Bug#477233: linux-image-2.6.24-1-686: no sound with alsa/ICH6 anymore
Package: linux-image-2.6.24-1-686
Version: 2.6.24-5
Severity: important
After upgrading to kernel image 2.4.24 there's no pcm output any more to
the speaker / line out. Previous used kernel image (2.6.18) still works.
-- Package-specific info:
** Version:
Linux version 2.6.24-1-686 (Debian 2.6.24-5) (waldi@debian.org) (gcc version 4.1.3 20080308 (prerelease) (Debian 4.1.2-21)) #1 SMP Thu Mar 27 17:45:04 UTC 2008
** Command line:
root=/dev/hda7 ro vga=791
** Not tainted
** Kernel log:
PCI: Setting latency timer of device 0000:00:02.0 to 64
PM: Writing back config space on device 0000:00:02.1 at offset 4 (was 0, writing 60000000)
PM: Writing back config space on device 0000:00:1c.0 at offset f (was 40100, writing 4010a)
PM: Writing back config space on device 0000:00:1c.0 at offset 9 (was 10001, writing d3f1d001)
PM: Writing back config space on device 0000:00:1c.0 at offset 8 (was 0, writing b7f0b400)
PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 0, writing 3030)
PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810008)
PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100000, writing 100507)
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.0 to 64
usb usb1: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.1 to 64
usb usb2: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.2 to 64
usb usb3: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.3 to 64
usb usb4: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.7 to 64
PM: Writing back config space on device 0000:00:1e.0 at offset f (was 40000, writing 400ff)
PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 1fff1)
PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing b800b800)
PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 22800010, writing 328000f0)
PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20060600, writing 200a0600)
PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 8100107)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PM: Writing back config space on device 0000:00:1e.2 at offset f (was 100, writing 10a)
PM: Writing back config space on device 0000:00:1e.2 at offset 7 (was 0, writing b0040400)
PM: Writing back config space on device 0000:00:1e.2 at offset 6 (was 0, writing b0040800)
PM: Writing back config space on device 0000:00:1e.2 at offset 5 (was 1301, writing 18c1)
PM: Writing back config space on device 0000:00:1e.2 at offset 4 (was 1201, writing 1c01)
PM: Writing back config space on device 0000:00:1e.2 at offset 1 (was 2900005, writing 2900003)
ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1e.2 to 64
ipw2200: Unable to load ucode: -22
ipw2200: Unable to load firmware: -22
ipw2200: Failed to up device
PM: Writing back config space on device 0000:00:1e.3 at offset f (was 200, writing 20b)
PM: Writing back config space on device 0000:00:1e.3 at offset 5 (was 1501, writing 2001)
PM: Writing back config space on device 0000:00:1e.3 at offset 4 (was 1401, writing 2401)
PM: Writing back config space on device 0000:00:1e.3 at offset 1 (was 2900005, writing 2900001)
ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1e.3 to 64
PM: Writing back config space on device 0000:00:1f.0 at offset 1 (was 2000007, writing 2000107)
PM: Writing back config space on device 0000:00:1f.1 at offset f (was 100, writing 1ff)
PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800000, writing 2800005)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
PCI: Enabling device 0000:06:05.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 22 (level, low) -> IRQ 22
PM: Writing back config space on device 0000:06:05.0 at offset f (was 100, writing 105)
PM: Writing back config space on device 0000:06:05.0 at offset 4 (was 0, writing b8000000)
PM: Writing back config space on device 0000:06:05.0 at offset 3 (was 0, writing 2000)
PM: Writing back config space on device 0000:06:05.0 at offset 1 (was 100002, writing 8100106)
eth1: Coming out of suspend...
