Bug#421870: opcode unknown on ide hard disk
Package: linux-source
Version: 2.6.18
One of my disk when I boot the machine show the error (below one more complete dmesg after boot and
hdparam -I of this disk)
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=2122765, sector=2122764
ide: failed opcode was: unknown
hdd: DMA disabled
ide1: reset: success
hdc: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdc: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=2122765, sector=2122765
ide: failed opcode was: unknown
Buffer I/O error on device hdc, logical block 530691
This error only is show in boot time with kernel 2.6.18 and later and in the version 2.6.8
this error is not show.
In pristine kernel 2.6.18 and not in 2.6.8 the time clock and keyboard run very fast this is solved
by the patches of debian etch (I think this would be realationated)
I probe the kernel param hdc=noprobe and hdc=head,cyl,sector and the message error are not show but
after of boot I can not access to the hard disk.
I probe diferent patches and diferent compilation options but error has not been solved
My system is debian etch and the kernel of installation have the same probem and during the installation
system blocked several times by this probem having reboot the system.
dmesg
-------------------------------------------------------------------------------------
Linux version 2.6.18 (Version: custom.1.0) (root@troya) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 Thu Apr 26 21:05:20 CEST 2007
ACPI: RSDP (v000 ASUS ) @ 0x000f81e0
ACPI: RSDT (v001 ASUS P5A-B 0x42302e31 MSFT 0x31313031) @ 0x17ffc000
ACPI: FADT (v001 ASUS P5A-B 0x42302e31 MSFT 0x31313031) @ 0x17ffc080
ACPI: BOOT (v001 ASUS P5A-B 0x42302e31 MSFT 0x31313031) @ 0x17ffc040
ACPI: DSDT (v001 ASUS P5A-B 0x00001000 MSFT 0x01000001) @ 0x00000000
ACPI: PM-Timer IO Port: 0xec08
Detected 501.111 MHz processor.
Kernel command line: root=/dev/hda2 ro
Calibrating delay using timer specific routine.. 1003.07 BogoMIPS (lpj=2006158)
CPU: AMD-K6(tm) 3D processor stepping 0c
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller at PCI slot 0000:00:0f.0
ACPI: Unable to derive IRQ for device 0000:00:0f.0
ACPI: PCI Interrupt 0000:00:0f.0[A]: no GSI
ALI15X3: chipset revision 193
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: ST320423A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: Maxtor 71084 AP, ATA DISK drive
hdd: IDE/ATAPI CD-ROM 44X, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 40011300 sectors (20485 MB) w/512KiB Cache, CHS=39693/16/63, UDMA(33)
hda: cache flushes not supported
hda: hda1 hda2
hdc: max request size: 128KiB
hdc: 2122780 sectors (1086 MB) w/128KiB Cache, CHS=2105/16/63, DMA
hdc: hdc1 hdc2
PM-Timer running at invalid rate: 199% of normal - aborting.
Time: tsc clocksource has been installed.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=2122765, sector=2122764
ide: failed opcode was: unknown
Real Time Clock Driver v1.12ac
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=2122765, sector=2122764
ide: failed opcode was: unknown
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=2122765, sector=2122764
ide: failed opcode was: unknown
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=2122765, sector=2122764
ide: failed opcode was: unknown
hdc: DMA disabled
hdd: DMA disabled
ide1: reset: success
hdc: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdc: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=2122765, sector=2122765
ide: failed opcode was: unknown
hdc: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdc: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=2122765, sector=2122765
ide: failed opcode was: unknown
hdc: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdc: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=2122765, sector=2122765
ide: failed opcode was: unknown
hdc: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdc: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=2122765, sector=2122765
ide: failed opcode was: unknown
ide1: reset: success
hdc: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdc: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=2122765, sector=2122765
ide: failed opcode was: unknown
hdc: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdc: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=2122765, sector=2122765
ide: failed opcode was: unknown
hdc: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdc: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=2122765, sector=2122765
ide: failed opcode was: unknown
hdc: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdc: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=2122765, sector=2122765
ide: failed opcode was: unknown
ide1: reset: success
hdc: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdc: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=2122765, sector=2122765
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 2122765
Buffer I/O error on device hdc, logical block 530691
hdc: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdc: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=2122765, sector=2122765
ide: failed opcode was: unknown
hdd: ATAPI 20X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
hdc: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdc: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=2122765, sector=2122765
ide: failed opcode was: unknown
hdc: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdc: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=2122765, sector=2122765
ide: failed opcode was: unknown
hdc: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdc: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=2122765, sector=2122765
ide: failed opcode was: unknown
ide1: reset: success
hdc: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdc: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=2122765, sector=2122765
ide: failed opcode was: unknown
hdc: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdc: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=2122765, sector=2122765
ide: failed opcode was: unknown
hdc: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdc: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=2122765, sector=2122765
ide: failed opcode was: unknown
hdc: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdc: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=2122765, sector=2122765
ide: failed opcode was: unknown
ide1: reset: success
hdc: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdc: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=2122765, sector=2122765
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 2122765
Buffer I/O error on device hdc, logical block 530691
Adding 64504k swap on /dev/hdc2. Priority:-1 extents:1 across:64504k
EXT3 FS on hda2, internal journal
Time: pit clocksource has been installed.
-------------------------------------------------------------------------------------
hdparm -I /dev/hdc
-------------------------------------------------------------------------------------
/dev/hdc:
ATA device, with non-removable media
Model Number: Maxtor 71084 AP
Serial Number: L804D5TS
Firmware Revision: QA3C1D20
Standards:
Likely used: 2
Configuration:
Logical max current
cylinders 2105 2105
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 2121840
LBA user addressable sectors: 2122780
device size with M = 1024*1024: 1036 MBytes
device size with M = 1000*1000: 1086 MBytes (1 GB)
Capabilities:
LBA, IORDY(can be disabled)
Buffer size: 128.0kB bytes avail on r/w long: 34
Standby timer values: spec'd by Vendor
R/W multiple sector transfer: Max = 32 Current = 0
DMA: sdma0 sdma1 *sdma2 mdma0 mdma1 *mdma2 (?)
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=180ns IORDY flow control=120ns
-------------------------------------------------------------------------------------
Ahora también puedes acceder a tu correo Terra desde el móvil.
Infórmate pinchando aquí.
Reply to: