[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Phonon and pulseaudio



On Thursday 23 February 2012 20:54:16 Frédéric Burlet wrote:
> On Wednesday, February 22, 2012 10:43:14 PM Seb wrote:
> > On Wed, 22 Feb 2012 22:08:25 +0100,
> > 
> > Frédéric Burlet <fred@namurlug.org> wrote:
> > >> > Amarok and the notification system do not play any sound.
> > >> > 
> > >> > If I use paplay (from pulseaudio), I do have sound. So, I guess the
> > >> 
> > >> issue > is a "communication problem" between phonon and pulseaudio.
> > >> 
> > >> > Before this upgrade, everything worked fine.
> > >> 
> > >> Which backends are listed when you open the "Backend" tab in System
> > >> Settings > Multimedia > Phonon? Which output devices are listed on
> > >> the "Device Preference" tab? Do you hear any sound when you select
> > >> one of the devices and press the "Test" button on the bottom right
> > >> hand side?
> > >> 
> > >> Also post the output of:
> > >> 
> > >> lspci -knn | grep -iA2 audio cat /proc/asound/cards
> > > 
> > > Hi Florian,
> > > 
> > > I'm using vlc backend.
> > 
> > I think the vlc backend is currently broken, at least in my sid system.
> > I was also using it until I noticed that simply going to System Settings
> > -> Multimedia -> Phonon crashed System Settings.  I had to use the
> > Gstreamer backend by editing ~/.kde/share/config/servicetype_profilerc.
> > New vlc packages are on their way which will hopefully fix this.  AFAIK,
> > Amarok can only use the Xine backend to play *.mp3, but the
> > phonon-backend-xine is not currently installable:
> > 
> > The following packages have unmet dependencies:
> >   phonon: Conflicts: phonon-backend-xine but 4:4.6.0really4.4.2-1 is to
> >   be installed.
> >   phonon-backend-xine: Depends: libphonon4 (= 4:4.6.0really4.4.2-1) but
> >   4:4.6.0.0-1 is installed.
> 
> I did a few extra tests.
> 
> I created a new user and started a new session and I got sound!
> Nevertheless, once I play with the options in System Settings -> Multimedia
> -> Phonon -> Audio Hardware Setup... I don't have sound anymore.
> (still playing with vlc backend)
> 
> I don't know how to more investigate in order to locate the issue.

[Should cut the above but do not know where]

I got rid of pulse a long time ago.

Run 3.2 kernel, no sound from  browsers, etc. Something like Timidity and 
usually vlc will play.

Run the 3.1 kernel, it all plays.

Might be the problem.


Reply to: