2.6.8 kernel panic under k7 (but not 386)
Hi All,
I posted this to debian-user but got no replies. If this is because I
have missed out some crucial information, please say!
----
I have installed sarge onto a new AMD XP2500 system. By default, it
installed the 2.6.8-1-386 kernel which works fine. I decided to upgrade
to 2.6.8-1-k7 using the kernel-image package. That worked ok (apt-get;
grub-install) until I rebooted. Then I get the kernel panic shown at the
end.
I get the same result with 2.6.7-1-k7 and 2.6.8-1-686, but it works fine
with -386!.
Is it something dumb I am doing, or is there some difference (besides
CPU) between the -386 and -k7 kernel builds that I should be aware of?
I know I can recompile my own kernel, but using the standard packages
makes maintenance easier IMO and thats what I'd prefer to do.
kernel error (2.6.8-1.k7), lspci, and dmesg (2.6.8-1-386) outputs are
below.
Thanks for your help
Rob :)
-------------------------------------------------------------
Linux version 2.6.8-1-k7 (dilinger@toaster.hq.voxel.net) (gcc version
3.3.4 (Debian 1:3.3.4-13)) #1 Thu Oct 7 02:47:47 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable)
BIOS-e820: 000000003f7d0000 - 000000003f7df000 (ACPI data)
BIOS-e820: 000000003f7df000 - 000000003f800000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
119MB HIGHMEM available.
896MB LOWMEM available.
DMI 2.3 present.
ACPI: RSDP (v000 ACPIAM ) @ 0x000f9780
ACPI: Unable to map RSDT
Built 1 zonelists
Kernel command line: root=/dev/hda1 console=ttyS0 console=tty0
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 1825.684 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1023012k/1040192k available (1527k kernel code, 16264k reserved,
694k data, 148k init, 122688k highmem)
Checking if this processor honours the WP bit even in supervisor mode...
Ok.
Calibrating delay loop... 3604.48 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 2500+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1824.0904 MHz.
..... host bus clock speed is 331.0800 MHz.
checking if image is initramfs...it isn't (ungzip failed); looks like an
initrd
spurious 8259A interrupt: IRQ7.
Freeing initrd memory: 4596k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f4300
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x4f6a, dseg 0xf0000
pnp: 00:09: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:09: ioport range 0xcf8-0xcff could not be reserved
pnp: 00:09: ioport range 0x480-0x4ff could not be reserved
PnPBIOS: 13 nodes reported by PnP BIOS; 13 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [10de/0060] at 0000:00:01.0
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Unable to handle kernel paging request at virtual address ffffffff
printing eip:
ffffffff
*pde = 00002067
*pte = 00000000
Oops: 0000 [#1]
PREEMPT
Modules linked in:
CPU: 0
EIP: 0060:[<ffffffff>] Not tainted
EFLAGS: 00010286 (2.6.8-1-k7)
EIP is at 0xffffffff
eax: ffffffff ebx: f880001c ecx: c0371120 edx: 00000000
esi: c0371120 edi: 00000000 ebp: 00000000 esp: f7b03f58
ds: 007b es: 007b ss: 0068
Process swapper (pid: 1, threadinfo=f7b02000 task=f7b01670)
Stack: c01a69ee 00000000 00000000 00000000 f880001c c0371120 c01a6a5e
f880001c
c0371120 00000000 f880005c c01a8551 c0371120 00000000 00008000
c034f5c0
00000001 c01a85e7 c0371120 0000000f c029137e 00000030 c01936cd
c0371120
Call Trace:
[<c01a69ee>] zlib_inflate_blocks_reset+0x6e/0x90
[<c01a6a5e>] zlib_inflate_blocks_new+0x4e/0x60
[<c01a8551>] zlib_inflateInit2_+0xa1/0xf0
[<c01a85e7>] zlib_inflateInit_+0x27/0x30
[<c01936cd>] cramfs_uncompress_init+0x5d/0x70
[<c033f878>] init_cramfs_fs+0x8/0x20
[<c032e81c>] do_initcalls+0x2c/0xc0
[<c012b477>] init_workqueues+0x17/0x60
[<c0100410>] init+0x0/0x150
[<c010044a>] init+0x3a/0x150
[<c010428c>] kernel_thread_helper+0x0/0x14
[<c0104291>] kernel_thread_helper+0x5/0x14
Code: Bad EIP value.
<0>Kernel panic: Attempted to kill init!
-------------------------------------------------------------
0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different
version?) (rev a2)
0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1
(rev a2)
0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4
(rev a2)
0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3
(rev a2)
0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2
(rev a2)
0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5
(rev a2)
0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller
(rev a4)
0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller
(rev a4)
0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller
(rev a4)
0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet
Controller (rev a1)
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce2
AC97 Audio Controler (MCP) (rev a1)
0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge
(rev a3)
0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev a2)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV18
[GeForce4 MX - nForce GPU] (rev a3)
-------------------------------------------------------------
Linux version 2.6.8-1-386 (dilinger@toaster.hq.voxel.net) (gcc version
3.3.4 (Debian 1:3.3.4-11)) #1 Mon Sep 13 23:29:55 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable)
BIOS-e820: 000000003f7d0000 - 000000003f7df000 (ACPI data)
BIOS-e820: 000000003f7df000 - 000000003f800000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available.
On node 0 totalpages: 229376
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 ACPIAM ) @ 0x000f9780
ACPI: Unable to map RSDT
Built 1 zonelists
Kernel command line: root=/dev/hda1 ro
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 1825.034 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 901828k/917504k available (1329k kernel code, 14892k reserved,
727k data, 204k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode...
Ok.
Calibrating delay loop... 3604.48 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
CPU: AMD Athlon(tm) XP 2500+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
ACPI-0367: *** Error: Could not map memory for table [ÿÿÿÿ] at
000000003F7D0000 for length FFFFFFFF
ACPI-0092: *** Error: Could not get ACPI table (size FFFFFFFF),
AE_NO_MEMORY
ACPI-0104: *** Error: acpi_load_tables: Could not load RSDT:
AE_NO_MEMORY
ACPI-0134: *** Error: acpi_load_tables: Could not load tables:
AE_NO_MEMORY
ACPI: Unable to load the System Description Tables
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1824.0884 MHz.
..... host bus clock speed is 331.0797 MHz.
checking if image is initramfs...it isn't (ungzip failed); looks like an
initrd
Freeing initrd memory: 4316k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f4300
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x4f6a, dseg 0xf0000
pnp: 00:09: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:09: ioport range 0xcf8-0xcff could not be reserved
pnp: 00:09: ioport range 0x480-0x4ff could not be reserved
PnPBIOS: 13 nodes reported by PnP BIOS; 13 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [10de/0060] at 0000:00:01.0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
spurious 8259A interrupt: IRQ7.
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4316 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 204k freed
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
hda: ST380011A, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63,
UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2658716k swap on /dev/hda5. Priority:-1 extents:1
EXT3 FS on hda1, internal journal
Real Time Clock Driver v1.12
Capability LSM initialized
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.28.
PCI: Setting latency timer of device 0000:00:04.0 to 64
eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
Intel 810 + AC97 Audio, version 1.01, 23:45:25 Sep 13 2004
PCI: Setting latency timer of device 0000:00:06.0 to 64
i810: NVIDIA nForce Audio found at IO 0xec00 and 0xe800, MEM 0x0000 and
0x0000, IRQ 10
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97 Audio codec, id: ALG32 (ALC650)
i810_audio: AC'97 codec 0, new EID value = 0x05c7
i810_audio: AC'97 codec 0, DAC map configured, total channels = 6
i810_audio: setting clocking to 48648
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 5, pci mem f8875000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
input: PC Speaker
inserting floppy driver for 2.6.8-1-386
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: Maximum main memory to use for agp memory: 816M
agpgart: AGP aperture is 64M @ 0xf4000000
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 5, pci mem f89fb000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2)
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 7, pci mem f8a2a000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02c95a0(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
Reply to: