--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.25-2-686: proprietary NVIDIA module will not install
- From: "david@pananix.com" <pananix@gmail.com>
- Date: Sun, 13 Jul 2008 19:15:08 -0500
- Message-id: <20080714001508.6408.79146.reportbug@tole.pananix.com>
Package: linux-image-2.6.25-2-686
Version: 2.6.25-6
Severity: important
The NVIDIA kernel module package from NVIDIA complains on a non-XEN
kernel (linux-image-2.6.25-2-686) that it cannot run on a XEN kernel.
config shows at least 3 XEN options compiled into a non-XEN kernel.
X is unusable without the NVIDIA kernel module w/ the flat panel screen
I have.
-- Package-specific info:
** Version:
Linux version 2.6.25-2-686 (Debian 2.6.25-6) (maks@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Fri Jun 27 03:23:20 UTC 2008
** Command line:
auto BOOT_IMAGE=Linux ro root=901
** Not tainted
** Kernel log:
[ 5.752544] hiddev96hidraw3: USB HID v1.00 Device [Cypress Semiconductor USB to Serial] on usb-0000:00:1d.0-2
[ 5.756979] hda: task_in_intr: status=0x51 { DriveReady SeekComplete Error }
[ 5.760363] hda: task_in_intr: error=0x04 { AbortedCommand }
[ 5.760363] ide: failed opcode was: 0xec
[ 5.764954] usb 1-2: New USB device found, idVendor=0665, idProduct=5161
[ 5.768667] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.772370] usb 1-2: Product: USB to Serial
[ 5.776366] usb 1-2: Manufacturer: Cypress Semiconductor
[ 5.782976] hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
[ 5.784364] hda: task_no_data_intr: error=0x04 { AbortedCommand }
[ 5.784364] ide: failed opcode was: 0xef
[ 6.290470] Linux agpgart interface v0.103
[ 6.529586] input: Power Button (FF) as /class/input/input3
[ 6.564476] ACPI: Power Button (FF) [PWRF]
[ 6.568499] input: Power Button (CM) as /class/input/input4
[ 6.596469] ACPI: Power Button (CM) [PWRB]
[ 7.445265] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 7.448493] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 7.482317] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 7.556055] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[ 7.556515] usbcore: registered new interface driver usblp
[ 7.701111] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 7.704559] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[ 7.708514] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.877193] intel_rng: FWH not detected
[ 7.968648] ACPI: PCI Interrupt 0000:04:02.1[A] -> GSI 23 (level, low) -> IRQ 23
[ 7.972648] bt87x0: Using board 1, analog, digital (rate 32000 Hz)
[ 8.218576] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
[ 8.246889] input: PC Speaker as /class/input/input5
[ 8.274976] Real Time Clock Driver v1.12ac
[ 8.392824] NET: Registered protocol family 23
[ 8.518292] Linux video capture interface: v2.00
[ 8.624755] bttv: driver version 0.9.17 loaded
[ 8.628592] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 8.632585] bttv: Bt8xx card found (0).
[ 8.636554] ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 8.640553] bttv0: Bt878 (rev 2) at 0000:04:02.0, irq: 23, latency: 32, mmio: 0xfaffe000
[ 8.649102] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
[ 8.652566] bttv0: using: Hauppauge (bt878) [card=10,autodetected]
[ 8.656599] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
[ 8.659084] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
[ 8.693433] tveeprom 1-0050: Hauppauge model 61371, rev B1 , serial# 2034005
[ 8.696551] tveeprom 1-0050: tuner model is Philips FM1236 (idx 23, type 2)
[ 8.700549] tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
[ 8.704549] tveeprom 1-0050: audio processor is MSP3430 (idx 7)
[ 8.708564] tveeprom 1-0050: has radio
[ 8.712550] bttv0: Hauppauge eeprom indicates model#61371
[ 8.716550] bttv0: tuner type=2
[ 8.720551] bttv0: i2c: checking for MSP34xx @ 0x80... found
[ 8.792429] msp3400' 1-0040: MSP3430G-A1 found @ 0x80 (bt878 #0 [sw])
[ 8.792560] msp3400' 1-0040: MSP3430G-A1 supports radio, mode is autodetect and autoselect
[ 8.862302] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[ 8.864575] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[ 9.066161] tuner' 1-0061: chip found @ 0xc2 (bt878 #0 [sw])
[ 9.068599] tuner-simple 1-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles))
[ 9.081902] bttv0: registered device video0
[ 9.084595] bttv0: registered device vbi0
[ 9.088594] bttv0: registered device radio0
[ 9.111493] bttv0: PLL: 28636363 => 35468950 .. ok
[ 9.224579] input: ImExPS/2 Generic Explorer Mouse as /class/input/input6
[ 9.253667] parport_pc 00:07: reported by Plug and Play ACPI
[ 9.256636] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 9.759197] hda: DMA disabled
[ 9.760609] hda: task_in_intr: status=0x51 { DriveReady SeekComplete Error }
[ 9.760614] hda: task_in_intr: error=0x04 { AbortedCommand }
[ 9.760614] ide: failed opcode was: 0xec
[ 9.764614] hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
[ 9.764614] hda: task_no_data_intr: error=0x04 { AbortedCommand }
[ 9.764614] ide: failed opcode was: 0xef
[ 9.876621] Adding 9799544k swap on /dev/md3. Priority:-1 extents:1 across:9799544k
[ 10.156639] EXT3 FS on md1, internal journal
[ 11.737549] fuse init (API version 7.9)
[ 11.800116] kjournald starting. Commit interval 5 seconds
[ 11.808745] EXT3 FS on md0, internal journal
[ 11.808750] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.823710] kjournald starting. Commit interval 5 seconds
[ 11.828746] EXT3 FS on md2, internal journal
[ 11.828753] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.577232] r8169: eth0: link up
[ 12.580803] r8169: eth0: link up
[ 12.891447] NET: Registered protocol family 10
[ 12.893296] lo: Disabled Privacy Extensions
[ 13.704874] eth0: no IPv6 routers present
[ 17.224382] warning: `named' uses 32-bit capabilities (legacy support in use)
[ 25.163453] lp0: using parport0 (interrupt-driven).
[ 25.189115] ppdev: user-space parallel port driver
[ 32.994120] cdrom: This disc doesn't have any tracks I recognize!
[ 33.175538] Bluetooth: Core ver 2.11
[ 33.182438] NET: Registered protocol family 31
[ 33.186154] Bluetooth: HCI device and connection manager initialized
[ 33.190240] Bluetooth: HCI socket layer initialized
[ 33.271629] Bluetooth: L2CAP ver 2.9
[ 33.274200] Bluetooth: L2CAP socket layer initialized
[ 33.306991] Bluetooth: RFCOMM socket layer initialized
[ 33.310159] Bluetooth: RFCOMM TTY layer initialized
[ 33.314163] Bluetooth: RFCOMM ver 1.8
[ 51.859648] tun: Universal TUN/TAP device driver, 1.6
[ 51.863373] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 51.869217] tun: Disabled Privacy Extensions
[ 170.403140] tun: Disabled Privacy Extensions
** Loaded modules:
Module Size Used by
tun 10976 1
binfmt_misc 11144 1
rfcomm 36368 0
l2cap 22784 5 rfcomm
bluetooth 52900 4 rfcomm,l2cap
ppdev 8676 0
lp 11012 0
video 19728 0
output 3712 1 video
ac 4448 0
battery 8448 0
ipv6 241956 37
fuse 44348 1
dm_crypt 14788 0
crypto_blkcipher 18116 1 dm_crypt
eeprom 7024 0
tuner 32832 0
tea5767 6180 1 tuner
tda8290 12356 1 tuner
tda18271 29224 1 tda8290
tda827x 9732 1 tda8290
tuner_xc2028 17296 1 tuner
xc5000 9700 1 tuner
tda9887 8900 1 tuner
tuner_simple 7784 1 tuner
mt20xx 11080 1 tuner
tea5761 4868 1 tuner
tvaudio 22232 0
msp3400 27852 0
bttv 157044 0
irtty_sir 6176 0
parport_pc 25860 1
psmouse 35920 0
videodev 30112 3 tuner,msp3400,bttv
v4l1_compat 12484 1 videodev
firmware_class 9088 3 tuner_xc2028,xc5000,bttv
sir_dev 13764 1 irtty_sir
parport 33868 3 ppdev,lp,parport_pc
ir_common 37028 1 bttv
irda 106200 1 sir_dev
serio_raw 6532 0
crc_ccitt 2176 1 irda
compat_ioctl32 1408 1 bttv
i2c_algo_bit 5892 1 bttv
rtc 14272 0
pcspkr 3136 0
i2c_i801 9520 0
v4l2_common 10720 4 tuner,tvaudio,msp3400,bttv
videobuf_dma_sg 13028 1 bttv
videobuf_core 17316 2 bttv,videobuf_dma_sg
btcx_risc 4712 1 bttv
tveeprom 14480 1 bttv
snd_bt87x 14820 0
i2c_core 22548 19 eeprom,tuner,tea5767,tda8290,tda18271,tda827x,tuner_xc2028,xc5000,tda9887,tuner_simple,mt20xx,tea5761,tvaudio,msp3400,bttv,i2c_algo_bit,i2c_i801,v4l2_common,tveeprom
rng_core 4900 0
iTCO_wdt 11204 0
usblp 13664 0
snd_hda_intel 309976 7
snd_pcm_oss 37824 0
snd_pcm 68228 5 snd_bt87x,snd_hda_intel,snd_pcm_oss
snd_mixer_oss 14880 2 snd_pcm_oss
snd_seq_dummy 3780 0
snd_seq_oss 28544 0
button 8240 0
snd_seq_midi_event 6976 1 snd_seq_oss
snd_seq 45872 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_timer 21320 4 snd_pcm,snd_seq
snd_seq_device 7564 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd 48772 17 snd_bt87x,snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_seq,snd_timer,snd_seq_device
soundcore 7488 2 snd
snd_page_alloc 9992 3 snd_bt87x,snd_hda_intel,snd_pcm
intel_agp 25084 0
agpgart 31720 1 intel_agp
joydev 11328 0
evdev 11328 5
ext3 120360 3
jbd 43444 1 ext3
mbcache 8260 1 ext3
dm_mirror 25316 0
dm_snapshot 17444 0
dm_mod 55656 3 dm_crypt,dm_mirror,dm_snapshot
raid1 22176 4
md_mod 74556 5 raid1
ide_cd_mod 32864 0
cdrom 31872 1 ide_cd_mod
sd_mod 26072 10
usbhid 40192 0
hid 36032 1 usbhid
ff_memless 5384 1 usbhid
ide_pci_generic 4228 0 [permanent]
piix 7176 0 [permanent]
ide_core 100312 3 ide_cd_mod,ide_pci_generic,piix
ata_piix 20196 8
ata_generic 8004 0
libata 142288 2 ata_piix,ata_generic
scsi_mod 138668 2 sd_mod,libata
dock 10448 1 libata
ehci_hcd 32620 0
uhci_hcd 22352 0
usbcore 130032 5 usblp,usbhid,ehci_hcd,uhci_hcd
r8169 28740 0
thermal 19100 0
processor 39660 1 thermal
fan 5636 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02)
Subsystem: ASRock Incorporation Device [1849:2770]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port [8086:2771] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: fc000000-febfffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [88] Subsystem: Intel Corporation Device [8086:0000]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0100c Data: 41b9
Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s, Latency L0 <256ns, L1 <4us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel <?>
Capabilities: [140] Root Complex Link <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: ASRock Incorporation Device [1849:0888]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fbefc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Prefetchable memory behind bridge: 00000000cff00000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0100c Data: 41c1
Capabilities: [90] Subsystem: ASRock Incorporation Device [1849:27d0]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0100c Data: 41c9
Capabilities: [90] Subsystem: ASRock Incorporation Device [1849:27d2]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01)
Subsystem: ASRock Incorporation Device [1849:27c8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01)
Subsystem: ASRock Incorporation Device [1849:27c9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01)
Subsystem: ASRock Incorporation Device [1849:27ca]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01)
Subsystem: ASRock Incorporation Device [1849:27cb]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at dc00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20)
Subsystem: ASRock Incorporation Device [1849:27cc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fbefbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Prefetchable memory behind bridge: 00000000faf00000-00000000faffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: ASRock Incorporation Device [1849:244e]
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
Subsystem: ASRock Incorporation Device [1849:27b8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel modules: intel-rng, iTCO_wdt
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: ASRock Incorporation Device [1849:27df]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASRock Incorporation Device [1849:27c0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at d400 [size=8]
Region 1: I/O ports at d080 [size=4]
Region 2: I/O ports at d000 [size=8]
Region 3: I/O ports at cc00 [size=4]
Region 4: I/O ports at c880 [size=16]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01)
Subsystem: ASRock Incorporation Device [1849:27da]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E PCI Express Fast Ethernet controller [10ec:8136] (rev 01)
Subsystem: ASRock Incorporation Device [1849:8136]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 220
Region 0: I/O ports at e800 [size=256]
Region 2: Memory at fbfff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fbfc0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Vital Product Data <?>
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0100c Data: 41d1
Capabilities: [60] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <128ns, L1 unlimited
ExtTag+ AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [84] Vendor Specific Information <?>
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [12c] Virtual Channel <?>
Capabilities: [148] Device Serial Number 36-81-ec-10-00-00-00-00
Capabilities: [154] Power Budgeting <?>
Kernel driver in use: r8169
Kernel modules: r8169
03:00.0 VGA compatible controller [0300]: nVidia Corporation G71 [GeForce 7300 GS] [10de:01df] (rev a1)
Subsystem: eVga.com. Corp. Device [3842:c436]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
Expansion ROM at febe0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <4us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [128] Power Budgeting <?>
Kernel modules: nvidiafb
04:02.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 02)
Subsystem: Hauppauge computer works Inc. Device [0070:13eb]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at faffe000 (32-bit, prefetchable) [size=4K]
Kernel driver in use: bttv
Kernel modules: bttv
04:02.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 02)
Subsystem: Hauppauge computer works Inc. Device [0070:13eb]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fafff000 (32-bit, prefetchable) [size=4K]
Kernel driver in use: Bt87x
Kernel modules: snd-bt87x
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (999, 'testing'), (900, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.25-2-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.25-2-686 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92e tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.25-2-686 recommends:
ii libc6-i686 2.7-10 GNU C Library: Shared libraries [i
-- debconf information excluded
--- End Message ---