PCI: Enabling device 0000:06:07.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 20 (level, low) -> IRQ 18
PM: Writing back config space on device 0000:06:07.0 at offset f (was 18030100, writing 1803010b)
PM: Writing back config space on device 0000:06:07.0 at offset 4 (was 0, writing b8002000)
PM: Writing back config space on device 0000:06:07.0 at offset 3 (was 0, writing 2008)
PM: Writing back config space on device 0000:06:07.0 at offset 1 (was 2900002, writing 2900116)
PM: Writing back config space on device 0000:06:09.0 at offset f (was 7000100, writing 5800100)
PM: Writing back config space on device 0000:06:09.0 at offset e (was 0, writing 28fc)
PM: Writing back config space on device 0000:06:09.0 at offset d (was 0, writing 2800)
PM: Writing back config space on device 0000:06:09.0 at offset c (was 0, writing 14fc)
PM: Writing back config space on device 0000:06:09.0 at offset b (was 0, writing 1400)
PM: Writing back config space on device 0000:06:09.0 at offset a (was 0, writing 6bfff000)
PM: Writing back config space on device 0000:06:09.0 at offset 9 (was 0, writing 68000000)
PM: Writing back config space on device 0000:06:09.0 at offset 8 (was 0, writing 67fff000)
PM: Writing back config space on device 0000:06:09.0 at offset 7 (was 0, writing 64000000)
PM: Writing back config space on device 0000:06:09.0 at offset 6 (was 0, writing b00a0706)
PM: Writing back config space on device 0000:06:09.0 at offset 3 (was 824000, writing 82a800)
PM: Writing back config space on device 0000:06:09.1 at offset f (was 4020200, writing 40202ff)
PM: Writing back config space on device 0000:06:09.1 at offset 4 (was 0, writing b8003000)
PM: Writing back config space on device 0000:06:09.1 at offset 1 (was 2100000, writing 2100106)
PM: Writing back config space on device 0000:06:09.2 at offset f (was 300, writing 3ff)
PM: Writing back config space on device 0000:06:09.2 at offset 4 (was 0, writing b8003800)
PM: Writing back config space on device 0000:06:09.2 at offset 3 (was 800000, writing 802000)
PM: Writing back config space on device 0000:06:09.2 at offset 1 (was 2100000, writing 2100106)
ACPI: PCI Interrupt 0000:06:09.2[C] -> GSI 18 (level, low) -> IRQ 19
PM: Writing back config space on device 0000:06:09.3 at offset f (was 300, writing 3ff)
PM: Writing back config space on device 0000:06:09.3 at offset 4 (was 0, writing b8003c00)
PM: Writing back config space on device 0000:06:09.3 at offset 1 (was 2100000, writing 2100102)
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/33 mode selected
Restarting tasks ... <6>usb 2-1: USB disconnect, address 4
ipw2200: Radio Frequency Kill Switch is On:
Kill switch must be turned off for wireless networking to work.
done.
usb 2-1: new low speed USB device using uhci_hcd and address 5
usb 2-1: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /class/input/input9
input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1
b44: eth0: Link is up at 100 Mbps, half duplex.
b44: eth0: Flow control is off for TX and off for RX.
** Loaded modules:
Module Size Used by
i915 22048 2
drm 74132 3 i915
ipv6 240836 22
ext2 65608 1
sha256_generic 11040 0
cbc 4416 3
blkcipher 6724 1 cbc
dm_snapshot 16964 0
dm_mirror 21600 0
tun 10976 0
ieee80211_crypt_tkip 10144 0
cpufreq_ondemand 8492 1
acpi_cpufreq 9260 0
freq_table 4512 2 cpufreq_ondemand,acpi_cpufreq
aes_i586 33376 4
dm_crypt 13220 1
dm_mod 55812 9 dm_snapshot,dm_mirror,dm_crypt
usbhid 28096 0
hid 34272 1 usbhid
joydev 11360 0
b44 25488 0
fan 4772 0
snd_intel8x0 32028 0
snd_intel8x0m 16844 0
snd_ac97_codec 92932 2 snd_intel8x0,snd_intel8x0m
ac97_bus 2176 1 snd_ac97_codec
sdhci 16836 0
ipw2200 134568 0
snd_pcm_oss 38272 0
snd_mixer_oss 15296 1 snd_pcm_oss
container 4864 0
firewire_ohci 17760 0
firewire_core 39232 1 firewire_ohci
ieee80211 31048 1 ipw2200
ieee80211_crypt 5888 2 ieee80211_crypt_tkip,ieee80211
ssb 30628 1 b44
video 18672 0
output 3744 1 video
mmc_core 47300 1 sdhci
yenta_socket 24844 1
rsrc_nonstatic 11872 1 yenta_socket
crc_itu_t 2176 1 firewire_core
snd_pcm 71780 4 snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm_oss
pcmcia 37036 1 ssb
pcmcia_core 36884 3 yenta_socket,rsrc_nonstatic,pcmcia
firmware_class 9312 2 ipw2200,pcmcia
mii 5312 1 b44
ehci_hcd 32524 0
iTCO_wdt 11268 0
uhci_hcd 23376 0
battery 13572 0
ac 6116 0
button 8432 0
snd_timer 21092 1 snd_pcm
thermal 16028 0
processor 36520 3 acpi_cpufreq,thermal
psmouse 36464 0
i2c_i801 9232 0
intel_agp 23412 1
ide_cd 36224 0
cdrom 32512 1 ide_cd
snd 48612 7 snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
pcspkr 3200 0
serio_raw 6660 0
i2c_core 22432 1 i2c_i801
usbcore 132940 4 usbhid,ehci_hcd,uhci_hcd
agpgart 31688 3 drm,intel_agp
soundcore 7552 1 snd
snd_page_alloc 10056 3 snd_intel8x0,snd_intel8x0m,snd_pcm
rtc 13052 0
ext3 122888 2
jbd 43732 1 ext3
mbcache 8288 2 ext2,ext3
ide_disk 15648 5
ata_generic 7428 0
libata 144464 1 ata_generic
scsi_mod 141164 1 libata
generic 4388 0 [permanent]
piix 7492 0 [permanent]
ide_core 108292 4 ide_cd,ide_disk,generic,piix
evdev 11104 7
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03)
Subsystem: Samsung Electronics Co Ltd Unknown device [144d:c01a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 03) (prog-if 00 [VGA controller])
Subsystem: Samsung Electronics Co Ltd Unknown device [144d:c01a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: Memory at b0080000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 1800 [size=8]
Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at b0000000 (32-bit, non-prefetchable) [size=256K]
Capabilities: <access denied>
Kernel modules: intelfb
00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 03)
Subsystem: Samsung Electronics Co Ltd Unknown device [144d:c01a]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at 60000000 (32-bit, non-prefetchable) [disabled] [size=512K]
Capabilities: <access denied>
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: b4000000-b7ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Unknown device [144d:c01a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Unknown device [144d:c01a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 20
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Unknown device [144d:c01a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 03) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Unknown device [144d:c01a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 17
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Unknown device [144d:c01a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at b0040000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=0a, sec-latency=32
Memory behind bridge: b8000000-b80fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 03)
Subsystem: Samsung Electronics Co Ltd Unknown device [144d:c01a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 18c0 [size=64]
Region 2: Memory at b0040800 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at b0040400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
00:1e.3 Modem [0703]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller [8086:266d] (rev 03) (prog-if 00 [Generic])
Subsystem: Samsung Electronics Co Ltd Unknown device [144d:2115]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 0: I/O ports at 2400 [size=256]
Region 1: I/O ports at 2000 [size=128]
Capabilities: <access denied>
Kernel driver in use: Intel ICH Modem
Kernel modules: snd-intel8x0m
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 03)
Subsystem: Samsung Electronics Co Ltd Unknown device [144d:c01a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: iTCO_wdt, intel-rng
00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Samsung Electronics Co Ltd Unknown device [144d:c01a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1810 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 03)
Subsystem: Samsung Electronics Co Ltd Unknown device [144d:c01a]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 20
Region 4: I/O ports at 18a0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
06:05.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02)
Subsystem: Samsung Electronics Co Ltd Unknown device [144d:c01a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 22
Region 0: Memory at b8000000 (32-bit, non-prefetchable) [size=8K]
[virtual] Expansion ROM at b8010000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: b44
Kernel modules: b44
06:07.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG Network Connection [8086:4220] (rev 05)
Subsystem: Intel Corporation Samsung P35 integrated WLAN [8086:2731]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at b8002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ipw2200
Kernel modules: ipw2200
06:09.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b3)
Subsystem: Samsung Electronics Co Ltd Unknown device [144d:c01a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 17
Region 0: Memory at 000da000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 64000000-67fff000 (prefetchable)
Memory window 1: 68000000-6bfff000
I/O window 0: 00001400-000014ff
I/O window 1: 00002800-000028ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
06:09.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 08) (prog-if 10 [OHCI])
Subsystem: Samsung Electronics Co Ltd Unknown device [144d:c01a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin B routed to IRQ 16
Region 0: Memory at b8003000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
06:09.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 17)
Subsystem: Samsung Electronics Co Ltd Unknown device [144d:c01a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin C routed to IRQ 19
Region 0: Memory at b8003800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci
Kernel modules: sdhci
06:09.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 08)
Subsystem: Samsung Electronics Co Ltd Unknown device [144d:c01a]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 255
Region 0: Memory at b8003c00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.24-1-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.24-1-686 depends on:
ii debconf [debconf-2.0] 1.5.20 Debian configuration management sy
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
ii yaird [linux-initramfs-tool] 0.0.12-24 Yet Another mkInitRD
Versions of packages linux-image-2.6.24-1-686 recommends:
ii libc6-i686 2.7-10 GNU C Library: Shared libraries [i
-- debconf information excluded
Reply to: