--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.29-2-686: X.org crash linked to i915_gem.c
- From: "George B." <i93.borg@gmail.com>
- Date: Thu, 25 Jun 2009 12:02:15 +0100
- Message-id: <20090625110215.5049.22375.reportbug@chr-w-borisov.olympus.f5net.com>
Package: linux-image-2.6.29-2-686
Version: 2.6.29-5
Severity: normal
Hello,
Just found this in the syslog - I think it means X.org crashed due to something in the i915 module:
---
Jun 25 09:47:56 chr-w-borisov kernel: [32133.636141] WARNING: at /build/buildd-linux-2.6_2.6.29-5-i386-xtBC0n/linux-2.6-2.6.29/debian/build/source_i386_none/drivers/gpu/drm/i915/i915_gem.c:3119 i915_gem_idle+0x16d/0x275 [i915]()
Jun 25 09:47:56 chr-w-borisov kernel: [32133.636145] Hardware name: OptiPlex 745
Jun 25 09:47:56 chr-w-borisov kernel: [32133.636148] Modules linked in: i915 drm i2c_algo_bit binfmt_misc ppdev lp ipv6 xfs exportfs dm_snapshot dm_mirror dm_region_hash dm_log dm_mod loop snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss
snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device psmou
se serio_raw snd soundcore snd_page_alloc parport_pc parport i2c_i801 i2c_core dcdbas evdev pcspkr button ext3 jbd mbcache sg sr_m
od cdrom sd_mod crc_t10dif ide_pci_generic ide_core ata_generic usbhid hid tg3 ata_piix libata scsi_mod uhci_hcd libphy ehci_hcd i
ntel_agp usbcore agpgart thermal processor fan thermal_sys
Jun 25 09:47:56 chr-w-borisov kernel: [32133.636226] Pid: 12549, comm: Xorg Not tainted 2.6.29-2-686 #1
Jun 25 09:47:56 chr-w-borisov kernel: [32133.636229] Call Trace:
Jun 25 09:47:56 chr-w-borisov kernel: [32133.636236] [<c0125e3c>] warn_slowpath+0x80/0xb6
Jun 25 09:47:56 chr-w-borisov kernel: [32133.636241] [<c012d949>] lock_timer_base+0x19/0x35
Jun 25 09:47:56 chr-w-borisov kernel: [32133.636244] [<c012d9a9>] try_to_del_timer_sync+0x44/0x4a
Jun 25 09:47:56 chr-w-borisov kernel: [32133.636248] [<c012d9b9>] del_timer_sync+0xa/0x14
Jun 25 09:47:56 chr-w-borisov kernel: [32133.636252] [<c02e6719>] schedule_timeout+0xa6/0xbb
Jun 25 09:47:56 chr-w-borisov kernel: [32133.636267] [<f88e4c62>] i915_gem_retire_requests+0xf3/0x10b [i915]
Jun 25 09:47:56 chr-w-borisov kernel: [32133.636282] [<f88e5e7a>] i915_gem_idle+0x16d/0x275 [i915]
Jun 25 09:47:56 chr-w-borisov kernel: [32133.636300] [<f88e5fce>] i915_gem_leavevt_ioctl+0x1c/0x2a [i915]
Jun 25 09:47:56 chr-w-borisov kernel: [32133.636325] [<f88205a7>] drm_ioctl+0x1a6/0x21e [drm]
Jun 25 09:47:56 chr-w-borisov kernel: [32133.636348] [<f88e5fb2>] i915_gem_leavevt_ioctl+0x0/0x2a [i915]
Jun 25 09:47:56 chr-w-borisov kernel: [32133.636355] [<c0191186>] vfs_ioctl+0x49/0x5f
Jun 25 09:47:56 chr-w-borisov kernel: [32133.636359] [<c01916c3>] do_vfs_ioctl+0x455/0x490
Jun 25 09:47:56 chr-w-borisov kernel: [32133.636363] [<c012d4df>] run_timer_softirq+0x1a1/0x1b4
Jun 25 09:47:56 chr-w-borisov kernel: [32133.636366] [<c012a27c>] __do_softirq+0x8c/0x115
Jun 25 09:47:56 chr-w-borisov kernel: [32133.636369] [<c019173f>] sys_ioctl+0x41/0x58
Jun 25 09:47:56 chr-w-borisov kernel: [32133.636374] [<c010341b>] sysenter_do_call+0x12/0x2f
Jun 25 09:47:56 chr-w-borisov kernel: [32133.636376] ---[ end trace 6eb10b6c9af82022 ]---
Jun 25 09:47:56 chr-w-borisov kernel: [32133.658857] mtrr: no MTRR for c0000000,10000000 found
---
Thanks,
George.
