Bug#437260: linux-image-2.6.22-1-powerpc: Oops with the sata_sil
Package: linux-image-2.6.22-1-powerpc
Version: 2.6.22-3
Severity: important
Hi !
I have a external SATA hard drive and a PCMCIA sata controller.
When I plug the PCMCIA card the controller is recognized as sata_sil.
When I plug the hard drive on the card, I have to play : plug in the first port,
wait, then plug in the second one, wait, and plug back in the first, and so on
until the hard drive is recognized.
After that, I can access the data but, when I order a heavy operation (i.e.
updatedb, find ./, xfs_check, etc.), I recieve quickly a Oops in response and
the hard drive is not responding anymore.
The complete related kern.log is joined.
Thanks you very much,
Romain.
kern.log
========
Here the card detection :
Yenta: CardBus bridge found at 0001:10:1a.0 [0000:0000]
PCI: Bus 17, cardbus bridge: 0001:10:1a.0
IO window: 00001000-00008fff
IO window: 00009000-000091ff
PREFETCH window: 90000000-9fffffff
MEM window: f3000000-f33fffff
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0001:10:1a.0, mfunc 0x00000002, devctl 0x60
Yenta: ISA IRQ mask 0x0000, PCI irq 58
Socket status: 30000869
pcmcia: parent PCI bridge I/O window: 0x0 - 0x7fffff
pcmcia: parent PCI bridge Memory window: 0xf3000000 - 0xf3ffffff
pcmcia: parent PCI bridge Memory window: 0x80000000 - 0xafffffff
pccard: CardBus card inserted into slot 0
SCSI subsystem initialized
libata version 2.21 loaded.
sata_sil 0001:11:00.0: version 2.2
PCI: Enabling device 0001:11:00.0 (0000 -> 0003)
sata_sil 0001:11:00.0: cache line size not set. Driver may not function
sata_sil 0001:11:00.0: Applying R_ERR on DMA activate FIS errata fix
scsi0 : sata_sil
scsi1 : sata_sil
ata1: SATA max UDMA/100 cmd 0xf209e080 ctl 0xf209e08a bmdma 0xf209e000 irq 58
ata2: SATA max UDMA/100 cmd 0xf209e0c0 ctl 0xf209e0ca bmdma 0xf209e008 irq 58
ata1: SATA link down (SStatus 0 SControl 310)
ata2: SATA link down (SStatus 0 SControl 310)
Here the plug/unplug game :
ata2: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0x2 frozen
ata2: hard resetting port
ata2: port is slow to respond, please be patient (Status 0xff)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0x2 frozen
ata2: hard resetting port
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata1: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0x2 frozen
ata1: hard resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1: EH complete
ata1: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0x2 frozen
ata1: hard resetting port
ata1: SATA link down (SStatus 0 SControl 310)
ata1: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0x2 frozen
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.00: ATA-7: WDC WD3200AAKS-00SBA0, 12.01B01, max UDMA/133
ata2.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/100
ata2: EH complete
scsi 1:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 1:0:0:0: [sda] Attached SCSI disk
Mount for jounral recovery, umount and xfs_check :
XFS mounting filesystem sda1
Starting XFS recovery on filesystem: sda1 (logdev: internal)
Ending XFS recovery on filesystem: sda1 (logdev: internal)
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x280000 action 0x0
ata2.00: (BMDMA2 stat 0xc0009)
ata2.00: cmd c8/00:1e:11:c0:7c/00:00:00:00:00/e1 tag 0 cdb 0x0 data 15360 in
res 51/00:00:01:00:00/00:00:00:00:00/e1 Emask 0x1 (device error)
ata2.00: configured for UDMA/100
ata2: EH complete
sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x280000 action 0x0
ata2.00: (BMDMA2 stat 0xc0009)
ata2.00: cmd c8/00:02:8f:58:9b/00:00:00:00:00/e1 tag 0 cdb 0x0 data 1024 in
res 51/00:00:01:00:00/00:00:00:00:00/e1 Emask 0x1 (device error)
ata2.00: configured for UDMA/100
ata2: EH complete
sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x280000 action 0x0
ata2.00: (BMDMA2 stat 0xd0009)
ata2.00: cmd c8/00:1e:21:bd:a7/00:00:00:00:00/e1 tag 0 cdb 0x0 data 15360 in
res 51/00:00:01:00:00/00:00:00:00:00/e1 Emask 0x1 (device error)
ata2.00: configured for UDMA/100
ata2: EH complete
sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x280000 action 0x0
ata2.00: (BMDMA2 stat 0xc0009)
ata2.00: cmd c8/00:02:ff:c7:a8/00:00:00:00:00/e1 tag 0 cdb 0x0 data 1024 in
res 51/00:00:01:00:00/00:00:00:00:00/e1 Emask 0x1 (device error)
ata2.00: configured for UDMA/100
ata2: EH complete
sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Machine check in kernel mode.
Caused by (from SRR1=141030): Transfer error ack signal
Oops: Machine check, sig: 7 [#1]
PowerMac
Modules linked in: sd_mod nfsd exportfs lp parport cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_ondemand cpufreq_conservative nfs lockd nfs_acl sunrpc ipv6 ext2 mbcache sha256 aes cbc blkcipher dm_crypt dm_snapshot dm_mirror dm_mod firewire_sbp2 loop sata_sil libata scsi_mod pcmcia firmware_class snd_aoa_i2sbus snd_pcm snd_timer snd_page_alloc snd soundcore snd_aoa_soundbus yenta_socket rsrc_nonstatic pcmcia_core uninorth_agp agpgart tsdev evdev xfs ide_cd cdrom ide_disk sungem sungem_phy firewire_ohci firewire_core crc_itu_t i2c_powermac
NIP: c0015fc4 LR: f252d564 CTR: c0015fbc
REGS: c21d5e60 TRAP: 0200 Not tainted (2.6.22-1-powerpc)
MSR: 00141030 <ME,IR,DR> CR: 24000082 XER: 20000000
TASK = cfd9cc70[1515] 'scsi_eh_1' THREAD: c21d4000
GPR00: 00000000 c21d5f10 cfd9cc70 00000000 f209e008 f2528ca8 f2525468 f2524c38
GPR08: 00000000 f21de2c8 00800000 c0015fbc 00000000 00000000 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 016c759c 41400000
GPR24: f2528474 f2524c38 f2525468 f2528ca8 00009032 00000000 efd78a30 efd78000
NIP [c0015fc4] ioread8+0x8/0x18
LR [f252d564] ata_altstatus+0x30/0x44 [libata]
Call Trace:
[c21d5f20] [f252d6a8] ata_bmdma_drive_eh+0xd0/0x148 [libata]
[c21d5f50] [f253004c] ata_scsi_error+0x1f4/0x450 [libata]
[c21d5f80] [f246aac4] scsi_error_handler+0xd0/0x4f0 [scsi_mod]
[c21d5fd0] [c0041004] kthread+0x4c/0x88
[c21d5ff0] [c0013774] kernel_thread+0x44/0x60
Instruction dump:
2f84011e 38600004 4d9a0020 419e0014 38600000 4e800020 38600002 4e800020
38600003 4e800020 7c0004ac 88630000 <0c030000> 4c00012c 5463063e 4e800020
-- Package-specific info:
** Version:
Linux version 2.6.22-1-powerpc (Debian 2.6.22-3) (waldi@debian.org) (gcc version 4.1.3 20070718 (prerelease) (Debian 4.1.2-14)) #1 Sun Jul 29 13:58:06 CEST 2007
** Not tainted
** Kernel log:
ata2: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0x2 frozen
ata2: hard resetting port
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata1: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0x2 frozen
ata1: hard resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1: EH complete
ata1: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0x2 frozen
ata1: hard resetting port
ata1: SATA link down (SStatus 0 SControl 310)
ata1: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0x2 frozen
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.00: ATA-7: WDC WD3200AAKS-00SBA0, 12.01B01, max UDMA/133
ata2.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/100
ata2: EH complete
scsi 1:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 1:0:0:0: [sda] Attached SCSI disk
XFS mounting filesystem sda1
Starting XFS recovery on filesystem: sda1 (logdev: internal)
Ending XFS recovery on filesystem: sda1 (logdev: internal)
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x280000 action 0x0
ata2.00: (BMDMA2 stat 0xc0009)
ata2.00: cmd c8/00:1e:11:c0:7c/00:00:00:00:00/e1 tag 0 cdb 0x0 data 15360 in
res 51/00:00:01:00:00/00:00:00:00:00/e1 Emask 0x1 (device error)
ata2.00: configured for UDMA/100
ata2: EH complete
sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x280000 action 0x0
ata2.00: (BMDMA2 stat 0xc0009)
ata2.00: cmd c8/00:02:8f:58:9b/00:00:00:00:00/e1 tag 0 cdb 0x0 data 1024 in
res 51/00:00:01:00:00/00:00:00:00:00/e1 Emask 0x1 (device error)
ata2.00: configured for UDMA/100
ata2: EH complete
sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x280000 action 0x0
ata2.00: (BMDMA2 stat 0xd0009)
ata2.00: cmd c8/00:1e:21:bd:a7/00:00:00:00:00/e1 tag 0 cdb 0x0 data 15360 in
res 51/00:00:01:00:00/00:00:00:00:00/e1 Emask 0x1 (device error)
ata2.00: configured for UDMA/100
ata2: EH complete
sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x280000 action 0x0
ata2.00: (BMDMA2 stat 0xc0009)
ata2.00: cmd c8/00:02:ff:c7:a8/00:00:00:00:00/e1 tag 0 cdb 0x0 data 1024 in
res 51/00:00:01:00:00/00:00:00:00:00/e1 Emask 0x1 (device error)
ata2.00: configured for UDMA/100
ata2: EH complete
sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Machine check in kernel mode.
Caused by (from SRR1=141030): Transfer error ack signal
Oops: Machine check, sig: 7 [#1]
PowerMac
Modules linked in: sd_mod nfsd exportfs lp parport cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_ondemand cpufreq_conservative nfs lockd nfs_acl sunrpc ipv6 ext2 mbcache sha256 aes cbc blkcipher dm_crypt dm_snapshot dm_mirror dm_mod firewire_sbp2 loop sata_sil libata scsi_mod pcmcia firmware_class snd_aoa_i2sbus snd_pcm snd_timer snd_page_alloc snd soundcore snd_aoa_soundbus yenta_socket rsrc_nonstatic pcmcia_core uninorth_agp agpgart tsdev evdev xfs ide_cd cdrom ide_disk sungem sungem_phy firewire_ohci firewire_core crc_itu_t i2c_powermac
NIP: c0015fc4 LR: f252d564 CTR: c0015fbc
REGS: c21d5e60 TRAP: 0200 Not tainted (2.6.22-1-powerpc)
MSR: 00141030 <ME,IR,DR> CR: 24000082 XER: 20000000
TASK = cfd9cc70[1515] 'scsi_eh_1' THREAD: c21d4000
GPR00: 00000000 c21d5f10 cfd9cc70 00000000 f209e008 f2528ca8 f2525468 f2524c38
GPR08: 00000000 f21de2c8 00800000 c0015fbc 00000000 00000000 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 016c759c 41400000
GPR24: f2528474 f2524c38 f2525468 f2528ca8 00009032 00000000 efd78a30 efd78000
NIP [c0015fc4] ioread8+0x8/0x18
LR [f252d564] ata_altstatus+0x30/0x44 [libata]
Call Trace:
[c21d5f20] [f252d6a8] ata_bmdma_drive_eh+0xd0/0x148 [libata]
[c21d5f50] [f253004c] ata_scsi_error+0x1f4/0x450 [libata]
[c21d5f80] [f246aac4] scsi_error_handler+0xd0/0x4f0 [scsi_mod]
[c21d5fd0] [c0041004] kthread+0x4c/0x88
[c21d5ff0] [c0013774] kernel_thread+0x44/0x60
Instruction dump:
2f84011e 38600004 4d9a0020 419e0014 38600000 4e800020 38600002 4e800020
38600003 4e800020 7c0004ac 88630000 <0c030000> 4c00012c 5463063e 4e800020
** Loaded modules:
Module Size Used by
sd_mod 32688 2
nfsd 245296 13
exportfs 6272 1 nfsd
lp 13516 0
parport 43248 1 lp
cpufreq_userspace 4564 0
cpufreq_stats 6148 0
cpufreq_powersave 1792 0
cpufreq_ondemand 9128 0
cpufreq_conservative 8064 0
nfs 281736 0
lockd 77592 3 nfsd,nfs
nfs_acl 4000 2 nfsd,nfs
sunrpc 198948 11 nfsd,nfs,lockd,nfs_acl
ipv6 290892 42
ext2 77832 1
mbcache 9540 1 ext2
sha256 9664 0
aes 27528 4
cbc 5184 2
blkcipher 7780 1 cbc
dm_crypt 16328 1
dm_snapshot 20480 0
dm_mirror 24896 0
dm_mod 65600 7 dm_crypt,dm_snapshot,dm_mirror
firewire_sbp2 13732 0
loop 21412 0
sata_sil 12968 1
libata 137088 1 sata_sil
scsi_mod 181100 3 sd_mod,firewire_sbp2,libata
pcmcia 45936 0
firmware_class 11232 1 pcmcia
snd_aoa_i2sbus 24388 0
snd_pcm 92324 1 snd_aoa_i2sbus
snd_timer 26084 1 snd_pcm
snd_page_alloc 11272 1 snd_pcm
snd 67476 3 snd_aoa_i2sbus,snd_pcm,snd_timer
soundcore 8900 1 snd
snd_aoa_soundbus 7908 1 snd_aoa_i2sbus
yenta_socket 29740 2
rsrc_nonstatic 12704 1 yenta_socket
pcmcia_core 47096 3 pcmcia,yenta_socket,rsrc_nonstatic
uninorth_agp 11724 1
agpgart 40284 1 uninorth_agp
tsdev 9504 0
evdev 12416 0
xfs 542908 4
ide_cd 47236 0
cdrom 43196 1 ide_cd
ide_disk 19904 7
sungem 35140 0
sungem_phy 12896 1 sungem
firewire_ohci 20544 0
firewire_core 49528 2 firewire_sbp2,firewire_ohci
crc_itu_t 2080 1 firewire_core
i2c_powermac 5952 0
** PCI devices:
0000:00:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 1.5 AGP [106b:002d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 16, Cache Line Size: 32 bytes
Capabilities: <access denied>
0000:00:10.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon Mobility M6 LY [1002:4c59] (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Radeon Mobility M6 LY [1002:4c59]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 255 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at b8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 0400 [size=256]
Region 2: Memory at b0000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at f1000000 [size=128K]
Capabilities: <access denied>
0001:10:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 1.5 PCI [106b:002e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort+ >SERR- <PERR-
Latency: 16, Cache Line Size: 32 bytes
0001:10:17.0 Unknown class [ff00]: Apple Computer Inc. KeyLargo Mac I/O [106b:0022] (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 16, Cache Line Size: 32 bytes
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
0001:10:18.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo USB [106b:0019] (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 16 (750ns min, 21500ns max)
Interrupt: pin A routed to IRQ 27
Region 0: Memory at a0002000 (32-bit, non-prefetchable) [size=4K]
0001:10:19.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo USB [106b:0019] (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 16 (750ns min, 21500ns max)
Interrupt: pin A routed to IRQ 28
Region 0: Memory at a0001000 (32-bit, non-prefetchable) [size=4K]
0001:10:1a.0 CardBus bridge [0607]: Texas Instruments PCI1410 PC card Cardbus Controller [104c:ac50] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort+ <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 58
Region 0: Memory at a0000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=10, secondary=11, subordinate=14, sec-latency=176
Memory window 0: 90000000-9ffff000 (prefetchable)
Memory window 1: f3000000-f33ff000
I/O window 0: 00001000-00008fff
I/O window 1: 00009000-000091ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
0001:11:00.0 Mass storage controller [0180]: Silicon Image, Inc. SiI 3512 [SATALink/SATARaid] Serial ATA Controller [1095:3512] (rev 01)
Subsystem: Silicon Image, Inc. SiI 3512 SATALink Controller [1095:3512]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort+ <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 58
Region 0: I/O ports at 1010 [size=8]
Region 1: I/O ports at 1020 [size=4]
Region 2: I/O ports at 1018 [size=8]
Region 3: I/O ports at 1024 [size=4]
Region 4: I/O ports at 1000 [size=16]
Region 5: Memory at f3000000 (32-bit, non-prefetchable) [size=512]
[virtual] Expansion ROM at 90000000 [disabled] [size=512K]
Capabilities: <access denied>
0002:24:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 1.5 Internal PCI [106b:002f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 16, Cache Line Size: 32 bytes
0002:24:0e.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW323 [11c1:5811] (prog-if 10 [OHCI])
Subsystem: Agere Systems FW323 [11c1:5811]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 16 (3000ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
0002:24:0f.0 Ethernet controller [0200]: Apple Computer Inc. UniNorth GMAC (Sun GEM) [106b:0021] (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f5200000 (32-bit, non-prefetchable) [size=2M]
Expansion ROM at f5100000 [disabled] [size=1M]
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable')
Architecture: powerpc (ppc)
Kernel: Linux 2.6.22-1-powerpc
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.22-1-powerpc depends on:
ii initramfs-tools [linux-initr 0.89 tools for generating an initramfs
ii mkvmlinuz 33 create a kernel to boot a PowerPC
ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo
linux-image-2.6.22-1-powerpc recommends no packages.
-- debconf information:
linux-image-2.6.22-1-powerpc/preinst/abort-overwrite-2.6.22-1-powerpc:
linux-image-2.6.22-1-powerpc/postinst/bootloader-error-2.6.22-1-powerpc:
linux-image-2.6.22-1-powerpc/postinst/depmod-error-initrd-2.6.22-1-powerpc: false
linux-image-2.6.22-1-powerpc/preinst/lilo-has-ramdisk:
linux-image-2.6.22-1-powerpc/postinst/kimage-is-a-directory:
linux-image-2.6.22-1-powerpc/prerm/removing-running-kernel-2.6.22-1-powerpc: true
linux-image-2.6.22-1-powerpc/postinst/create-kimage-link-2.6.22-1-powerpc: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.22-1-powerpc/preinst/lilo-initrd-2.6.22-1-powerpc: true
linux-image-2.6.22-1-powerpc/postinst/old-system-map-link-2.6.22-1-powerpc: true
linux-image-2.6.22-1-powerpc/preinst/initrd-2.6.22-1-powerpc:
linux-image-2.6.22-1-powerpc/preinst/already-running-this-2.6.22-1-powerpc:
linux-image-2.6.22-1-powerpc/postinst/bootloader-test-error-2.6.22-1-powerpc:
linux-image-2.6.22-1-powerpc/preinst/failed-to-move-modules-2.6.22-1-powerpc:
linux-image-2.6.22-1-powerpc/preinst/bootloader-initrd-2.6.22-1-powerpc: true
linux-image-2.6.22-1-powerpc/prerm/would-invalidate-boot-loader-2.6.22-1-powerpc: true
linux-image-2.6.22-1-powerpc/postinst/depmod-error-2.6.22-1-powerpc: false
linux-image-2.6.22-1-powerpc/postinst/old-dir-initrd-link-2.6.22-1-powerpc: true
linux-image-2.6.22-1-powerpc/postinst/old-initrd-link-2.6.22-1-powerpc: true
linux-image-2.6.22-1-powerpc/preinst/overwriting-modules-2.6.22-1-powerpc: true
linux-image-2.6.22-1-powerpc/preinst/elilo-initrd-2.6.22-1-powerpc: true
linux-image-2.6.22-1-powerpc/preinst/abort-install-2.6.22-1-powerpc:
Reply to: