--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.32-trunk-amd64: Please add/enable CONFIG_DVB_LGS8GXX=m
- From: "H.W. Wan" <hwwan80@gmail.com>
- Date: Fri, 05 Feb 2010 01:28:27 +0800
- Message-id: <20100204172827.22225.87694.reportbug@hwwan-desktop>
Package: linux-2.6
Version: 2.6.32-5
Severity: normal
I'm not able to use my USB DMB tuner which get the following error in dmesg
[ 427.984996] dvb-usb: found a 'Conexant DMB-TH Stick' in warm state.
[ 428.328052] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 428.328316] DVB: registering new adapter (Conexant DMB-TH Stick)
[ 430.571246] DVB: Unable to find symbol lgs8gxx_attach()
[ 430.571250] dvb-usb: no frontend was attached by 'Conexant DMB-TH Stick'
[ 430.571689] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.4/input/input8
[ 430.571744] dvb-usb: schedule remote query interval to 100 msecs.
[ 430.572027] dvb-usb: Conexant DMB-TH Stick successfully initialized and connected.
[ 430.572049] usbcore: registered new interface driver dvb_usb_cxusb
Please enable LGS8GXX
Thanks
-- Package-specific info:
** Version:
Linux version 2.6.32-trunk-amd64 (Debian 2.6.32-5) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 22:40:40 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-amd64 root=UUID=ddf616cc-0e18-47c9-8ab5-8515f6d55fc2 ro quiet
** Not tainted
** Kernel log:
[22798.784599] groups: 0-1 (cpu_power = 2048)
[22798.784604] CPU1 attaching sched-domain:
[22798.784606] domain 0: span 0-1 level MC
[22798.784608] groups: 1 0
[22798.784612] domain 1: span 0-1 level CPU
[22798.784614] groups: 0-1 (cpu_power = 2048)
[22798.988717] VFS: busy inodes on changed media or resized disk sr0
[22799.008702] VFS: busy inodes on changed media or resized disk sr0
[22800.894856] VFS: busy inodes on changed media or resized disk sr0
[22800.912845] VFS: busy inodes on changed media or resized disk sr0
[22800.930839] VFS: busy inodes on changed media or resized disk sr0
[22802.896956] VFS: busy inodes on changed media or resized disk sr0
[22802.914970] VFS: busy inodes on changed media or resized disk sr0
[22802.932936] VFS: busy inodes on changed media or resized disk sr0
[22804.898060] VFS: busy inodes on changed media or resized disk sr0
[22804.916047] VFS: busy inodes on changed media or resized disk sr0
[22804.952033] VFS: busy inodes on changed media or resized disk sr0
[22806.896165] VFS: busy inodes on changed media or resized disk sr0
[22806.914173] VFS: busy inodes on changed media or resized disk sr0
[22806.932142] VFS: busy inodes on changed media or resized disk sr0
[22808.898291] VFS: busy inodes on changed media or resized disk sr0
[22808.916259] VFS: busy inodes on changed media or resized disk sr0
[22808.952245] VFS: busy inodes on changed media or resized disk sr0
[22810.908733] VFS: busy inodes on changed media or resized disk sr0
[22823.383872] hub 1-0:1.0: over-current change on port 1
[22823.399997] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71
[22823.403984] usb 1-4: clear tt 1 (0080) error -71
[22823.408372] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71
[22823.412358] usb 1-4: clear tt 1 (0080) error -71
[22823.424000] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71
[22823.427987] usb 1-4: clear tt 1 (0080) error -71
[22823.432375] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71
[22823.436362] usb 1-4: clear tt 1 (0080) error -71
[22823.448007] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71
[22823.451990] usb 1-4: clear tt 1 (0080) error -71
[22823.464009] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71
[22823.467993] usb 1-4: clear tt 1 (0080) error -71
[22823.472382] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71
[22823.476368] usb 1-4: clear tt 1 (0080) error -71
[22823.484008] hub 1-0:1.0: over-current change on port 2
[22823.488013] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71
[22823.491997] usb 1-4: clear tt 1 (0080) error -71
[22823.496384] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71
[22823.500372] usb 1-4: clear tt 1 (0080) error -71
[22823.512015] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71
[22823.516000] usb 1-4: clear tt 1 (0080) error -71
[22823.520388] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71
[22823.524375] usb 1-4: clear tt 1 (0080) error -71
[22823.536022] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71
[22823.540010] usb 1-4: clear tt 1 (0080) error -71
[22823.544391] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71
[22823.548379] usb 1-4: clear tt 1 (0080) error -71
[22823.560070] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71
[22823.564015] usb 1-4: clear tt 1 (0080) error -71
[22823.568395] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71
[22823.572383] usb 1-4: clear tt 1 (0080) error -71
[22823.584028] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71
[22823.588018] hub 1-0:1.0: over-current change on port 3
[22823.588040] usb 1-4: clear tt 1 (0080) error -71
[22823.592400] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71
[22823.596387] usb 1-4: clear tt 1 (0080) error -71
[22823.600400] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71
[22823.604388] usb 1-4: clear tt 1 (0080) error -71
[22823.616036] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71
[22823.620017] usb 1-4: clear tt 1 (0080) error -71
[22823.624404] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71
[22823.628391] usb 1-4: clear tt 1 (0080) error -71
[22823.640034] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71
[22823.644019] usb 1-4: clear tt 1 (0080) error -71
[22823.648407] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71
[22823.652395] usb 1-4: clear tt 1 (0080) error -71
[22823.664037] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71
[22823.668023] usb 1-4: clear tt 1 (0080) error -71
[22823.672412] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71
[22823.676399] usb 1-4: clear tt 1 (0080) error -71
[22823.688039] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71
[22823.692014] usb 1-4: USB disconnect, address 7
[22823.692027] usb 1-4.2: USB disconnect, address 8
[22823.692031] usb 1-4: clear tt 1 (0080) error -71
[22823.960014] usb 1-4: new high speed USB device using ehci_hcd and address 10
[22824.093336] usb 1-4: New USB device found, idVendor=05e3, idProduct=0608
[22824.093339] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[22824.093341] usb 1-4: Product: USB2.0 Hub
[22824.093422] usb 1-4: configuration #1 chosen from 1 choice
[22824.093834] hub 1-4:1.0: USB hub found
[22824.094085] hub 1-4:1.0: 4 ports detected
[22824.095487] hub 1-0:1.0: over-current change on port 5
[22824.196015] hub 1-0:1.0: over-current change on port 6
[22824.372259] usb 1-4.2: new low speed USB device using ehci_hcd and address 11
[22824.468394] usb 1-4.2: New USB device found, idVendor=093a, idProduct=2510
[22824.468397] usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[22824.468400] usb 1-4.2: Product: USB OPTICAL MOUSE
[22824.468402] usb 1-4.2: Manufacturer: PIXART
[22824.468491] usb 1-4.2: configuration #1 chosen from 1 choice
[22824.472451] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/1-4.2:1.0/input/input11
[22824.472544] generic-usb 0003:093A:2510.0004: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1a.7-4.2/input0
[23082.640483] scim-bridge[3300]: segfault at 10 ip 00007f49b56a01a6 sp 00007fff922fb458 error 4 in libscim-1.0.so.8.2.4[7f49b562f000+d7000]
[62282.366611] scim-bridge[18631]: segfault at 10 ip 00007f3eb00de1a6 sp 00007fffbbc39fb8 error 4 in libscim-1.0.so.8.2.4[7f3eb006d000+d7000]
[66575.981899] device eth0 entered promiscuous mode
[72884.458021] device eth0 left promiscuous mode
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 0412
board_vendor: ASUSTeK Computer INC.
board_name: P5QL-EM
board_version: Rev X.0x
** Loaded modules:
Module Size Used by
vboxnetadp 4225 0
vboxnetflt 9978 0
vboxdrv 1710230 2 vboxnetadp,vboxnetflt
ext4 285067 1
jbd2 66855 1 ext4
lgs8gl5 4298 0
dvb_usb_cxusb 50457 0
dib7000p 13369 1 dvb_usb_cxusb
dibx000_common 2437 1 dib7000p
dvb_usb 12276 1 dvb_usb_cxusb
dib0070 6413 1 dvb_usb_cxusb
nls_utf8 1208 1
isofs 27480 1
udf 66612 0
i915 247359 3
drm_kms_helper 18883 1 i915
drm 137190 4 i915,drm_kms_helper
i2c_algo_bit 4225 1 i915
video 17445 1 i915
output 1692 1 video
binfmt_misc 6431 1
ppdev 5030 0
lp 7462 0
sco 7193 0
bridge 39582 0
stp 1440 1 bridge
bnep 9395 0
rfcomm 29501 0
l2cap 24656 4 bnep,rfcomm
crc16 1319 2 ext4,l2cap
bluetooth 41795 4 sco,bnep,rfcomm,l2cap
rfkill 12996 1 bluetooth
dvb_ttpci 81346 0
dvb_core 76538 3 dib7000p,dvb_usb,dvb_ttpci
saa7146_vv 37774 1 dvb_ttpci
videodev 29977 1 saa7146_vv
v4l1_compat 11442 1 videodev
v4l2_compat_ioctl32 8538 1 videodev
saa7146 11803 2 dvb_ttpci,saa7146_vv
videobuf_dma_sg 8387 1 saa7146_vv
videobuf_core 12196 2 saa7146_vv,videobuf_dma_sg
ttpci_eeprom 1560 1 dvb_ttpci
ipmi_devintf 6555 0
ibmaem 7733 0
ibmpex 5092 0
ipmi_msghandler 26506 3 ipmi_devintf,ibmaem,ibmpex
battery 4998 0
acpi_cpufreq 5555 0
cpufreq_conservative 5162 0
cpufreq_powersave 902 0
cpufreq_stats 2659 0
cpufreq_userspace 1992 0
ipt_REJECT 1953 1
ipt_LOG 4518 1
xt_limit 1782 2
xt_tcpudp 2319 10
xt_state 1303 6
ipt_addrtype 1769 4
ip6table_filter 2384 1
ip6_tables 15075 1 ip6table_filter
nf_nat_irc 1366 0
nf_conntrack_irc 3347 1 nf_nat_irc
nf_nat_ftp 2031 0
nf_nat 13340 2 nf_nat_irc,nf_nat_ftp
nf_conntrack_ipv4 9817 8 nf_nat
nf_defrag_ipv4 1139 1 nf_conntrack_ipv4
nf_conntrack_ftp 5553 1 nf_nat_ftp
nf_conntrack 46359 7 xt_state,nf_nat_irc,nf_conntrack_irc,nf_nat_ftp,nf_nat,nf_conntrack_ipv4,nf_conntrack_ftp
iptable_filter 2258 1
ip_tables 13899 1 iptable_filter
x_tables 12813 8 ipt_REJECT,ipt_LOG,xt_limit,xt_tcpudp,xt_state,ipt_addrtype,ip6_tables,ip_tables
fuse 50078 3
firewire_sbp2 11450 0
loop 11767 0
snd_hda_codec_intelhdmi 10695 1
snd_hda_codec_realtek 235095 1
snd_hda_intel 18147 5
snd_hda_codec 54212 3 snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5364 1 snd_hda_codec
snd_pcm_oss 32399 0
snd_mixer_oss 12606 1 snd_pcm_oss
snd_pcm 60615 4 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 4208 0
snd_rawmidi 15291 1 snd_seq_midi
snd_seq_midi_event 4628 1 snd_seq_midi
snd_seq 42769 2 snd_seq_midi,snd_seq_midi_event
processor 29479 1 acpi_cpufreq
asus_atk0110 7686 0
pcspkr 1699 0
i2c_i801 7766 0
snd_timer 15502 2 snd_pcm,snd_seq
snd_seq_device 4477 3 snd_seq_midi,snd_rawmidi,snd_seq
parport_pc 18839 1
evdev 7336 11
parport 27938 3 ppdev,lp,parport_pc
i2c_core 15584 12 lgs8gl5,dib7000p,dibx000_common,dvb_usb,dib0070,i915,drm,i2c_algo_bit,dvb_ttpci,videodev,ttpci_eeprom,i2c_i801
snd 44718 21 snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 4598 1 snd
snd_page_alloc 6217 2 snd_hda_intel,snd_pcm
ext3 106454 3
jbd 37037 1 ext3
mbcache 4970 2 ext4,ext3
raid1 18175 4
md_mod 73616 5 raid1
sg 18728 0
sr_mod 12602 1
cdrom 29399 1 sr_mod
sd_mod 29673 12
crc_t10dif 1276 1 sd_mod
usbhid 31196 0
ahci 31494 0
ata_generic 2983 0
ide_pci_generic 2788 0
hid 62745 1 usbhid
ide_core 76802 1 ide_pci_generic
pata_marvell 2629 1
floppy 49087 0
intel_agp 25521 1
agpgart 24733 2 drm,intel_agp
r8169 28765 0
mii 3210 1 r8169
firewire_ohci 19452 0
firewire_core 36560 2 firewire_sbp2,firewire_ohci
crc_itu_t 1307 2 udf,firewire_core
button 4634 1 i915
uhci_hcd 18457 0
ata_piix 19757 10
ehci_hcd 30578 0
libata 131655 4 ahci,ata_generic,pata_marvell,ata_piix
scsi_mod 121909 5 firewire_sbp2,sg,sr_mod,sd_mod,libata
usbcore 121687 6 dvb_usb_cxusb,dvb_usb,usbhid,uhci_hcd,ehci_hcd
nls_base 6377 4 nls_utf8,isofs,udf,usbcore
thermal 11674 0
fan 3346 0
thermal_sys 11878 4 video,processor,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e20] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:8336]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e22] (rev 03) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8336]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 29
Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at cc00 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e23] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:8336]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at c480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at c800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at c880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe3fbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e]
Subsystem: ASUSTeK Computer Inc. Device [1043:82fe]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fe3f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: f4000000-f43fffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 [8086:3a46] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000f4400000-00000000f45fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000f4600000-00000000f47fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 [8086:3a4a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at c000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at c080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at c400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe3fb800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIB (ICH10) LPC Interface Controller [8086:3a18]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at ac00 [size=8]
Region 1: I/O ports at a880 [size=4]
Region 2: I/O ports at a800 [size=8]
Region 3: I/O ports at a480 [size=4]
Region 4: I/O ports at a400 [size=16]
Region 5: I/O ports at a080 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe3fb400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26] (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at bc00 [size=8]
Region 1: I/O ports at b880 [size=4]
Region 2: I/O ports at b800 [size=8]
Region 3: I/O ports at b480 [size=4]
Region 4: I/O ports at b400 [size=16]
Region 5: I/O ports at b080 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:82c6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 28
Region 0: I/O ports at d800 [size=256]
Region 2: Memory at fdeff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fdee0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at fe9f0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
02:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6121 SATA II Controller [11ab:6121] (rev b2) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82a2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at ec00 [size=8]
Region 1: I/O ports at e880 [size=4]
Region 2: I/O ports at e800 [size=8]
Region 3: I/O ports at e480 [size=4]
Region 4: I/O ports at e400 [size=16]
Region 5: Memory at feaffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: pata_marvell
03:00.0 FireWire (IEEE 1394) [0c00]: JMicron Technology Corp. IEEE 1394 Host Controller [197b:2380] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8313]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at febff400 (32-bit, non-prefetchable) [size=128]
Region 4: Memory at febff000 (32-bit, non-prefetchable) [size=128]
Region 5: Memory at febfec00 (32-bit, non-prefetchable) [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 011: ID 093a:2510 Pixart Imaging, Inc. Hama Optical Mouse
Bus 001 Device 010: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB [Hama]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'transitional'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-trunk-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_HK.UTF-8, LC_CTYPE=zh_HK.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-trunk-amd64 depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.11-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-trunk-amd64 recommends:
ii firmware-linux-free 2.6.32-5 Binary firmware for various driver
Versions of packages linux-image-2.6.32-trunk-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-trunk-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information:
linux-image-2.6.32-trunk-amd64/postinst/depmod-error-initrd-2.6.32-trunk-amd64: false
linux-image-2.6.32-trunk-amd64/prerm/would-invalidate-boot-loader-2.6.32-trunk-amd64: true
linux-image-2.6.32-trunk-amd64/postinst/bootloader-error-2.6.32-trunk-amd64:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-trunk-amd64/prerm/removing-running-kernel-2.6.32-trunk-amd64: true
linux-image-2.6.32-trunk-amd64/postinst/bootloader-test-error-2.6.32-trunk-amd64:
* linux-image-2.6.32-trunk-amd64/postinst/missing-firmware-2.6.32-trunk-amd64:
--- End Message ---