-- Package-specific info:
** Version:
Linux version 2.6.29-2-686 (Debian 2.6.29-5) (waldi@debian.org) (gcc version 4.3.3 (Debian 4.3.3-10) ) #1 SMP Sun May 17 17:56:29 UTC 2009
** Command line:
root=/dev/sda2 ro
** Not tainted
** Kernel log:
[ 3.800119] usb 3-1: Manufacturer: Logitech
[ 3.800255] usb 3-1: configuration #1 chosen from 1 choice
[ 3.814232] usbcore: registered new interface driver hiddev
[ 3.827177] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input0
[ 3.844088] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1a.0-1/input0
[ 3.844905] usbcore: registered new interface driver usbhid
[ 3.844968] usbhid: v2.6:USB HID core driver
[ 4.040030] usb 3-2: new low speed USB device using uhci_hcd and address 3
[ 4.088327] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.088405] ata1.01: SATA link down (SStatus 4 SControl 300)
[ 4.096319] ata1.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 4.096386] ata1.00: 1953525168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 4.104347] ata1.00: configured for UDMA/133
[ 4.104516] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 4.214907] usb 3-2: New USB device found, idVendor=413c, idProduct=2005
[ 4.214976] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.215046] usb 3-2: Product: DELL USB Keyboard
[ 4.215107] usb 3-2: Manufacturer: DELL
[ 4.215230] usb 3-2: configuration #1 chosen from 1 choice
[ 4.233239] input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input1
[ 4.248080] generic-usb 0003:413C:2005.0002: input,hidraw1: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1a.0-2/input0
[ 4.900068] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.900147] ata2.01: SATA link down (SStatus 4 SControl 300)
[ 4.908257] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GSA-T21N, A102, max UDMA/33
[ 4.908341] ata2.00: applying bridge limits
[ 4.924274] ata2.00: configured for UDMA/33
[ 5.038521] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-T21N A102 PQ: 0 ANSI: 5
[ 5.038750] ata_piix 0000:00:1f.5: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 5.038821] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 5.192103] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 5.192153] scsi2 : ata_piix
[ 5.192286] scsi3 : ata_piix
[ 5.192389] ata3: SATA max UDMA/133 cmd 0xfe40 ctl 0xfe50 bmdma 0xfed0 irq 20
[ 5.192457] ata4: SATA max UDMA/133 cmd 0xfe60 ctl 0xfe70 bmdma 0xfed8 irq 20
[ 5.512056] ata3: SATA link down (SStatus 0 SControl 300)
[ 5.832055] ata4: SATA link down (SStatus 0 SControl 300)
[ 5.843590] Uniform Multi-Platform E-IDE driver
[ 5.951606] Driver 'sd' needs updating - please use bus_type methods
[ 5.951767] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[ 5.951871] sd 0:0:0:0: [sda] Write Protect is off
[ 5.951934] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.951957] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.952118] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[ 5.952218] sd 0:0:0:0: [sda] Write Protect is off
[ 5.952281] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.952303] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.952396] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 5.960665] sda1 sda2 sda3 sda4 < sda5 >
[ 5.975290] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.306864] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 6.306937] Uniform CD-ROM driver Revision: 3.20
[ 6.307106] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.312478] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.312574] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 7.043265] PM: Starting manual resume from disk
[ 7.087737] kjournald starting. Commit interval 5 seconds
[ 7.087813] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.960734] udev: starting version 141
[ 8.181942] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 8.196044] ACPI: Power Button (FF) [PWRF]
[ 8.196185] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 8.212043] ACPI: Power Button (CM) [VBTN]
[ 8.240306] parport_pc 00:06: reported by Plug and Play ACPI
[ 8.240436] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 8.347240] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 8.364884] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 8.420891] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 8.632808] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.633077] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.607718] Adding 4000144k swap on /dev/sda1. Priority:-1 extents:1 across:4000144k
[ 9.738097] EXT3 FS on sda2, internal journal
[ 10.667120] loop: module loaded
[ 10.712765] device-mapper: uevent: version 1.0.3
[ 10.713358] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 11.222348] kjournald starting. Commit interval 5 seconds
[ 11.222687] EXT3 FS on sda3, internal journal
[ 11.222784] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.267147] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 11.268082] SGI XFS Quota Management subsystem
[ 11.297781] XFS mounting filesystem sda5
[ 11.467958] Ending clean XFS mount for filesystem: sda5
[ 12.572669] tg3 0000:02:00.0: PME# disabled
[ 12.572824] tg3 0000:02:00.0: irq 26 for MSI/MSI-X
[ 13.603078] NET: Registered protocol family 10
[ 13.603785] lo: Disabled Privacy Extensions
[ 13.604448] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.808872] tg3: eth0: Link is up at 1000 Mbps, full duplex.
[ 15.808945] tg3: eth0: Flow control is off for TX and off for RX.
[ 15.809429] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.784828] lp0: using parport0 (interrupt-driven).
[ 19.908699] ppdev: user-space parallel port driver
[ 21.619739] [drm] Initialized drm 1.1.0 20060810
[ 21.627813] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 21.627821] pci 0000:00:02.0: setting latency timer to 64
[ 21.629041] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[ 21.629046] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 21.629073] pci 0000:00:02.0: irq 27 for MSI/MSI-X
[ 21.629094] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 26.116025] eth0: no IPv6 routers present
[ 1688.006919] yafc[4117]: segfault at 46 ip b7dfc5bd sp bfa91088 error 4 in libc-2.9.so[b7d9e000+158000]
** Loaded modules:
Module Size Used by
i915 130336 1
drm 133296 2 i915
i2c_algo_bit 4888 1 i915
binfmt_misc 7168 1
ppdev 6224 0
lp 7872 0
ipv6 232468 34
xfs 438052 1
exportfs 3900 1 xfs
dm_snapshot 17444 0
dm_mirror 12468 0
dm_region_hash 10632 1 dm_mirror
dm_log 8588 2 dm_mirror,dm_region_hash
dm_mod 48856 3 dm_snapshot,dm_mirror,dm_log
loop 12988 0
snd_hda_codec_analog 53664 1
snd_hda_intel 22092 0
snd_hda_codec 58808 2 snd_hda_codec_analog,snd_hda_intel
snd_hwdep 6000 1 snd_hda_codec
snd_pcm_oss 31708 0
snd_mixer_oss 12000 1 snd_pcm_oss
snd_pcm 62708 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 2368 0
snd_seq_oss 24756 0
snd_seq_midi 5448 0
snd_rawmidi 18544 1 snd_seq_midi
snd_seq_midi_event 6072 2 snd_seq_oss,snd_seq_midi
snd_seq 42120 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 17808 2 snd_pcm,snd_seq
snd_seq_device 6108 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
i2c_i801 8104 0
snd 48420 12 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
psmouse 36628 0
dcdbas 6728 0
i2c_core 20828 4 i915,drm,i2c_algo_bit,i2c_i801
soundcore 6204 1 snd
pcspkr 2092 0
serio_raw 4544 0
snd_page_alloc 8036 2 snd_hda_intel,snd_pcm
evdev 8160 8
parport_pc 22020 1
parport 30868 3 ppdev,lp,parport_pc
button 5672 0
ext3 107180 2
jbd 42500 1 ext3
mbcache 7180 1 ext3
sg 19940 0
sr_mod 12840 0
cdrom 29804 1 sr_mod
sd_mod 28252 5
crc_t10dif 1616 1 sd_mod
ide_pci_generic 3408 0
ide_core 91812 1 ide_pci_generic
ata_generic 4316 0
usbhid 29132 0
hid 34260 1 usbhid
ata_piix 20092 4
uhci_hcd 19392 0
libata 148892 2 ata_generic,ata_piix
scsi_mod 132076 4 sg,sr_mod,sd_mod,libata
tg3 91040 0
libphy 19424 1 tg3
intel_agp 22548 1
ehci_hcd 29936 0
usbcore 124912 4 usbhid,uhci_hcd,ehci_hcd
agpgart 30624 3 drm,intel_agp
thermal 15092 0
processor 39540 1 thermal
fan 4104 0
thermal_sys 10272 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82Q963/Q965 Memory Controller Hub [8086:2990] (rev 02)
Subsystem: Dell OptiPlex 745 [1028:01da]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82Q963/Q965 Integrated Graphics Controller [8086:2992] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:01da]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 27
Region 0: Memory at dfe00000 (32-bit, non-prefetchable) [size=1M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at ecb8 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:02.1 Display controller [0380]: Intel Corporation 82Q963/Q965 Integrated Graphics Controller [8086:2993] (rev 02)
Subsystem: Dell Device [1028:01da]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at dff00000 (32-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell OptiPlex 745 [1028:01da]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ff20 [size=32]
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell OptiPlex 745 [1028:01da]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff00 [size=32]
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell OptiPlex 745 [1028:01da]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at dfdfbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
Subsystem: Dell OptiPlex 745 [1028:01da]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dfdfc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: dfc00000-dfcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: dfb00000-dfbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell OptiPlex 745 [1028:01da]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at ff80 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell OptiPlex 745 [1028:01da]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff60 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell OptiPlex 745 [1028:01da]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ff40 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell OptiPlex 745 [1028:01da]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at ff980800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev f2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller [8086:2810] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller [8086:2820] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Dell OptiPlex 745 [1028:01da]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 20
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fe10 [size=4]
Region 2: I/O ports at fe20 [size=8]
Region 3: I/O ports at fe30 [size=4]
Region 4: I/O ports at fec0 [size=16]
Region 5: I/O ports at ecc0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
Subsystem: Dell OptiPlex 745 [1028:01da]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 20
Region 0: Memory at dfdfbb00 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at ece0 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE Controller [8086:2825] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Dell OptiPlex 745 [1028:01da]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 20
Region 0: I/O ports at fe40 [size=8]
Region 1: I/O ports at fe50 [size=4]
Region 2: I/O ports at fe60 [size=8]
Region 3: I/O ports at fe70 [size=4]
Region 4: I/O ports at fed0 [size=16]
Region 5: I/O ports at ecd0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5754 Gigabit Ethernet PCI Express [14e4:167a] (rev 02)
Subsystem: Dell OptiPlex 745 [1028:01da]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Region 0: Memory at dfbf0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.29-2-686 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.29-2-686 depends on:
ii debconf [debconf-2.0] 1.5.26 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.3 tools for generating an initramfs
ii module-init-tools 3.9-2 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.29-2-686 recommends:
ii libc6-i686 2.9-16 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.29-2-686 suggests:
ii grub 0.97-53 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.29 <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.29-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.29-2-686/postinst/depmod-error-2.6.29-2-686: false
linux-image-2.6.29-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.29-2-686/preinst/overwriting-modules-2.6.29-2-686: true
linux-image-2.6.29-2-686/postinst/bootloader-error-2.6.29-2-686:
linux-image-2.6.29-2-686/preinst/abort-install-2.6.29-2-686:
linux-image-2.6.29-2-686/postinst/create-kimage-link-2.6.29-2-686: true
linux-image-2.6.29-2-686/preinst/failed-to-move-modules-2.6.29-2-686:
linux-image-2.6.29-2-686/preinst/initrd-2.6.29-2-686:
linux-image-2.6.29-2-686/postinst/old-dir-initrd-link-2.6.29-2-686: true
linux-image-2.6.29-2-686/postinst/old-initrd-link-2.6.29-2-686: true
linux-image-2.6.29-2-686/prerm/removing-running-kernel-2.6.29-2-686: true
linux-image-2.6.29-2-686/postinst/bootloader-test-error-2.6.29-2-686:
linux-image-2.6.29-2-686/postinst/old-system-map-link-2.6.29-2-686: true
linux-image-2.6.29-2-686/preinst/bootloader-initrd-2.6.29-2-686: true
linux-image-2.6.29-2-686/postinst/depmod-error-initrd-2.6.29-2-686: false
linux-image-2.6.29-2-686/preinst/elilo-initrd-2.6.29-2-686: true
linux-image-2.6.29-2-686/prerm/would-invalidate-boot-loader-2.6.29-2-686: true
linux-image-2.6.29-2-686/preinst/lilo-initrd-2.6.29-2-686: true
linux-image-2.6.29-2-686/preinst/abort-overwrite-2.6.29-2-686:
--- End Message ---