[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#475629: linux-image-2.6.24-1-686: ext3 corrupted when log files fill up disk



Package: linux-image-2.6.24-1-686
Version: 2.6.24-5
Severity: critical
Justification: breaks the whole system

I first reported the following bug to samba: see https://bugzilla.samba.org/show_bug.cgi?id=5386

This is a copy of what I submitted:
I am using GNOME (2.22.0 Debian) and I used the Network Settings GUI to change
my IP address from 192.168.0.100 to 192.168.1.100.  I do not believe I changed
anything else, including the gateway address.  I was attempting to communicate
with a network device I had connected to my LAN.  I was sharing some files with
a Windows XP computer on the network.  
I believe the above was the cause.  A few moments later I noticed that the
system was very slow and that the hard drive was continually active. 
Eventually I ran out of space.  I noticed that many log files had become very
large and I found the following repetitive entries (1000s of them):
[2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239)
  reload_interfaces: No subnets to listen to. Waiting..
[2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239)
  reload_interfaces: No subnets to listen to. Waiting..
....
....
....
[2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239)
  reload_interfaces: No subnets to listen to. Waiting..
[2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239)
  reload_interfaces: No subnets to listen to. Waiting..
[2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239)
  reload_interfaces: No subnets to listen to. Waiting..
[2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239)
  reload_interfaces: No subnets to listen to. Waiting..
[2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239)
  reload_interfaces: No subnets to listen to. Waiting..
[2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239)
  reload_interfaces: No subnets to listen to. Waiting..
[2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239)
  reload_interfaces: No subnets to listen to. Waiting..
[2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239)
  reload_interfaces: No subnets to listen to. Waiting..
[2008/04/10 22:06:52, 0]
nsswitch/winbindd_cache.c:initialize_winbindd_cache(2222)
  initialize_winbindd_cache: clearing cache and re-creating with version number
1

I hope this helps to find the problem.  Some of the log files which were very
large were samba.log, daemon.log, syslog, log.nmbd.

-------- End of Samba report ----------
What I did not report to samba was the fact that the ext3 drive which was mounted at the root (/) became 
corrupted.  At the end of this report you will see entries from the kernel log for hda6 which is 
mounted on /home.  THese are similar to what I experienced on hda3.  I could not start X as the 
font files were corrupted and I had to reinstall them.  I suspect there may be other files which I have 
yet to find which are corrupted; although all seems to be working for now.  When I ran fsck on /dev/hda3 to fix 
the problems there were 100s of errors similar to the log below.  Then after that it began reporting many
errors about inode - something to the effect that it was reporting 2, but only finding 1.  Sorry, I did not
write down the errors.  There were 100s and 100s of them (I just kept pressing the space bar) to overwrite.
There is a possibility that this was caused by the fact that once
the disk began to run out of space  because of the log files, I could not get a response from the computer but the
disks remained active.  I then powered down the machine while it was running.  The reason I report
this is because I would have assumed that the ext3 system with journaling would have been able to pick
up from this type of problem.



-- Package-specific info:
** Version:
Linux version 2.6.24-1-686 (Debian 2.6.24-5) (waldi@debian.org) (gcc version 4.1.3 20080308 (prerelease) (Debian 4.1.2-21)) #1 SMP Thu Mar 27 17:45:04 UTC 2008

** Command line:
root=/dev/hda3 ro 

** Not tainted

** Kernel log:
EXT3-fs error (device hda6) in ext3_new_inode: IO failure
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=23595078, sector=23595078
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 23595078
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=294975, block=589830
EXT3-fs error (device hda6) in ext3_reserve_inode_write: IO failure
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=23595078, sector=23595078
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 23595078
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=294976, block=589830
EXT3-fs error (device hda6) in ext3_reserve_inode_write: IO failure
EXT3-fs error (device hda6) in ext3_new_inode: IO failure
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=23595078, sector=23595078
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 23595078
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=294976, block=589830
EXT3-fs error (device hda6) in ext3_reserve_inode_write: IO failure
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549

** Loaded modules:
Module                  Size  Used by
binfmt_misc            11240  1 
ppdev                   8804  0 
lp                     11076  0 
ipv6                  240836  27 
xt_limit                2656  8 
xt_tcpudp               3136  55 
ipt_LOG                 5952  8 
ipt_MASQUERADE          3776  0 
ipt_TOS                 2240  5 
ipt_REJECT              4480  1 
nf_conntrack_irc        6776  0 
nf_conntrack_ftp        8896  0 
xt_state                2464  6 
iptable_nat             6916  0 
nf_nat                 18316  2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4      17352  8 iptable_nat
nf_conntrack           62272  7 ipt_MASQUERADE,nf_conntrack_irc,nf_conntrack_ftp,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4
iptable_mangle          2784  1 
iptable_filter          2976  1 
ip_tables              13188  3 iptable_nat,iptable_mangle,iptable_filter
x_tables               14244  9 xt_limit,xt_tcpudp,ipt_LOG,ipt_MASQUERADE,ipt_TOS,ipt_REJECT,xt_state,iptable_nat,ip_tables
nls_iso8859_1           4128  1 
nls_cp437               5792  1 
vfat                   12224  1 
fat                    48764  1 vfat
dm_snapshot            16964  0 
dm_mirror              21600  0 
dm_mod                 55812  2 dm_snapshot,dm_mirror
psmouse                36464  0 
3c509                  12148  0 
snd_hda_intel         275264  3 
snd_pcm_oss            38272  0 
snd_pcm                71780  3 snd_hda_intel,snd_pcm_oss
snd_mixer_oss          15296  1 snd_pcm_oss
snd_seq_dummy           3780  0 
snd_seq_oss            29472  0 
snd_seq_midi            8160  0 
snd_rawmidi            22624  1 snd_seq_midi
snd_seq_midi_event      6976  2 snd_seq_oss,snd_seq_midi
snd_seq                46544  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              21092  3 snd_pcm,snd_seq
snd_seq_device          7820  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd                    48612  13 snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
button                  8432  0 
soundcore               7552  1 snd
parport_pc             33668  1 
parport                34280  3 ppdev,lp,parport_pc
i2c_nforce2             6464  0 
snd_page_alloc         10056  2 snd_hda_intel,snd_pcm
i2c_core               22432  1 i2c_nforce2
evdev                  11104  3 
pcspkr                  3200  0 
rtc                    13052  0 
ext3                  122888  2 
jbd                    43732  1 ext3
mbcache                 8288  1 ext3
ide_cd                 36224  0 
cdrom                  32512  1 ide_cd
ide_disk               15648  5 
sata_nv                25000  0 
usbhid                 28096  1 
hid                    34272  1 usbhid
ata_generic             7428  0 
amd74xx                 8752  0 [permanent]
ehci_hcd               32524  0 
ohci_hcd               21988  0 
libata                144464  2 sata_nv,ata_generic
scsi_mod              141164  1 libata
generic                 4388  0 [permanent]
ide_core              108292  4 ide_cd,ide_disk,amd74xx,generic
skge                   39184  0 
usbcore               132940  5 usbhid,ehci_hcd,ohci_hcd
thermal                16028  0 
processor              36520  1 thermal
fan                     4772  0 

** PCI devices:
00:00.0 Host bridge [0600]: nVidia Corporation Unknown device [10de:0070] (rev c1)
	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8189]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:00.1 RAM memory [0500]: nVidia Corporation Unknown device [10de:007f] (rev a1)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.2 RAM memory [0500]: nVidia Corporation Unknown device [10de:0075] (rev a1)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.3 RAM memory [0500]: nVidia Corporation Unknown device [10de:006f] (rev a1)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.4 RAM memory [0500]: nVidia Corporation Unknown device [10de:00b4] (rev a1)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:01.0 RAM memory [0500]: nVidia Corporation Unknown device [10de:0076] (rev a1)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.1 RAM memory [0500]: nVidia Corporation Unknown device [10de:0078] (rev a1)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.2 RAM memory [0500]: nVidia Corporation Unknown device [10de:0079] (rev a1)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.3 RAM memory [0500]: nVidia Corporation Unknown device [10de:007a] (rev a1)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.4 RAM memory [0500]: nVidia Corporation Unknown device [10de:007b] (rev a1)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.5 RAM memory [0500]: nVidia Corporation Unknown device [10de:007c] (rev a1)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.6 RAM memory [0500]: nVidia Corporation Unknown device [10de:007d] (rev a1)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:02.0 PCI bridge [0604]: nVidia Corporation Unknown device [10de:007e] (rev a2) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: d0000000-d2ffffff
	Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:04.0 PCI bridge [0604]: nVidia Corporation Unknown device [10de:007e] (rev a2) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:05.0 PCI bridge [0604]: nVidia Corporation Unknown device [10de:007e] (rev a2) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:06.0 PCI bridge [0604]: nVidia Corporation Unknown device [10de:007e] (rev a2) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:07.0 PCI bridge [0604]: nVidia Corporation Unknown device [10de:007e] (rev a2) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:09.0 RAM memory [0500]: nVidia Corporation MCP51 Host Bridge [10de:0270] (rev a2)
	Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0260] (rev a2)
	Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:0a.1 SMBus [0c05]: nVidia Corporation MCP51 SMBus [10de:0264] (rev a2)
	Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 10
	Region 4: I/O ports at 5000 [size=64]
	Region 5: I/O ports at 5100 [size=64]
	Capabilities: <access denied>
	Kernel driver in use: nForce2_smbus
	Kernel modules: i2c-nforce2

00:0a.2 RAM memory [0500]: nVidia Corporation MCP51 Memory Controller 0 [10de:0272] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81bc]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:0b.0 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026d] (rev a2) (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at d5006000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

00:0b.1 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026e] (rev a2) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 18
	Region 0: Memory at d5007000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:0d.0 IDE interface [0101]: nVidia Corporation MCP51 IDE [10de:0265] (rev a1) (prog-if 8a [Master SecP PriP])
	Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
	Region 4: I/O ports at f000 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: AMD_IDE
	Kernel modules: amd74xx

00:0e.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0266] (rev a1) (prog-if 85 [Master SecO PriO])
	Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 19
	Region 0: I/O ports at 09f0 [size=8]
	Region 1: I/O ports at 0bf0 [size=4]
	Region 2: I/O ports at 0970 [size=8]
	Region 3: I/O ports at 0b70 [size=4]
	Region 4: I/O ports at d400 [size=16]
	Region 5: Memory at d5004000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: sata_nv
	Kernel modules: sata_nv

00:0f.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0267] (rev a1) (prog-if 85 [Master SecO PriO])
	Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 20
	Region 0: I/O ports at 09e0 [size=8]
	Region 1: I/O ports at 0be0 [size=4]
	Region 2: I/O ports at 0960 [size=8]
	Region 3: I/O ports at 0b60 [size=4]
	Region 4: I/O ports at e800 [size=16]
	Region 5: Memory at d5005000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: sata_nv
	Kernel modules: sata_nv

00:10.0 PCI bridge [0604]: nVidia Corporation MCP51 PCI Bridge [10de:026f] (rev a2) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=06, subordinate=06, sec-latency=128
	I/O behind bridge: 0000b000-0000bfff
	Memory behind bridge: d3000000-d4ffffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR+
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:10.1 Audio device [0403]: nVidia Corporation MCP51 High Definition Audio [10de:026c] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:818f]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (500ns min, 1250ns max)
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at d5000000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel

01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 7100 GS [10de:016a] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: eVga.com. Corp. Unknown device [3842:c412]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at d1000000 (64-bit, non-prefetchable) [size=16M]
	Expansion ROM at d2000000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel modules: nvidiafb

06:0c.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
	Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus) [1043:811a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (5750ns min, 7750ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=16K]
	Region 1: I/O ports at b000 [size=256]
	Expansion ROM at d3000000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: skge
	Kernel modules: skge



-- System Information:
Debian Release: lenny/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.24-1-686 (SMP w/2 CPU cores)
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.24-1-686 depends on:
ii  debconf [debconf-2.0]        1.5.20      Debian configuration management sy
ii  initramfs-tools [linux-initr 0.91e       tools for generating an initramfs
ii  module-init-tools            3.3-pre11-4 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.24-1-686 recommends:
ii  libc6-i686                    2.7-10     GNU C Library: Shared libraries [i

-- debconf information:
  linux-image-2.6.24-1-686/preinst/overwriting-modules-2.6.24-1-686: true
  linux-image-2.6.24-1-686/postinst/bootloader-error-2.6.24-1-686:
  linux-image-2.6.24-1-686/postinst/create-kimage-link-2.6.24-1-686: true
  linux-image-2.6.24-1-686/prerm/would-invalidate-boot-loader-2.6.24-1-686: true
  linux-image-2.6.24-1-686/preinst/initrd-2.6.24-1-686:
  linux-image-2.6.24-1-686/preinst/lilo-has-ramdisk:
  linux-image-2.6.24-1-686/preinst/abort-install-2.6.24-1-686:
  linux-image-2.6.24-1-686/prerm/removing-running-kernel-2.6.24-1-686: true
  linux-image-2.6.24-1-686/preinst/abort-overwrite-2.6.24-1-686:
  linux-image-2.6.24-1-686/postinst/bootloader-test-error-2.6.24-1-686:
  linux-image-2.6.24-1-686/preinst/lilo-initrd-2.6.24-1-686: true
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.24-1-686/postinst/old-system-map-link-2.6.24-1-686: true
  linux-image-2.6.24-1-686/preinst/failed-to-move-modules-2.6.24-1-686:
  linux-image-2.6.24-1-686/postinst/depmod-error-initrd-2.6.24-1-686: false
  linux-image-2.6.24-1-686/preinst/bootloader-initrd-2.6.24-1-686: true
  linux-image-2.6.24-1-686/postinst/old-initrd-link-2.6.24-1-686: true
  linux-image-2.6.24-1-686/postinst/old-dir-initrd-link-2.6.24-1-686: true
  linux-image-2.6.24-1-686/postinst/depmod-error-2.6.24-1-686: false
  linux-image-2.6.24-1-686/preinst/elilo-initrd-2.6.24-1-686: true
  linux-image-2.6.24-1-686/postinst/kimage-is-a-directory:



Reply to: