--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.30-bpo.1-686: ondemand cpu frequency scaling not working
- From: Paolo Scarabelli <paolo@msw.it>
- Date: Sat, 08 Aug 2009 03:16:27 +0800
- Message-id: <20090807191627.11824.10461.reportbug@neptune.local>
Package: linux-image-2.6.30-bpo.1-686
Version: 2.6.30-3~bpo50+1
Severity: important
The ondemand cpu frequency scaling governor doesn't work (or is not built in
the kernel). I had no problem with previous kernel versions (up to 2.6.29).
The frequency scaling works if I use a different governor (powersave,
userspace, etc) but it doesn't change the frequency automatically anymore.
Sorry if I reported the bug the bug incorrectly or more then once, it's the
first time I use the reportbug tool.
Have a nice day,
Paolo.
-- Package-specific info:
** Version:
Linux version 2.6.30-bpo.1-686 (Debian 2.6.30-3~bpo50+1) (nobse@debian.org) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Sat Jul 18 22:19:04 UTC 2009
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.30-bpo.1-686 root=UUID=73b2ff46-a22b-42af-bfb4-27226a224927 ro
** Tainted: P (1)
** Kernel log:
[ 115.616261] usb-storage: waiting for device to settle before scanning
[ 118.376224] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
[ 120.616176] usb-storage: device scan complete
[ 120.617538] scsi 1:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS
[ 120.720082] Driver 'sd' needs updating - please use bus_type methods
[ 120.724978] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 128.528024] ath0: no IPv6 routers present
[ 129.805419] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 162.460024] ath0: no IPv6 routers present
[ 713.520044] usb 3-2: reset high speed USB device using ehci_hcd and address 4
[ 713.663163] scsi2 : SCSI emulation for USB Mass Storage devices
[ 713.685053] usb-storage: device found at 4
[ 713.685055] usb-storage: waiting for device to settle before scanning
[ 718.684136] usb-storage: device scan complete
[ 718.684693] scsi 2:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS
[ 718.700567] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 1316.472034] usb 3-2: reset high speed USB device using ehci_hcd and address 4
[ 1316.615263] scsi3 : SCSI emulation for USB Mass Storage devices
[ 1316.637337] usb-storage: device found at 4
[ 1316.637338] usb-storage: waiting for device to settle before scanning
[ 1321.636122] usb-storage: device scan complete
[ 1321.636628] scsi 3:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS
[ 1321.648826] sd 3:0:0:0: [sda] Attached SCSI removable disk
[ 6751.060033] usb 3-2: reset high speed USB device using ehci_hcd and address 4
[ 6751.203232] scsi4 : SCSI emulation for USB Mass Storage devices
[ 6751.220448] usb-storage: device found at 4
[ 6751.220450] usb-storage: waiting for device to settle before scanning
[ 7076.948040] usb 3-2: reset high speed USB device using ehci_hcd and address 4
[ 7077.091368] scsi5 : SCSI emulation for USB Mass Storage devices
[ 7077.117362] usb-storage: device found at 4
[ 7077.117364] usb-storage: waiting for device to settle before scanning
[ 7082.116192] usb-storage: device scan complete
[ 7082.117674] scsi 5:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS
[ 7082.124292] sd 5:0:0:0: [sda] Attached SCSI removable disk
[ 9683.383499] usb 3-2: USB disconnect, address 4
[15046.789431] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[15046.789434] vboxdrv: Successfully done.
[15046.789434] vboxdrv: Found 1 processor cores.
[15046.789504] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[15046.792051] vboxdrv: Successfully loaded version 3.0.4 (interface 0x000e0000).
[16197.276054] usb 3-2: new high speed USB device using ehci_hcd and address 5
[16197.409416] usb 3-2: New USB device found, idVendor=0fca, idProduct=8004
[16197.409419] usb 3-2: New USB device strings: Mfr=1, Product=5, SerialNumber=3
[16197.409421] usb 3-2: Product: RIM Composite Device
[16197.409422] usb 3-2: Manufacturer: Research In Motion
[16197.409423] usb 3-2: SerialNumber: 81B7BA9FFFFCA77FA873820D7CC7905BF019F38F
[16197.409489] usb 3-2: configuration #1 chosen from 1 choice
[16197.417704] scsi6 : SCSI emulation for USB Mass Storage devices
[16197.417897] usb-storage: device found at 5
[16197.417898] usb-storage: waiting for device to settle before scanning
[16202.420229] usb-storage: device scan complete
[16202.422679] scsi 6:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS
[16202.429057] sd 6:0:0:0: [sda] Attached SCSI removable disk
[16471.140211] usb 3-2: reset high speed USB device using ehci_hcd and address 5
[16471.283267] scsi7 : SCSI emulation for USB Mass Storage devices
[16471.312068] usb-storage: device found at 5
[16471.312070] usb-storage: waiting for device to settle before scanning
[16476.316383] usb-storage: device scan complete
[16476.318308] scsi 7:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS
[16476.324515] sd 7:0:0:0: [sda] Attached SCSI removable disk
[18386.620339] ondemand governor failed, too long transition latency of HW, fallback to performance governor
[18442.889800] ondemand governor failed, too long transition latency of HW, fallback to performance governor
[18770.788032] usb 3-2: reset high speed USB device using ehci_hcd and address 5
[18770.929375] scsi8 : SCSI emulation for USB Mass Storage devices
[18770.952272] usb-storage: device found at 5
[18770.952274] usb-storage: waiting for device to settle before scanning
[18775.952123] usb-storage: device scan complete
[18775.952666] scsi 8:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS
[18775.964644] sd 8:0:0:0: [sda] Attached SCSI removable disk
[18794.808035] usb 3-2: reset high speed USB device using ehci_hcd and address 5
[18938.865804] usb 3-2: USB disconnect, address 5
[18956.544067] usb 3-2: new high speed USB device using ehci_hcd and address 6
[18956.676381] usb 3-2: New USB device found, idVendor=0fca, idProduct=8004
[18956.676385] usb 3-2: New USB device strings: Mfr=1, Product=5, SerialNumber=3
[18956.676386] usb 3-2: Product: RIM Composite Device
[18956.676387] usb 3-2: Manufacturer: Research In Motion
[18956.676388] usb 3-2: SerialNumber: 81B7BA9FFFFCA77FA873820D7CC7905BF019F38F
[18956.676459] usb 3-2: configuration #1 chosen from 1 choice
[18956.692095] scsi9 : SCSI emulation for USB Mass Storage devices
[18956.696144] usb-storage: device found at 6
[18956.696146] usb-storage: waiting for device to settle before scanning
[18961.696208] usb-storage: device scan complete
[18961.697566] scsi 9:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS
[18961.704894] sd 9:0:0:0: [sda] Attached SCSI removable disk
[18964.769080] sd 9:0:0:0: [sda] 15724544 512-byte hardware sectors: (8.05 GB/7.49 GiB)
[18964.769575] sd 9:0:0:0: [sda] Assuming drive cache: write through
[18964.770952] sd 9:0:0:0: [sda] Assuming drive cache: write through
[18964.770956] sda: sda1
[18967.333333] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[19069.372037] usb 3-2: reset high speed USB device using ehci_hcd and address 6
[19069.515083] scsi10 : SCSI emulation for USB Mass Storage devices
[19069.548066] usb-storage: device found at 6
[19069.548068] usb-storage: waiting for device to settle before scanning
[19224.380030] usb 3-2: reset high speed USB device using ehci_hcd and address 6
[19224.523166] scsi11 : SCSI emulation for USB Mass Storage devices
[19224.681225] usb-storage: device found at 6
[19224.681227] usb-storage: waiting for device to settle before scanning
[19229.680251] usb-storage: device scan complete
[19229.681611] scsi 11:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS
[19229.685500] sd 11:0:0:0: [sda] Attached SCSI removable disk
** Loaded modules:
Module Size Used by
nls_utf8 1488 0
nls_cp437 5320 0
vfat 8672 0
fat 41464 1 vfat
nls_base 6416 4 nls_utf8,nls_cp437,vfat,fat
vboxnetadp 66816 0
vboxnetflt 72288 0
vboxdrv 102512 1 vboxnetflt
wlan_tkip 9664 3
sd_mod 28688 0
crc_t10dif 1632 1 sd_mod
usb_storage 48432 0
radeon 122668 2
drm 137724 3 radeon
binfmt_misc 7088 1
rfcomm 30308 2
l2cap 18128 9 rfcomm
bluetooth 46996 4 rfcomm,l2cap
tun 11180 0
ppdev 6368 0
lp 8012 0
fuse 47560 1
dm_crypt 11032 0
dm_mod 49832 1 dm_crypt
option 20068 0
usbserial 27396 1 option
cpufreq_userspace 2740 0
cpufreq_stats 3520 0
cpufreq_powersave 1292 0
cpufreq_conservative 6256 0
p4_clockmod 3948 0
speedstep_lib 4136 1 p4_clockmod
firewire_sbp2 12628 0
loop 13292 0
wlan_scan_sta 9864 1
joydev 8576 0
ath_rate_sample 9692 1
ath_pci 74560 0
wlan 169056 5 wlan_tkip,wlan_scan_sta,ath_rate_sample,ath_pci
ath_hal 191856 3 ath_rate_sample,ath_pci
pcmcia 24288 0
snd_ali5451 16204 1
irtty_sir 4228 2
sir_dev 10884 1 irtty_sir
irda 95712 1 sir_dev
snd_ac97_codec 91188 1 snd_ali5451
ac97_bus 1456 1 snd_ac97_codec
crc_ccitt 1816 1 irda
snd_pcm_oss 32240 0
snd_mixer_oss 12372 1 snd_pcm_oss
snd_pcm 62424 3 snd_ali5451,snd_ac97_codec,snd_pcm_oss
psmouse 37496 0
serio_raw 4560 0
parport_pc 22392 1
parport 31144 3 ppdev,lp,parport_pc
evdev 8032 7
i2c_ali1535 5224 0
snd_seq_midi 5688 0
i2c_ali15x3 5752 0
snd_rawmidi 18596 1 snd_seq_midi
i2c_core 20808 3 drm,i2c_ali1535,i2c_ali15x3
pcspkr 2104 0
snd_seq_midi_event 6212 1 snd_seq_midi
container 3244 0
snd_seq 42316 2 snd_seq_midi,snd_seq_midi_event
snd_timer 17440 2 snd_pcm,snd_seq
snd_seq_device 6136 3 snd_seq_midi,snd_rawmidi,snd_seq
video 18008 0
output 2604 1 video
snd 49076 11 snd_ali5451,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
processor 34432 1
button 5060 0
battery 6012 0
ac 2960 0
yenta_socket 21172 2
rsrc_nonstatic 9664 1 yenta_socket
pcmcia_core 31144 3 pcmcia,yenta_socket,rsrc_nonstatic
soundcore 6184 1 snd
snd_page_alloc 8120 1 snd_pcm
ati_agp 5960 1
shpchp 26648 0
agpgart 30856 2 drm,ati_agp
pci_hotplug 24400 1 shpchp
ext3 106872 1
jbd 40860 1 ext3
mbcache 6928 1 ext3
ide_cd_mod 24452 0
cdrom 30324 1 ide_cd_mod
ide_gd_mod 19816 3
ide_pci_generic 3632 0
usbhid 31472 0
hid 34464 1 usbhid
alim15x3 6432 2
ide_core 87856 4 ide_cd_mod,ide_gd_mod,ide_pci_generic,alim15x3
ata_generic 4340 0
libata 150744 1 ata_generic
ehci_hcd 29444 0
uhci_hcd 19076 0
firewire_ohci 18924 0
natsemi 23512 0
firewire_core 37612 2 firewire_sbp2,firewire_ohci
crc_itu_t 2148 1 firewire_core
scsi_mod 131584 4 sd_mod,usb_storage,firewire_sbp2,libata
usbcore 125712 7 usb_storage,option,usbserial,usbhid,ehci_hcd,uhci_hcd
floppy 46212 0
thermal 12576 0
fan 4044 0
thermal_sys 13140 4 video,processor,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc RS200/RS200M AGP Bridge [IGP 340M] [1002:cbb2] (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: Memory at d4000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at d0009000 (32-bit, prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: agpgart-ati
Kernel modules: ati-agp
00:01.0 PCI bridge [0604]: ATI Technologies Inc PCI Bridge [IGP 340M] [1002:7010] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 00009000-00009fff
Memory behind bridge: d0300000-d03fffff
Prefetchable memory behind bridge: d8000000-dfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:06.0 Multimedia audio controller [0401]: ALi Corporation M5451 PCI AC-Link Controller Audio Device [10b9:5451] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:0850]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR+ <PERR+ INTx-
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 1000 [size=256]
Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ALI 5451
Kernel modules: snd-ali5451
00:07.0 ISA bridge [0601]: ALi Corporation M1533/M1535/M1543 PCI to ISA Bridge [Aladdin IV/V/V+] [10b9:1533]
Subsystem: ALi Corporation ALi M1533 Aladdin IV/V ISA Bridge [10b9:1533]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: alim1535_wdt, alim7101_wdt
00:08.0 Modem [0703]: ALi Corporation M5457 AC'97 Modem Controller [10b9:5457] (prog-if 00 [Generic])
Subsystem: Hewlett-Packard Company Device [103c:0850]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0001000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 1400 [size=256]
Capabilities: <access denied>
00:0a.0 CardBus bridge [0607]: Texas Instruments PCI1410 PC card Cardbus Controller [104c:ac50] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0002000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 50000000-53fff000 (prefetchable)
Memory window 1: 54000000-57fff000
I/O window 0: 00001800-000018ff
I/O window 1: 00001c00-00001cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
00:0b.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 50) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:0850]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at 2000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:0b.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 50) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:0850]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 2020 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:0b.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 51) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:0850]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 128 bytes
Interrupt: pin C routed to IRQ 11
Region 0: Memory at d0003000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:0c.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) [104c:8026] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:0850]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0003800 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at d0004000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
00:10.0 IDE interface [0101]: ALi Corporation M5229 IDE [10b9:5229] (rev c4) (prog-if fa)
Subsystem: Hewlett-Packard Company Device [103c:0850]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at 2040 [size=16]
Capabilities: <access denied>
Kernel driver in use: ALI15x3_IDE
Kernel modules: alim15x3
00:11.0 Bridge [0680]: ALi Corporation M7101 Power Management Controller [PMU] [10b9:7101]
Subsystem: Hewlett-Packard Company Device [103c:0850]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: ali1535_smbus
Kernel modules: alim7101_wdt, i2c-ali1535, i2c-ali15x3
00:12.0 Ethernet controller [0200]: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller [100b:0020]
Subsystem: Hewlett-Packard Company Device [103c:0850]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 90 (2750ns min, 13000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 2400 [size=256]
Region 1: Memory at d0008000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 58000000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: natsemi
Kernel modules: natsemi
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon IGP 330M/340M/350M [1002:4337] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Radeon IGP 345M [103c:0850]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B+ DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at d0300000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at d0320000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: radeonfb
02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5212/AR5213 Multiprotocol MAC/baseband processor [168c:0013] (rev 01)
Subsystem: Device [821f:81b9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 54000000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath_pci
Kernel modules: ath5k, ath_pci
-- System Information:
Debian Release: 5.0.2
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.30-bpo.1-686 (SMP w/1 CPU core)
Locale: LANG=en_SG.UTF-8, LC_CTYPE=en_SG.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.30-bpo.1-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.30-bpo.1-686 recommends:
ii libc6-i686 2.9-12 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.30-bpo.1-686 suggests:
ii grub-pc [grub] 1.96+20080724-16 GRand Unified Bootloader, version
pn linux-doc-2.6.30 <none> (no description available)
-- debconf information:
linux-image-2.6.30-bpo.1-686/postinst/create-kimage-link-2.6.30-bpo.1-686: true
linux-image-2.6.30-bpo.1-686/prerm/would-invalidate-boot-loader-2.6.30-bpo.1-686: true
linux-image-2.6.30-bpo.1-686/preinst/elilo-initrd-2.6.30-bpo.1-686: true
linux-image-2.6.30-bpo.1-686/preinst/initrd-2.6.30-bpo.1-686:
linux-image-2.6.30-bpo.1-686/postinst/old-system-map-link-2.6.30-bpo.1-686: true
linux-image-2.6.30-bpo.1-686/preinst/bootloader-initrd-2.6.30-bpo.1-686: true
linux-image-2.6.30-bpo.1-686/preinst/lilo-initrd-2.6.30-bpo.1-686: true
linux-image-2.6.30-bpo.1-686/postinst/depmod-error-initrd-2.6.30-bpo.1-686: false
linux-image-2.6.30-bpo.1-686/postinst/depmod-error-2.6.30-bpo.1-686: false
linux-image-2.6.30-bpo.1-686/preinst/abort-install-2.6.30-bpo.1-686:
linux-image-2.6.30-bpo.1-686/preinst/failed-to-move-modules-2.6.30-bpo.1-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.30-bpo.1-686/postinst/old-dir-initrd-link-2.6.30-bpo.1-686: true
linux-image-2.6.30-bpo.1-686/postinst/bootloader-test-error-2.6.30-bpo.1-686:
linux-image-2.6.30-bpo.1-686/preinst/abort-overwrite-2.6.30-bpo.1-686:
linux-image-2.6.30-bpo.1-686/prerm/removing-running-kernel-2.6.30-bpo.1-686: true
* linux-image-2.6.30-bpo.1-686/preinst/overwriting-modules-2.6.30-bpo.1-686: false
linux-image-2.6.30-bpo.1-686/postinst/bootloader-error-2.6.30-bpo.1-686:
linux-image-2.6.30-bpo.1-686/postinst/old-initrd-link-2.6.30-bpo.1-686: true
linux-image-2.6.30-bpo.1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.30-bpo.1-686/postinst/kimage-is-a-directory:
--- End Message ---