[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Visor does't sync

Hi there,
some weeks ago my Handspring Visor stopped syncing with KPilot. I assume it happend, when I switched to newer udev which kicked out hotplug from my Debian testing. I hoped the next update would fix it, but it didn't up to today.
Whenever I press the hotsync-button Kpilot shows 30% of hotsync-completion and the Visor will show a message like "The connection between your handheld computer and the desktop was lost. Some of your data was NOT backed up ...". Non of the conduits are being run.
From syslog I can see, that visor is being disconnected right after connection is successfully processed. But I can't figure why? 

I use
- kdepim/kpilot 4:3.5.5.dfsg.1-1
- udev 0.100-2.3
- hotplug not installed

The syslog with udev_log="debug" is attached. Also kpilot-log.


Any ideas?

Marc


Nov 26 17:30:13 localhost kernel: hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0002
Nov 26 17:30:13 localhost kernel: ehci_hcd 0000:00:02.2: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
Nov 26 17:30:13 localhost kernel: hub 3-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
Nov 26 17:30:13 localhost kernel: hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
Nov 26 17:30:13 localhost kernel: ehci_hcd 0000:00:02.2: port 1 full speed --> companion
Nov 26 17:30:13 localhost kernel: ehci_hcd 0000:00:02.2: GetStatus port 1 status 003001 POWER OWNER sig=se0 CONNECT
Nov 26 17:30:13 localhost kernel: hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0002
Nov 26 17:30:13 localhost kernel: ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
Nov 26 17:30:13 localhost kernel: hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
Nov 26 17:30:13 localhost kernel: hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
Nov 26 17:30:13 localhost kernel: ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
Nov 26 17:30:13 localhost kernel: usb 1-1: new full speed USB device using ohci_hcd and address 5
Nov 26 17:30:13 localhost kernel: ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
Nov 26 17:30:13 localhost kernel: usb 1-1: ep0 maxpacket = 16
Nov 26 17:30:13 localhost kernel: usb 1-1: default language 0x0409
Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1734 forked, pid [5594], 'add' 'usb', 0 seconds old
Nov 26 17:30:13 localhost kernel: usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
Nov 26 17:30:13 localhost kernel: usb 1-1: Product: Handspring Visor
Nov 26 17:30:13 localhost kernel: usb 1-1: Manufacturer: Handspring Inc
Nov 26 17:30:13 localhost kernel: usb 1-1: uevent
Nov 26 17:30:13 localhost kernel: usb 1-1: configuration #1 chosen from 1 choice
Nov 26 17:30:13 localhost udevd-event[5594]: wait_for_sysfs: file '/sys/devices/pci0000:00/0000:00:02.0/usb1/1-1/bus' appeared after 0 loops
Nov 26 17:30:13 localhost udevd-event[5594]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:13 localhost kernel: usb 1-1: adding 1-1:1.0 (config #1, interface 0)
Nov 26 17:30:13 localhost kernel: usb 1-1:1.0: uevent
Nov 26 17:30:13 localhost kernel: drivers/usb/core/inode.c: creating file '005'
Nov 26 17:30:13 localhost kernel: hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0002
Nov 26 17:30:13 localhost udevd-event[5594]: pass_env_to_socket: passed 202 bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:13 localhost udevd-event[5594]: udev_event_run: seq 1734 finished
Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1734, pid [5594] exit with 0, 0 seconds old
Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1735 forked, pid [5595], 'add' 'usb', 0 seconds old
Nov 26 17:30:13 localhost udevd-event[5595]: wait_for_sysfs: file '/sys/devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/bus' appeared after 0 loops
Nov 26 17:30:13 localhost udevd-event[5595]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:13 localhost udevd-event[5595]: run_program: '/sbin/modprobe usb:v082Dp0100d0100dc00dsc00dp00icFFisc00ip00'
Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1737 forked, pid [5597], 'add' 'module', 0 seconds old
Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1738 forked, pid [5598], 'add' 'drivers', 0 seconds old
Nov 26 17:30:13 localhost kernel: usbcore: registered new driver usbserial
Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1739 forked, pid [5599], 'add' 'drivers', 0 seconds old
Nov 26 17:30:13 localhost kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1740 forked, pid [5600], 'add' 'drivers', 0 seconds old
Nov 26 17:30:13 localhost kernel: usbserial_generic 1-1:1.0: usb_probe_interface
Nov 26 17:30:13 localhost kernel: usbserial_generic 1-1:1.0: usb_probe_interface - got id
Nov 26 17:30:13 localhost kernel: usbcore: registered new driver usbserial_generic
Nov 26 17:30:13 localhost kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core
Nov 26 17:30:13 localhost udevd-event[5597]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:13 localhost udevd-event[5597]: pass_env_to_socket: passed 113 bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:13 localhost udevd-event[5597]: udev_event_run: seq 1737 finished
Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1737, pid [5597] exit with 0, 0 seconds old
Nov 26 17:30:13 localhost udevd-event[5598]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:13 localhost udevd-event[5598]: pass_env_to_socket: passed 132 bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:13 localhost udevd-event[5598]: udev_event_run: seq 1738 finished
Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1738, pid [5598] exit with 0, 0 seconds old
Nov 26 17:30:13 localhost udevd-event[5599]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:13 localhost udevd-event[5599]: pass_env_to_socket: passed 142 bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:13 localhost udevd-event[5599]: udev_event_run: seq 1739 finished
Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1739, pid [5599] exit with 0, 0 seconds old
Nov 26 17:30:13 localhost udevd-event[5600]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:13 localhost udevd-event[5600]: pass_env_to_socket: passed 148 bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:13 localhost udevd-event[5600]: udev_event_run: seq 1740 finished
Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1740, pid [5600] exit with 0, 0 seconds old
Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1741 forked, pid [5601], 'add' 'module', 0 seconds old
Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1742 forked, pid [5602], 'add' 'drivers', 0 seconds old
Nov 26 17:30:13 localhost kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Handspring Visor / Palm OS
Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1743 forked, pid [5603], 'add' 'drivers', 0 seconds old
Nov 26 17:30:13 localhost kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 3.5
Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1744 forked, pid [5604], 'add' 'drivers', 0 seconds old
Nov 26 17:30:13 localhost kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 5.0
Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1745 forked, pid [5605], 'add' 'drivers', 0 seconds old
Nov 26 17:30:13 localhost kernel: visor 1-1:1.0: usb_probe_interface
Nov 26 17:30:13 localhost kernel: visor 1-1:1.0: usb_probe_interface - got id
Nov 26 17:30:13 localhost udevd-event[5601]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:13 localhost udevd-event[5601]: pass_env_to_socket: passed 105 bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:13 localhost udevd-event[5601]: udev_event_run: seq 1741 finished
Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1741, pid [5601] exit with 0, 0 seconds old
Nov 26 17:30:13 localhost udevd-event[5602]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:13 localhost udevd-event[5602]: pass_env_to_socket: passed 138 bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:13 localhost udevd-event[5602]: udev_event_run: seq 1742 finished
Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1742, pid [5602] exit with 0, 0 seconds old
Nov 26 17:30:13 localhost udevd-event[5603]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:13 localhost udevd-event[5603]: pass_env_to_socket: passed 144 bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:13 localhost udevd-event[5603]: udev_event_run: seq 1743 finished
Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1743, pid [5603] exit with 0, 0 seconds old
Nov 26 17:30:13 localhost udevd-event[5604]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:13 localhost udevd-event[5604]: pass_env_to_socket: passed 140 bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:13 localhost udevd-event[5604]: udev_event_run: seq 1744 finished
Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1744, pid [5604] exit with 0, 0 seconds old
Nov 26 17:30:13 localhost udevd-event[5605]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:13 localhost udevd-event[5605]: pass_env_to_socket: passed 124 bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:13 localhost udevd-event[5605]: udev_event_run: seq 1745 finished
Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1745, pid [5605] exit with 0, 0 seconds old
Nov 26 17:30:13 localhost kernel: usb 1-1: Handspring Visor / Palm OS: port 1, is for Generic use
Nov 26 17:30:13 localhost kernel: usb 1-1: Handspring Visor / Palm OS: port 2, is for HotSync use
Nov 26 17:30:13 localhost kernel: usb 1-1: Handspring Visor / Palm OS: Number of ports: 2
Nov 26 17:30:13 localhost kernel: visor 1-1:1.0: Handspring Visor / Palm OS converter detected
Nov 26 17:30:13 localhost kernel: usb 1-1: Handspring Visor / Palm OS converter now attached to ttyUSB0
Nov 26 17:30:13 localhost kernel: usb 1-1: Handspring Visor / Palm OS converter now attached to ttyUSB1
Nov 26 17:30:13 localhost kernel: usbcore: registered new driver visor
Nov 26 17:30:13 localhost kernel: drivers/usb/serial/visor.c: USB HandSpring Visor / Palm OS driver
Nov 26 17:30:13 localhost udevd-event[5595]: run_program: '/sbin/modprobe' returned with status 0
Nov 26 17:30:13 localhost udevd-event[5595]: pass_env_to_socket: passed 322 bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:13 localhost udevd-event[5595]: udev_event_run: seq 1735 finished
Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1735, pid [5595] exit with 0, 0 seconds old
Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1736 forked, pid [5606], 'add' 'usb_device', 0 seconds old
Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1746 forked, pid [5607], 'add' 'usb-serial', 0 seconds old
Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1748 forked, pid [5608], 'add' 'usb-serial', 0 seconds old
Nov 26 17:30:13 localhost udevd-event[5606]: run_program: '/bin/sh -c 'K=usbdev1.5; K=${K#usbdev}; printf bus/usb/%03i/%03i ${K%%.*} ${K#*.}''
Nov 26 17:30:13 localhost udevd-event[5606]: run_program: '/bin/sh' (stdout) 'bus/usb/001/005'
Nov 26 17:30:13 localhost udevd-event[5606]: run_program: '/bin/sh' returned with status 0
Nov 26 17:30:13 localhost udevd-event[5606]: udev_rules_get_name: rule applied, 'usbdev1.5' becomes 'bus/usb/001/005'
Nov 26 17:30:13 localhost udevd-event[5606]: udev_db_get_device: no db file to read /dev/.udev/db/class@usb_device@usbdev1.5: No such file or directory
Nov 26 17:30:13 localhost udevd-event[5606]: udev_node_add: creating device node '/dev/bus/usb/001/005', major = '189', minor = '4', mode = '0664', uid = '0', gid = '0'
Nov 26 17:30:13 localhost udevd-event[5606]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:14 localhost udevd-event[5606]: pass_env_to_socket: passed 271 bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:14 localhost udevd-event[5606]: udev_event_run: seq 1736 finished
Nov 26 17:30:14 localhost udevd[5584]: udev_done: seq 1736, pid [5606] exit with 0, 1 seconds old
Nov 26 17:30:14 localhost udevd-event[5607]: wait_for_sysfs: file '/sys/devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/ttyUSB0/bus' appeared after 0 loops
Nov 26 17:30:14 localhost udevd-event[5607]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:14 localhost udevd-event[5607]: pass_env_to_socket: passed 219 bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:14 localhost udevd-event[5607]: udev_event_run: seq 1746 finished
Nov 26 17:30:14 localhost udevd[5584]: udev_done: seq 1746, pid [5607] exit with 0, 1 seconds old
Nov 26 17:30:14 localhost udevd[5584]: udev_event_run: seq 1747 forked, pid [5610], 'add' 'tty', 1 seconds old
Nov 26 17:30:14 localhost udevd-event[5608]: wait_for_sysfs: file '/sys/devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/ttyUSB1/bus' appeared after 0 loops
Nov 26 17:30:14 localhost udevd-event[5608]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:14 localhost udevd-event[5608]: pass_env_to_socket: passed 219 bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:14 localhost udevd-event[5608]: udev_event_run: seq 1748 finished
Nov 26 17:30:14 localhost udevd[5584]: udev_done: seq 1748, pid [5608] exit with 0, 1 seconds old
Nov 26 17:30:14 localhost udevd[5584]: udev_event_run: seq 1749 forked, pid [5611], 'add' 'tty', 1 seconds old
Nov 26 17:30:14 localhost udevd-event[5610]: udev_rules_get_name: add symlink 'pilot'
Nov 26 17:30:14 localhost udevd-event[5610]: udev_rules_get_name: no node name set, will use kernel name 'ttyUSB0'
Nov 26 17:30:14 localhost udevd-event[5610]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@ttyUSB0: No such file or directory
Nov 26 17:30:14 localhost udevd-event[5610]: udev_node_add: creating device node '/dev/ttyUSB0', major = '188', minor = '0', mode = '0660', uid = '0', gid = '20'
Nov 26 17:30:14 localhost udevd-event[5610]: udev_node_add: creating symlink '/dev/pilot' to 'ttyUSB0'
Nov 26 17:30:14 localhost udevd-event[5610]: udev_node_symlink: creating symlink '/dev/pilot' to 'ttyUSB0'
Nov 26 17:30:14 localhost udevd-event[5610]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:14 localhost udevd-event[5610]: pass_env_to_socket: passed 283 bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:14 localhost udevd-event[5610]: udev_event_run: seq 1747 finished
Nov 26 17:30:14 localhost udevd[5584]: udev_done: seq 1747, pid [5610] exit with 0, 1 seconds old
Nov 26 17:30:14 localhost udevd-event[5611]: udev_rules_get_name: add symlink 'pilot'
Nov 26 17:30:14 localhost udevd-event[5611]: udev_rules_get_name: no node name set, will use kernel name 'ttyUSB1'
Nov 26 17:30:14 localhost udevd-event[5611]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@ttyUSB1: No such file or directory
Nov 26 17:30:14 localhost udevd-event[5611]: udev_node_add: creating device node '/dev/ttyUSB1', major = '188', minor = '1', mode = '0660', uid = '0', gid = '20'
Nov 26 17:30:14 localhost udevd-event[5611]: udev_node_add: creating symlink '/dev/pilot' to 'ttyUSB1'
Nov 26 17:30:14 localhost udevd-event[5611]: udev_node_symlink: link '/dev/pilot' points to different target 'ttyUSB0', delete it
Nov 26 17:30:14 localhost udevd-event[5611]: udev_node_symlink: creating symlink '/dev/pilot' to 'ttyUSB1'
Nov 26 17:30:14 localhost udevd-event[5611]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:14 localhost udevd-event[5611]: pass_env_to_socket: passed 283 bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:14 localhost udevd-event[5611]: udev_event_run: seq 1749 finished
Nov 26 17:30:14 localhost udevd[5584]: udev_done: seq 1749, pid [5611] exit with 0, 1 seconds old
Nov 26 17:30:14 localhost kernel: ohci_hcd 0000:00:02.0: urb f4db6b40 path 1 ep2in 5e160000 cc 5 --> status -110
Nov 26 17:30:14 localhost udevd[5584]: udev_event_run: seq 1750 forked, pid [5612], 'remove' 'usb', 0 seconds old
Nov 26 17:30:14 localhost udevd[5584]: udev_event_run: seq 1751 forked, pid [5613], 'remove' 'usb_device', 0 seconds old
Nov 26 17:30:14 localhost kernel: hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0002
Nov 26 17:30:14 localhost kernel: ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00030100 PESC CSC PPS
Nov 26 17:30:14 localhost kernel: hub 1-0:1.0: port 1, status 0100, change 0003, 12 Mb/s
Nov 26 17:30:14 localhost kernel: usb 1-1: USB disconnect, address 5
Nov 26 17:30:14 localhost kernel: usb 1-1: usb_disable_device nuking all URBs
Nov 26 17:30:14 localhost kernel: usb 1-1: unregistering interface 1-1:1.0
Nov 26 17:30:14 localhost kernel: visor 1-1:1.0: device disconnected
Nov 26 17:30:14 localhost kernel: usb 1-1:1.0: uevent
Nov 26 17:30:14 localhost kernel: usb 1-1: unregistering device
Nov 26 17:30:14 localhost kernel: usb 1-1: uevent
Nov 26 17:30:14 localhost kernel: hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
Nov 26 17:30:16 localhost udevd-event[5612]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:16 localhost udevd-event[5612]: pass_env_to_socket: passed 328 bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:16 localhost udevd-event[5612]: udev_event_run: seq 1750 finished
Nov 26 17:30:16 localhost udevd[5584]: udev_done: seq 1750, pid [5612] exit with 0, 2 seconds old
Nov 26 17:30:16 localhost udevd[5584]: udev_event_run: seq 1752 forked, pid [5614], 'remove' 'usb', 2 seconds old
Nov 26 17:30:16 localhost udevd-event[5613]: udev_db_get_device: found a symlink as db file
Nov 26 17:30:16 localhost udevd-event[5613]: udev_node_remove: removing device node '/dev/bus/usb/001/005'
Nov 26 17:30:16 localhost udevd-event[5613]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:16 localhost udevd-event[5613]: pass_env_to_socket: passed 277 bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:16 localhost udevd-event[5613]: udev_event_run: seq 1751 finished
Nov 26 17:30:16 localhost udevd[5584]: udev_done: seq 1751, pid [5613] exit with 0, 2 seconds old
Nov 26 17:30:16 localhost udevd-event[5614]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:16 localhost udevd-event[5614]: pass_env_to_socket: passed 179 bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:16 localhost udevd-event[5614]: udev_event_run: seq 1752 finished
Nov 26 17:30:16 localhost udevd[5584]: udev_done: seq 1752, pid [5614] exit with 0, 2 seconds old
Version: KPilot 4.6.0 (blivit) Version: pilot-link 0.12.1 Version: KDE 3.5.5 Version: Qt 3.3.7 HotSync-Protokoll 17:51:02 KPilot Dämon wird gestartet ... 17:51:03 Der Status des Dämons ist "läuft nicht" 17:51:03 Pilot-Gerät /dev/ttyUSB1 existiert nicht. Das Gerät ist wahrscheinlich ein USB-Gerät und erscheint erst während einem Abgleich. 17:51:44 Geräteverbindung hergestellt.
Reply to: