Bug#280112: Certain IDE drivers need the help of ide-generic to recognize CD-ROMs
Hi,
On Mon, Nov 15, 2004 at 03:32:00PM +0900, Horms wrote:
>
> Hi Raoul,
>
> > I can reproduce the ide-generic-problem on two of our machines with
> > 2.6.8:
> >
> > 1.) Dual Pentium III-Server
> >
> > - server-works chipset "IDE interface: ServerWorks OSB4 IDE Controller"
> > - kernel-image-2.6.8-1-686-smp 2.6.8-2 (newer one does not boot because
> > of Bug#275302)
>
> Bug#275302 should be resolved in kernel-source-2.6.8 2.6.8-8 /
> kernel-image-2.6.8-1-* 2.6.8-5.
>
> > - SCSI-root-disk and one single IDE-DVDROM as hda.
> >
> > 2.) Pentium 4 Workstation
> >
> > - Intel chipset "Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100
> > Storage Controller (rev 02)"
> > - kernel-image-2.6.8-1-686-smp 2.6.8-4
> > - root-disk: SATA and one single IDE-DVDRAM as hda.
> >
> > 'piix.ko' seems to have the same problem as 'serverworks.ko'.
> >
> > Both machines are no production machines at the moment and I'd be happy
> > to help with testing.
>
> There was a fix to the piix driver that should have resolved this in
> kernel-source-2.6.8 2.6.8-8 / kernel-image-2.6.8-1-* 2.6.8-5.
> Are you able to test that? It _should_ work on both the systems above.
> Reports to the contrary are welcome.
Sorry, but no improvement on the SATA-System. 'serverworks' gets loaded
but not 'ide-generic'. So still no ide-devices present. Can't say anything
about the 'piix'-system because it does not boot (Bug#275302 still present?)
I'm willing to compile and test if you send me patches, but not this week.
Regards
Raoul
Serial console output from our server-system:
Linux version 2.6.8-1-686-smp (dilinger@toaster.hq.voxel.net) (gcc version 3.3.5 (Debian 1:3.3.5-2)) #1 SMP Thu Nov 11 11:49:00 EST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4400 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003ffffc00 (ACPI data)
BIOS-e820: 000000003ffffc00 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f6900
DMI 2.3 present.
ACPI: RSDP (v000 INTEL ) @ 0x000f6910
ACPI: RSDT (v001 INTEL 024B 0x00000001 PTL 0x00000000) @ 0x3fffa25c
ACPI: FADT (v001 INTEL 024B 0x00000001 PTL 0x00000000) @ 0x3ffffafa
ACPI: MADT (v001 INTEL 024B 0x00000001 PTL 0x00000000) @ 0x3ffffb6e
ACPI: BOOT (v001 INTEL 024B 0x00000001 PTL 0x00000000) @ 0x3ffffbd8
ACPI: DSDT (v001 INTEL 024B 0x00000001 MSFT 0x0100000a) @ 0x00000000
ACPI: PM-Timer IO Port: 0x404
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 17
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
Processor #3 6:8 APIC version 17
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: Assigned apic_id 4
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-15
ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[16])
IOAPIC[1]: Assigned apic_id 5
IOAPIC[1]: apic_id 5, version 17, address 0xfec01000, GSI 16-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 31 low level)
Enabling APIC mode: Flat. Using 2 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=Linux ro root=900 console=ttyS1,57600 devfs=mount
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 1000.051 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1030604k/1048512k available (1655k kernel code, 17004k reserved, 769k data, 168k init, 131008k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1966.08 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel Pentium III (Coppermine) stepping 0a
per-CPU timeslice cutoff: 731.00 usecs.
task migration cache decay timeout: 1 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/0 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1994.75 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium III (Coppermine) stepping 0a
Total of 2 processors activated (3960.83 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=0 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 999.0632 MHz.
..... host bus clock speed is 133.0284 MHz.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 4760k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdb57, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Interrupt Link [IR1] (IRQs 5 10) *9
ACPI: PCI Interrupt Link [LN0E] (IRQs *14)
ACPI: PCI Interrupt Link [LN10] (IRQs *16)ACPI: PCI Interrupt Link [LN11] (IRQs *17)
ACPI: PCI Interrupt Link [LN12] (IRQs *18)
ACPI: PCI Interrupt Link [LN13] (IRQs *19)
ACPI: PCI Interrupt Link [LN14] (IRQs *20)
ACPI: PCI Interrupt Link [LN15] (IRQs *21)
ACPI: PCI Interrupt Link [LN16] (IRQs *22)
ACPI: PCI Interrupt Link [LN17] (IRQs *23)
ACPI: PCI Interrupt Link [LN18] (IRQs *24)
ACPI: PCI Interrupt Link [LN19] (IRQs *25)
ACPI: PCI Interrupt Link [LN1A] (IRQs *26)
ACPI: PCI Interrupt Link [LN1B] (IRQs *27)
ACPI: PCI Interrupt Link [LN1C] (IRQs *28)
ACPI: PCI Interrupt Link [LN1D] (IRQs *29)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Embedded Controller [EC0] (gpe 4)
ACPI: PCI Root Bridge [PCI1] (00:01)
PCI: Probing PCI hardware (bus 01)
ACPI: Power Resource [FN10] (off)
ACPI: Power Resource [FN11] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f69c0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xa934, dseg 0x400
pnp: 00:00: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:00: ioport range 0xcd6-0xcd7 has been reserved
pnp: 00:00: ioport range 0xfe00-0xfe3f has been reserved
pnp: 00:00: ioport range 0x580-0x58f has been reserved
PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 19 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 18 (level, low) -> IRQ 193
ACPI: PCI Interrupt Link [IR1] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:0f.2[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:01:04.0[A] -> GSI 16 (level, low) -> IRQ 201
ACPI: PCI interrupt 0000:01:04.1[B] -> GSI 17 (level, low) -> IRQ 209
testing the IO APIC.......................
Using vector-based indexing
.................................... done.
Simple Boot Flag at 0x7d set to 0x1
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4760 blocks [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Mounted devfs on /dev
Freeing unused kernel memory: 168k freed
initrd-tools: 0.1.74
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: raid1 personality registered as nr 3
SCSI subsystem initialized
md: md0 stopped.
mdadm: cannot open device /dev/scsi/host0/bus0/target0/lun0/part1: No such file or directory
mdadm: /dev/scsi/host0/bus0/target0/lun0/part1 has wrong uuid.
mdadm: cannot open device /dev/scsi/host0/bus0/target1/lun0/part1: No such file or directory
mdadm: /dev/scsi/host0/bus0/target1/lun0/part1 has wEXT3-fs: unable to read superblock
rong uuid.
mdadcramfs: wrong magic
m: no devices found for /devfs/md/0
EXT3-fs: unable to read superblock
cramfs: wrong magic
mount: mount poiKernel panic: Attempted to kill init!
nt dev does not exist
pivot_roo
Reply to: