linux-modules-extra-2.6-etchnhalf_2.6.24-6~etchnhalf.1_arm.changes is NEW
(new) atl2-modules-2.6-footbridge-etchnhalf_2.6.24-6~etchnhalf.1_arm.deb optional admin
Driver for the Atheros L2 Fast Ethernet Adapter modules for Linux 2.6 on Footbridge based
This package depends on the Driver for the Atheros L2 Fast Ethernet
Adapter modules for latest Linux kernel 2.6 on Footbridge (CATS,
Netwinder) machines.
.
atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter.
The the Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost
Asus laptop systems, such as the Asus Eee PC.
(new) atl2-modules-2.6-iop32x-etchnhalf_2.6.24-6~etchnhalf.1_arm.deb optional admin
Driver for the Atheros L2 Fast Ethernet Adapter modules for Linux 2.6 on IOP32x
This package depends on the Driver for the Atheros L2 Fast Ethernet
Adapter modules for latest Linux kernel 2.6 on IOP32x based (Thecus N2100,
etc) machines.
.
atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter.
The the Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost
Asus laptop systems, such as the Asus Eee PC.
(new) atl2-modules-2.6-ixp4xx-etchnhalf_2.6.24-6~etchnhalf.1_arm.deb optional admin
Driver for the Atheros L2 Fast Ethernet Adapter modules for Linux 2.6 on IXP4xx
This package depends on the Driver for the Atheros L2 Fast Ethernet
Adapter modules for latest Linux kernel 2.6 on IXP4xx based (Linksys
NSLU2, etc) machines.
.
atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter.
The the Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost
Asus laptop systems, such as the Asus Eee PC.
(new) atl2-modules-2.6.24-etchnhalf.1-footbridge_2.6.24+2.0.3-6~etchnhalf.1_arm.deb optional admin
Driver for the Atheros L2 Fast Ethernet Adapter modules for Linux 2.6.24 on Footbridge based
This package provides the Driver for the Atheros L2 Fast Ethernet Adapter
modules for the Linux kernel version 2.6.24 on Footbridge (CATS,
Netwinder) machines.
.
atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter.
The the Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost
Asus laptop systems, such as the Asus Eee PC.
(new) atl2-modules-2.6.24-etchnhalf.1-iop32x_2.6.24+2.0.3-6~etchnhalf.1_arm.deb optional admin
Driver for the Atheros L2 Fast Ethernet Adapter modules for Linux 2.6.24 on IOP32x
This package provides the Driver for the Atheros L2 Fast Ethernet Adapter
modules for the Linux kernel version 2.6.24 on IOP32x based (Thecus N2100,
etc) machines.
.
atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter.
The the Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost
Asus laptop systems, such as the Asus Eee PC.
(new) atl2-modules-2.6.24-etchnhalf.1-ixp4xx_2.6.24+2.0.3-6~etchnhalf.1_arm.deb optional admin
Driver for the Atheros L2 Fast Ethernet Adapter modules for Linux 2.6.24 on IXP4xx
This package provides the Driver for the Atheros L2 Fast Ethernet Adapter
modules for the Linux kernel version 2.6.24 on IXP4xx based (Linksys
NSLU2, etc) machines.
.
atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter.
The the Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost
Asus laptop systems, such as the Asus Eee PC.
(new) loop-aes-modules-2.6-footbridge-etchnhalf_2.6.24-6~etchnhalf.1_arm.deb optional admin
loop-AES encryption modules for Linux 2.6 on Footbridge based
This package depends on the loop-AES encryption modules for latest Linux
kernel 2.6 on Footbridge (CATS, Netwinder) machines.
.
The loop-AES encryption modules provide support for symmetric-key
encryption of block devices. They are typically used to encrypt disk
partitions and swap space.
.
Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded
MD5 IV. Compatibility options are provided to access encrypted devices
using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2.
.
You will need to install the package loop-aes-utils to use the loop-AES
encryption modules.
(new) loop-aes-modules-2.6-iop32x-etchnhalf_2.6.24-6~etchnhalf.1_arm.deb optional admin
loop-AES encryption modules for Linux 2.6 on IOP32x
This package depends on the loop-AES encryption modules for latest Linux
kernel 2.6 on IOP32x based (Thecus N2100, etc) machines.
.
The loop-AES encryption modules provide support for symmetric-key
encryption of block devices. They are typically used to encrypt disk
partitions and swap space.
.
Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded
MD5 IV. Compatibility options are provided to access encrypted devices
using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2.
.
You will need to install the package loop-aes-utils to use the loop-AES
encryption modules.
(new) loop-aes-modules-2.6-ixp4xx-etchnhalf_2.6.24-6~etchnhalf.1_arm.deb optional admin
loop-AES encryption modules for Linux 2.6 on IXP4xx
This package depends on the loop-AES encryption modules for latest Linux
kernel 2.6 on IXP4xx based (Linksys NSLU2, etc) machines.
.
The loop-AES encryption modules provide support for symmetric-key
encryption of block devices. They are typically used to encrypt disk
partitions and swap space.
.
Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded
MD5 IV. Compatibility options are provided to access encrypted devices
using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2.
.
You will need to install the package loop-aes-utils to use the loop-AES
encryption modules.
(new) loop-aes-modules-2.6.24-etchnhalf.1-footbridge_2.6.24+3.2c-6~etchnhalf.1_arm.deb optional admin
loop-AES encryption modules for Linux 2.6.24 on Footbridge based
This package provides the loop-AES encryption modules for the Linux kernel
version 2.6.24 on Footbridge (CATS, Netwinder) machines.
.
The loop-AES encryption modules provide support for symmetric-key
encryption of block devices. They are typically used to encrypt disk
partitions and swap space.
.
Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded
MD5 IV. Compatibility options are provided to access encrypted devices
using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2.
.
You will need to install the package loop-aes-utils to use the loop-AES
encryption modules.
(new) loop-aes-modules-2.6.24-etchnhalf.1-iop32x_2.6.24+3.2c-6~etchnhalf.1_arm.deb optional admin
loop-AES encryption modules for Linux 2.6.24 on IOP32x
This package provides the loop-AES encryption modules for the Linux kernel
version 2.6.24 on IOP32x based (Thecus N2100, etc) machines.
.
The loop-AES encryption modules provide support for symmetric-key
encryption of block devices. They are typically used to encrypt disk
partitions and swap space.
.
Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded
MD5 IV. Compatibility options are provided to access encrypted devices
using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2.
.
You will need to install the package loop-aes-utils to use the loop-AES
encryption modules.
(new) loop-aes-modules-2.6.24-etchnhalf.1-ixp4xx_2.6.24+3.2c-6~etchnhalf.1_arm.deb optional admin
loop-AES encryption modules for Linux 2.6.24 on IXP4xx
This package provides the loop-AES encryption modules for the Linux kernel
version 2.6.24 on IXP4xx based (Linksys NSLU2, etc) machines.
.
The loop-AES encryption modules provide support for symmetric-key
encryption of block devices. They are typically used to encrypt disk
partitions and swap space.
.
Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded
MD5 IV. Compatibility options are provided to access encrypted devices
using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2.
.
You will need to install the package loop-aes-utils to use the loop-AES
encryption modules.
(new) squashfs-modules-2.6-footbridge-etchnhalf_2.6.24-6~etchnhalf.1_arm.deb optional admin
Driver for compression filesystem modules for Linux 2.6 on Footbridge based
This package depends on the Driver for compression filesystem modules for
latest Linux kernel 2.6 on Footbridge (CATS, Netwinder) machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6-iop32x-etchnhalf_2.6.24-6~etchnhalf.1_arm.deb optional admin
Driver for compression filesystem modules for Linux 2.6 on IOP32x
This package depends on the Driver for compression filesystem modules for
latest Linux kernel 2.6 on IOP32x based (Thecus N2100, etc) machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6-ixp4xx-etchnhalf_2.6.24-6~etchnhalf.1_arm.deb optional admin
Driver for compression filesystem modules for Linux 2.6 on IXP4xx
This package depends on the Driver for compression filesystem modules for
latest Linux kernel 2.6 on IXP4xx based (Linksys NSLU2, etc) machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6.24-etchnhalf.1-footbridge_2.6.24+3.3-6~etchnhalf.1_arm.deb optional admin
Driver for compression filesystem modules for Linux 2.6.24 on Footbridge based
This package provides the Driver for compression filesystem modules for
the Linux kernel version 2.6.24 on Footbridge (CATS, Netwinder) machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6.24-etchnhalf.1-iop32x_2.6.24+3.3-6~etchnhalf.1_arm.deb optional admin
Driver for compression filesystem modules for Linux 2.6.24 on IOP32x
This package provides the Driver for compression filesystem modules for
the Linux kernel version 2.6.24 on IOP32x based (Thecus N2100, etc)
machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6.24-etchnhalf.1-ixp4xx_2.6.24+3.3-6~etchnhalf.1_arm.deb optional admin
Driver for compression filesystem modules for Linux 2.6.24 on IXP4xx
This package provides the Driver for compression filesystem modules for
the Linux kernel version 2.6.24 on IXP4xx based (Linksys NSLU2, etc)
machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
Changes: linux-modules-extra-2.6-etchnhalf (2.6.24-6~etchnhalf.1) stable; urgency=low
.
* Branch for etchnhalf
Override entries for your package:
Your package contains new components which requires manual editing of
the override file. It is ok otherwise, so please be patient. New
packages are usually added to the override file about once a week.
You may have gotten the distribution wrong. You'll get warnings above
if files already exist in other distributions.
Reply to: