Package: linux-image-2.6.16-1-powerpc Version: 2.6.16-2 When I run "modprobe snd-powermac" on my iBook, the kernel generates an oops: > Unable to handle kernel paging request for data at address 0x00000002 > Faulting instruction address: 0xc01a2d7c > Oops: Kernel access of bad area, sig: 11 [#1] > Modules linked in: snd_powermac snd_pcm snd_timer snd soundcore snd_page_alloc binfmt_misc ipv6 sr_mod sbp2 scsi_mod apm_emu eth1394 tsdev airport ide_cd orinoco ohci_hcd cdrom ohci1394 ieee1394 uninorth_agp hermes usbcore agpgart sungem sungem_phy ext3 jbd mbcache ide_disk evdev > NIP: C01A2D7C LR: E59743F4 CTR: C01A2D50 > REGS: dc887cc0 TRAP: 0300 Not tainted (2.6.16-1-powerpc) > MSR: 00009032 <EE,ME,IR,DR> CR: 22008444 XER: 20000000 > DAR: 00000002, DSISR: 40000000 > TASK = cfd0c050[2570] 'modprobe' THREAD: dc886000 > GPR00: E59743F4 DC887D70 CFD0C050 00000000 00000001 00000068 00000000 00000001 > GPR08: 00000002 00000000 C0018BCC C01A2D50 00000000 1001E638 00000000 00000000 > GPR16: 00000000 00000000 100013D0 00000000 3002A000 00000003 00000000 00000000 > GPR24: 100170A8 00000000 10017224 DCC1E600 DFD27740 0000000A E597D4F8 E5977578 > NIP [C01A2D7C] i2c_smbus_write_byte_data+0x2c/0x50 > LR [E59743F4] send_init_client+0x30/0x90 [snd_powermac] > Call Trace: > [DC887D70] [C0053AA0] setup_irq+0x12c/0x148 (unreliable) > [DC887DB0] [E59743F4] send_init_client+0x30/0x90 [snd_powermac] > [DC887DD0] [E5907F00] snd_pmac_tumbler_post_init+0x30/0x68 [snd_powermac] > [DC887DE0] [E5906228] snd_pmac_probe+0x1a8/0x324 [snd_powermac] > [DC887E10] [C017D46C] platform_drv_probe+0x20/0x30 > [DC887E20] [C017B460] driver_probe_device+0x98/0x100 > [DC887E40] [C017A8FC] bus_for_each_drv+0x50/0x98 > [DC887E70] [C017B538] device_attach+0x6c/0xa8 > [DC887E90] [C017A97C] bus_add_device+0x38/0xf4 > [DC887EB0] [C0179690] device_add+0xe0/0x174 > [DC887ED0] [C017D2B8] platform_device_add+0x118/0x160 > [DC887EF0] [C017D844] platform_device_register_simple+0x4c/0x78 > [DC887F10] [E5906044] alsa_card_pmac_init+0x44/0x80 [snd_powermac] > [DC887F20] [C004B910] sys_init_module+0x15c/0x2c0 > [DC887F40] [C000FF44] ret_from_syscall+0x0/0x40 > --- Exception: c01 at 0xff6e6a8 > LR = 0x10003e30 > Instruction dump: > 4e800020 7c0802a6 9421ffc0 7c691b78 7c872378 38c00000 39000002 98a10008 > 90010044 60000000 60000000 60000000 <a0a30002> a0890004 39210008 80630008 > -- Matt
Attachment:
signature.asc
Description: Digital signature