Bug#568896: linux-image-2.6.32-2-amd64 segfaults 32bit executables
Package: linux-2.6
Version: 2.6.32-7
Severity: normal
I run an amd64 installation, using 32bit solely in order to run skype.
With linux-image-2.6.32-2-amd64 32bit exectutables segfault
immediately, e.g. :
strace skype
execve("/usr/bin/skype", ["skype"], [/* 37 vars */]) = 0
[ Process PID=2766 runs in 32 bit mode. ]
--- SIGSEGV (Segmentation fault) @ 0 (0) ---
+++ killed by SIGSEGV +++
Erreur de segmentation
strace /lib32/ld-linux.so.2
execve("/lib32/ld-linux.so.2", ["/lib32/ld-linux.so.2"], [/* 37 vars */]) = 0
[ Process PID=2778 runs in 32 bit mode. ]
--- SIGSEGV (Segmentation fault) @ 0 (0) ---
+++ killed by SIGSEGV +++
Erreur de segmentation
This error does not appear in earlier kernels (2.6.32-1-amd64
and 2.6.32-trunk-amd64).
Any idea why ?
All the best,
Itai.
-- Package-specific info:
** Version:
Linux version 2.6.32-2-amd64 (Debian 2.6.32-7) (dannf@debian.org) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Thu Feb 4 01:59:06 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-2-amd64 root=UUID=ad22ee96-9f5d-4294-9373-08a81de4b442 ro quiet
** Not tainted
** Kernel log:
[ 14.678378] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
[ 14.678438] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.678443] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.678446] usb usb3: Product: UHCI Host Controller
[ 14.678449] usb usb3: Manufacturer: Linux 2.6.32-2-amd64 uhci_hcd
[ 14.678452] usb usb3: SerialNumber: 0000:00:1d.1
[ 14.678554] usb usb3: configuration #1 chosen from 1 choice
[ 14.678607] hub 3-0:1.0: USB hub found
[ 14.678618] hub 3-0:1.0: 2 ports detected
[ 14.678701] alloc irq_desc for 18 on node -1
[ 14.678704] alloc kstat_irqs on node -1
[ 14.678711] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 14.678721] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 14.678725] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 14.678737] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 14.678776] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 14.678833] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.678837] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.678840] usb usb4: Product: UHCI Host Controller
[ 14.678843] usb usb4: Manufacturer: Linux 2.6.32-2-amd64 uhci_hcd
[ 14.678845] usb usb4: SerialNumber: 0000:00:1d.2
[ 14.678955] usb usb4: configuration #1 chosen from 1 choice
[ 14.678997] hub 4-0:1.0: USB hub found
[ 14.679006] hub 4-0:1.0: 2 ports detected
[ 14.679077] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 14.679087] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 14.679092] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 14.679104] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 14.679132] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
[ 14.679180] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.679184] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.679187] usb usb5: Product: UHCI Host Controller
[ 14.679189] usb usb5: Manufacturer: Linux 2.6.32-2-amd64 uhci_hcd
[ 14.679192] usb usb5: SerialNumber: 0000:00:1d.3
[ 14.679278] usb usb5: configuration #1 chosen from 1 choice
[ 14.679324] hub 5-0:1.0: USB hub found
[ 14.679333] hub 5-0:1.0: 2 ports detected
[ 14.862257] Adding 3903752k swap on /dev/sda5. Priority:-1 extents:1 across:3903752k
[ 14.910820] usb 1-2: New USB device found, idVendor=046d, idProduct=08ca
[ 14.910825] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=2
[ 14.910829] usb 1-2: SerialNumber: 2AA4EC95
[ 14.910960] usb 1-2: configuration #1 chosen from 1 choice
[ 14.981929] loop: module loaded
[ 14.997016] Linux video capture interface: v2.00
[ 15.089186] uvcvideo: Found UVC 1.00 device <unnamed> (046d:08ca)
[ 15.105132] input: UVC Camera (046d:08ca) as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input3
[ 15.105218] usbcore: registered new interface driver uvcvideo
[ 15.105226] USB Video Class driver (v0.1.0)
[ 15.138741] usbcore: registered new interface driver snd-usb-audio
[ 15.316020] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 15.459712] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 15.554898] usb 4-1: New USB device found, idVendor=0a12, idProduct=0001
[ 15.554904] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 15.555036] usb 4-1: configuration #1 chosen from 1 choice
[ 15.767115] Bluetooth: Core ver 2.15
[ 15.767202] NET: Registered protocol family 31
[ 15.767206] Bluetooth: HCI device and connection manager initialized
[ 15.767209] Bluetooth: HCI socket layer initialized
[ 15.787669] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 15.787905] usbcore: registered new interface driver btusb
[ 15.796027] usb 4-2: new low speed USB device using uhci_hcd and address 3
[ 15.973905] usb 4-2: New USB device found, idVendor=046d, idProduct=c517
[ 15.973911] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 15.973915] usb 4-2: Product: USB Receiver
[ 15.973917] usb 4-2: Manufacturer: Logitech
[ 15.974064] usb 4-2: configuration #1 chosen from 1 choice
[ 16.036250] usbcore: registered new interface driver hiddev
[ 16.036988] usbcore: registered new interface driver usbhid
[ 16.037154] usbhid: v2.6:USB HID core driver
[ 16.079252] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input4
[ 16.079444] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-2/input0
[ 16.097379] fuse init (API version 7.13)
[ 16.110920] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[ 16.111825] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/input/input5
[ 16.112131] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2/input1
[ 16.741096] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.326842] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 18.326847] tg3: eth0: Flow control is on for TX and on for RX.
[ 18.327184] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.091248] Bluetooth: L2CAP ver 2.14
[ 19.091252] Bluetooth: L2CAP socket layer initialized
[ 19.115276] Bluetooth: RFCOMM TTY layer initialized
[ 19.115282] Bluetooth: RFCOMM socket layer initialized
[ 19.115285] Bluetooth: RFCOMM ver 1.11
[ 19.122578] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.122582] Bluetooth: BNEP filters: protocol multicast
[ 19.143882] Bridge firewalling registered
[ 19.201072] Bluetooth: SCO (Voice Link) ver 0.6
[ 19.201076] Bluetooth: SCO socket layer initialized
[ 28.936007] eth0: no IPv6 routers present
[ 37.265221] CPU0 attaching NULL sched-domain.
[ 37.265230] CPU1 attaching NULL sched-domain.
[ 37.288109] CPU0 attaching sched-domain:
[ 37.288115] domain 0: span 0-1 level CPU
[ 37.288120] groups: 0 1
[ 37.288129] CPU1 attaching sched-domain:
[ 37.288132] domain 0: span 0-1 level CPU
[ 37.288136] groups: 1 0
[ 77.838320] ld-linux.so.2[2477]: segfault at df326850 ip 00000000df326850 sp 00000000355f1410 error 14
[ 258.344989] ld-linux.so.2[2562]: segfault at 840b5850 ip 00000000840b5850 sp 0000000002d20f80 error 14
** Model information
sys_vendor: Dell Inc.
product_name: OptiPlex GX620
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A11
board_vendor: Dell Inc.
board_name: 0FH884
board_version:
** Loaded modules:
Module Size Used by
sco 7193 2
bridge 39454 0
stp 1440 1 bridge
bnep 9331 2
rfcomm 29437 4
l2cap 24656 16 bnep,rfcomm
cpufreq_conservative 5162 0
cpufreq_userspace 1960 0
cpufreq_powersave 902 0
cpufreq_stats 2659 0
binfmt_misc 6399 1
joydev 8411 0
fuse 49886 5
hid_logitech 6294 0
ff_memless 3692 1 hid_logitech
usbhid 32988 1 hid_logitech
hid 62761 2 hid_logitech,usbhid
btusb 9785 2
bluetooth 41731 9 sco,bnep,rfcomm,l2cap,btusb
rfkill 12932 3 bluetooth
snd_usb_audio 63766 1
uvcvideo 51663 0
snd_usb_lib 13697 1 snd_usb_audio
snd_rawmidi 15483 1 snd_usb_lib
snd_seq_device 4477 1 snd_rawmidi
snd_hwdep 5364 1 snd_usb_audio
videodev 29865 1 uvcvideo
v4l1_compat 11442 2 uvcvideo,videodev
v4l2_compat_ioctl32 8538 1 videodev
loop 11735 0
ide_cd_mod 24712 0
cdrom 29399 1 ide_cd_mod
snd_intel8x0 24122 2
snd_ac97_codec 99170 1 snd_intel8x0
ac97_bus 1086 1 snd_ac97_codec
snd_pcm_oss 32591 0
snd_mixer_oss 12606 1 snd_pcm_oss
snd_pcm 60615 4 snd_usb_audio,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 15502 1 snd_pcm
snd 46318 16 snd_usb_audio,snd_rawmidi,snd_seq_device,snd_hwdep,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 4598 1 snd
snd_page_alloc 6137 2 snd_intel8x0,snd_pcm
uhci_hcd 18425 0
ehci_hcd 30450 0
usbcore 121511 8 usbhid,btusb,snd_usb_audio,uvcvideo,snd_usb_lib,uhci_hcd,ehci_hcd
nls_base 6377 1 usbcore
tg3 95439 0
i2c_i801 7798 0
piix 4568 0
libphy 13510 1 tg3
intel_agp 25529 0
rng_core 2990 0
dcdbas 5000 0
processor 29431 0
button 4634 0
serio_raw 3752 0
evdev 7336 15
psmouse 49473 0
ext4 284427 2
mbcache 4970 1 ext4
jbd2 66631 1 ext4
crc16 1319 2 l2cap,ext4
fan 3346 0
radeon 448671 3
ttm 31308 1 radeon
drm_kms_helper 18819 1 radeon
drm 136982 5 radeon,ttm,drm_kms_helper
i2c_algo_bit 4225 1 radeon
i2c_core 15552 5 videodev,i2c_i801,radeon,drm,i2c_algo_bit
sd_mod 29609 4
crc_t10dif 1276 1 sd_mod
ata_piix 19725 3
ata_generic 2983 0
libata 131431 2 ata_piix,ata_generic
thermal 11674 0
thermal_sys 11878 3 processor,fan,thermal
ide_pci_generic 2788 0
scsi_mod 121669 2 sd_mod,libata
ide_core 76514 3 ide_cd_mod,piix,ide_pci_generic
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
#auto eth0
iface eth0 inet dhcp
** Network status:
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 900 14 0 0 0 0 0 0 900 14 0 0 0 0 0 0
eth0: 485119 1776 0 0 0 0 0 274 52905 469 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
1112 total packets received
28 with invalid addresses
0 forwarded
0 incoming packets discarded
1084 incoming packets delivered
439 requests sent out
112 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
25 active connections openings
0 passive connection openings
7 failed connection attempts
1 connection resets received
4 connections established
326 segments received
327 segments send out
1 segments retransmited
0 bad segments received.
10 resets sent
Udp:
369 packets received
0 packets to unknown port received.
0 packet receive errors
116 packets sent
UdpLite:
TcpExt:
12 delayed acks sent
Quick ack mode was activated 2 times
1 packets directly queued to recvmsg prequeue.
1 bytes directly received in process context from prequeue
213 packet headers predicted
30 acknowledgments not containing data payload received
32 predicted acknowledgments
1 congestion windows recovered without slow start after partial ack
1 other TCP timeouts
2 DSACKs sent for old packets
1 connections reset due to unexpected data
1 connections reset due to early user close
IpExt:
InMcastPkts: 283
OutMcastPkts: 29
InBcastPkts: 393
InOctets: 421940
OutOctets: 40583
InMcastOctets: 60170
OutMcastOctets: 4051
InBcastOctets: 41109
*** Device features:
eth0: 0x109a3
lo: 0x13865
pan0: 0xff3865
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02)
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port [8086:2771] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe900000-feafffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: fe800000-fe8fffff
Prefetchable memory behind bridge: 0000000080000000-00000000801fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: fe700000-fe7fffff
Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at ff80 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at ff60 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ff40 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 4: I/O ports at ff20 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801G (ICH7 Family) AC'97 Audio Controller [8086:27de] (rev 01)
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at ec00 [size=256]
Region 1: I/O ports at e8c0 [size=64]
Region 2: Memory at febffa00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at febff900 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Device [1028:01ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: PIIX_IDE
00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 20
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fe10 [size=4]
Region 2: I/O ports at fe20 [size=8]
Region 3: I/O ports at fe30 [size=4]
Region 4: I/O ports at fea0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01)
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at e8a0 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV380 [Radeon X600 (PCIE)] [1002:5b62] (prog-if 00 [VGA controller])
Subsystem: ATI Technologies Inc Device [1002:0b02]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fe9e0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at dc00 [size=256]
Expansion ROM at fea00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
01:00.1 Display controller [0380]: ATI Technologies Inc RV380 [Radeon X600] [1002:5b72]
Subsystem: ATI Technologies Inc Device [1002:0b03]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express [14e4:1677] (rev 01)
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe8f0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
** USB devices:
Bus 004 Device 003: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
Bus 004 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 046d:08ca Logitech, Inc. Mic (Fusion)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (600, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initr 0.93.4 tools for generating an initramfs
ii module-init-tools 3.12~pre1-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-2-amd64 recommends:
ii firmware-linux-free 2.6.32-7 Binary firmware for various driver
Versions of packages linux-image-2.6.32-2-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-2-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.22 Binary firmware for various driver
ii firmware-linux-nonfree 0.22 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-2-amd64/postinst/missing-firmware-2.6.32-2-amd64:
linux-image-2.6.32-2-amd64/postinst/bootloader-error-2.6.32-2-amd64:
linux-image-2.6.32-2-amd64/postinst/bootloader-test-error-2.6.32-2-amd64:
linux-image-2.6.32-2-amd64/postinst/depmod-error-initrd-2.6.32-2-amd64: false
linux-image-2.6.32-2-amd64/prerm/removing-running-kernel-2.6.32-2-amd64: true
linux-image-2.6.32-2-amd64/prerm/would-invalidate-boot-loader-2.6.32-2-amd64: true
Reply to: