Bug#513050: linux-image-2.6.26-1-686: Kernel Oops when reconnecting external usb soundcard
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: Bug#513050: linux-image-2.6.26-1-686: Kernel Oops when reconnecting external usb soundcard
- From: Florian <flad@gmx.at>
- Date: Sun, 25 Jan 2009 23:52:30 +0100
- Message-id: <20090125225230.7560.47773.reportbug@arne.castle>
- Reply-to: Florian <flad@gmx.at>, 513050@bugs.debian.org
Package: linux-image-2.6.26-1-686
Version: 2.6.26-13
Severity: important
Kernel Oops when switching off and on again an external soundcard
(M-Audio Audiophile USB) while pulseaudio is running. Happens
regularly because the soundcard often needs a hard reset.
[ 3401.628008] usb 2-1: USB disconnect, address 3
[ 3401.653919] BUG: unable to handle kernel NULL pointer dereference at
00000008
[ 3401.653927] IP: [<f89aacc0>] :usbcore:hcd_buffer_free+0x10/0x63
[ 3401.653963] *pde = 00000000
[ 3401.653968] Oops: 0000 [#1] SMP
[ 3401.653971] Modules linked in: snd_usb_audio snd_usb_lib radeon drm
ppdev lp ipv6 battery binfmt_misc cpufreq_conservative cpufreq_powersave
cpufreq_userspace cpufreq_ondemand cpufreq_stats freq_table fuse sbp2
loop sd_mod usbhid hid ff_memless snd_intel8x0 snd_mpu401 snd_ac97_codec
ac97_bus snd_cs4232 3c59x sata_sil mii snd_opl3_lib snd_hwdep
snd_cs4231_lib snd_seq_dummy snd_pcm_oss snd_mixer_oss snd_pcm
snd_mpu401_uart ns558 gameport parport_pc parport snd_seq_oss
snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq floppy pcspkr
snd_timer snd_seq_device snd ohci1394 ieee1394 soundcore snd_page_alloc
shpchp pci_hotplug forcedeth ehci_hcd ohci_hcd button usbcore
i2c_nforce2 i2c_core nvidia_agp agpgart evdev ext3 jbd mbcache
sha256_generic aes_i586 aes_generic cbc dm_crypt crypto_blkcipher
dm_mirror dm_log dm_snapshot dm_mod ide_cd_mod cdrom thermal processor
fan thermal_sys ide_disk ide_pci_generic amd74xx ide_core ata_generic
libata scsi_mod dock
[ 3401.654035]
[ 3401.654038] Pid: 3662, comm: pulseaudio Not tainted (2.6.26-1-686 #1)
[ 3401.654042] EIP: 0060:[<f89aacc0>] EFLAGS: 00010282 CPU: 0
[ 3401.654060] EIP is at hcd_buffer_free+0x10/0x63 [usbcore]
[ 3401.654063] EAX: 00000008 EBX: 00000008 ECX: 37f84040 EDX: f7f84040
[ 3401.654066] ESI: 00000010 EDI: eda841c0 EBP: ebcb7900 ESP: ecbd3ec8
[ 3401.654069] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 3401.654073] Process pulseaudio (pid: 3662, ti=ecbd2000 task=f7cdeca0
task.ti=ecbd2000)
[ 3401.654075] Stack: eda842c0 f1989000 f8c5d9c8 37f84040 eda84210
00000000 f8c5da21 eed6a24c
[ 3401.654083] eed6a1a0 00001fff f89f61be ecb33be0 ed50a800
f897485d 00001000 ed50a800
[ 3401.654089] f89748be ed50a800 ed50a800 ebcb7900 f89715a9
ed568860 f8971f90 eed6a0a0
[ 3401.654096] Call Trace:
[ 3401.654102] [<f8c5d9c8>] snd_usbmidi_out_endpoint_delete+0x20/0x32
[snd_usb_lib]
[ 3401.654114] [<f8c5da21>] snd_usbmidi_free+0x15/0x34 [snd_usb_lib]
[ 3401.654123] [<f89f61be>] snd_rawmidi_free+0x68/0x74 [snd_rawmidi]
[ 3401.654136] [<f897485d>] snd_device_free+0x56/0x8a [snd]
[ 3401.654157] [<f89748be>] snd_device_free_all+0x2d/0x4b [snd]
[ 3401.654171] [<f89715a9>] snd_card_do_free+0x38/0x9c [snd]
[ 3401.654183] [<f8971f90>] snd_card_file_remove+0xb1/0xd6 [snd]
[ 3401.654196] [<f8a4e3a5>] snd_pcm_release+0x84/0x8e [snd_pcm]
[ 3401.654221] [<f8971e1b>] snd_disconnect_release+0x57/0x5a [snd]
[ 3401.654233] [<c01750f3>] __fput+0x8a/0x135
[ 3401.654244] [<c0165794>] remove_vma+0x25/0x43
[ 3401.654254] [<c0166124>] do_munmap+0x181/0x19b
[ 3401.654267] [<c016616e>] sys_munmap+0x30/0x3e
[ 3401.654273] [<c0103853>] sysenter_past_esp+0x78/0xb1
[ 3401.654295] =======================
[ 3401.654297] Code: eb 05 bf ed ff ff ff b8 6c de 9b f8 e8 be 9b 78 c7
89 f8 5b 5e 5f 5d c3 90 90 90 56 89 d6 89 ca 85 d2 53 89 c3 8b 4c 24 0c
74 50 <8b> 00 83 b8 e8 00 00 00 00 75 15 8b 83 b0 00 00 00 f6 40 10 02
[ 3401.654328] EIP: [<f89aacc0>] hcd_buffer_free+0x10/0x63 [usbcore]
SS:ESP 0068:ecbd3ec8
[ 3401.654348] ---[ end trace bee24b80efb66c5a ]---
[ 3408.628032] usb 2-1: new full speed USB device using ohci_hcd and
address 4
[ 3408.880544] usb 2-1: config 1 interface 5 has no altsetting 3
[ 3408.891634] usb 2-1: configuration #1 chosen from 1 choice
[ 3409.164975] usb 2-1: New USB device found, idVendor=0763,
idProduct=2003
[ 3409.164982] usb 2-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3409.164985] usb 2-1: Product: Audiophile USB (tm)
[ 3409.164988] usb 2-1: Manufacturer: M-Audio
-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.26-1-686 root=/dev/mapper/hda2_crypt ro
** Not tainted
** Kernel log:
[ 61.788310] hub 3-0:1.0: USB hub found
[ 61.788365] hub 3-0:1.0: 6 ports detected
[ 61.892149] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 61.892206] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 61.892263] usb usb3: Product: EHCI Host Controller
[ 61.892309] usb usb3: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
[ 61.892357] usb usb3: SerialNumber: 0000:00:02.2
[ 61.892855] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 21
[ 61.892905] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCM] -> GSI 21 (level, high) -> IRQ 21
[ 61.893080] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 61.944891] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[ea084000-ea0847ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 61.950096] usb 2-2: USB disconnect, address 3
[ 62.058974] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 62.184099] parport_pc 00:0c: reported by Plug and Play ACPI
[ 62.184210] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 62.323276] gameport: NS558 PnP Gameport is pnp00:0f/gameport0, io 0x201, speed 59659kHz
[ 62.623389] ACPI: PCI Interrupt Link [AP3C] enabled at IRQ 20
[ 62.623445] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [AP3C] -> GSI 20 (level, high) -> IRQ 20
[ 62.623575] 3c59x: Donald Becker and others.
[ 62.623625] 0000:02:01.0: 3Com PCI 3c920 Tornado at f8a18000.
[ 62.664579] sata_sil 0000:01:0b.0: version 2.3
[ 62.664832] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 62.664889] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 18
[ 62.672915] scsi0 : sata_sil
[ 62.682117] scsi1 : sata_sil
[ 62.682232] ata1: SATA max UDMA/100 mmio m512@0xe9000000 tf 0xe9000080 irq 18
[ 62.682284] ata2: SATA max UDMA/100 mmio m512@0xe9000000 tf 0xe90000c0 irq 18
[ 62.770184] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 62.770240] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 22 (level, high) -> IRQ 22
[ 62.770387] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 62.820058] usb 2-1: new full speed USB device using ohci_hcd and address 4
[ 63.024037] ata1: SATA link down (SStatus 0 SControl 310)
[ 63.165489] ohci1394: fw-host0: SelfID received outside of bus reset sequence
[ 63.165586] usb 2-1: config 1 interface 5 has no altsetting 3
[ 63.165669] intel8x0_measure_ac97_clock: measured 126434 usecs
[ 63.165718] intel8x0: clocking to 48000
[ 63.176002] usb 2-1: configuration #1 chosen from 1 choice
[ 63.184003] usb 2-1: New USB device found, idVendor=0763, idProduct=2003
[ 63.184003] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 63.184064] usb 2-1: Product: Audiophile USB (tm)
[ 63.184110] usb 2-1: Manufacturer: M-Audio
[ 63.348058] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 63.404176] ata2.00: ATA-7: ST3320620AS, 3.AAC, max UDMA/133
[ 63.404231] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 63.436317] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180000456abb]
[ 63.479144] ata2.00: configured for UDMA/100
[ 63.479322] scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
[ 63.488053] usb 2-2: new low speed USB device using ohci_hcd and address 5
[ 63.701604] usb 2-2: configuration #1 chosen from 1 choice
[ 63.704670] usb 2-2: New USB device found, idVendor=045e, idProduct=0040
[ 63.704726] usb 2-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 63.704776] usb 2-2: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[ 63.704825] usb 2-2: Manufacturer: Microsoft
[ 63.952136] usbcore: registered new interface driver snd-usb-audio
[ 63.957364] usbcore: registered new interface driver hiddev
[ 63.962943] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input4
[ 63.988108] input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.1-2
[ 63.988323] usbcore: registered new interface driver usbhid
[ 63.988372] usbhid: v2.6:USB HID core driver
[ 64.896820] Driver 'sd' needs updating - please use bus_type methods
[ 64.896995] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 64.897066] sd 1:0:0:0: [sda] Write Protect is off
[ 64.897114] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 64.897150] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 64.897279] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 64.897346] sd 1:0:0:0: [sda] Write Protect is off
[ 64.897394] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 64.897426] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 64.897489] sda: sda1
[ 64.918453] sd 1:0:0:0: [sda] Attached SCSI disk
[ 66.499187] EXT3 FS on dm-0, internal journal
[ 66.610078] loop: module loaded
[ 74.515427] kjournald starting. Commit interval 5 seconds
[ 74.515427] EXT3 FS on hda1, internal journal
[ 74.515427] EXT3-fs: mounted filesystem with ordered data mode.
[ 74.542598] kjournald starting. Commit interval 5 seconds
[ 74.544172] EXT3 FS on dm-4, internal journal
[ 74.544252] EXT3-fs: mounted filesystem with ordered data mode.
[ 74.592744] Adding 2931336k swap on /dev/mapper/hda5_crypt. Priority:-1 extents:1 across:2931336k
[ 75.063726] fuse init (API version 7.9)
[ 77.252977] NET: Registered protocol family 10
[ 77.253553] lo: Disabled Privacy Extensions
[ 87.484005] eth0: no IPv6 routers present
[ 95.044705] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 96.852703] lp0: using parport0 (interrupt-driven).
[ 96.897317] ppdev: user-space parallel port driver
[ 97.082199] eth1: setting half-duplex.
[ 97.083232] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 98.910754] [drm] Initialized drm 1.1.0 20060810
[ 98.922528] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 98.922543] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 19
[ 98.922627] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 100.563965] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 100.563994] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 100.564084] agpgart: Putting AGP V3 device at 0000:03:00.0 into 8x mode
[ 100.960006] [drm] Setting GART location based on new memory map
[ 100.960006] [drm] Loading R300 Microcode
[ 100.960006] [drm] Num pipes: 1
[ 100.960006] [drm] writeback test succeeded in 1 usecs
[ 111.772018] eth0: no IPv6 routers present
** Loaded modules:
Module Size Used by
radeon 118688 2
drm 65256 3 radeon
ppdev 6468 0
lp 8164 0
battery 10180 0
binfmt_misc 7528 1
cpufreq_conservative 5960 0
cpufreq_powersave 1856 0
cpufreq_userspace 3172 0
cpufreq_ondemand 6476 0
cpufreq_stats 3776 0
freq_table 4224 2 cpufreq_ondemand,cpufreq_stats
ipv6 235300 22
fuse 42908 1
sbp2 18572 0
loop 12748 0
sd_mod 22200 2
usbhid 35904 0
hid 33184 1 usbhid
ff_memless 4392 1 usbhid
snd_usb_audio 70272 0
snd_usb_lib 13440 1 snd_usb_audio
snd_mpu401 6152 0
snd_intel8x0 26268 2
snd_ac97_codec 88484 1 snd_intel8x0
ac97_bus 1728 1 snd_ac97_codec
sata_sil 7176 2
3c59x 35624 0
mii 4896 1 3c59x
snd_seq_dummy 2660 0
snd_cs4232 11380 0
snd_opl3_lib 9344 1 snd_cs4232
snd_hwdep 6212 2 snd_usb_audio,snd_opl3_lib
snd_cs4231_lib 20512 1 snd_cs4232
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
snd_pcm 62596 5 snd_usb_audio,snd_intel8x0,snd_ac97_codec,snd_cs4231_lib,snd_pcm_oss
snd_mpu401_uart 6368 2 snd_mpu401,snd_cs4232
ns558 3712 0
gameport 10700 2 ns558
parport_pc 22500 1
parport 30988 3 ppdev,lp,parport_pc
snd_seq_oss 24992 0
snd_seq_midi 5728 0
snd_rawmidi 18496 3 snd_usb_lib,snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi
snd_seq 41456 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
floppy 47716 0
pcspkr 2432 0
snd_timer 17800 4 snd_opl3_lib,snd_cs4231_lib,snd_pcm,snd_seq
snd_seq_device 6380 6 snd_seq_dummy,snd_opl3_lib,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 45604 21 snd_usb_audio,snd_mpu401,snd_intel8x0,snd_ac97_codec,snd_cs4232,snd_opl3_lib,snd_hwdep,snd_cs4231_lib,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
ohci1394 24944 0
ieee1394 75800 2 sbp2,ohci1394
soundcore 6368 1 snd
snd_page_alloc 7816 3 snd_intel8x0,snd_cs4231_lib,snd_pcm
shpchp 25528 0
pci_hotplug 23460 1 shpchp
ehci_hcd 28428 0
forcedeth 45072 0
ohci_hcd 18500 0
button 6096 0
usbcore 118160 6 usbhid,snd_usb_audio,snd_usb_lib,ehci_hcd,ohci_hcd
i2c_nforce2 5536 0
i2c_core 19828 1 i2c_nforce2
nvidia_agp 6108 1
agpgart 28776 2 drm,nvidia_agp
evdev 8000 3
ext3 105512 3
jbd 39444 1 ext3
mbcache 7108 1 ext3
sha256_generic 11360 0
aes_i586 7744 8
aes_generic 29256 1 aes_i586
cbc 3264 4
dm_crypt 11172 1
crypto_blkcipher 15236 6 cbc,dm_crypt
dm_mirror 15104 0
dm_log 8452 1 dm_mirror
dm_snapshot 14340 0
dm_mod 46184 15 dm_crypt,dm_mirror,dm_log,dm_snapshot
ide_cd_mod 27652 0
cdrom 30176 1 ide_cd_mod
thermal 15228 0
processor 32576 1 thermal
fan 4164 0
thermal_sys 10856 3 thermal,processor,fan
ide_disk 10496 5
ide_pci_generic 3908 0 [permanent]
amd74xx 7752 0 [permanent]
ide_core 96168 4 ide_cd_mod,ide_disk,ide_pci_generic,amd74xx
ata_generic 4676 0
libata 140384 2 sata_sil,ata_generic
scsi_mod 129356 3 sbp2,sd_mod,libata
dock 8304 1 libata
** PCI devices:
00:00.0 Host bridge [0600]: nVidia Corporation nForce2 IGP2 [10de:01e0] (rev c1)
Subsystem: ASUSTeK Computer Inc. Device [1043:80ac]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-nvidia
Kernel modules: nvidia-agp
00:00.1 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 1 [10de:01eb] (rev c1)
Subsystem: ASUSTeK Computer Inc. Device [1043:80ac]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.2 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 4 [10de:01ee] (rev c1)
Subsystem: ASUSTeK Computer Inc. Device [1043:80ac]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.3 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 3 [10de:01ed] (rev c1)
Subsystem: ASUSTeK Computer Inc. Device [1043:80ac]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.4 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 2 [10de:01ec] (rev c1)
Subsystem: ASUSTeK Computer Inc. Device [1043:80ac]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.5 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 5 [10de:01ef] (rev c1)
Subsystem: ASUSTeK Computer Inc. Device [1043:80ac]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.0 ISA bridge [0601]: nVidia Corporation nForce2 ISA Bridge [10de:0060] (rev a4)
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard [1043:80ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.1 SMBus [0c05]: nVidia Corporation nForce2 SMBus (MCP) [10de:0064] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:0c11]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at dc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2
00:02.0 USB Controller [0c03]: nVidia Corporation nForce2 USB Controller [10de:0067] (rev a4) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard [1043:0c11]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at ea087000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:02.1 USB Controller [0c03]: nVidia Corporation nForce2 USB Controller [10de:0067] (rev a4) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard [1043:0c11]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at ea082000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:02.2 USB Controller [0c03]: nVidia Corporation nForce2 USB Controller [10de:0068] (rev a4) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard [1043:0c11]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin C routed to IRQ 22
Region 0: Memory at ea083000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:04.0 Ethernet controller [0200]: nVidia Corporation nForce2 Ethernet Controller [10de:0066] (rev a1)
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard onboard nForce2 Ethernet [1043:80a7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at ea086000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at e000 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:05.0 Multimedia audio controller [0401]: nVidia Corporation nForce Audio Processing Unit [10de:006b] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:0c11]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 3000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at ea000000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:06.0 Multimedia audio controller [0401]: nVidia Corporation nForce2 AC97 Audio Controler (MCP) [10de:006a] (rev a1)
Subsystem: ASUSTeK Computer Inc. nForce2 AC97 Audio Controler (MCP) [1043:8095]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at e400 [size=256]
Region 1: I/O ports at d000 [size=128]
Region 2: Memory at ea080000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
00:08.0 PCI bridge [0604]: nVidia Corporation nForce2 External PCI Bridge [10de:006c] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00009000-0000afff
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: 50000000-500fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:09.0 IDE interface [0101]: nVidia Corporation nForce2 IDE [10de:0065] (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:0c11]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at f000 [size=16]
Capabilities: <access denied>
Kernel driver in use: AMD_IDE
Kernel modules: amd74xx
00:0c.0 PCI bridge [0604]: nVidia Corporation nForce2 PCI Bridge [10de:006d] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: e4000000-e5ffffff
Prefetchable memory behind bridge: 50100000-501fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:0d.0 FireWire (IEEE 1394) [0c00]: nVidia Corporation nForce2 FireWire (IEEE 1394) Controller [10de:006e] (rev a3) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:809a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at ea084000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at ea085000 (32-bit, non-prefetchable) [size=64]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
00:1e.0 PCI bridge [0604]: nVidia Corporation nForce2 AGP [10de:01e8] (rev c1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e6000000-e7ffffff
Prefetchable memory behind bridge: c0000000-dfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
01:0b.0 RAID bus controller [0104]: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid] Serial ATA Controller [1095:3112] (rev 02)
Subsystem: Silicon Image, Inc. SiI 3112 SATARaid Controller [1095:6112]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 9000 [size=8]
Region 1: I/O ports at 9400 [size=4]
Region 2: I/O ports at 9800 [size=8]
Region 3: I/O ports at 9c00 [size=4]
Region 4: I/O ports at a000 [size=16]
Region 5: Memory at e9000000 (32-bit, non-prefetchable) [size=512]
[virtual] Expansion ROM at 50000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: sata_sil
Kernel modules: sata_sil
02:01.0 Ethernet controller [0200]: 3Com Corporation 3C920B-EMB Integrated Fast Ethernet Controller [Tornado] [10b7:9201] (rev 40)
Subsystem: ASUSTeK Computer Inc. A7N8X Deluxe onboard 3C920B-EMB Integrated Fast Ethernet Controller [1043:80ab]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at b000 [size=128]
Region 1: Memory at e5000000 (32-bit, non-prefetchable) [size=128]
[virtual] Expansion ROM at 50100000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: 3c59x
Kernel modules: 3c59x
03:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 AP [Radeon 9600] [1002:4150] (prog-if 00 [VGA controller])
Subsystem: Connect Components Ltd Radeon 9600 256Mb Primary [17ee:2002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at c000 [size=256]
Region 2: Memory at e7000000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at e6000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: radeonfb
03:00.1 Display controller [0380]: ATI Technologies Inc RV350 AP [Radeon 9600] (Secondary) [1002:4170]
Subsystem: Connect Components Ltd Radeon 9600 256Mb (Secondary) [17ee:2003]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at d0000000 (32-bit, prefetchable) [disabled] [size=256M]
Region 1: Memory at e7010000 (32-bit, non-prefetchable) [disabled] [size=64K]
Capabilities: <access denied>
-- System Information:
Debian Release: 5.0
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-1-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub-pc [grub] 1.96+20080724-12 GRand Unified Bootloader, version
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information excluded
Reply to: