Bug#403183: similar issue with SMC ethernet card seems to be fixed in 2.6.21.1
Hello,
I bumped to this issue too with an SMC 10/100 ethernet PCMCIA card when
a sarge Lifebook got upgraded to etch. The card:
PRODID_1=""
PRODID_2=""
PRODID_3=""
PRODID_4=""
MANFID=0000,0000
FUNCID=255
PRODID_1="SMC"
PRODID_2="8041TX-10/100-PC-Card-V2"
PRODID_3=""
PRODID_4=""
MANFID=01bf,8041
FUNCID=6
What seems strange is that the card works in single user mode, but stops
working in runlevel 2 with transmit time out and lost interrupt
messages until this Lifebook just hangs:
May 8 22:40:21 luppakorva kernel: klogd 1.4.1#18, log source = /proc/kmsg started.
May 8 22:40:21 luppakorva kernel: Linux version 2.6.18-4-686 (Debian 2.6.18.dfsg.1-12) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Mon Mar 26 17:17:36 UTC 2007
May 8 22:40:21 luppakorva kernel: BIOS-provided physical RAM map:
May 8 22:40:21 luppakorva kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
May 8 22:40:21 luppakorva kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
May 8 22:40:21 luppakorva kernel: BIOS-e820: 00000000000ea000 - 0000000000100000 (reserved)
May 8 22:40:21 luppakorva kernel: BIOS-e820: 0000000000100000 - 000000000bfe0000 (usable)
May 8 22:40:21 luppakorva kernel: BIOS-e820: 000000000bfe0000 - 000000000bfefc00 (ACPI data)
May 8 22:40:21 luppakorva kernel: BIOS-e820: 000000000bfefc00 - 000000000bff0000 (ACPI NVS)
May 8 22:40:21 luppakorva kernel: BIOS-e820: 000000000bff0000 - 000000000bff1000 (reserved)
May 8 22:40:21 luppakorva kernel: BIOS-e820: 000000000bff1000 - 000000000c000000 (usable)
May 8 22:40:21 luppakorva kernel: BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
May 8 22:40:21 luppakorva kernel: 0MB HIGHMEM available.
May 8 22:40:21 luppakorva kernel: 192MB LOWMEM available.
May 8 22:40:21 luppakorva kernel: On node 0 totalpages: 49152
May 8 22:40:21 luppakorva kernel: DMA zone: 4096 pages, LIFO batch:0
May 8 22:40:21 luppakorva kernel: Normal zone: 45056 pages, LIFO batch:15
May 8 22:40:21 luppakorva kernel: DMI 2.3 present.
May 8 22:40:21 luppakorva kernel: ACPI: RSDP (v000 FUJ ) @ 0x000f66f0
May 8 22:40:21 luppakorva kernel: ACPI: RSDT (v001 FUJ BISCAYNE 0x01090000 FUJ 0x00001000) @ 0x0bfeb990
May 8 22:40:21 luppakorva kernel: ACPI: FADT (v001 FUJ BISCAYNE 0x01090000 FUJ 0x00001000) @ 0x0bfefb8c
May 8 22:40:21 luppakorva kernel: ACPI: DSDT (v001 FUJ BISCAYNE 0x01090000 MSFT 0x01000007) @ 0x00000000
May 8 22:40:21 luppakorva kernel: ACPI: PM-Timer IO Port: 0xff08
May 8 22:40:21 luppakorva kernel: Allocating PCI resources starting at 10000000 (gap: 0c000000:f3f00000)
May 8 22:40:21 luppakorva kernel: Detected 448.831 MHz processor.
May 8 22:40:21 luppakorva kernel: Built 1 zonelists. Total pages: 49152
May 8 22:40:21 luppakorva kernel: Kernel command line: root=/dev/hda2 ro acpi=force
May 8 22:40:21 luppakorva kernel: Local APIC disabled by BIOS -- you can enable it with "lapic"
May 8 22:40:21 luppakorva kernel: mapped APIC to ffffd000 (01189000)
May 8 22:40:21 luppakorva kernel: Enabling fast FPU save and restore... done.
May 8 22:40:21 luppakorva kernel: Enabling unmasked SIMD FPU exception support... done.
May 8 22:40:21 luppakorva kernel: Initializing CPU#0
May 8 22:40:21 luppakorva kernel: PID hash table entries: 1024 (order: 10, 4096 bytes)
May 8 22:40:21 luppakorva kernel: Console: colour VGA+ 80x25
May 8 22:40:21 luppakorva kernel: Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
May 8 22:40:21 luppakorva kernel: Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
May 8 22:40:21 luppakorva kernel: Memory: 187184k/196608k available (1544k kernel code, 8800k reserved, 577k data, 196k init, 0k highmem)
May 8 22:40:21 luppakorva kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
May 8 22:40:21 luppakorva kernel: Calibrating delay using timer specific routine.. 898.49 BogoMIPS (lpj=1796982)
May 8 22:40:21 luppakorva kernel: Security Framework v1.0.0 initialized
May 8 22:40:21 luppakorva kernel: SELinux: Disabled at boot.
May 8 22:40:21 luppakorva kernel: Capability LSM initialized
May 8 22:40:21 luppakorva kernel: Mount-cache hash table entries: 512
May 8 22:40:21 luppakorva kernel: CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
May 8 22:40:21 luppakorva kernel: CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
May 8 22:40:21 luppakorva kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
May 8 22:40:21 luppakorva kernel: CPU: L2 cache: 256K
May 8 22:40:21 luppakorva kernel: CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
May 8 22:40:21 luppakorva kernel: Intel machine check architecture supported.
May 8 22:40:21 luppakorva kernel: Intel machine check reporting enabled on CPU#0.
May 8 22:40:21 luppakorva kernel: Compat vDSO mapped to ffffe000.
May 8 22:40:21 luppakorva kernel: Checking 'hlt' instruction... OK.
May 8 22:40:21 luppakorva kernel: SMP alternatives: switching to UP code
May 8 22:40:21 luppakorva kernel: Freeing SMP alternatives: 16k freed
May 8 22:40:21 luppakorva kernel: ACPI: Core revision 20060707
May 8 22:40:21 luppakorva kernel: CPU0: Intel Pentium III (Coppermine) stepping 01
May 8 22:40:21 luppakorva kernel: SMP motherboard not detected.
May 8 22:40:21 luppakorva kernel: Local APIC not detected. Using dummy APIC emulation.
May 8 22:40:21 luppakorva kernel: Brought up 1 CPUs
May 8 22:40:21 luppakorva kernel: migration_cost=0
May 8 22:40:21 luppakorva kernel: checking if image is initramfs... it is
May 8 22:40:21 luppakorva kernel: Freeing initrd memory: 4377k freed
May 8 22:40:21 luppakorva kernel: NET: Registered protocol family 16
May 8 22:40:21 luppakorva kernel: ACPI: bus type pci registered
May 8 22:40:21 luppakorva kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd9ae, last bus=3
May 8 22:40:21 luppakorva kernel: PCI: Using configuration type 1
May 8 22:40:21 luppakorva kernel: Setting up standard PCI resources
May 8 22:40:21 luppakorva kernel: ACPI: Interpreter enabled
May 8 22:40:21 luppakorva kernel: ACPI: Using PIC for interrupt routing
May 8 22:40:21 luppakorva kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
May 8 22:40:21 luppakorva kernel: PCI: Probing PCI hardware (bus 00)
May 8 22:40:21 luppakorva kernel: ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
May 8 22:40:21 luppakorva kernel: PCI quirk: region ff00-ff3f claimed by PIIX4 ACPI
May 8 22:40:21 luppakorva kernel: PCI quirk: region ff80-ff8f claimed by PIIX4 SMB
May 8 22:40:21 luppakorva kernel: PIIX4 devres B PIO at fd60-fd67
May 8 22:40:21 luppakorva kernel: Boot video device is 0000:01:00.0
May 8 22:40:21 luppakorva kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
May 8 22:40:21 luppakorva kernel: ACPI: Embedded Controller [EC] (gpe 0) interrupt mode.
May 8 22:40:21 luppakorva kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11)
May 8 22:40:21 luppakorva kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11)
May 8 22:40:21 luppakorva kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11) *0, disabled.
May 8 22:40:21 luppakorva kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11)
May 8 22:40:21 luppakorva kernel: ACPI: Power Resource [PFAN] (off)
May 8 22:40:21 luppakorva kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
May 8 22:40:21 luppakorva kernel: pnp: PnP ACPI init
May 8 22:40:21 luppakorva kernel: pnp: PnP ACPI: found 11 devices
May 8 22:40:21 luppakorva kernel: PnPBIOS: Disabled by ACPI PNP
May 8 22:40:21 luppakorva kernel: PCI: Using ACPI for IRQ routing
May 8 22:40:21 luppakorva kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
May 8 22:40:21 luppakorva kernel: pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
May 8 22:40:21 luppakorva kernel: pnp: 00:01: ioport range 0xff00-0xff3f could not be reserved
May 8 22:40:21 luppakorva kernel: pnp: 00:01: ioport range 0xf800-0xf87f has been reserved
May 8 22:40:21 luppakorva kernel: PCI: Bridge: 0000:00:01.0
May 8 22:40:21 luppakorva kernel: IO window: 2000-2fff
May 8 22:40:21 luppakorva kernel: MEM window: f4000000-f5ffffff
May 8 22:40:21 luppakorva kernel: PREFETCH window: 18000000-180fffff
May 8 22:40:21 luppakorva kernel: PCI: Bus 2, cardbus bridge: 0000:00:0f.0
May 8 22:40:21 luppakorva kernel: IO window: 00001800-000018ff
May 8 22:40:21 luppakorva kernel: IO window: 00001c00-00001cff
May 8 22:40:21 luppakorva kernel: PREFETCH window: 10000000-11ffffff
May 8 22:40:21 luppakorva kernel: MEM window: 12000000-13ffffff
May 8 22:40:21 luppakorva kernel: PCI: Bus 6, cardbus bridge: 0000:00:0f.1
May 8 22:40:21 luppakorva kernel: IO window: 00003000-000030ff
May 8 22:40:21 luppakorva kernel: IO window: 00003400-000034ff
May 8 22:40:21 luppakorva kernel: PREFETCH window: 14000000-15ffffff
May 8 22:40:21 luppakorva kernel: MEM window: 16000000-17ffffff
May 8 22:40:21 luppakorva kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
May 8 22:40:21 luppakorva kernel: PCI: setting IRQ 9 as level-triggered
May 8 22:40:21 luppakorva kernel: ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
May 8 22:40:21 luppakorva kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
May 8 22:40:21 luppakorva kernel: ACPI: PCI Interrupt 0000:00:0f.1[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
May 8 22:40:21 luppakorva kernel: NET: Registered protocol family 2
May 8 22:40:21 luppakorva kernel: IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
May 8 22:40:21 luppakorva kernel: TCP established hash table entries: 8192 (order: 4, 65536 bytes)
May 8 22:40:21 luppakorva kernel: TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
May 8 22:40:21 luppakorva kernel: TCP: Hash tables configured (established 8192 bind 4096)
May 8 22:40:21 luppakorva kernel: TCP reno registered
May 8 22:40:21 luppakorva kernel: audit: initializing netlink socket (disabled)
May 8 22:40:21 luppakorva kernel: audit(1178663983.332:1): initialized
May 8 22:40:21 luppakorva kernel: VFS: Disk quotas dquot_6.5.1
May 8 22:40:21 luppakorva kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
May 8 22:40:21 luppakorva kernel: Initializing Cryptographic API
May 8 22:40:21 luppakorva kernel: io scheduler noop registered
May 8 22:40:21 luppakorva kernel: io scheduler anticipatory registered
May 8 22:40:21 luppakorva kernel: io scheduler deadline registered
May 8 22:40:21 luppakorva kernel: io scheduler cfq registered (default)
May 8 22:40:21 luppakorva kernel: Limiting direct PCI/PCI transfers.
May 8 22:40:21 luppakorva kernel: isapnp: Scanning for PnP cards...
May 8 22:40:21 luppakorva kernel: isapnp: No Plug & Play device found
May 8 22:40:21 luppakorva kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
May 8 22:40:21 luppakorva kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
May 8 22:40:21 luppakorva kernel: serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
May 8 22:40:21 luppakorva kernel: 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
May 8 22:40:21 luppakorva kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
May 8 22:40:21 luppakorva kernel: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
May 8 22:40:21 luppakorva kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
May 8 22:40:21 luppakorva kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
May 8 22:40:21 luppakorva kernel: mice: PS/2 mouse device common for all mice
May 8 22:40:21 luppakorva kernel: TCP bic registered
May 8 22:40:21 luppakorva kernel: NET: Registered protocol family 1
May 8 22:40:21 luppakorva kernel: NET: Registered protocol family 17
May 8 22:40:21 luppakorva kernel: NET: Registered protocol family 8
May 8 22:40:21 luppakorva kernel: NET: Registered protocol family 20
May 8 22:40:21 luppakorva kernel: Using IPI No-Shortcut mode
May 8 22:40:21 luppakorva kernel: ACPI: (supports S0 S1 S3 S4 S5)
May 8 22:40:21 luppakorva kernel: Freeing unused kernel memory: 196k freed
May 8 22:40:21 luppakorva kernel: Time: tsc clocksource has been installed.
May 8 22:40:21 luppakorva kernel: input: AT Translated Set 2 keyboard as /class/input/input0
May 8 22:40:21 luppakorva kernel: ACPI: Transitioning device [FAN] to D3
May 8 22:40:21 luppakorva kernel: ACPI: Transitioning device [FAN] to D3
May 8 22:40:21 luppakorva kernel: ACPI: Fan [FAN] (off)
May 8 22:40:21 luppakorva kernel: ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
May 8 22:40:21 luppakorva kernel: ACPI: Processor [CPU0] (supports 8 throttling states)
May 8 22:40:21 luppakorva kernel: Time: acpi_pm clocksource has been installed.
May 8 22:40:21 luppakorva kernel: ACPI: Thermal Zone [TZ1] (48 C)
May 8 22:40:21 luppakorva kernel: ACPI: Thermal Zone [TZ2] (47 C)
May 8 22:40:21 luppakorva kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
May 8 22:40:21 luppakorva kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
May 8 22:40:21 luppakorva kernel: PIIX4: IDE controller at PCI slot 0000:00:07.1
May 8 22:40:21 luppakorva kernel: PIIX4: chipset revision 1
May 8 22:40:21 luppakorva kernel: PIIX4: not 100%% native mode: will probe irqs later
May 8 22:40:21 luppakorva kernel: ide0: BM-DMA at 0x1420-0x1427, BIOS settings: hda:DMA, hdb:pio
May 8 22:40:21 luppakorva kernel: ide1: BM-DMA at 0x1428-0x142f, BIOS settings: hdc:DMA, hdd:pio
May 8 22:40:21 luppakorva kernel: Probing IDE interface ide0...
May 8 22:40:21 luppakorva kernel: usbcore: registered new driver usbfs
May 8 22:40:21 luppakorva kernel: usbcore: registered new driver hub
May 8 22:40:21 luppakorva kernel: USB Universal Host Controller Interface driver v3.0
May 8 22:40:21 luppakorva kernel: hda: FUJITSU MHH2064AT, ATA DISK drive
May 8 22:40:21 luppakorva kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
May 8 22:40:21 luppakorva kernel: Probing IDE interface ide1...
May 8 22:40:21 luppakorva kernel: hdc: UJDA170, ATAPI CD/DVD-ROM drive
May 8 22:40:21 luppakorva kernel: ide1 at 0x170-0x177,0x376 on irq 15
May 8 22:40:21 luppakorva kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
May 8 22:40:21 luppakorva kernel: ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
May 8 22:40:21 luppakorva kernel: uhci_hcd 0000:00:07.2: UHCI Host Controller
May 8 22:40:21 luppakorva kernel: uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
May 8 22:40:21 luppakorva kernel: uhci_hcd 0000:00:07.2: irq 9, io base 0x00001400
May 8 22:40:21 luppakorva kernel: usb usb1: configuration #1 chosen from 1 choice
May 8 22:40:21 luppakorva kernel: hub 1-0:1.0: USB hub found
May 8 22:40:21 luppakorva kernel: hub 1-0:1.0: 2 ports detected
May 8 22:40:21 luppakorva kernel: hda: max request size: 128KiB
May 8 22:40:21 luppakorva kernel: hda: 12685680 sectors (6495 MB) w/512KiB Cache, CHS=13424/15/63, UDMA(33)
May 8 22:40:21 luppakorva kernel: hda: cache flushes not supported
May 8 22:40:21 luppakorva kernel: hda: hda1 hda2 hda3 hda4 < hda5 >
May 8 22:40:21 luppakorva kernel: hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
May 8 22:40:21 luppakorva kernel: Uniform CD-ROM driver Revision: 3.20
May 8 22:40:21 luppakorva kernel: Attempting manual resume
May 8 22:40:21 luppakorva kernel: kjournald starting. Commit interval 5 seconds
May 8 22:40:21 luppakorva kernel: EXT3-fs: mounted filesystem with ordered data mode.
May 8 22:40:21 luppakorva kernel: Real Time Clock Driver v1.12ac
May 8 22:40:21 luppakorva kernel: input: PC Speaker as /class/input/input1
May 8 22:40:21 luppakorva kernel: Yenta: CardBus bridge found at 0000:00:0f.0 [10cf:109a]
May 8 22:40:21 luppakorva kernel: Linux agpgart interface v0.101 (c) Dave Jones
May 8 22:40:21 luppakorva kernel: Yenta: ISA IRQ mask 0x0cb8, PCI irq 9
May 8 22:40:21 luppakorva kernel: Socket status: 30000006
May 8 22:40:21 luppakorva kernel: Yenta: CardBus bridge found at 0000:00:0f.1 [10cf:109a]
May 8 22:40:21 luppakorva kernel: Floppy drive(s): fd0 is 1.44M
May 8 22:40:21 luppakorva kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
May 8 22:40:21 luppakorva kernel: FDC 0 is a post-1991 82077
May 8 22:40:21 luppakorva kernel: Yenta: ISA IRQ mask 0x0cb8, PCI irq 9
May 8 22:40:21 luppakorva kernel: Socket status: 30000410
May 8 22:40:21 luppakorva kernel: agpgart: Detected an Intel 440BX Chipset.
May 8 22:40:21 luppakorva kernel: agpgart: AGP aperture is 64M @ 0xf8000000
May 8 22:40:21 luppakorva kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
May 8 22:40:21 luppakorva kernel: irda_init()
May 8 22:40:21 luppakorva kernel: NET: Registered protocol family 23
May 8 22:40:21 luppakorva kernel: piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
May 8 22:40:21 luppakorva kernel: input: PS/2 Mouse as /class/input/input2
May 8 22:40:21 luppakorva kernel: input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
May 8 22:40:21 luppakorva kernel: pccard: PCMCIA card inserted into slot 1
May 8 22:40:21 luppakorva kernel: ts: Compaq touchscreen protocol output
May 8 22:40:21 luppakorva kernel: cs: IO port probe 0x100-0x4ff: clean.
May 8 22:40:21 luppakorva kernel: cs: IO port probe 0x800-0x8ff: clean.
May 8 22:40:21 luppakorva kernel: cs: IO port probe 0xc00-0xcff: clean.
May 8 22:40:21 luppakorva kernel: cs: IO port probe 0xa00-0xaff: clean.
May 8 22:40:21 luppakorva kernel: cs: IO port probe 0x100-0x4ff: clean.
May 8 22:40:21 luppakorva kernel: cs: IO port probe 0x800-0x8ff: clean.
May 8 22:40:21 luppakorva kernel: cs: IO port probe 0xc00-0xcff: clean.
May 8 22:40:21 luppakorva kernel: cs: IO port probe 0xa00-0xaff: clean.
May 8 22:40:21 luppakorva kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
May 8 22:40:21 luppakorva kernel: pcmcia: registering new device pcmcia1.0
May 8 22:40:21 luppakorva kernel: ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
May 8 22:40:21 luppakorva kernel: es1968: not attempting power management.
May 8 22:40:21 luppakorva kernel: eth0: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:04:E2:B7:6E:5D
May 8 22:40:21 luppakorva kernel: es1968: clocking to 48000
May 8 22:40:21 luppakorva kernel: Linux video capture interface: v2.00
May 8 22:40:21 luppakorva kernel: Adding 105832k swap on /dev/hda3. Priority:-1 extents:1 across:105832k
May 8 22:40:21 luppakorva kernel: EXT3 FS on hda2, internal journal
May 8 22:40:21 luppakorva kernel: fuse init (API version 7.7)
May 8 22:40:21 luppakorva kernel: IrCOMM protocol (Dag Brattli)
May 8 22:40:21 luppakorva kernel: device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
May 8 22:40:21 luppakorva kernel: kjournald starting. Commit interval 5 seconds
May 8 22:40:21 luppakorva kernel: EXT3 FS on hda5, internal journal
May 8 22:40:21 luppakorva kernel: EXT3-fs: mounted filesystem with ordered data mode.
May 8 22:40:21 luppakorva kernel: kjournald starting. Commit interval 5 seconds
May 8 22:40:21 luppakorva kernel: EXT3 FS on hda1, internal journal
May 8 22:40:21 luppakorva kernel: EXT3-fs: mounted filesystem with ordered data mode.
May 8 22:40:21 luppakorva kernel: pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover.
May 8 22:40:21 luppakorva kernel: pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
May 8 22:40:21 luppakorva kernel: pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
May 8 22:40:21 luppakorva kernel: NET: Registered protocol family 10
May 8 22:40:21 luppakorva kernel: lo: Disabled Privacy Extensions
May 8 22:40:21 luppakorva kernel: IPv6 over IPv4 tunneling driver
May 8 22:40:21 luppakorva kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
May 8 22:40:21 luppakorva kernel: ACPI: Battery Slot [CMB1] (battery present)
May 8 22:40:21 luppakorva kernel: ACPI: Battery Slot [CMB2] (battery absent)
May 8 22:40:21 luppakorva kernel: ACPI: AC Adapter [AC] (on-line)
May 8 22:40:22 luppakorva kernel: ACPI: Power Button (FF) [PWRF]
May 8 22:40:22 luppakorva kernel: ACPI: Power Button (CM) [PWRB]
May 8 22:40:22 luppakorva kernel: ACPI: Lid Switch [LID]
May 8 22:40:27 luppakorva kernel: eth0: no IPv6 routers present
May 8 22:40:18 luppakorva kernel: sirdev_get_instance - ttyS3
May 8 22:40:18 luppakorva kernel: irtty_open - ttyS3: irda line discipline opened
May 8 22:40:19 luppakorva kernel: irlap_change_speed(), setting speed to 9600
May 8 22:43:09 luppakorva kernel: NETDEV WATCHDOG: eth0: transmit timed out
May 8 22:43:09 luppakorva kernel: eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=66.
May 8 22:43:09 luppakorva kernel: NETDEV WATCHDOG: eth0: transmit timed out
May 8 22:43:09 luppakorva kernel: eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x2, t=97.
May 8 22:43:10 luppakorva kernel: NETDEV WATCHDOG: eth0: transmit timed out
May 8 22:43:10 luppakorva kernel: eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x2, t=96.
May 8 22:43:10 luppakorva kernel: eth0: interrupt(s) dropped!
May 8 22:43:14 luppakorva kernel: eth0: no IPv6 routers present
May 8 22:48:07 luppakorva kernel: NETDEV WATCHDOG: eth0: transmit timed out
May 8 22:48:07 luppakorva kernel: eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=86.
May 8 22:48:08 luppakorva kernel: NETDEV WATCHDOG: eth0: transmit timed out
May 8 22:48:08 luppakorva kernel: eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=85.
May 8 22:48:09 luppakorva kernel: NETDEV WATCHDOG: eth0: transmit timed out
May 8 22:48:09 luppakorva kernel: eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=217.
May 8 22:48:10 luppakorva kernel: eth0: interrupt(s) dropped!
May 8 22:50:13 luppakorva kernel: NETDEV WATCHDOG: eth0: transmit timed out
May 8 22:50:13 luppakorva kernel: eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=223.
May 8 22:50:13 luppakorva kernel: eth0: interrupt(s) dropped!
May 8 22:53:39 luppakorva kernel: NETDEV WATCHDOG: eth0: transmit timed out
May 8 22:53:39 luppakorva kernel: eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=84.
May 8 22:53:40 luppakorva kernel: eth0: interrupt(s) dropped!
May 8 22:55:51 luppakorva kernel: klogd 1.4.1#18, log source = /proc/kmsg started.
May 8 22:55:51 luppakorva kernel: Linux version 2.6.18-4-686 (Debian 2.6.18.dfsg.1-12) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Mon Mar 26 17:17:36 UTC 2007
The Lifebook has these chips:
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
Subsystem: Fujitsu Limited. Unknown device 1039
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f4000000-f5ffffff
Prefetchable memory behind bridge: 18000000-180fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+
00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at 1420 [size=16]
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at 1400 [size=32]
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:0d.0 Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev 10)
Subsystem: Fujitsu Limited. Unknown device 1053
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at 1000 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
Subsystem: Fujitsu Limited. Unknown device 109a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 9
Region 0: Memory at 18100000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 10000000-11fff000 (prefetchable)
Memory window 1: 12000000-13fff000
I/O window 0: 00001800-000018ff
I/O window 1: 00001c00-00001cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
00:0f.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
Subsystem: Fujitsu Limited. Unknown device 109a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin B routed to IRQ 9
Region 0: Memory at 18101000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 14000000-15fff000 (prefetchable)
Memory window 1: 16000000-17fff000
I/O window 0: 00003000-000030ff
I/O window 1: 00003400-000034ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64) (prog-if 00 [VGA])
Subsystem: Fujitsu Limited. Unknown device 1074
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at f4000000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 18000000 [disabled] [size=128K]
Capabilities: [50] AGP version 1.0
Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [5c] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
If I boot without the PCMCIA card and attach it later I get an oops:
May 10 23:16:31 luppakorva kernel: pccard: PCMCIA card inserted into
slot 1
May 10 23:16:31 luppakorva kernel: pcmcia: registering new device
pcmcia1.0
May 10 23:16:31 luppakorva kernel: IRQ handler type mismatch for IRQ 3
May 10 23:16:31 luppakorva kernel: [<c01401f5>] setup_irq+0x170/0x184
May 10 23:16:31 luppakorva kernel: [<cc9d853c>] test_action+0x0/0x3
[pcmcia]
May 10 23:16:31 luppakorva kernel: [<c0140285>] request_irq+0x7c/0x98
May 10 23:16:31 luppakorva kernel: [<cc9d89b3>]
pcmcia_request_irq+0xe2/0x1d6 [pcmcia]
May 10 23:16:31 luppakorva kernel: [<ccaab9f7>] pcnet_probe+0x314/0xccc
[pcnet_cs]
May 10 23:16:31 luppakorva kernel: [<c01b584e>]
cfq_insert_request+0x31e/0x4cb
May 10 23:16:31 luppakorva kernel: [<c0125824>] del_timer+0x41/0x47
May 10 23:16:31 luppakorva kernel: [<c01ad753>]
generic_make_request+0x190/0x1a0
May 10 23:16:31 luppakorva kernel: [<c01b7420>] __next_cpu+0x12/0x21
May 10 23:16:31 luppakorva kernel: [<c0116d0a>]
find_busiest_group+0x177/0x46a
May 10 23:16:31 luppakorva kernel: [<c01af49f>] submit_bio+0xbf/0xc5
May 10 23:16:31 luppakorva kernel: [<c027fc02>] schedule+0x84e/0x8fe
May 10 23:16:31 luppakorva kernel: [<c0116412>]
__activate_task+0x1c/0x29
May 10 23:16:31 luppakorva kernel: [<c01177be>]
sched_create_sysfs_power_savings_entries+0x1f/0x3d
May 10 23:16:31 luppakorva kernel: [<c011624d>]
__wake_up_common+0x2f/0x53
May 10 23:16:31 luppakorva kernel: [<c011669e>] __wake_up+0x2a/0x3d
May 10 23:16:31 luppakorva kernel: [<cc9d81a6>]
pcmcia_device_probe+0x66/0xf8 [pcmcia]
May 10 23:16:31 luppakorva kernel: [<c0210b48>]
__driver_attach+0x0/0x5d
May 10 23:16:31 luppakorva kernel: [<c0210aa9>]
driver_probe_device+0x42/0x8b
May 10 23:16:31 luppakorva kernel: [<c0210b80>]
__driver_attach+0x38/0x5d
May 10 23:16:31 luppakorva kernel: [<c02105ca>]
bus_for_each_dev+0x33/0x55
May 10 23:16:31 luppakorva kernel: [<c0210a13>] driver_attach+0x11/0x13
May 10 23:16:31 luppakorva kernel: [<c0210b48>]
__driver_attach+0x0/0x5d
May 10 23:16:31 luppakorva kernel: [<c02102e3>]
bus_add_driver+0x64/0xfd
May 10 23:16:31 luppakorva kernel: [<cc9d7df6>]
pcmcia_register_driver+0x4a/0xab [pcmcia]
May 10 23:16:31 luppakorva kernel: [<c01358c1>]
sys_init_module+0x16c3/0x1846
May 10 23:16:31 luppakorva kernel: [<c0102c11>]
sysenter_past_esp+0x56/0x79
May 10 23:16:31 luppakorva kernel: eth0: NE2000 Compatible: io 0x300,
irq 5, hw_addr 00:04:E2:B7:6E:5D
The kernel module difference between single and multiuser mode is:
--- lsmod_single.txt 2007-05-11 08:00:01.000000000 +0300
+++ lsmod_normal.txt 2007-05-11 08:12:22.000000000 +0300
@@ -1,4 +1,12 @@
Module Size Used by
+button 6672 0
+ac 5188 0
+battery 9636 0
+ipt_REJECT 5248 2
+xt_tcpudp 3136 9
+iptable_filter 3104 1
+ip_tables 13028 1 iptable_filter
+x_tables 13316 3 ipt_REJECT,xt_tcpudp,ip_tables
ipv6 226016 8
dm_snapshot 15552 0
dm_mirror 19152 0
@@ -32,7 +40,7 @@
snd_seq_midi 8192 0
snd_seq_midi_event 7008 2 snd_seq_oss,snd_seq_midi
snd_seq 45680 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
-irtty_sir 7808 0
+irtty_sir 7808 2
snd_timer 20996 2 snd_pcm,snd_seq
sir_dev 15492 1 irtty_sir
snd_rawmidi 22560 2 snd_mpu401_uart,snd_seq_midi
@@ -54,7 +62,7 @@
agpgart 29896 1 intel_agp
crc_ccitt 2240 1 irda
pcspkr 3072 0
-evdev 9088 0
+evdev 9088 1
soundcore 9248 1 snd
ext3 119240 3
jbd 52456 1 ext3
2.6.20 from unstable has this bug as well but upstream 2.6.21.1 seems to
work, since I can't reproduce the interrupt messages, hangs or oops
anymore after a few hours of testing:
Linux version 2.6.21.1 (root@silu) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Fri May 11 01:32:14 EEST 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
copy_e820_map() start: 00000000000ea000 size: 0000000000016000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000000bee0000 end: 000000000bfe0000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000bfe0000 size: 000000000000fc00 end: 000000000bfefc00 type: 3
copy_e820_map() start: 000000000bfefc00 size: 0000000000000400 end: 000000000bff0000 type: 4
copy_e820_map() start: 000000000bff0000 size: 0000000000001000 end: 000000000bff1000 type: 2
copy_e820_map() start: 000000000bff1000 size: 000000000000f000 end: 000000000c000000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 00000000fff00000 size: 0000000000100000 end: 0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ea000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000bfe0000 (usable)
BIOS-e820: 000000000bfe0000 - 000000000bfefc00 (ACPI data)
BIOS-e820: 000000000bfefc00 - 000000000bff0000 (ACPI NVS)
BIOS-e820: 000000000bff0000 - 000000000bff1000 (reserved)
BIOS-e820: 000000000bff1000 - 000000000c000000 (usable)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
192MB LOWMEM available.
Entering add_active_range(0, 0, 49152) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 49152
HighMem 49152 -> 49152
early_node_map[1] active PFN ranges
0: 0 -> 49152
On node 0 totalpages: 49152
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 352 pages used for memmap
Normal zone: 44704 pages, LIFO batch:7
HighMem zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F66F0, 0014 (r0 FUJ )
ACPI: RSDT 0BFEB990, 0028 (r1 FUJ BISCAYNE 1090000 FUJ 1000)
ACPI: FACP 0BFEFB8C, 0074 (r1 FUJ BISCAYNE 1090000 FUJ 1000)
ACPI: DSDT 0BFEB9B8, 41D4 (r1 FUJ BISCAYNE 1090000 MSFT 1000007)
ACPI: FACS 0BFEFFC0, 0040
ACPI: PM-Timer IO Port: 0xff08
Allocating PCI resources starting at 10000000 (gap: 0c000000:f3f00000)
Built 1 zonelists. Total pages: 48768
Kernel command line: root=/dev/hda2 ro acpi=force single
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01189000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 448.820 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 187020k/196608k available (1655k kernel code, 8984k reserved, 636k data, 208k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xcc800000 - 0xff7fe000 ( 815 MB)
lowmem : 0xc0000000 - 0xcc000000 ( 192 MB)
.init : 0xc0344000 - 0xc0378000 ( 208 kB)
.data : 0xc029df65 - 0xc033cff4 ( 636 kB)
.text : 0xc0100000 - 0xc029df65 (1655 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 898.57 BogoMIPS (lpj=1797145)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20070126
CPU0: Intel Pentium III (Coppermine) stepping 01
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd9ae, last bus=3
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region ff00-ff3f claimed by PIIX4 ACPI
PCI quirk: region ff80-ff8f claimed by PIIX4 SMB
PIIX4 devres B PIO at fd60-fd67
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11)
ACPI: Power Resource [PFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NET: Registered protocol family 8
NET: Registered protocol family 20
pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:01: ioport range 0xff00-0xff3f has been reserved
pnp: 00:01: ioport range 0xf800-0xf87f has been reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: f4000000-f5ffffff
PREFETCH window: 20000000-200fffff
PCI: Bus 2, cardbus bridge: 0000:00:0f.0
IO window: 00001800-000018ff
IO window: 00001c00-00001cff
PREFETCH window: 10000000-13ffffff
MEM window: 14000000-17ffffff
PCI: Bus 6, cardbus bridge: 0000:00:0f.1
IO window: 00003000-000030ff
IO window: 00003400-000034ff
PREFETCH window: 18000000-1bffffff
MEM window: 1c000000-1fffffff
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
ACPI: PCI Interrupt 0000:00:0f.1[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 98304 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 4397k freed
audit: initializing netlink socket (disabled)
audit(1179083392.148:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Freeing unused kernel memory: 208k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: Transitioning device [FAN] to D3
ACPI: Transitioning device [FAN] to D3
ACPI: Fan [FAN] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
Time: acpi_pm clocksource has been installed.
ACPI: Thermal Zone [TZ1] (43 C)
Clocksource tsc unstable (delta = -213023423 ns)
ACPI: Thermal Zone [TZ2] (44 C)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1420-0x1427, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1428-0x142f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
hda: FUJITSU MHH2064AT, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: UJDA170, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 9, io base 0x00001400
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hda: max request size: 128KiB
hda: 12685680 sectors (6495 MB) w/512KiB Cache, CHS=13424/15/63, UDMA(33)
hda: cache flushes not supported
hda: hda1 hda2 hda3 hda4 < hda5 >
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Yenta: CardBus bridge found at 0000:00:0f.0 [10cf:109a]
Linux agpgart interface v0.102 (c) Dave Jones
Yenta: ISA IRQ mask 0x0cb8, PCI irq 9
Socket status: 30000006
Yenta: CardBus bridge found at 0000:00:0f.1 [10cf:109a]
input: PC Speaker as /class/input/input1
Yenta: ISA IRQ mask 0x0cb8, PCI irq 9
Socket status: 30000410
Real Time Clock Driver v1.12ac
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
irda_init()
NET: Registered protocol family 23
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
pccard: PCMCIA card inserted into slot 1
input: PS/2 Mouse as /class/input/input2
input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
cs: IO port probe 0x100-0x4ff: clean.
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x4ff: clean.
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
pcmcia: registering new device pcmcia1.0
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
es1968: not attempting power management.
eth0: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:04:E2:B7:6E:5D
es1968: clocking to 48000
Linux video capture interface: v2.00
Adding 105832k swap on /dev/hda3. Priority:-1 extents:1 across:105832k
EXT3 FS on hda2, internal journal
fuse init (API version 7.8)
IrCOMM protocol (Dag Brattli)
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
ip_tables: (C) 2000-2006 Netfilter Core Team
ACPI: Battery Slot [CMB1] (battery present)
ACPI: Battery Slot [CMB2] (battery absent)
ACPI: AC Adapter [AC] (on-line)
input: Power Button (FF) as /class/input/input4
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input5
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /class/input/input6
ACPI: Lid Switch [LID]
tsdev (compaq touchscreen emulation) is scheduled for removal.
See Documentation/feature-removal-schedule.txt for details.
tsdev (compaq touchscreen emulation) is scheduled for removal.
See Documentation/feature-removal-schedule.txt for details.
sirdev_get_instance - ttyS3
irtty_open - ttyS3: irda line discipline opened
irlap_change_speed(), setting speed to 9600
pccard: card ejected from slot 1
pccard: PCMCIA card inserted into slot 1
pcmcia: registering new device pcmcia1.0
eth0: NE2000 Compatible: io 0x300, irq 5, hw_addr 00:04:E2:B7:6E:5D
pccard: card ejected from slot 1
pccard: PCMCIA card inserted into slot 1
pcmcia: registering new device pcmcia1.0
eth0: NE2000 Compatible: io 0x300, irq 5, hw_addr 00:04:E2:B7:6E:5D
pccard: card ejected from slot 1
pccard: PCMCIA card inserted into slot 1
pcmcia: registering new device pcmcia1.0
eth0: NE2000 Compatible: io 0x300, irq 5, hw_addr 00:04:E2:B7:6E:5D
Reply to: