--- Begin Message ---
Package: kernel-image-2.6.8-10-em64t-p4
Version: 2.6.8-11
The following kernel trap happens on a Dell Precision Workstation 670 using
the kernel compiled for em64t. It happens with both the -smp kernel and the
single CPU kernel and it doesn't seem to depend upen whether or not HT is
turned on or off. After the last line in the kernel boot log below the machine
hangs.
The machine does however run fine using the standard kernel-image-2.6.8-2-386
kernel.
Bootdata ok (command line is root=/dev/sda6 ro console=ttyS0,9600)
Linux version 2.6.8-10-em64t-p4 (rover@lobo) (gcc versión 3.4.4 20041218
(prerelease) (Debian 3.4.3-6)) #1 SMP Sun Jan 30 03:32:06 CET 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cfe8ac00 (usable)
BIOS-e820: 00000000cfe8ac00 - 00000000cfe8cc00 (ACPI NVS)
BIOS-e820: 00000000cfe8cc00 - 00000000cfe8ec00 (ACPI data)
BIOS-e820: 00000000cfe8ec00 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000012c000000 (usable)
No mptable found.
ACPI: RSDP (v000 DELL ) @
0x00000000000fec30
ACPI: RSDT (v001 DELL WS 670 0x00000007 ASL 0x00000061) @
0x00000000000fcb6f
ACPI: FADT (v001 DELL WS 670 0x00000007 ASL 0x00000061) @
0x00000000000fcbc3
ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @
0x00000000fffdad4e
ACPI: MADT (v001 DELL WS 670 0x00000007 ASL 0x00000061) @
0x00000000000fcc37
ACPI: BOOT (v001 DELL WS 670 0x00000007 ASL 0x00000061) @
0x00000000000fccc1
ACPI: ASF! (v016 DELL WS 670 0x00000007 ASL 0x00000061) @
0x00000000000fcce9
ACPI: MCFG (v001 DELL WS 670 0x00000007 ASL 0x00000061) @
0x00000000000fcd50
ACPI: HPET (v001 DELL WS 670 0x00000007 ASL 0x00000061) @
0x00000000000fcd8e
ACPI: SSDT (v001 DpgPmm Cpu0Ist 0x00000011 INTL 0x20030522) @
0x00000000cfe8ac40
ACPI: SSDT (v001 DpgPmm Cpu1Ist 0x00000011 INTL 0x20030522) @
0x00000000cfe8b049
ACPI: SSDT (v001 DpgPmm CpuPm 0x00000010 INTL 0x20030522) @
0x00000000cfe8b452
ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @
0x0000000000000000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: Assigned apic_id 8
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[1]: Assigned apic_id 9
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec80800] gsi_base[48])
IOAPIC[2]: Assigned apic_id 10
IOAPIC[2]: apic_id 10, version 32, address 0xfec80800, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: root=/dev/sda6 ro console=ttyS0,9600
Initializing CPU#0
PID hash table entries: 16 (order 4: 256 bytes)
time.c: Using 14.318180 MHz HPET timer.
time.c: Detected 3591.133 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Memory: 4039120k/4915200k available (1668k kernel code, 87380k reserved, 909k
data, 148k init)
Calibrating delay loop... 7127.04 BogoMIPS
Security Scaffold v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
CPU: Trace cache: 12K uops
using mwait in idle threads.
CPU: Physical Processor ID: 0
Using IO APIC NMI watchdog
CPU: Trace cache: 12K uops
CPU: Physical Processor ID: 0
CPU0: Intel(R) Xeon(TM) CPU 3.60GHz stepping 03
per-CPU timeslice cutoff: 0.00 usecs.
task migration cache decay timeout: 1 msecs.
Booting processor 1/1 rip 6000 rsp 100cfa57f58
Initializing CPU#1
Calibrating delay loop... 7176.19 BogoMIPS
CPU: Trace cache: 12K uops
CPU: Physical Processor ID: 0
Intel(R) Xeon(TM) CPU 3.60GHz stepping 03
Total of 2 processors activated (14303.23 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
activating NMI Watchdog ... done.
testing NMI watchdog ... OK.
Using local APIC timer interrupts.
Detected 12.469 MHz APIC timer.
checking TSC synchronization across 2 CPUs: passed.
time.c: Using HPET based timekeeping.
Brought up 2 CPUs
checking if image is initramfs...it isn't (ungzip failed); looks like an
initrd
NET: Registered protocol family 16
PCI: Using configuration type 1
PCI: Using MMCONFIG at e0000000
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI interrupt 0000:02:0c.0[A] -> GSI 26 (level, low) -> IRQ 26
ACPI: PCI interrupt 0000:02:0c.1[B] -> GSI 27 (level, low) -> IRQ 27
ACPI: PCI interrupt 0000:03:0e.0[A] -> GSI 48 (level, low) -> IRQ 48
ACPI: PCI interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:06:0c.0[A] -> GSI 16 (level, low) -> IRQ 16
testing the IO APIC.......................
.................................... done.
Simple Boot Flag value 0x87 read from CMOS RAM was invalid
Simple Boot Flag at 0x7a set to 0x1
WARNING more than 4GB of memory but no IOMMU.
WARNING 32bit PCI may malfunction.
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 32768 buckets, 512Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S3 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4212 blocks [1 disk] into ram disk...
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 148k freed
initrd-tools: 0.vesafb: probe of vesafb0 failed with error -6
1.77
NET: Registered protocol family 1
SCSI subsystem initialized
ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 18
ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 18
ata1: SATA port has no device.
scsi0 : ata_piix
ata2: SATA port has no device.
scsi1 : ata_piix
Using anticipatory io scheduler
isa bounce pool size: 16 pages
ACPI: PCI interrupt 0000:02:0c.0[A] -> GSI 26 (level, low) -> IRQ 26
ACPI: PCI interrupt 0000:02:0c.1[B] -> GSI 27 (level, low) -> IRQ 27
scsi2 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
<Adaptec 39320A Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512
SCBs
(scsi2:A:0): 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI, 16bit)
Vendor: SEAGATE Model: ST3146707LW Rev: D701
Type: Direct-Access ANSI SCSI revision: 03
scsi2:A:0:0: Tagged Queuing enabled. Depth 32
scsi3 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
<Adaptec 39320A Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512
SCBs
SCSI device sda: 286749480 512-byte hdwr sectors (146816 MB)
SCSI device sda: drive cache: write back
/dev/scsi/host2/bus0/target0/lun0: p1 p2 < p5 p6 >
Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
INIT: version 2.86 booting
Mounting a tmpfs over /dev...done.
Creating initial device nodes...done.
Activating swap.Adding 979924k swap on /dev/sda5. Priority:-1 extents:1
Checking root file system...
fsck 1.35 (28-Feb-2004)
/: clean, 104885EXT3 FS on sda6, internal journal
/1158720 files, 505821/2317368 blocks
System time was Fri Mar 25 20:13:54 UTC 2005.
Setting the System Clock using the Hardware Clock as reference...
System Clock set. System local time is now Fri Mar 25 15:13:56 EST 2005.
Cleaning up ifupdown...done.
Calculating module dependencies... done.
Loading modules...
ide-cd
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide-disk
ide-generic
hdc: Lite-On LTN486S 48x Max, ATAPI CD/DVD-ROM drive
hdd: TSST CD-RW/DVD-ROM TSH492B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: ATAPI 48X CD-ROM drive, 120kB Cache
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X DVD-ROM CD-R/RW drive, 2048kB Cache
psmouse
input: PS/2 Generic Mouse on isa0060/serio1
sbp2
sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
sd_mod
sr_mod
All modules loaded.
Checking all fits: Compaq touchscreen protocol output
le systems...
fsck 1.35 (28-Feb-2004)
Setting kernel variables ...
... done.
Mounting local filesystems...
mice: PS/2 mouse device common for all mice
Detecting hardware: i810_tco ohci1394 e1000 piix ata_piix aic79xx i810_audio
usb_uhci ehci_hcd
Skipping unavailable/built-in i810_tohci1394: $Rev: 1223 $ Ben Collins
<bcollins@debian.org>
co module.
LoadACPI: PCI interrupt 0000:06:0c.0[A] -> GSI 16 (level, low) -> IRQ 16
ing ohci1394 module.
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[df8fb800-df8fbfff]
Max Packet=[2048]
Loading e1000 module.
e1000: Ignoring new-style parameters in presence of obsolete ones
Intel(R) PRO/1000 Network Driver - version 5.2.52-k4
Copyright (c) 1999-2004 Intel Corporation.
ACPI: PCI interrupt 0000:03:0e.0[A] -> GSI 48 (level, low) -> IRQ 48
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Loading piix module.
ICH5: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ICH5: port 0x0170 already claimed by ide1
ICH5: neither IDE port enabled (BIOS)
Skipping already loaded module ata_piix.
Skipping already loaded module aic79xx.
Loading i810_audio module.
Intel 810 + AC97 Audio, version 1.01, 03:44:54 Jan 30 2005
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
i810: Intel ICH5 found at IO 0xe8c0 and 0xec00, ME<6M >0ixp1d3f9f4f:f a$0R0e
av:nd 1202x4df $ff fBe90n 0,Co IlRlQi ns17
<bcollins@debian.org>
ip1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
----------- [cut here ] --------- [please bite here ] ---------
Kernel BUG at traps:310
invalid operand: 0000 [1] SMP
CPU 1
Modules linked in: eth1394 i810_audio ac97_codec soundcore piix e1000
ohci1394 mousedev evdev tsdev sbp2 ieee1394 psmouse ide_generic ide_disk
ide_cd ide_core ext2 ext3 jbd mbcache sr_mod cdrom sd_mod aic79xx ata_piix
libata scsi_mod unix font vesafb cfbcopyarea cfbimgblt cfbfillrect
Pid: 1529, comm: modprobe Not tainted 2.6.8-10-em64t-p4
RIP: 0010:[<ffffffff80111cf0>] <ffffffff80111cf0>{out_of_line_bug+0}
RSP: 0000:000001012a129dc0 EFLAGS: 00010206
RAX: ffffffff00000000 RBX: 000000012a1a8000 RCX: 000001012b818000
RDX: 000000012a1a9000 RSI: ffffff0010128000 RDI: 000001012b818000
RBP: ffffff0010128000 R08: 000001000514bcb8 R09: 0000000000000000
R10: ffffff0010128000 R11: 0000000000000200 R12: 0000000000000010
R13: 0000000000000000 R14: 0000000000001000 R15: 0000000000000002
FS: 0000000000000000(0000) GS:ffffffff803de200(005b) knlGS:00000000556ae2a0
CS: 0010 DS: 002b ES: 002b CR0: 000000008005003b
CR2: 00000000ffffd050 CR3: 0000000005e2a000 CR4: 00000000000006e0
Process modprobe (pid: 1529, threadinfo 000001012a128000, task
000001012a78ef60)
Stack: ffffffff8011eaa2 0000000000000246 0000001000000163 000001012b818000
00000000000001e0 000001012bcc9e48 ffffff0010128000 0000000000000010
000001012b818000 0000000000000002
Call Trace:<ffffffff8011eaa2>{pci_map_sg+162}
<ffffffffa0137def>{:ieee1394:dma_region_alloc+255}
<ffffffffa013836e>{:ieee1394:hpsb_iso_common_init+446}
<ffffffffa0138498>{:ieee1394:hpsb_iso_recv_init+40}
<ffffffffa01e3ef0>{:eth1394:ether1394_iso+0}
<ffffffffa01e2a7c>{:eth1394:ether1394_add_host+700}
<ffffffffa01e3ef0>{:eth1394:ether1394_iso+0}
<ffffffffa0132e70>{:ieee1394:highlevel_for_each_host_reg+0}
<ffffffffa0132e87>{:ieee1394:highlevel_for_each_host_reg+23}
<ffffffffa0137746>{:ieee1394:nodemgr_for_each_host+86}
<ffffffffa01e9032>{:eth1394:ether1394_init_module+50}
<ffffffff8014de09>{sys_init_module+281}
<ffffffff80121091>{ia32_sysret+0}
Code: 0f 0b 17 3e 2b 80 ff ff ff ff 36 01 c3 66 66 90 8b 35 be e9
RIP <ffffffff80111cf0>{out_of_line_bug+0} RSP <000001012a129dc0>
<6>i810: Intel ICH5 mmio at 0xffffff001012aa00 and 0xffffff001012c900
i810_audio: Primary codec has ID 0
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
i810_audio: Connection 0 with codec id 0
ac97_codec: AC97 Audio codec, id: ADS116 (Unknown)
i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
Loading uhci_hcd module.
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 16, io base 000000000000ff80
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 19, io base 000000000000ff60
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 18, io base 000000000000ff40
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: irq 16, io base 000000000000ff20
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Loading ehci_hcd module.
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI
Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 23, pci mem ffffff001012e800
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
Running 0dns-down to make sure resolv.conf is ok...done.
Setting up networking...done.
Starting hotplug subsystem:
pci
usb 4-1: new low speed USB device using address 2
----------- [cut here ] --------- [please bite here ] ---------
Kernel BUG at traps:310
invalid operand: 0000 [2] SMP
CPU 1
Modules linked in: ehci_hcd uhci_hcd eth1394 i810_audio ac97_codec soundcore
piix e1000 ohci1394 mousedev evdev tsdev sbp2 ieee1394 psmouse ide_generic
ide_disk ide_cd ide_core ext2 ext3 jbd mbcache sr_mod cdrom sd_mod aic79xx
ata_piix libata scsi_mod unix font vesafb cfbcopyarea cfbimgblt cfbfillrect
Pid: 43, comm: khubd Not tainted 2.6.8-10-em64t-p4
RIP: 0010:[<ffffffff80111cf0>] <ffffffff80111cf0>{out_of_line_bug+0}
RSP: 0000:000001012b8b1b50 EFLAGS: 00010206
RAX: ffffffff00000000 RBX: 000000012b95a440 RCX: 000001012b810800
RDX: 000000012b95a462 RSI: 0000000000000010 RDI: 000001012a6d08c0
RBP: 000001012a6d08c0 R08: 00000000ffffffa6 R09: 000001012b879800
R10: 0000000000000000 R11: ffffffff80224050 R12: 000001012b810800
R13: 000001012b87a800 R14: 0000000000000010 R15: 0000000000000022
FS: 0000000000000000(0000) GS:ffffffff803de200(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 00000000556e6d9c CR3: 0000000005e2a000 CR4: 00000000000006e0
Process khubd (pid: 43, threadinfo 000001012b8b0000, task 000001012bd020f0)
Stack: ffffffff80224775 000000002b8b1b78 000001012b8b1c58 000001012b8b1bc8
0000000000000246 000001012b8b1bd8 0000000000001388 000001012b8b1cbc
0000000000001388 000001012b8b1c18
Call Trace:<ffffffff80224775>{hcd_submit_urb+1829}
<ffffffff8029d79a>{wait_for_completion+154}
<ffffffff80131490>{default_wake_function+0}
<ffffffff802254df>{usb_start_wait_urb+111}
<ffffffff802253f0>{timeout_kill+0}
<ffffffff80225619>{usb_internal_control_msg+137}
<ffffffff802256e3>{usb_control_msg+147}
<ffffffff80225f77>{usb_get_descriptor+135}
<ffffffff80227ed9>{usb_get_configuration+665}
<ffffffff802217e0>{usb_new_device+32}
<ffffffff80222ee6>{hub_thread+2246}
<ffffffff80133390>{autoremove_wake_function+0}
<ffffffff80133390>{autoremove_wake_function+0}
<ffffffff8011119f>{child_rip+8}
<ffffffff801bd690>{dummy_d_instantiate+0}
<ffffffff80222620>{hub_thread+0}
<ffffffff80111197>{child_rip+0}
Code: 0f 0b 17 3e 2b 80 ff ff ff ff 36 01 c3 66 66 90 8b 35 be e9
RIP <ffffffff80111cf0>{out_of_line_bug+0} RSP <000001012b8b1b50>
uhci-hcd: already loaded
uhci-hcd: already loaded
uhci-hcd: already loaded
uhci-hcd: already loaded
ehci-hcd: already loaded
<6>hw_random hardware driver 1.0.0 loaded
hw_random: loaded successfully
i8xx_tco: blacklisted
piix: already loaded
ata_piix: already loaded
snd-intel8x0: loaded successfully
i810_audio: already loaded
aic7xxx: loaded successfully
aic79xx: already loaded
aic7xxx: already loaded
aic79xx: already loaded
e1000: already loaded
ignoring pci display device on 05:00.0
ignoring pci display device on 05:00.1
ohci1394: already loaded
pci [success]
usb
--- End Message ---