Bug#585625: Switch to i915/KMS lefts console unusable
Package: linux-2.6
Version: 2.6.32-15
Severity: important
I tried to switch to inteldrmfb aka KMS with the following commands:
| rmmod i915
| modprobe i915 modeset=1
After that, the console was black, without even a cursor. The same also
seems to happen if it is loaded with this setting on startup. The only
way to recover the console is to start the xserver and switch back.
Last known working version in 2.6.32-9.
Bastian
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-15) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 04:34:03 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/vg0_bushhammer-testxen_root ro
** Not tainted
** Kernel log:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-15) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 04:34:03 UTC 2010
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/vg0_bushhammer-testxen_root ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f7b0000 (usable)
[ 0.000000] BIOS-e820: 000000007f7b0000 - 000000007f7c5400 (reserved)
[ 0.000000] BIOS-e820: 000000007f7c5400 - 000000007f7e7fb8 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f7e7fb8 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x7f7b0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 2 base 0FEDA0000 mask FFFFE0000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007f7b0000
[ 0.000000] 0000000000 - 007f600000 page 2M
[ 0.000000] 007f600000 - 007f7b0000 page 4k
[ 0.000000] kernel direct mapping tables up to 7f7b0000 @ 8000-c000
[ 0.000000] RAMDISK: 37698000 - 37fef440
[ 0.000000] ACPI: RSDP 00000000000f77a0 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 000000007f7c81c4 00074 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 0.000000] ACPI: FACP 000000007f7c8084 000F4 (v04 HP 30BE 00000003 HP 00000001)
[ 0.000000] ACPI: DSDT 000000007f7c84c0 12EA7 (v01 HP nc65xx 00010000 MSFT 03000001)
[ 0.000000] ACPI: FACS 000000007f7e7d80 00040
[ 0.000000] ACPI: SLIC 000000007f7c8238 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 0.000000] ACPI: HPET 000000007f7c83b0 00038 (v01 HP 30BE 00000001 HP 00000001)
[ 0.000000] ACPI: APIC 000000007f7c83e8 00068 (v01 HP 30BE 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 000000007f7c8450 0003C (v01 HP 30BE 00000001 HP 00000001)
[ 0.000000] ACPI: TCPA 000000007f7c848c 00032 (v02 HP 30BE 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 000000007f7db367 0032F (v01 HP HPQSAT 00000001 MSFT 03000001)
[ 0.000000] ACPI: SSDT 000000007f7dbf1c 0025F (v01 HP Cpu0Tst 00003000 INTL 20060317)
[ 0.000000] ACPI: SSDT 000000007f7dc17b 000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317)
[ 0.000000] ACPI: SSDT 000000007f7dc221 004D7 (v01 HP CpuPm 00003000 INTL 20060317)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007f7b0000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007f7b0000
[ 0.000000] NODE_DATA [000000000000a000 - 0000000000011fff]
[ 0.000000] bootmap [0000000000012000 - 0000000000021ef7] pages 10
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007f7b0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001680314] TEXT DATA BSS ==> [0001000000 - 0001680314]
[ 0.000000] #3 [0037698000 - 0037fef440] RAMDISK ==> [0037698000 - 0037fef440]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [0001681000 - 000168118c] BRK ==> [0001681000 - 000168118c]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001c00000-ffff8800037fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f7b0
[ 0.000000] On node 0 totalpages: 522063
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 101 pages reserved
[ 0.000000] DMA zone: 3842 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7083 pages used for memmap
[ 0.000000] DMA32 zone: 510981 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880001800000 s90008 r8192 d20584 u1048576
[ 0.000000] pcpu-alloc: s90008 r8192 d20584 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 514823
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/vg0_bushhammer-testxen_root ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2042788k/2088640k available (3060k kernel code, 388k absent, 45464k reserved, 1885k data, 584k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1995.014 MHz processor.
[ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.02 BogoMIPS (lpj=7980056)
[ 0.004157] Security Framework initialized
[ 0.004220] SELinux: Disabled at boot.
[ 0.004462] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.005711] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.006352] Mount-cache hash table entries: 256
[ 0.006559] Initializing cgroup subsys ns
[ 0.006621] Initializing cgroup subsys cpuacct
[ 0.006682] Initializing cgroup subsys devices
[ 0.006745] Initializing cgroup subsys freezer
[ 0.006809] Initializing cgroup subsys net_cls
[ 0.006892] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.006994] CPU: L2 cache: 4096K
[ 0.007053] CPU 0/0x0 -> Node 0
[ 0.007111] CPU: Physical Processor ID: 0
[ 0.007171] CPU: Processor Core ID: 0
[ 0.007231] mce: CPU supports 6 MCE banks
[ 0.007296] CPU0: Thermal monitoring handled by SMI
[ 0.007300] using mwait in idle threads.
[ 0.007358] Performance Events: Core2 events, Intel PMU driver.
[ 0.007509] ... version: 2
[ 0.007573] ... bit width: 40
[ 0.007631] ... generic registers: 2
[ 0.008013] ... value mask: 000000ffffffffff
[ 0.008073] ... max period: 000000007fffffff
[ 0.008135] ... fixed-purpose events: 3
[ 0.008195] ... event mask: 0000000700000003
[ 0.009176] ACPI: Core revision 20090903
[ 0.032076] Setting APIC routing to flat
[ 0.032523] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.073637] CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
[ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 4096K
[ 0.008000] CPU 1/0x1 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring handled by SMI
[ 0.160042] CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
[ 0.160549] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.164016] Brought up 2 CPUs
[ 0.164081] Total of 2 processors activated (7980.01 BogoMIPS).
[ 0.164774] CPU0 attaching sched-domain:
[ 0.164778] domain 0: span 0-1 level MC
[ 0.164780] groups: 0 1
[ 0.164787] CPU1 attaching sched-domain:
[ 0.164789] domain 0: span 0-1 level MC
[ 0.164792] groups: 1 0
[ 0.164877] devtmpfs: initialized
[ 0.169048] regulator: core version 0.5
[ 0.169048] NET: Registered protocol family 16
[ 0.169048] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.169048] ACPI: bus type pci registered
[ 0.169048] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.169048] PCI: Not using MMCONFIG.
[ 0.169048] PCI: Using configuration type 1 for base access
[ 0.169048] bio: create slab <bio-0> at 0
[ 0.169048] ACPI: EC: Look up EC in DSDT
[ 0.236107] ACPI: Interpreter enabled
[ 0.236169] ACPI: (supports S0 S3 S4 S5)
[ 0.236425] ACPI: Using IOAPIC for interrupt routing
[ 0.236544] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.245893] PCI: MCFG area at f8000000 reserved in ACPI motherboard resources
[ 0.247540] PCI: Using MMCONFIG at f8000000 - fbffffff
[ 0.260104] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.260380] ACPI: Power Resource [C27A] (on)
[ 0.260614] ACPI: Power Resource [C281] (on)
[ 0.260719] ACPI: Power Resource [C29D] (on)
[ 0.260833] ACPI: Power Resource [C1C5] (off)
[ 0.260995] ACPI: Power Resource [C3B5] (off)
[ 0.261156] ACPI: Power Resource [C3B6] (off)
[ 0.261317] ACPI: Power Resource [C3B7] (off)
[ 0.261472] ACPI: Power Resource [C3B8] (off)
[ 0.261626] ACPI: Power Resource [C3B9] (off)
[ 0.262039] ACPI: No dock devices found.
[ 0.267069] ACPI: PCI Root Bridge [C003] (0000:00)
[ 0.267221] pci 0000:00:02.0: reg 10 64bit mmio: [0xe4400000-0xe44fffff]
[ 0.267228] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.267233] pci 0000:00:02.0: reg 20 io port: [0x4000-0x4007]
[ 0.267272] pci 0000:00:02.1: reg 10 64bit mmio: [0xe4500000-0xe45fffff]
[ 0.267453] pci 0000:00:19.0: reg 10 32bit mmio: [0xe4600000-0xe461ffff]
[ 0.267468] pci 0000:00:19.0: reg 14 32bit mmio: [0xe4620000-0xe4620fff]
[ 0.267485] pci 0000:00:19.0: reg 18 io port: [0x4020-0x403f]
[ 0.267569] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.267636] pci 0000:00:19.0: PME# disabled
[ 0.267795] pci 0000:00:1a.0: reg 20 io port: [0x4040-0x405f]
[ 0.267925] pci 0000:00:1a.1: reg 20 io port: [0x4060-0x407f]
[ 0.268079] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe4621000-0xe46213ff]
[ 0.268188] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.268257] pci 0000:00:1a.7: PME# disabled
[ 0.270182] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe4624000-0xe4627fff]
[ 0.270258] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.270327] pci 0000:00:1b.0: PME# disabled
[ 0.270501] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.270570] pci 0000:00:1c.0: PME# disabled
[ 0.270765] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.270833] pci 0000:00:1c.1: PME# disabled
[ 0.271031] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.271099] pci 0000:00:1c.4: PME# disabled
[ 0.271272] pci 0000:00:1d.0: reg 20 io port: [0x4080-0x409f]
[ 0.271405] pci 0000:00:1d.1: reg 20 io port: [0x40a0-0x40bf]
[ 0.271525] pci 0000:00:1d.2: reg 20 io port: [0x40c0-0x40df]
[ 0.271658] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe4628000-0xe46283ff]
[ 0.271765] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.271834] pci 0000:00:1d.7: PME# disabled
[ 0.272139] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.272217] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO
[ 0.272284] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
[ 0.272368] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0100 (mask 000f)
[ 0.272447] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007)
[ 0.272605] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.272618] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.272631] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.272646] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.272659] pci 0000:00:1f.1: reg 20 io port: [0x40e0-0x40ef]
[ 0.272771] pci 0000:00:1f.2: reg 10 io port: [0x13f0-0x13f7]
[ 0.272787] pci 0000:00:1f.2: reg 14 io port: [0x15f4-0x15f7]
[ 0.272802] pci 0000:00:1f.2: reg 18 io port: [0x1370-0x1377]
[ 0.272818] pci 0000:00:1f.2: reg 1c io port: [0x1574-0x1577]
[ 0.272835] pci 0000:00:1f.2: reg 20 io port: [0x4120-0x413f]
[ 0.272845] pci 0000:00:1f.2: reg 24 32bit mmio: [0xe4629000-0xe46297ff]
[ 0.272891] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.272959] pci 0000:00:1f.2: PME# disabled
[ 0.273316] pci 0000:10:00.0: reg 10 64bit mmio: [0xe4000000-0xe4001fff]
[ 0.273442] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
[ 0.273530] pci 0000:10:00.0: PME# disabled
[ 0.273780] pci 0000:00:1c.1: bridge 32bit mmio: [0xe4000000-0xe40fffff]
[ 0.273920] pci 0000:00:1c.4: bridge io port: [0x2000-0x3fff]
[ 0.273927] pci 0000:00:1c.4: bridge 32bit mmio: [0xe0000000-0xe3ffffff]
[ 0.274034] pci 0000:02:06.0: reg 10 32bit mmio: [0xe4100000-0xe4100fff]
[ 0.274078] pci 0000:02:06.0: supports D1 D2
[ 0.274080] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.274154] pci 0000:02:06.0: PME# disabled
[ 0.274288] pci 0000:02:06.1: reg 10 32bit mmio: [0xe4101000-0xe4101fff]
[ 0.274334] pci 0000:02:06.1: supports D1 D2
[ 0.274336] pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.274404] pci 0000:02:06.1: PME# disabled
[ 0.274540] pci 0000:02:06.2: reg 10 32bit mmio: [0xe4102000-0xe41027ff]
[ 0.274646] pci 0000:02:06.2: supports D1 D2
[ 0.274648] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.274715] pci 0000:02:06.2: PME# disabled
[ 0.274861] pci 0000:02:06.3: reg 10 32bit mmio: [0xe4103000-0xe41030ff]
[ 0.274967] pci 0000:02:06.3: supports D1 D2
[ 0.274969] pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.275036] pci 0000:02:06.3: PME# disabled
[ 0.275172] pci 0000:02:06.4: reg 10 32bit mmio: [0xe4104000-0xe41040ff]
[ 0.275280] pci 0000:02:06.4: supports D1 D2
[ 0.275282] pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.275365] pci 0000:02:06.4: PME# disabled
[ 0.275548] pci 0000:00:1e.0: transparent bridge
[ 0.275617] pci 0000:00:1e.0: bridge 32bit mmio: [0xe4100000-0xe43fffff]
[ 0.275750] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
[ 0.276037] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B0._PRT]
[ 0.276178] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11D._PRT]
[ 0.276258] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C131._PRT]
[ 0.276344] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT]
[ 0.323105] ACPI: PCI Interrupt Link [C12D] (IRQs *10 11)
[ 0.323565] ACPI: PCI Interrupt Link [C12E] (IRQs *10 11)
[ 0.324020] ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11)
[ 0.324471] ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *5
[ 0.324963] ACPI: PCI Interrupt Link [C140] (IRQs *10 11)
[ 0.325417] ACPI: PCI Interrupt Link [C141] (IRQs 10 11) *5
[ 0.325932] ACPI: PCI Interrupt Link [C142] (IRQs 10 *11)
[ 0.326274] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20090903/pci_link-184)
[ 0.326596] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.326684] vgaarb: loaded
[ 0.326770] PCI: Using ACPI for IRQ routing
[ 0.326770] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.326770] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.332020] Switching to clocksource tsc
[ 0.333257] pnp: PnP ACPI init
[ 0.333322] ACPI: bus type pnp registered
[ 0.343321] alloc irq_desc for 23 on node 0
[ 0.343324] alloc kstat_irqs on node 0
[ 0.345212] pnp: PnP ACPI: found 16 devices
[ 0.345281] ACPI: ACPI bus type pnp unregistered
[ 0.345347] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.345410] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.345474] system 00:00: iomem range 0x100000-0x7f7fffff could not be reserved
[ 0.345554] system 00:0c: ioport range 0x500-0x55f has been reserved
[ 0.345617] system 00:0c: ioport range 0x800-0x80f has been reserved
[ 0.345680] system 00:0c: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.345744] system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.345821] system 00:0e: ioport range 0x4d0-0x4d1 has been reserved
[ 0.345883] system 00:0e: ioport range 0x1000-0x107f has been reserved
[ 0.345946] system 00:0e: ioport range 0x1100-0x113f has been reserved
[ 0.346015] system 00:0e: ioport range 0x1200-0x121f has been reserved
[ 0.346078] system 00:0e: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.346150] system 00:0e: iomem range 0xfec00000-0xfec000ff could not be reserved
[ 0.346223] system 00:0e: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.346287] system 00:0e: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.346351] system 00:0e: iomem range 0xfed90000-0xfed99fff has been reserved
[ 0.346417] system 00:0f: iomem range 0xcee00-0xcffff has been reserved
[ 0.346480] system 00:0f: iomem range 0xd2000-0xd3fff has been reserved
[ 0.346543] system 00:0f: iomem range 0xfeda0000-0xfedbffff has been reserved
[ 0.346606] system 00:0f: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.351457] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
[ 0.351529] pci 0000:00:1c.0: IO window: disabled
[ 0.351606] pci 0000:00:1c.0: MEM window: disabled
[ 0.351672] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.351757] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10
[ 0.351818] pci 0000:00:1c.1: IO window: disabled
[ 0.351885] pci 0000:00:1c.1: MEM window: 0xe4000000-0xe40fffff
[ 0.351954] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.352035] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:28
[ 0.352106] pci 0000:00:1c.4: IO window: 0x2000-0x3fff
[ 0.352176] pci 0000:00:1c.4: MEM window: 0xe0000000-0xe3ffffff
[ 0.352244] pci 0000:00:1c.4: PREFETCH window: 0x00000088000000-0x000000881fffff
[ 0.352333] pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03
[ 0.352395] pci 0000:02:06.0: IO window: 0x005000-0x0050ff
[ 0.352468] pci 0000:02:06.0: IO window: 0x005400-0x0054ff
[ 0.352535] pci 0000:02:06.0: PREFETCH window: 0x80000000-0x83ffffff
[ 0.352604] pci 0000:02:06.0: MEM window: 0x8c000000-0x8fffffff
[ 0.352680] pci 0000:02:06.1: CardBus bridge, secondary bus 0000:04
[ 0.352742] pci 0000:02:06.1: IO window: 0x005800-0x0058ff
[ 0.352808] pci 0000:02:06.1: IO window: 0x005c00-0x005cff
[ 0.352875] pci 0000:02:06.1: PREFETCH window: 0x84000000-0x87ffffff
[ 0.352943] pci 0000:02:06.1: MEM window: 0x90000000-0x93ffffff
[ 0.353012] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.353079] pci 0000:00:1e.0: IO window: 0x5000-0x5fff
[ 0.353150] pci 0000:00:1e.0: MEM window: 0xe4100000-0xe43fffff
[ 0.353217] pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x87ffffff
[ 0.353307] alloc irq_desc for 16 on node -1
[ 0.353309] alloc kstat_irqs on node -1
[ 0.353314] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.353384] pci 0000:00:1c.0: setting latency timer to 64
[ 0.353400] alloc irq_desc for 17 on node -1
[ 0.353402] alloc kstat_irqs on node -1
[ 0.353406] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.353475] pci 0000:00:1c.1: setting latency timer to 64
[ 0.353494] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.353563] pci 0000:00:1c.4: setting latency timer to 64
[ 0.353580] pci 0000:00:1e.0: setting latency timer to 64
[ 0.353600] alloc irq_desc for 18 on node -1
[ 0.353602] alloc kstat_irqs on node -1
[ 0.353606] pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.353687] alloc irq_desc for 19 on node -1
[ 0.353689] alloc kstat_irqs on node -1
[ 0.353693] pci 0000:02:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.353761] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.353764] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.353767] pci_bus 0000:10: resource 1 mem: [0xe4000000-0xe40fffff]
[ 0.353770] pci_bus 0000:28: resource 0 io: [0x2000-0x3fff]
[ 0.353772] pci_bus 0000:28: resource 1 mem: [0xe0000000-0xe3ffffff]
[ 0.353775] pci_bus 0000:28: resource 2 pref mem [0x88000000-0x881fffff]
[ 0.353777] pci_bus 0000:02: resource 0 io: [0x5000-0x5fff]
[ 0.353780] pci_bus 0000:02: resource 1 mem: [0xe4100000-0xe43fffff]
[ 0.353782] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x87ffffff]
[ 0.353785] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.353787] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.353790] pci_bus 0000:03: resource 0 io: [0x5000-0x50ff]
[ 0.353792] pci_bus 0000:03: resource 1 io: [0x5400-0x54ff]
[ 0.353794] pci_bus 0000:03: resource 2 pref mem [0x80000000-0x83ffffff]
[ 0.353797] pci_bus 0000:03: resource 3 mem: [0x8c000000-0x8fffffff]
[ 0.353799] pci_bus 0000:04: resource 0 io: [0x5800-0x58ff]
[ 0.353801] pci_bus 0000:04: resource 1 io: [0x5c00-0x5cff]
[ 0.353804] pci_bus 0000:04: resource 2 pref mem [0x84000000-0x87ffffff]
[ 0.353806] pci_bus 0000:04: resource 3 mem: [0x90000000-0x93ffffff]
[ 0.353835] NET: Registered protocol family 2
[ 0.354014] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.354831] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.356563] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.357169] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.357232] TCP reno registered
[ 0.357410] NET: Registered protocol family 1
[ 0.357491] pci 0000:00:02.0: Boot video device
[ 0.357747] Unpacking initramfs...
[ 0.593456] Freeing initrd memory: 9565k freed
[ 0.598874] audit: initializing netlink socket (disabled)
[ 0.598955] type=2000 audit(1276348146.595:1): initialized
[ 0.599299] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.600778] VFS: Disk quotas dquot_6.5.2
[ 0.600892] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.601031] msgmni has been set to 4008
[ 0.601289] alg: No test for stdrng (krng)
[ 0.601394] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.601468] io scheduler noop registered
[ 0.601527] io scheduler anticipatory registered
[ 0.601587] io scheduler deadline registered
[ 0.601678] io scheduler cfq registered (default)
[ 0.601916] alloc irq_desc for 24 on node -1
[ 0.601918] alloc kstat_irqs on node -1
[ 0.601939] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.601961] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.602124] alloc irq_desc for 25 on node -1
[ 0.602126] alloc kstat_irqs on node -1
[ 0.602139] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.602155] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.602319] alloc irq_desc for 26 on node -1
[ 0.602321] alloc kstat_irqs on node -1
[ 0.602331] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 0.602348] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.604004] Linux agpgart interface v0.103
[ 0.604075] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 0.605372] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 0.610243] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.610375] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.610641] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[ 0.611039] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.611181] PNP: PS/2 Controller [PNP0303:C29A,PNP0f13:C29B] at 0x60,0x64 irq 1,12
[ 0.612880] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.613684] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.613749] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.613826] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.613896] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.613962] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.614093] mice: PS/2 mouse device common for all mice
[ 0.614204] rtc_cmos 00:08: RTC can wake from S4
[ 0.614307] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.614406] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.614488] cpuidle: using governor ladder
[ 0.614547] cpuidle: using governor menu
[ 0.614608] No iBFT detected.
[ 0.614979] TCP cubic registered
[ 0.615144] NET: Registered protocol family 10
[ 0.615651] lo: Disabled Privacy Extensions
[ 0.615989] Mobile IPv6
[ 0.616046] NET: Registered protocol family 17
[ 0.616182] PM: Resume from disk failed.
[ 0.616188] registered taskstats version 1
[ 0.616925] rtc_cmos 00:08: setting system clock to 2010-06-12 13:09:07 UTC (1276348147)
[ 0.617038] Initalizing network drop monitor service
[ 0.617123] Freeing unused kernel memory: 584k freed
[ 0.617339] Write protecting the kernel read-only data: 4208k
[ 0.630884] udev: starting version 154
[ 0.636063] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.759024] usbcore: registered new interface driver usbfs
[ 0.759226] usbcore: registered new interface driver hub
[ 0.759431] usbcore: registered new device driver usb
[ 0.761502] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.761638] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.761752] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.761758] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.761865] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.762010] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.765981] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.766992] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4621000
[ 0.774054] SCSI subsystem initialized
[ 0.777189] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 0.777275] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 0.781862] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.781953] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.782028] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.782106] usb usb1: Product: EHCI Host Controller
[ 0.782166] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.782228] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.782399] usb usb1: configuration #1 chosen from 1 choice
[ 0.782525] hub 1-0:1.0: USB hub found
[ 0.782590] hub 1-0:1.0: 4 ports detected
[ 0.782754] alloc irq_desc for 22 on node -1
[ 0.782757] alloc kstat_irqs on node -1
[ 0.782764] e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.782839] e1000e 0000:00:19.0: setting latency timer to 64
[ 0.782986] alloc irq_desc for 27 on node -1
[ 0.782988] alloc kstat_irqs on node -1
[ 0.783006] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
[ 0.784403] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.784472] ACPI: Thermal Zone [TZ0] (50 C)
[ 0.788561] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.788635] ACPI: Thermal Zone [TZ1] (50 C)
[ 0.790918] libata version 3.00 loaded.
[ 0.790948] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 0.791034] ricoh-mmc: Copyright(c) Philip Langdale
[ 0.791122] ricoh-mmc: Ricoh MMC controller found at 0000:02:06.4 [1180:0843] (rev 10)
[ 0.791242] ricoh-mmc: Controller is now disabled.
[ 0.801669] thermal LNXTHERM:03: registered as thermal_zone2
[ 0.801744] ACPI: Thermal Zone [TZ3] (38 C)
[ 0.804872] alloc irq_desc for 20 on node -1
[ 0.804875] alloc kstat_irqs on node -1
[ 0.804882] firewire_ohci 0000:02:06.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 0.809291] sdhci: Secure Digital Host Controller Interface driver
[ 0.809380] sdhci: Copyright(c) Pierre Ossman
[ 0.812757] thermal LNXTHERM:04: registered as thermal_zone3
[ 0.812825] ACPI: Thermal Zone [TZ4] (29 C)
[ 0.817418] thermal LNXTHERM:05: registered as thermal_zone4
[ 0.817486] ACPI: Thermal Zone [TZ5] (30 C)
[ 0.821256] fan PNP0C0B:00: registered as cooling_device0
[ 0.821335] ACPI: Fan [C3BA] (off)
[ 0.824029] fan PNP0C0B:01: registered as cooling_device1
[ 0.824118] ACPI: Fan [C3BB] (off)
[ 0.825036] fan PNP0C0B:02: registered as cooling_device2
[ 0.825112] ACPI: Fan [C3BC] (off)
[ 0.825389] fan PNP0C0B:03: registered as cooling_device3
[ 0.825464] ACPI: Fan [C3BD] (off)
[ 0.825726] fan PNP0C0B:04: registered as cooling_device4
[ 0.825805] ACPI: Fan [C3BE] (off)
[ 0.883203] firewire_ohci: Added fw-ohci device 0000:02:06.2, OHCI version 1.10
[ 0.883319] sdhci-pci 0000:02:06.3: SDHCI controller found [1180:0822] (rev 20)
[ 0.883442] sdhci-pci 0000:02:06.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.885590] Registered led device: mmc0::
[ 0.886681] mmc0: SDHCI controller on PCI [0000:02:06.3] using PIO
[ 1.042613] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1b:38:92:fa:68
[ 1.042688] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.042790] 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: ffffff-0ff
[ 1.042899] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.042980] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.042985] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.043056] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.043167] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.047110] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.047116] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe4628000
[ 1.060013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.060107] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.060170] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.060254] usb usb2: Product: EHCI Host Controller
[ 1.060314] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.060375] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.060519] usb usb2: configuration #1 chosen from 1 choice
[ 1.060619] hub 2-0:1.0: USB hub found
[ 1.060682] hub 2-0:1.0: 6 ports detected
[ 1.060811] ahci 0000:00:1f.2: version 3.0
[ 1.060834] alloc irq_desc for 21 on node -1
[ 1.060836] alloc kstat_irqs on node -1
[ 1.060844] ahci 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[ 1.060985] alloc irq_desc for 28 on node -1
[ 1.060987] alloc kstat_irqs on node -1
[ 1.061014] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 1.061056] ahci: SSS flag set, parallel bus scan disabled
[ 1.061159] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
[ 1.061239] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc
[ 1.061327] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.061553] scsi0 : ahci
[ 1.061743] scsi1 : ahci
[ 1.061893] scsi2 : ahci
[ 1.062040] ata1: SATA max UDMA/133 abar m2048@0xe4629000 port 0xe4629100 irq 28
[ 1.062113] ata2: DUMMY
[ 1.062169] ata3: DUMMY
[ 1.062329] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.062353] ata_piix 0000:00:1f.1: version 2.13
[ 1.062362] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.062412] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.062605] scsi3 : ata_piix
[ 1.062730] scsi4 : ata_piix
[ 1.063358] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40e0 irq 14
[ 1.063432] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40e8 irq 15
[ 1.063524] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.063707] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.063713] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.063805] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.063839] ata5: port disabled. ignoring.
[ 1.063935] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004040
[ 1.064043] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.064112] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.064192] usb usb3: Product: UHCI Host Controller
[ 1.064263] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.064326] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.064479] usb usb3: configuration #1 chosen from 1 choice
[ 1.064601] hub 3-0:1.0: USB hub found
[ 1.064670] hub 3-0:1.0: 2 ports detected
[ 1.064790] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.064862] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.064867] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.064935] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.065062] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00004060
[ 1.065159] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.065226] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.065304] usb usb4: Product: UHCI Host Controller
[ 1.065364] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.065426] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.065570] usb usb4: configuration #1 chosen from 1 choice
[ 1.065693] hub 4-0:1.0: USB hub found
[ 1.065756] hub 4-0:1.0: 2 ports detected
[ 1.065867] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.065943] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.065948] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.066014] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.066120] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004080
[ 1.066226] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.066289] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.066367] usb usb5: Product: UHCI Host Controller
[ 1.066427] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.066489] usb usb5: SerialNumber: 0000:00:1d.0
[ 1.066634] usb usb5: configuration #1 chosen from 1 choice
[ 1.066750] hub 5-0:1.0: USB hub found
[ 1.066819] hub 5-0:1.0: 2 ports detected
[ 1.066931] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 1.067003] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.067009] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.067084] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.067201] uhci_hcd 0000:00:1d.1: irq 22, io base 0x000040a0
[ 1.067300] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.067364] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.067446] usb usb6: Product: UHCI Host Controller
[ 1.067506] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.067567] usb usb6: SerialNumber: 0000:00:1d.1
[ 1.067713] usb usb6: configuration #1 chosen from 1 choice
[ 1.067837] hub 6-0:1.0: USB hub found
[ 1.067900] hub 6-0:1.0: 2 ports detected
[ 1.068020] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.068092] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.068097] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.068163] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.068268] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040c0
[ 1.068376] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.068449] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.068532] usb usb7: Product: UHCI Host Controller
[ 1.068592] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.068665] usb usb7: SerialNumber: 0000:00:1d.2
[ 1.068812] usb usb7: configuration #1 chosen from 1 choice
[ 1.068936] hub 7-0:1.0: USB hub found
[ 1.068999] hub 7-0:1.0: 2 ports detected
[ 1.224607] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-U10N, HP06, max MWDMA2
[ 1.240270] ata4.00: configured for MWDMA2
[ 1.380023] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.382193] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.382282] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.382479] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 1.382483] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.382943] ata1.00: ATA-7: FUJITSU MHW2080BH PL, 891F, max UDMA/100
[ 1.383011] ata1.00: 156301488 sectors, multi 16: LBA48
[ 1.384081] firewire_core: created device fw0: GUID 00023fa3299d480e, S400
[ 1.385640] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.385715] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.385912] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 1.385915] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.386397] ata1.00: configured for UDMA/100
[ 1.400959] ata1.00: configured for UDMA/100
[ 1.401028] ata1: EH complete
[ 1.402979] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2080B 891F PQ: 0 ANSI: 5
[ 1.406233] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U10N HP06 PQ: 0 ANSI: 5
[ 1.412231] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.412369] sd 0:0:0:0: [sda] Write Protect is off
[ 1.412430] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.412453] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.412675] sda: sda1 sda2
[ 1.448674] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.459393] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.459468] Uniform CD-ROM driver Revision: 3.20
[ 1.459610] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.463231] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.463421] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 1.632010] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 1.658456] device-mapper: uevent: version 1.0.3
[ 1.658714] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.796228] usb 5-2: New USB device found, idVendor=08ff, idProduct=2580
[ 1.796308] usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.796372] usb 5-2: Product: Fingerprint Sensor
[ 1.796516] usb 5-2: configuration #1 chosen from 1 choice
[ 1.823315] EXT4-fs (dm-0): mounted filesystem with ordered data mode
[ 2.996298] udev: starting version 154
[ 3.430547] ACPI: AC Adapter [C239] (on-line)
[ 3.472512] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 3.478314] ACPI: Battery Slot [C23B] (battery present)
[ 3.478446] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 3.478528] ACPI: Sleep Button [C2BB]
[ 3.478787] ACPI: Battery Slot [C23A] (battery absent)
[ 3.478920] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[ 3.479083] ACPI: Lid Switch [C153]
[ 3.479222] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 3.479312] ACPI: Power Button [PWRF]
[ 3.524987] ACPI: SSDT 000000007f7db75e 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317)
[ 3.525654] ACPI: SSDT 000000007f7dba62 004BA (v01 HP Cpu0Cst 00003001 INTL 20060317)
[ 3.528649] Monitor-Mwait will be used to enter C-1 state
[ 3.528673] Monitor-Mwait will be used to enter C-2 state
[ 3.528694] Monitor-Mwait will be used to enter C-3 state
[ 3.528701] Marking TSC unstable due to TSC halts in idle
[ 3.528799] Switching to clocksource hpet
[ 3.529146] processor LNXCPU:00: registered as cooling_device5
[ 3.529723] ACPI: SSDT 000000007f7db696 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
[ 3.530250] ACPI: SSDT 000000007f7db9dd 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
[ 3.531481] processor LNXCPU:01: registered as cooling_device6
[ 3.702729] ACPI: WMI: Mapper loaded
[ 3.738085] NET: Registered protocol family 23
[ 3.934458] cfg80211: Using static regulatory domain info
[ 3.934543] cfg80211: Regulatory domain: US
[ 3.934627] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3.934721] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 3.934814] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 3.934899] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 3.934980] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 3.935072] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 3.935150] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 3.935240] cfg80211: Calling CRDA for country: US
[ 3.977131] tpm_inf_pnp 00:04: Found C282 with ID IFX0102
[ 3.977288] tpm_inf_pnp 00:04: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
[ 4.169107] parport_pc 00:03: reported by Plug and Play ACPI
[ 4.169276] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 4.212079] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0
[ 4.212165] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 4.253054] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[ 4.268881] found SMC SuperIO Chip (devid=0x7a rev=03 base=0x004e): LPC47N227
[ 4.268988] smsc_superio_flat(): fir: 0x100, sir: 0x3e8, dma: 03, irq: 6, mode: 0x0e
[ 4.269073] smsc_ircc_present: can't get sir_base of 0x3e8
[ 4.332365] lis3lv02d: laptop model unknown, using default axes configuration
[ 4.333198] lis3lv02d: 2-byte sensor found
[ 4.346168] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
[ 4.346794] Registered led device: hp::hddprotect
[ 4.346879] lis3lv02d driver loaded.
[ 4.382302] [drm] Initialized drm 1.1.0 20060810
[ 4.406604] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30be]
[ 4.437672] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 4.437767] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 4.437915] iwlagn 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.438018] iwlagn 0000:10:00.0: setting latency timer to 64
[ 4.438066] iwlagn 0000:10:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
[ 4.481150] iwlagn 0000:10:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 4.481294] alloc irq_desc for 29 on node -1
[ 4.481296] alloc kstat_irqs on node -1
[ 4.481322] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.481324] iwlagn 0000:10:00.0: irq 29 for MSI/MSI-X
[ 4.481420] pci 0000:00:02.0: setting latency timer to 64
[ 4.490934] alloc irq_desc for 30 on node -1
[ 4.490937] alloc kstat_irqs on node -1
[ 4.490948] pci 0000:00:02.0: irq 30 for MSI/MSI-X
[ 4.493118] acpi device:00: registered as cooling_device7
[ 4.493870] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 4.494029] ACPI: Video Device [C098] (multi-head: yes rom: no post: no)
[ 4.494245] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.532721] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0438, PCI irq 18
[ 4.532790] yenta_cardbus 0000:02:06.0: Socket status: 30000006
[ 4.532856] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
[ 4.532934] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xe4100000 - 0xe43fffff
[ 4.533016] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x87ffffff
[ 4.533364] yenta_cardbus 0000:02:06.1: CardBus bridge found [103c:30be]
[ 4.545042] Error: Driver 'pcspkr' is already registered, aborting...
[ 4.582503] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 4.622980] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 4.623094] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 4.623166] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.623268] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 4.660759] yenta_cardbus 0000:02:06.1: ISA IRQ mask 0x0000, PCI irq 19
[ 4.660825] yenta_cardbus 0000:02:06.1: Socket status: 30000810
[ 4.660889] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #04 to #07
[ 4.660970] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
[ 4.661048] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge Memory window: 0xe4100000 - 0xe43fffff
[ 4.661126] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x87ffffff
[ 4.745199] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 5.296065] pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1
[ 5.296158] pcmcia_socket pcmcia_socket1: cs: memory probe 0x80000000-0x87ffffff: excluding 0x80000000-0x87ffffff
[ 5.296390] pcmcia_socket pcmcia_socket1: cs: memory probe 0xe4100000-0xe43fffff: excluding 0xe4100000-0xe412ffff
[ 5.300937] pcmcia 1.0: pcmcia: registering new device pcmcia1.0
[ 5.393492] Uniform Multi-Platform E-IDE driver
[ 5.437937] Probing IDE interface ide0...
[ 6.004107] ide0 at 0x5100-0x5107,0x510e on irq 19
[ 6.108054] Probing IDE interface ide0...
[ 6.780071] Probing IDE interface ide0...
[ 7.452063] Probing IDE interface ide0...
[ 8.124079] Probing IDE interface ide0...
[ 8.796077] Probing IDE interface ide0...
[ 9.314665] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input10
[ 9.468072] Probing IDE interface ide0...
[ 10.140081] Probing IDE interface ide0...
[ 10.812076] Probing IDE interface ide0...
[ 11.484054] Probing IDE interface ide0...
[ 12.156073] Probing IDE interface ide0...
[ 12.724074] ide-cs: hda: Vpp = 0.0
[ 13.464685] loop: module loaded
[ 15.613267] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
[ 15.668115] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
[ 15.668532] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.473573] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 18.473955] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 25.084454] [drm] Module unloaded
[ 26.534067] i915 0000:00:02.0: setting latency timer to 64
[ 26.542683] i915 0000:00:02.0: irq 30 for MSI/MSI-X
[ 26.542692] [drm] set up 7M of stolen space
[ 26.995786] [drm] initialized overlay support
[ 27.851638] Console: switching to colour frame buffer device 180x56
[ 27.855077] fb0: inteldrmfb frame buffer device
[ 27.855099] registered panic notifier
[ 27.856325] acpi device:00: registered as cooling_device7
[ 27.857003] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[ 27.857132] ACPI: Video Device [C098] (multi-head: yes rom: no post: no)
[ 27.857220] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
** Model information
sys_vendor: Hewlett-Packard
product_name: HP Compaq 6910p
product_version: F.0B
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: 68MCU Ver. F.0B
board_vendor: Hewlett-Packard
board_name: 30BE
board_version: KBC Version 68.32
** Loaded modules:
Module Size Used by
loop 11783 0
firewire_sbp2 11514 0
ide_cs 8612 1
ide_core 71722 1 ide_cs
snd_hda_codec_analog 64562 1
arc4 1274 2
snd_hda_intel 19907 0
ecb 1841 2
pcmcia 19474 1 ide_cs
snd_hda_codec 54244 2 snd_hda_codec_analog,snd_hda_intel
i915 252896 0
snd_hwdep 5380 1 snd_hda_codec
snd_pcm 60471 2 snd_hda_intel,snd_hda_codec
iwlagn 71756 0
snd_timer 15582 1 snd_pcm
drm_kms_helper 20065 1 i915
snd 46446 6 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
iwlcore 77442 1 iwlagn
soundcore 4598 1 snd
snd_page_alloc 6249 2 snd_hda_intel,snd_pcm
mac80211 136844 2 iwlagn,iwlcore
drm 142551 2 i915,drm_kms_helper
i2c_algo_bit 4225 1 i915
tpm_infineon 7499 0
tpm_tis 7336 0
i2c_core 15712 4 i915,drm_kms_helper,drm,i2c_algo_bit
tpm 9917 2 tpm_infineon,tpm_tis
yenta_socket 19115 4
tpm_bios 4521 1 tpm
wmi 4323 0
rsrc_nonstatic 7294 1 yenta_socket
irda 90114 0
cfg80211 101432 3 iwlagn,iwlcore,mac80211
video 17445 1 i915
output 1692 1 video
joydev 8411 0
pcmcia_core 24118 3 pcmcia,yenta_socket,rsrc_nonstatic
hp_accel 11056 0
parport_pc 18855 0
crc_ccitt 1323 1 irda
rfkill 13044 1 cfg80211
pcspkr 1699 0
psmouse 49777 0
lis3lv02d 5173 1 hp_accel
evdev 7352 5
container 2389 0
processor 30231 2
battery 4998 0
button 4650 1 i915
parport 27954 1 parport_pc
input_polldev 1967 1 lis3lv02d
ac 2192 0
serio_raw 3752 0
ext4 285611 1
mbcache 5050 1 ext4
jbd2 66919 1 ext4
crc16 1319 1 ext4
dm_mod 53754 11
sg 18744 0
sd_mod 29777 2
crc_t10dif 1276 1 sd_mod
sr_mod 12602 0
cdrom 29415 1 sr_mod
ata_generic 2983 0
uhci_hcd 18521 0
fan 3346 0
firewire_ohci 19468 0
sdhci_pci 5581 0
thermal 11674 0
firewire_core 36736 2 firewire_sbp2,firewire_ohci
sdhci 13966 1 sdhci_pci
ahci 32358 1
ata_piix 21012 0
ricoh_mmc 3069 0
mmc_core 45472 1 sdhci
crc_itu_t 1307 1 firewire_core
led_class 2433 3 iwlcore,hp_accel,sdhci
thermal_sys 11942 4 video,processor,fan,thermal
ehci_hcd 31039 0
libata 133520 3 ata_generic,ahci,ata_piix
scsi_mod 122117 5 firewire_sbp2,sg,sd_mod,sr_mod,libata
e1000e 109967 0
usbcore 121959 3 uhci_hcd,ehci_hcd
nls_base 6361 1 usbcore
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0a <?>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 0c) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 30
Region 0: Memory at e4400000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4000 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 41b9
Capabilities: [d0] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 0c)
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e4500000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [d0] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
00:19.0 Ethernet controller [0200]: Intel Corporation 82566MM Gigabit Network Connection [8086:1049] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 27
Region 0: Memory at e4600000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at e4620000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 4020 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 41c9
Kernel driver in use: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 4040 [size=32]
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 4060 [size=32]
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e4621000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at e4624000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed90000
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4171
Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:30be]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=01 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed90001
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
Memory behind bridge: e4000000-e40fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4179
Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:30be]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed90001
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=28, subordinate=28, sec-latency=0
I/O behind bridge: 00002000-00003fff
Memory behind bridge: e0000000-e3ffffff
Prefetchable memory behind bridge: 0000000088000000-00000000881fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #4, PowerLimit 0.160W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn+ PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4181
Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:30be]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=05 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed90001
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 4080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at 40a0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 40c0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at e4628000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=07, sec-latency=32
I/O behind bridge: 00005000-00005fff
Memory behind bridge: e4100000-e43fffff
Prefetchable memory behind bridge: 0000000080000000-0000000087ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Hewlett-Packard Company Device [103c:30be]
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HBM (ICH8M-E) LPC Interface Controller [8086:2811] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 40e0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 28
Region 0: I/O ports at 13f0 [size=8]
Region 1: I/O ports at 15f4 [size=4]
Region 2: I/O ports at 1370 [size=8]
Region 3: I/O ports at 1574 [size=4]
Region 4: I/O ports at 4120 [size=32]
Region 5: Memory at e4629000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/4 Maskable- 64bit-
Address: fee0300c Data: 41a9
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Kernel driver in use: ahci
02:06.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b9)
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e4100000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=03, sec-latency=176
Memory window 0: 80000000-83fff000 (prefetchable)
Memory window 1: 8c000000-8ffff000
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
02:06.1 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b9)
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin B routed to IRQ 19
Region 0: Memory at e4101000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=04, subordinate=07, sec-latency=176
Memory window 0: 84000000-87fff000 (prefetchable)
Memory window 1: 90000000-93fff000
I/O window 0: 00005800-000058ff
I/O window 1: 00005c00-00005cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
02:06.2 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 03) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 20
Region 0: Memory at e4102000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME+
Kernel driver in use: firewire_ohci
02:06.3 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 20)
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at e4103000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: sdhci-pci
02:06.4 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev ff) (prog-if ff)
!!! Unknown header type 7f
Kernel driver in use: ricoh-mmc
10:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection [8086:4229] (rev 61)
Subsystem: Intel Corporation Device [8086:1101]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at e4000000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 41b1
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 00-13-e8-ff-ff-ee-80-d1
Kernel driver in use: iwlagn
** USB devices:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy
ii initramfs-tools [linux-initr 0.94.4 tools for generating an initramfs
ii linux-base 2.6.32-15 Linux image base package
ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
pn firmware-linux-free <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
ii firmware-iwlwifi 0.24 Binary firmware for Intel Wireless
pn firmware-linux <none> (no description available)
pn firmware-linux-no <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
ii xen-hypervisor-3. 3.4.3-1 The Xen Hypervisor on AMD64
ii xen-hypervisor-4. 4.0.0-1~experimental.2 The Xen Hypervisor on AMD64
-- debconf information excluded
Reply to: