idVendor=1e54, idProduct=2030
[ 20.593799] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 20.593812] usb 3-1: Product: USB Keyboard
[ 20.593821] usb 3-1: Manufacturer: TypeMatrix.com
[ 20.594114] usb 3-1: configuration #1 chosen from 1 choice
[ 20.648490] usbcore: registered new interface driver hiddev
[ 20.685522] input: TypeMatrix.com USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input9
[ 20.685713] generic-usb 0003:1E54:2030.0001: input,hidraw0: USB HID v1.10 Keyboard [TypeMatrix.com USB Keyboard] on usb-0000:00:1d.1-1/input0
[ 20.686341] usb 1-4.6: new low speed USB device using ehci_hcd and address 5
[ 20.756730] input: TypeMatrix.com USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input10
[ 20.757478] generic-usb 0003:1E54:2030.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [TypeMatrix.com USB Keyboard] on usb-0000:00:1d.1-1/input1
[ 20.757546] usbcore: registered new interface driver usbhid
[ 20.757556] usbhid: v2.6:USB HID core driver
[ 20.781289] usb 1-4.6: New USB device found, idVendor=047d, idProduct=1020
[ 20.781306] usb 1-4.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 20.781318] usb 1-4.6: Product: Kensington Expert Mouse
[ 20.781328] usb 1-4.6: Manufacturer: Kensington
[ 20.781532] usb 1-4.6: configuration #1 chosen from 1 choice
[ 20.786650] input: Kensington Kensington Expert Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.6/1-4.6:1.0/input/input11
[ 20.787332] generic-usb 0003:047D:1020.0003: input,hidraw2: USB HID v1.10 Mouse [Kensington Kensington Expert Mouse] on usb-0000:00:1d.7-4.6/input0
[ 21.325262] Adding 2096440k swap on /dev/sda5. Priority:-1 extents:1 across:2096440k
[ 21.389092] EXT3 FS on sda8, internal journal
[ 21.460147] loop: module loaded
[ 22.083261] kjournald starting. Commit interval 5 seconds
[ 22.083876] EXT3 FS on sda7, internal journal
[ 22.083894] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.815389] RPC: Registered udp transport module.
[ 22.815395] RPC: Registered tcp transport module.
[ 22.815400] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 22.845042] Slow work thread pool: Starting up
[ 22.845183] Slow work thread pool: Ready
[ 22.845342] FS-Cache: Loaded
[ 22.890463] FS-Cache: Netfs 'nfs' registered for caching
[ 22.925552] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 23.054480] fuse init (API version 7.13)
[ 23.807782] svc: failed to register lockdv1 RPC service (errno 97).
[ 23.818102] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 23.823197] NFSD: starting 90-second grace period
[ 23.895882] ATL1E 0000:02:00.0: irq 27 for MSI/MSI-X
[ 23.896155] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 23.896544] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.897071] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 24.524097] Bluetooth: Core ver 2.15
[ 24.529153] NET: Registered protocol family 31
[ 24.529159] Bluetooth: HCI device and connection manager initialized
[ 24.529167] Bluetooth: HCI socket layer initialized
[ 24.587313] Bluetooth: L2CAP ver 2.14
[ 24.587321] Bluetooth: L2CAP socket layer initialized
[ 24.644871] Bluetooth: RFCOMM TTY layer initialized
[ 24.644888] Bluetooth: RFCOMM socket layer initialized
[ 24.644895] Bluetooth: RFCOMM ver 1.11
[ 24.680134] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.680144] Bluetooth: BNEP filters: protocol multicast
[ 24.746525] Bridge firewalling registered
[ 24.801456] lp: driver loaded but no devices found
[ 24.809635] Bluetooth: SCO (Voice Link) ver 0.6
[ 24.809643] Bluetooth: SCO socket layer initialized
[ 24.862663] ppdev: user-space parallel port driver
[ 26.275699] composite sync not supported
[ 26.412659] composite sync not supported
[ 34.372029] eth0: no IPv6 routers present
[ 42.940168] composite sync not supported
[ 43.117011] composite sync not supported
[ 43.252221] composite sync not supported
[ 55.385140] CPU0 attaching NULL sched-domain.
[ 55.385153] CPU1 attaching NULL sched-domain.
[ 55.413166] CPU0 attaching sched-domain:
[ 55.413176] domain 0: span 0-1 level SIBLING
[ 55.413185] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 55.413201] domain 1: span 0-1 level MC
[ 55.413207] groups: 0-1 (cpu_power = 1178)
[ 55.413221] CPU1 attaching sched-domain:
[ 55.413227] domain 0: span 0-1 level SIBLING
[ 55.413234] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 55.413249] domain 1: span 0-1 level MC
[ 55.413255] groups: 0-1 (cpu_power = 1178)
[ 77.410678] composite sync not supported
[ 79.628880] composite sync not supported
[ 105.437055] composite sync not supported
[ 108.508645] composite sync not supported
[ 133.560983] composite sync not supported
[ 151.132879] composite sync not supported
[ 162.136701] composite sync not supported
[ 327.825123] composite sync not supported
[ 336.049082] composite sync not supported
** Model information
not available
** Loaded modules:
Module Size Used by
acpi_cpufreq 4943 0
ppdev 4058 0
sco 5857 2
lp 5570 0
parport 22554 2 ppdev,lp
cpufreq_stats 1940 0
bridge 32987 0
stp 996 1 bridge
cpufreq_powersave 602 0
bnep 7444 2
cpufreq_userspace 1480 0
rfcomm 25167 0
l2cap 21705 6 bnep,rfcomm
crc16 1027 1 l2cap
cpufreq_conservative 4018 0
bluetooth 36327 6 sco,bnep,rfcomm,l2cap
autofs4 16667 8
binfmt_misc 4907 1
fuse 43758 1
nfsd 193279 13
exportfs 2618 1 nfsd
nfs 206782 0
lockd 49437 2 nfsd,nfs
fscache 24662 1 nfs
nfs_acl 1695 2 nfsd,nfs
auth_rpcgss 25240 2 nfsd,nfs
sunrpc 134604 12 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
loop 9757 0
usbhid 27980 0
hid 50629 1 usbhid
uvcvideo 45226 0
videodev 25545 1 uvcvideo
v4l1_compat 10250 2 uvcvideo,videodev
joydev 6771 0
snd_hda_codec_realtek 163214 1
snd_hda_intel 16703 2
snd_hda_codec 46002 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4054 1 snd_hda_codec
snd_pcm_oss 28671 0
snd_mixer_oss 10461 1 snd_pcm_oss
snd_pcm 47214 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 3576 0
snd_rawmidi 12505 1 snd_seq_midi
snd_seq_midi_event 3684 1 snd_seq_midi
snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event
snd_timer 12258 2 snd_pcm,snd_seq
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
arc4 974 2
ecb 1405 2
snd 34363 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
ath9k 238333 0
mac80211 123258 1 ath9k
ath 6014 1 ath9k
uhci_hcd 16057 0
serio_raw 2916 0
cfg80211 87601 3 ath9k,mac80211,ath
rfkill 10264 3 bluetooth,cfg80211
soundcore 3450 1 snd
tpm_tis 5496 0
tpm 8137 1 tpm_tis
tpm_bios 3569 1 tpm
battery 3782 0
ac 1640 0
ehci_hcd 27763 0
rng_core 2178 0
atl1e 23144 0
evdev 5609 28
psmouse 44653 0
usbcore 98402 5 usbhid,uvcvideo,uhci_hcd,ehci_hcd
led_class 1757 1 ath9k
snd_page_alloc 5045 2 snd_hda_intel,snd_pcm
nls_base 4541 1 usbcore
processor 26599 3 acpi_cpufreq
ext3 94204 2
jbd 32169 1 ext3
mbcache 3762 1 ext3
sd_mod 25869 4
crc_t10dif 1012 1 sd_mod
i915 219952 3
drm_kms_helper 18305 1 i915
ata_generic 2019 0
drm 112020 4 i915,drm_kms_helper
i2c_algo_bit 3497 1 i915
ata_piix 17640 3
i2c_core 12696 5 videodev,i915,drm_kms_helper,drm,i2c_algo_bit
libata 115665 2 ata_generic,ata_piix
video 14605 1 i915
thermal 9206 0
scsi_mod 101401 2 sd_mod,libata
thermal_sys 9378 3 processor,video,thermal
output 1204 1 video
button 3598 1 i915
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:23:54:89:62:a6 brd ff:ff:ff:ff:ff:ff
inet 10.99.0.196/21 brd 10.99.7.255 scope global eth0
inet6 fe80::223:54ff:fe89:62a6/64 scope link
valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:22:43:53:21:6c brd ff:ff:ff:ff:ff:ff
4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether a6:64:d8:ed:7a:47 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 679602 8341 0 0 0 0 0 0 679602 8341 0 0 0 0 0 0
eth0:115331284 132796 0 0 0 0 0 61 13989203 82582 0 0 0 0 1 0
wlan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
140065 total packets received
7 with invalid addresses
0 forwarded
0 incoming packets discarded
140058 incoming packets delivered
87769 requests sent out
32 outgoing packets dropped
Icmp:
61 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 40
echo requests: 20
echo replies: 1
61 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 40
echo request: 1
echo replies: 20
IcmpMsg:
InType0: 1
InType3: 40
InType8: 20
OutType0: 20
OutType3: 40
OutType8: 1
Tcp:
37 active connections openings
10 passive connection openings
1 failed connection attempts
0 connection resets received
12 connections established
140046 segments received
88365 segments send out
0 segments retransmited
0 bad segments received.
4 resets sent
Udp:
534 packets received
40 packets to unknown port received.
0 packet receive errors
267 packets sent
UdpLite:
TcpExt:
11 TCP sockets finished time wait in fast timer
2186 delayed acks sent
3 delayed acks further delayed because of locked socket
19 packets directly queued to recvmsg prequeue.
10 bytes directly received in process context from prequeue
116127 packet headers predicted
139 acknowledgments not containing data payload received
50080 predicted acknowledgments
IpExt:
InMcastPkts: 58
OutMcastPkts: 14
InBcastPkts: 564
InOctets: 114028773
OutOctets: 13281020
InMcastOctets: 8599
OutMcastOctets: 2705
InBcastOctets: 96573
*** Device features:
eth0: 0x11989
lo: 0x13865
pan0: 0xff3865
wlan0: 0x2000
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fbd00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at dc80 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at fbcc0000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fbd80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:834a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fbcb8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 40000000-401fffff
Prefetchable memory behind bridge: 0000000040200000-00000000403fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
Prefetchable memory behind bridge: 0000000040400000-00000000405fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fbe00000-fbefffff
Prefetchable memory behind bridge: 0000000040600000-00000000407fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 21
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 20
Region 4: I/O ports at dc00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fbcb7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 0400 [size=32]
01:00.0 Network controller [0280]: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)
Subsystem: Device [1a3b:1067]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fbef0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
02:00.0 Ethernet controller [0200]: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0)
Subsystem: ASUSTeK Computer Inc. Device [1043:8324]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 27
Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at ec80 [size=128]
Capabilities: <access denied>
Kernel driver in use: ATL1E
** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 1e54:2030 TypeMatrix 2030 USB Keyboard
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 047d:1020 Kensington Expert Mouse Trackball
Bus 001 Device 004: ID 05e3:0505 Genesys Logic, Inc.
Bus 001 Device 003: ID 050d:0307 Belkin Components
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (800, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy
ii initramfs-tools [linux-initr 0.94.4 tools for generating an initramfs
ii linux-base 2.6.32-15 Linux image base package
ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
ii firmware-linux-free 2.6.32-15 Binary firmware for various driver
ii libc6-i686 2.11.1-3 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/prerm/would-invalidate-boot-loader-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/bootloader-test-error-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/bootloader-error-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-15) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 04:59:47 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7a0000 (usable)
[ 0.000000] BIOS-e820: 000000003f7a0000 - 000000003f7ae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f7ae000 - 000000003f7f0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x3f7a0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-E3FFF write-protect
[ 0.000000] E4000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 2f7cd000 - 2f9f72ec
[ 0.000000] ACPI: RSDP 000fbcf0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 3f7a0000 0003C (v01 A_M_I_ OEMRSDT 08000920 MSFT 00000097)
[ 0.000000] ACPI: FACP 3f7a0200 00084 (v02 A_M_I_ OEMFACP 08000920 MSFT 00000097)
[ 0.000000] ACPI: DSDT 3f7a0430 07BA9 (v01 P0031 P0031000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 3f7ae000 00040
[ 0.000000] ACPI: APIC 3f7a0390 0005C (v01 A_M_I_ OEMAPIC 08000920 MSFT 00000097)
[ 0.000000] ACPI: MCFG 3f7a03f0 0003C (v01 A_M_I_ OEMMCFG 08000920 MSFT 00000097)
[ 0.000000] ACPI: OEMB 3f7ae040 00061 (v01 A_M_I_ AMI_OEM 08000920 MSFT 00000097)
[ 0.000000] ACPI: HPET 3f7a7fe0 00038 (v01 A_M_I_ OEMHPET 08000920 MSFT 00000097)
[ 0.000000] ACPI: SSDT 3f7aeb80 004F0 (v01 PmRef CpuPm 00003000 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 131MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014c3154] TEXT DATA BSS ==> [0001000000 - 00014c3154]
[ 0.000000] #4 [002f7cd000 - 002f9f72ec] RAMDISK ==> [002f7cd000 - 002f9f72ec]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [00014c4000 - 00014ca1f8] BRK ==> [00014c4000 - 00014ca1f8]
[ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0003f7a0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f7a0
[ 0.000000] On node 0 totalpages: 259887
[ 0.000000] free_area_init_node: node 0, pgdat c13ae680, node_mem_map c14cc200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 264 pages used for memmap
[ 0.000000] HighMem zone: 33434 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3f800000 (gap: 3f800000:bf600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34136 r0 d23208 u2097152
[ 0.000000] pcpu-alloc: s34136 r0 d23208 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257855
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=e295254a-3f31-41d0-91b3-01c982751390 ro quiet init=/sbin/bootchartd
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0003f7a0)
[ 0.000000] Memory: 1022752k/1040000k available (2490k kernel code, 16212k reserved, 1318k data, 372k init, 134792k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13b9000 - 0xc1416000 ( 372 kB)
[ 0.000000] .data : 0xc126e965 - 0xc13b81e0 (1318 kB)
[ 0.000000] .text : 0xc1000000 - 0xc126e965 (2490 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1600.275 MHz processor.
[ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.55 BogoMIPS (lpj=6401100)
[ 0.004045] Security Framework initialized
[ 0.004054] SELinux: Disabled at boot.
[ 0.004071] Mount-cache hash table entries: 512
[ 0.004293] Initializing cgroup subsys ns
[ 0.004302] Initializing cgroup subsys cpuacct
[ 0.004312] Initializing cgroup subsys devices
[ 0.004317] Initializing cgroup subsys freezer
[ 0.004322] Initializing cgroup subsys net_cls
[ 0.004357] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.004363] CPU: L2 cache: 512K
[ 0.004368] CPU: Physical Processor ID: 0
[ 0.004372] CPU: Processor Core ID: 0
[ 0.004379] mce: CPU supports 5 MCE banks
[ 0.004395] CPU0: Thermal monitoring enabled (TM2)
[ 0.004402] using mwait in idle threads.
[ 0.004413] Performance Events: Atom events, Intel PMU driver.
[ 0.004425] ... version: 3
[ 0.004429] ... bit width: 40
[ 0.004433] ... generic registers: 2
[ 0.004438] ... value mask: 000000ffffffffff
[ 0.004442] ... max period: 000000007fffffff
[ 0.004446] ... fixed-purpose events: 3
[ 0.004450] ... event mask: 0000000700000003
[ 0.004458] Checking 'hlt' instruction... OK.
[ 0.021613] ACPI: Core revision 20090903
[ 0.044011] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.044481] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.084187] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.088001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.008000] CPU: L2 cache: 512K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 0
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.172128] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.172157] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.176079] Brought up 2 CPUs
[ 0.176087] Total of 2 processors activated (6400.55 BogoMIPS).
[ 0.176310] CPU0 attaching sched-domain:
[ 0.176318] domain 0: span 0-1 level SIBLING
[ 0.176324] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 0.176336] domain 1: span 0-1 level MC
[ 0.176342] groups: 0-1 (cpu_power = 1178)
[ 0.176353] CPU1 attaching sched-domain:
[ 0.176358] domain 0: span 0-1 level SIBLING
[ 0.176363] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 0.176374] domain 1: span 0-1 level MC
[ 0.176379] groups: 0-1 (cpu_power = 1178)
[ 0.176589] devtmpfs: initialized
[ 0.176589] regulator: core version 0.5
[ 0.176589] NET: Registered protocol family 16
[ 0.176589] ACPI: bus type pci registered
[ 0.176589] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
[ 0.176589] PCI: Not using MMCONFIG.
[ 0.176796] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[ 0.176801] PCI: Using configuration type 1 for base access
[ 0.177482] bio: create slab <bio-0> at 0
[ 0.180993] ACPI: EC: Look up EC in DSDT
[ 0.183240] ACPI: BIOS _OSI(Linux) query ignored
[ 0.183459] ACPI Error (dswload-0781): [RHUB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.183471] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20090903/psloop-230)
[ 0.183483] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node c14bb530), AE_ALREADY_EXISTS
[ 0.183496] ACPI: Marking method \___ as Serialized because of AE_ALREADY_EXISTS error
[ 0.183590] ACPI Error (dswload-0781): [RHUB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.183601] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20090903/psloop-230)
[ 0.183612] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node c14bb530), AE_ALREADY_EXISTS
[ 0.183624] ACPI: Marking method \___ as Serialized because of AE_ALREADY_EXISTS error
[ 0.183719] ACPI Error (dswload-0781): [RHUB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.183730] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20090903/psloop-230)
[ 0.183741] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node c14bb530), AE_ALREADY_EXISTS
[ 0.183752] ACPI: Marking method \___ as Serialized because of AE_ALREADY_EXISTS error
[ 0.183846] ACPI Error (dswload-0781): [RHUB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.183856] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20090903/psloop-230)
[ 0.183867] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node c14bb530), AE_ALREADY_EXISTS
[ 0.183879] ACPI: Marking method \___ as Serialized because of AE_ALREADY_EXISTS error
[ 0.183962] ACPI: Executed 6 blocks of module-level executable AML code
[ 0.194221] ACPI: Interpreter enabled
[ 0.194243] ACPI: (supports S0 S3 S4 S5)
[ 0.194290] ACPI: Using IOAPIC for interrupt routing
[ 0.194385] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
[ 0.198813] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.198819] PCI: Using MMCONFIG for extended config space
[ 0.210160] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.210548] ACPI: No dock devices found.
[ 0.210794] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.210932] pci 0000:00:02.0: reg 10 32bit mmio: [0xfbd00000-0xfbd7ffff]
[ 0.210943] pci 0000:00:02.0: reg 14 io port: [0xdc80-0xdc87]
[ 0.210952] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.210961] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfbcc0000-0xfbcfffff]
[ 0.211013] pci 0000:00:02.1: reg 10 32bit mmio: [0xfbd80000-0xfbdfffff]
[ 0.211152] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfbcb8000-0xfbcbbfff]
[ 0.211227] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.211235] pci 0000:00:1b.0: PME# disabled
[ 0.211349] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.211357] pci 0000:00:1c.0: PME# disabled
[ 0.211473] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.211482] pci 0000:00:1c.1: PME# disabled
[ 0.211598] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.211606] pci 0000:00:1c.2: PME# disabled
[ 0.211691] pci 0000:00:1d.0: reg 20 io port: [0xd480-0xd49f]
[ 0.211774] pci 0000:00:1d.1: reg 20 io port: [0xd800-0xd81f]
[ 0.211856] pci 0000:00:1d.2: reg 20 io port: [0xd880-0xd89f]
[ 0.211938] pci 0000:00:1d.3: reg 20 io port: [0xdc00-0xdc1f]
[ 0.212045] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfbcb7c00-0xfbcb7fff]
[ 0.212122] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.212131] pci 0000:00:1d.7: PME# disabled
[ 0.212333] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.212341] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.212349] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0380 (mask 0003)
[ 0.212357] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
[ 0.212366] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0003)
[ 0.212451] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.212463] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.212475] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.212486] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.212499] pci 0000:00:1f.2: reg 20 io port: [0xffa0-0xffaf]
[ 0.212542] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.212550] pci 0000:00:1f.2: PME# disabled
[ 0.212620] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.212817] pci 0000:02:00.0: reg 10 64bit mmio: [0xfbfc0000-0xfbffffff]
[ 0.212833] pci 0000:02:00.0: reg 18 io port: [0xec80-0xecff]
[ 0.212925] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.212934] pci 0000:02:00.0: PME# disabled
[ 0.212985] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.213093] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
[ 0.213102] pci 0000:00:1c.1: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
[ 0.213193] pci 0000:01:00.0: reg 10 64bit mmio: [0xfbef0000-0xfbefffff]
[ 0.213293] pci 0000:01:00.0: supports D1
[ 0.213298] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[ 0.213307] pci 0000:01:00.0: PME# disabled
[ 0.213362] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.213473] pci 0000:00:1c.2: bridge 32bit mmio: [0xfbe00000-0xfbefffff]
[ 0.213550] pci 0000:00:1e.0: transparent bridge
[ 0.213596] pci_bus 0000:00: on NUMA node 0
[ 0.213610] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.213906] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.214028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.214216] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.237185] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.237414] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.237638] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.237862] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.238088] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.238310] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.238537] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.238762] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.238975] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.238995] vgaarb: loaded
[ 0.239085] PCI: Using ACPI for IRQ routing
[ 0.239085] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.239085] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.244030] Switching to clocksource tsc
[ 0.246254] pnp: PnP ACPI init
[ 0.246295] ACPI: bus type pnp registered
[ 0.250264] pnp: PnP ACPI: found 13 devices
[ 0.250271] ACPI: ACPI bus type pnp unregistered
[ 0.250279] PnPBIOS: Disabled by ACPI PNP
[ 0.250305] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 0.250323] system 00:08: ioport range 0x25c-0x25f has been reserved
[ 0.250331] system 00:08: ioport range 0x380-0x383 has been reserved
[ 0.250338] system 00:08: ioport range 0x400-0x41f has been reserved
[ 0.250345] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.250352] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.250359] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.250367] system 00:08: iomem range 0x8c000000-0x8c01ffff has been reserved
[ 0.250375] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.250382] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.250390] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.250397] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.250405] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.250419] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.250426] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.250438] system 00:0b: iomem range 0xe0000000-0xe3ffffff has been reserved
[ 0.250451] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.250458] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 0.250465] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.250472] system 00:0c: iomem range 0x100000-0x3f7fffff could not be reserved
[ 0.285559] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[ 0.285568] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.285579] pci 0000:00:1c.0: MEM window: 0x40000000-0x401fffff
[ 0.285589] pci 0000:00:1c.0: PREFETCH window: 0x00000040200000-0x000000403fffff
[ 0.285601] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.285608] pci 0000:00:1c.1: IO window: 0xe000-0xefff
[ 0.285618] pci 0000:00:1c.1: MEM window: 0xfbf00000-0xfbffffff
[ 0.285627] pci 0000:00:1c.1: PREFETCH window: 0x00000040400000-0x000000405fffff
[ 0.285640] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:01
[ 0.285647] pci 0000:00:1c.2: IO window: 0x2000-0x2fff
[ 0.285657] pci 0000:00:1c.2: MEM window: 0xfbe00000-0xfbefffff
[ 0.285665] pci 0000:00:1c.2: PREFETCH window: 0x00000040600000-0x000000407fffff
[ 0.285678] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.285682] pci 0000:00:1e.0: IO window: disabled
[ 0.285691] pci 0000:00:1e.0: MEM window: disabled
[ 0.285699] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.285722] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.285740] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.285750] pci 0000:00:1c.0: setting latency timer to 64
[ 0.285769] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.285778] pci 0000:00:1c.1: setting latency timer to 64
[ 0.285793] pci 0000:00:1c.2: enabling device (0106 -> 0107)
[ 0.285803] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.285812] pci 0000:00:1c.2: setting latency timer to 64
[ 0.285825] pci 0000:00:1e.0: setting latency timer to 64
[ 0.285834] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.285841] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.285847] pci_bus 0000:03: resource 0 io: [0x1000-0x1fff]
[ 0.285853] pci_bus 0000:03: resource 1 mem: [0x40000000-0x401fffff]
[ 0.285860] pci_bus 0000:03: resource 2 pref mem [0x40200000-0x403fffff]
[ 0.285866] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
[ 0.285872] pci_bus 0000:02: resource 1 mem: [0xfbf00000-0xfbffffff]
[ 0.285879] pci_bus 0000:02: resource 2 pref mem [0x40400000-0x405fffff]
[ 0.285885] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
[ 0.285891] pci_bus 0000:01: resource 1 mem: [0xfbe00000-0xfbefffff]
[ 0.285897] pci_bus 0000:01: resource 2 pref mem [0x40600000-0x407fffff]
[ 0.285904] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.285910] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[ 0.285979] NET: Registered protocol family 2
[ 0.286166] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.286812] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.287835] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.288331] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.288339] TCP reno registered
[ 0.288562] NET: Registered protocol family 1
[ 0.288607] pci 0000:00:02.0: Boot video device
[ 0.288850] Unpacking initramfs...
[ 0.387152] Freeing initrd memory: 2216k freed
[ 0.390080] audit: initializing netlink socket (disabled)
[ 0.390104] type=2000 audit(1276594456.387:1): initialized
[ 0.390435] highmem bounce pool size: 64 pages
[ 0.390446] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.393717] VFS: Disk quotas dquot_6.5.2
[ 0.393841] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.393995] msgmni has been set to 1739
[ 0.394406] alg: No test for stdrng (krng)
[ 0.394528] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.394536] io scheduler noop registered
[ 0.394541] io scheduler anticipatory registered
[ 0.394545] io scheduler deadline registered
[ 0.394628] io scheduler cfq registered (default)
[ 0.394858] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.394875] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.395113] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.395129] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.395351] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.395366] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.395722] isapnp: Scanning for PnP cards...
[ 0.749451] isapnp: No Plug & Play device found
[ 0.752738] Linux agpgart interface v0.103
[ 0.752885] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 0.753099] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 0.755756] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.755903] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.756644] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.782078] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.782095] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.782258] mice: PS/2 mouse device common for all mice
[ 0.782340] rtc_cmos 00:03: RTC can wake from S4
[ 0.782440] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.782488] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.782523] cpuidle: using governor ladder
[ 0.782529] cpuidle: using governor menu
[ 0.782540] No iBFT detected.
[ 0.783567] TCP cubic registered
[ 0.783959] NET: Registered protocol family 10
[ 0.784940] lo: Disabled Privacy Extensions
[ 0.785643] Mobile IPv6
[ 0.785649] NET: Registered protocol family 17
[ 0.785682] Using IPI No-Shortcut mode
[ 0.785853] PM: Resume from disk failed.
[ 0.785865] registered taskstats version 1
[ 0.786433] rtc_cmos 00:03: setting system clock to 2010-06-15 09:34:17 UTC (1276594457)
[ 0.786501] Initalizing network drop monitor service
[ 0.786559] Freeing unused kernel memory: 372k freed
[ 0.786881] Write protecting the kernel text: 2492k
[ 0.786922] Write protecting the kernel read-only data: 916k
[ 0.808482] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.921423] udev: starting version 157
[ 1.038162] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 1.047205] ACPI: Lid Switch [LID]
[ 1.047444] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 1.047462] ACPI: Sleep Button [SLPB]
[ 1.047669] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 1.047682] ACPI: Power Button [PWRB]
[ 1.047891] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.047905] ACPI: Power Button [PWRF]
[ 1.233101] SCSI subsystem initialized
[ 1.283627] acpi device:1e: registered as cooling_device0
[ 1.283999] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 1.284020] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.292054] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.292082] ACPI: Thermal Zone [TZ00] (57 C)
[ 1.318327] libata version 3.00 loaded.
[ 1.345245] ata_piix 0000:00:1f.2: version 2.13
[ 1.345290] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.345303] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.345391] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.345549] scsi0 : ata_piix
[ 1.346011] scsi1 : ata_piix
[ 1.350195] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.350206] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.392959] [drm] Initialized drm 1.1.0 20060810
[ 1.516746] ata1.00: ATA-8: ST9160310AS, 0303, max UDMA/133
[ 1.516754] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.532727] ata1.00: configured for UDMA/133
[ 1.532926] scsi 0:0:0:0: Direct-Access ATA ST9160310AS 0303 PQ: 0 ANSI: 5
[ 1.614718] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.614732] i915 0000:00:02.0: setting latency timer to 64
[ 1.626855] [drm] set up 7M of stolen space
[ 1.632019] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.632198] sd 0:0:0:0: [sda] Write Protect is off
[ 1.632207] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.632283] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.632702] sda:
[ 1.730127] composite sync not supported
[ 1.730455] [drm] initialized overlay support
[ 1.895185] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 1.977876] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.150690] [drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 12
[ 2.150765] [drm:edid_is_valid] *ERROR* Raw EDID:
[ 2.150828] <3>00 ff ff ff ff ff ff 00 22 64 e9 03 6f 0a 00 00 ........"d..o...
[ 2.150835] <3>2e 12 01 03 80 16 0d 78 0a 86 26 94 57 51 90 27 .......x..&.WQ.'
[ 2.150840] <3>21 4f 54 00 00 00 01 01 01 01 01 01 01 01 01 01 !OT.............
[ 2.150846] <3>01 01 01 01 01 01 94 11 00 b0 40 58 19 20 35 23 ..........@X. 5#
[ 2.150852] <3>45 00 dc 81 00 00 00 19 16 14 00 d8 40 58 26 20 E...........@X&
[ 2.150858] <3>5d 23 15 04 dc 81 00 00 00 00 00 00 00 fe 00 00 ]#..............
[ 2.150863] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe ................
[ 2.150869] <3>00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 3f ...............?
[ 2.150873]
[ 2.252580] [drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 191
[ 2.252656] [drm:edid_is_valid] *ERROR* Raw EDID:
[ 2.252719] <3>00 ff ff ff ff ff ff 00 22 ff e9 ff 6f ff 00 ff ........"...o...
[ 2.252726] <3>2e ff 01 ff 80 00 00 00 00 00 00 00 00 00 00 00 ................
[ 2.252731] <3>00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 2.252737] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 2.252743] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 2.252748] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 2.252754] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 2.252759] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 2.252763]
[ 2.416203] Console: switching to colour frame buffer device 128x37
[ 2.424601] fb0: inteldrmfb frame buffer device
[ 2.424606] registered panic notifier
[ 2.424623] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.701370] PM: Starting manual resume from disk
[ 2.701378] PM: Resume from partition 8:5
[ 2.701382] PM: Checking hibernation image.
[ 2.701770] PM: Error -22 checking image file
[ 2.701774] PM: Resume from disk failed.
[ 2.777357] kjournald starting. Commit interval 5 seconds
[ 2.777371] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.185417] udev: starting version 157
[ 18.595853] ACPI: SSDT 3f7ae180 0023C (v01 PmRef Cpu0Ist 00003000 INTL 20060113)
[ 18.597190] ACPI: SSDT 3f7ae450 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20060113)
[ 18.644070] Monitor-Mwait will be used to enter C-1 state
[ 18.656071] Monitor-Mwait will be used to enter C-2 state
[ 18.688228] Marking TSC unstable due to TSC halts in idle
[ 18.688452] processor LNXCPU:00: registered as cooling_device1
[ 18.689410] ACPI: SSDT 3f7ae0b0 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20060113)
[ 18.690212] ACPI: SSDT 3f7ae3c0 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20060113)
[ 18.703817] Switching to clocksource hpet
[ 18.706859] processor LNXCPU:01: registered as cooling_device2
[ 18.710308] usbcore: registered new interface driver usbfs
[ 18.711060] usbcore: registered new interface driver hub
[ 18.714368] usbcore: registered new device driver usb
[ 18.732302] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 18.732328] ATL1E 0000:02:00.0: setting latency timer to 64
[ 18.744396] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 18.744475] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 18.744521] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 18.744531] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 18.744587] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 18.744710] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 18.744733] ehci_hcd 0000:00:1d.7: debug port 1
[ 18.748652] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 18.749096] ACPI: AC Adapter [AC0] (on-line)
[ 18.771703] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbcb7c00
[ 18.773569] ACPI: Battery Slot [BAT0] (battery absent)
[ 18.789092] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 18.789158] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 18.789168] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 18.789177] usb usb1: Product: EHCI Host Controller
[ 18.789184] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 18.789191] usb usb1: SerialNumber: 0000:00:1d.7
[ 18.789427] usb usb1: configuration #1 chosen from 1 choice
[ 18.789522] hub 1-0:1.0: USB hub found
[ 18.789545] hub 1-0:1.0: 8 ports detected
[ 18.837582] cfg80211: Using static regulatory domain info
[ 18.837590] cfg80211: Regulatory domain: US
[ 18.837596] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 18.837606] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 18.837615] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 18.837624] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 18.837634] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 18.837643] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 18.837652] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 18.838388] cfg80211: Calling CRDA for country: US
[ 18.858918] uhci_hcd: USB Universal Host Controller Interface driver
[ 18.859033] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 18.859052] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 18.859062] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 18.859096] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 18.859145] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d480
[ 18.859252] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 18.859262] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 18.859270] usb usb2: Product: UHCI Host Controller
[ 18.859277] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 18.859284] usb usb2: SerialNumber: 0000:00:1d.0
[ 18.862105] usb usb2: configuration #1 chosen from 1 choice
[ 18.862352] hub 2-0:1.0: USB hub found
[ 18.862378] hub 2-0:1.0: 2 ports detected
[ 18.862536] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 18.862556] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 18.862566] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 18.862596] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 18.862660] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000d800
[ 18.862761] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 18.862770] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 18.862778] usb usb3: Product: UHCI Host Controller
[ 18.862785] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 18.862792] usb usb3: SerialNumber: 0000:00:1d.1
[ 18.864868] usb usb3: configuration #1 chosen from 1 choice
[ 18.865190] hub 3-0:1.0: USB hub found
[ 18.865217] hub 3-0:1.0: 2 ports detected
[ 18.865379] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 18.865398] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 18.865408] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 18.865434] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 18.865498] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000d880
[ 18.865600] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 18.865609] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 18.865617] usb usb4: Product: UHCI Host Controller
[ 18.865624] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 18.865631] usb usb4: SerialNumber: 0000:00:1d.2
[ 18.865998] usb usb4: configuration #1 chosen from 1 choice
[ 18.866204] hub 4-0:1.0: USB hub found
[ 18.866228] hub 4-0:1.0: 2 ports detected
[ 18.866372] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 18.866391] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 18.866400] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 18.866425] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 18.866486] uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000dc00
[ 18.866585] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 18.866595] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 18.866603] usb usb5: Product: UHCI Host Controller
[ 18.866610] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 18.866617] usb usb5: SerialNumber: 0000:00:1d.3
[ 18.872059] usb usb5: configuration #1 chosen from 1 choice
[ 18.872699] hub 5-0:1.0: USB hub found
[ 18.872729] hub 5-0:1.0: 2 ports detected
[ 18.907076] intel_rng: FWH not detected
[ 18.938559] ath9k 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 18.938583] ath9k 0000:01:00.0: setting latency timer to 64
[ 19.375326] ath: EEPROM regdomain: 0x60
[ 19.375333] ath: EEPROM indicates we should expect a direct regpair map
[ 19.375342] ath: Country alpha2 being used: 00
[ 19.375347] ath: Regpair used: 0x60
[ 19.428756] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 19.431059] Registered led device: ath9k-phy0::radio
[ 19.431134] Registered led device: ath9k-phy0::assoc
[ 19.431192] Registered led device: ath9k-phy0::tx
[ 19.431251] Registered led device: ath9k-phy0::rx
[ 19.431927] phy0: Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0: mem=0xf8780000, irq=18
[ 19.552082] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 19.665587] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 19.665661] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 19.686772] usb 1-4: New USB device found, idVendor=050d, idProduct=0307
[ 19.686785] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 19.687032] usb 1-4: configuration #1 chosen from 1 choice
[ 19.687334] hub 1-4:1.0: USB hub found
[ 19.687513] hub 1-4:1.0: 7 ports detected
[ 19.739615] elantech.c: assuming hardware version 2, firmware version 2.48
[ 19.761675] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 19.805114] usb 1-8: new high speed USB device using ehci_hcd and address 4
[ 19.822137] elantech.c: Synaptics capabilities query result 0x00, 0x02, 0x64.
[ 20.038576] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
[ 20.085187] usb 1-8: New USB device found, idVendor=05e3, idProduct=0505
[ 20.085203] usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 20.085215] usb 1-8: Product: USB 2.0 Camera
[ 20.085469] usb 1-8: configuration #1 chosen from 1 choice
[ 20.145841] Linux video capture interface: v2.00
[ 20.154843] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (05e3:0505)
[ 20.293704] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input8
[ 20.293872] usbcore: registered new interface driver uvcvideo
[ 20.293883] USB Video Class driver (v0.1.0)
[ 20.340089] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 20.593783] usb 3-1: New USB device found, idVendor=1e54, idProduct=2030
[ 20.593799] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 20.593812] usb 3-1: Product: USB Keyboard
[ 20.593821] usb 3-1: Manufacturer: TypeMatrix.com
[ 20.594114] usb 3-1: configuration #1 chosen from 1 choice
[ 20.648490] usbcore: registered new interface driver hiddev
[ 20.685522] input: TypeMatrix.com USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input9
[ 20.685713] generic-usb 0003:1E54:2030.0001: input,hidraw0: USB HID v1.10 Keyboard [TypeMatrix.com USB Keyboard] on usb-0000:00:1d.1-1/input0
[ 20.686341] usb 1-4.6: new low speed USB device using ehci_hcd and address 5
[ 20.756730] input: TypeMatrix.com USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input10
[ 20.757478] generic-usb 0003:1E54:2030.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [TypeMatrix.com USB Keyboard] on usb-0000:00:1d.1-1/input1
[ 20.757546] usbcore: registered new interface driver usbhid
[ 20.757556] usbhid: v2.6:USB HID core driver
[ 20.781289] usb 1-4.6: New USB device found, idVendor=047d, idProduct=1020
[ 20.781306] usb 1-4.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 20.781318] usb 1-4.6: Product: Kensington Expert Mouse
[ 20.781328] usb 1-4.6: Manufacturer: Kensington
[ 20.781532] usb 1-4.6: configuration #1 chosen from 1 choice
[ 20.786650] input: Kensington Kensington Expert Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.6/1-4.6:1.0/input/input11
[ 20.787332] generic-usb 0003:047D:1020.0003: input,hidraw2: USB HID v1.10 Mouse [Kensington Kensington Expert Mouse] on usb-0000:00:1d.7-4.6/input0
[ 21.325262] Adding 2096440k swap on /dev/sda5. Priority:-1 extents:1 across:2096440k
[ 21.389092] EXT3 FS on sda8, internal journal
[ 21.460147] loop: module loaded
[ 22.083261] kjournald starting. Commit interval 5 seconds
[ 22.083876] EXT3 FS on sda7, internal journal
[ 22.083894] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.815389] RPC: Registered udp transport module.
[ 22.815395] RPC: Registered tcp transport module.
[ 22.815400] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 22.845042] Slow work thread pool: Starting up
[ 22.845183] Slow work thread pool: Ready
[ 22.845342] FS-Cache: Loaded
[ 22.890463] FS-Cache: Netfs 'nfs' registered for caching
[ 22.925552] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 23.054480] fuse init (API version 7.13)
[ 23.807782] svc: failed to register lockdv1 RPC service (errno 97).
[ 23.818102] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 23.823197] NFSD: starting 90-second grace period
[ 23.895882] ATL1E 0000:02:00.0: irq 27 for MSI/MSI-X
[ 23.896155] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 23.896544] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.897071] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 24.524097] Bluetooth: Core ver 2.15
[ 24.529153] NET: Registered protocol family 31
[ 24.529159] Bluetooth: HCI device and connection manager initialized
[ 24.529167] Bluetooth: HCI socket layer initialized
[ 24.587313] Bluetooth: L2CAP ver 2.14
[ 24.587321] Bluetooth: L2CAP socket layer initialized
[ 24.644871] Bluetooth: RFCOMM TTY layer initialized
[ 24.644888] Bluetooth: RFCOMM socket layer initialized
[ 24.644895] Bluetooth: RFCOMM ver 1.11
[ 24.680134] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.680144] Bluetooth: BNEP filters: protocol multicast
[ 24.746525] Bridge firewalling registered
[ 24.801456] lp: driver loaded but no devices found
[ 24.809635] Bluetooth: SCO (Voice Link) ver 0.6
[ 24.809643] Bluetooth: SCO socket layer initialized
[ 24.862663] ppdev: user-space parallel port driver
[ 26.275699] composite sync not supported
[ 26.412659] composite sync not supported
[ 34.372029] eth0: no IPv6 routers present
[ 42.940168] composite sync not supported
[ 43.117011] composite sync not supported
[ 43.252221] composite sync not supported
[ 55.385140] CPU0 attaching NULL sched-domain.
[ 55.385153] CPU1 attaching NULL sched-domain.
[ 55.413166] CPU0 attaching sched-domain:
[ 55.413176] domain 0: span 0-1 level SIBLING
[ 55.413185] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 55.413201] domain 1: span 0-1 level MC
[ 55.413207] groups: 0-1 (cpu_power = 1178)
[ 55.413221] CPU1 attaching sched-domain:
[ 55.413227] domain 0: span 0-1 level SIBLING
[ 55.413234] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 55.413249] domain 1: span 0-1 level MC
[ 55.413255] groups: 0-1 (cpu_power = 1178)
[ 77.410678] composite sync not supported
[ 79.628880] composite sync not supported
[ 105.437055] composite sync not supported
[ 108.508645] composite sync not supported
[ 133.560983] composite sync not supported
[ 151.132879] composite sync not supported
[ 162.136701] composite sync not supported
[ 327.825123] composite sync not supported
[ 336.049082] composite sync not supported
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.14-dsa-ia32 i686 Debian
Current Operating System: Linux prem6s 2.6.32-5-686 #1 SMP Tue Jun 1 04:59:47 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=e295254a-3f31-41d0-91b3-01c982751390 ro quiet init=/sbin/bootchartd
Build Date: 03 June 2010 04:08:50PM
xorg-server 2:1.7.7-2 (Julien Cristau <jcristau@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 15 09:34:42 2010
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81eac60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:27ae:1043:830f Intel Corporation Mobile 945GME Express Integrated Graphics Controller rev 3, Mem @ 0xfbd00000/524288, 0xd0000000/268435456, 0xfbcc0000/262144, I/O @ 0x0000dc80/8
(--) PCI: (0:0:2:1) 8086:27a6:1043:830f Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xfbd80000/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched intel as autoconfigured driver 0
(==) Matched vesa as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
(--) intel(0): Chipset: "945GME"
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
(II) intel(0): EDID for output VGA1
(II) intel(0): Not using default mode "640x350" (vrefresh out of range)
(II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x400" (vrefresh out of range)
(II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "720x400" (vrefresh out of range)
(II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (interlace mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (hsync out of range)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (hsync out of range)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (hsync out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (hsync out of range)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (vrefresh out of range)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (hsync out of range)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (vrefresh out of range)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (hsync out of range)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "832x624" (vrefresh out of range)
(II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (hsync out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (hsync out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1440x900" (hsync out of range)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1024" (hsync out of range)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (hsync out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (hsync out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1080" (hsync out of range)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1200" (hsync out of range)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (hsync out of range)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output VGA1
(II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): EDID for output LVDS1
(II) intel(0): Manufacturer: HSD Model: 3e9 Serial#: 2671
(II) intel(0): Year: 2008 Week: 46
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 22 vert.: 13
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.317 greenY: 0.564
(II) intel(0): blueX: 0.152 blueY: 0.131 whiteX: 0.310 whiteY: 0.330
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 45.0 MHz Image Size: 220 x 129 mm
(II) intel(0): h_active: 1024 h_sync: 1077 h_sync_end 1112 h_blank_end 1200 h_border: 0
(II) intel(0): v_active: 600 v_sync: 604 v_sync_end 609 v_blanking: 625 v_border: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 51.4 MHz Image Size: 220 x 129 mm
(II) intel(0): h_active: 1024 h_sync: 1117 h_sync_end 1152 h_blank_end 1240 h_border: 0
(II) intel(0): v_active: 600 v_sync: 617 v_sync_end 622 v_blanking: 638 v_border: 0
(II) intel(0):
(II) intel(0):
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff002264e9036f0a0000
(II) intel(0): 2e12010380160d780a86269457519027
(II) intel(0): 214f5400000001010101010101010101
(II) intel(0): 010101010101941100b0405819203523
(II) intel(0): 4500dc8100000019161400d840582620
(II) intel(0): 5d231504dc8100000000000000fe0000
(II) intel(0): 000000000000000000000000000000fe
(II) intel(0): 00000000000000000001000000000033
(II) intel(0): Not using default mode "640x350" (vrefresh out of range)
(II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x400" (vrefresh out of range)
(II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "720x400" (vrefresh out of range)
(II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (interlace mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (hsync out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (hsync out of range)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (hsync out of range)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (hsync out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (hsync out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (hsync out of range)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (vrefresh out of range)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (hsync out of range)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (vrefresh out of range)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (hsync out of range)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "832x624" (vrefresh out of range)
(II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (hsync out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (hsync out of range)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (hsync out of range)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (hsync out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1440x900" (hsync out of range)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1024" (hsync out of range)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (hsync out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (hsync out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1080" (hsync out of range)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1200" (hsync out of range)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (hsync out of range)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline "1024x600"x60.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "1024x600"x65.0 51.42 1024 1117 1152 1240 600 601 606 638 -hsync -vsync (41.5 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Output VGA1 connected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Using fuzzy aspect match for initial modes
(II) intel(0): Output VGA1 using initial mode 800x600
(II) intel(0): Output LVDS1 using initial mode 800x600
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Kernel mode setting active, disabling FBC.
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 211 x 158
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "bepo"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device Video Bus (/dev/input/event5)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "bepo"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "bepo"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device Lid Switch (/dev/input/event1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Sleep Button (/dev/input/event2)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event2"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "bepo"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device TypeMatrix.com USB Keyboard (/dev/input/event9)
(**) TypeMatrix.com USB Keyboard: Applying InputClass "evdev keyboard catchall"
(**) TypeMatrix.com USB Keyboard: always reports core events
(**) TypeMatrix.com USB Keyboard: Device: "/dev/input/event9"
(II) TypeMatrix.com USB Keyboard: Found keys
(II) TypeMatrix.com USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "TypeMatrix.com USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "bepo"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device TypeMatrix.com USB Keyboard (/dev/input/event10)
(**) TypeMatrix.com USB Keyboard: Applying InputClass "evdev keyboard catchall"
(**) TypeMatrix.com USB Keyboard: always reports core events
(**) TypeMatrix.com USB Keyboard: Device: "/dev/input/event10"
(II) TypeMatrix.com USB Keyboard: Found 1 mouse buttons
(II) TypeMatrix.com USB Keyboard: Found scroll wheel(s)
(II) TypeMatrix.com USB Keyboard: Found relative axes
(II) TypeMatrix.com USB Keyboard: Found absolute axes
(II) TypeMatrix.com USB Keyboard: Found keys
(II) TypeMatrix.com USB Keyboard: Configuring as mouse
(II) TypeMatrix.com USB Keyboard: Configuring as keyboard
(**) TypeMatrix.com USB Keyboard: YAxisMapping: buttons 4 and 5
(**) TypeMatrix.com USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TypeMatrix.com USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "bepo"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(EE) TypeMatrix.com USB Keyboard: failed to initialize for relative axes.
(II) TypeMatrix.com USB Keyboard: initialized for absolute axes.
(II) config/udev: Adding input device Kensington Kensington Expert Mouse (/dev/input/event11)
(**) Kensington Kensington Expert Mouse: Applying InputClass "evdev pointer catchall"
(**) Kensington Kensington Expert Mouse: always reports core events
(**) Kensington Kensington Expert Mouse: Device: "/dev/input/event11"
(II) Kensington Kensington Expert Mouse: Found 8 mouse buttons
(II) Kensington Kensington Expert Mouse: Found scroll wheel(s)
(II) Kensington Kensington Expert Mouse: Found relative axes
(II) Kensington Kensington Expert Mouse: Found x and y relative axes
(II) Kensington Kensington Expert Mouse: Configuring as mouse
(**) Kensington Kensington Expert Mouse: YAxisMapping: buttons 4 and 5
(**) Kensington Kensington Expert Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Kensington Kensington Expert Mouse" (type: MOUSE)
(II) Kensington Kensington Expert Mouse: initialized for relative axes.
(II) config/udev: Adding input device Kensington Kensington Expert Mouse (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event8)
(**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
(**) USB 2.0 Camera: always reports core events
(**) USB 2.0 Camera: Device: "/dev/input/event8"
(II) USB 2.0 Camera: Found keys
(II) USB 2.0 Camera: Configuring as keyboard
(II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "bepo"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "bepo"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
(**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev pointer catchall"
(**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
(**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.2
(**) Option "Device" "/dev/input/event7"
(II) ETPS/2 Elantech Touchpad: x-axis range 8 - 1144
(II) ETPS/2 Elantech Touchpad: y-axis range 8 - 760
(II) ETPS/2 Elantech Touchpad: device does not report pressure, will use touch data.
(II) ETPS/2 Elantech Touchpad: finger width range 0 - 0
(II) ETPS/2 Elantech Touchpad: buttons: left right middle double triple
(--) ETPS/2 Elantech Touchpad: touchpad found
(**) ETPS/2 Elantech Touchpad: always reports core events
(II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD)
(**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
(**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 0
(**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
(**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
(--) ETPS/2 Elantech Touchpad: touchpad found
(II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
(**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
(II) Synaptics touchpad driver version 1.2.2
ETPS/2 Elantech Touchpad no synaptics event device found
(**) Option "Device" "/dev/input/mouse0"
Query no Synaptics: 6003C8
(--) ETPS/2 Elantech Touchpad: no supported touchpad found
(EE) ETPS/2 Elantech Touchpad Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "ETPS/2 Elantech Touchpad"
(II) UnloadModule: "synaptics"
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): Allocate new frame buffer 1824x600 stride 2048
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): Allocate new frame buffer 1360x768 stride 2048
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): Allocate new frame buffer 2384x768 stride 4096
(II) intel(0): Allocate new frame buffer 1360x768 stride 2048
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): Allocate new frame buffer 2384x768 stride 4096
(II) intel(0): Allocate new frame buffer 1360x768 stride 2048
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): Allocate new frame buffer 2384x768 stride 4096
(II) intel(0): Allocate new frame buffer 1360x768 stride 2048
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): Allocate new frame buffer 2384x768 stride 4096
(II) intel(0): Allocate new frame buffer 1360x768 stride 2048
Reply to: