Re: Scheda video AMD Radeon 5500 XT: driver sì o no?
Il 07/05/20 17:27, Mario ha scritto:
> Il 07/05/20 16:59, Federico Di Gregorio ha scritto:
>
>> Non dovresti avere problemi (io ho una 5700 XT che è quasi la stessa
>> cosa e funziona benissimo). Installa i seguenti pacchetti:
>>
>> firmware-amd-graphics
>> libdrm-amdgpu1
>> xserver-xorg-video-amdgpu
>
> Sono tutti e tre già installati.
>
>> L'ultimo se utilizzi solo ed esclusivamente Wayland può non servire.
>>
>> Se non funziona, per favore, incolla tutto il log del kernel, non solo 3
>> righe, altrimenti non si capisce cosa non funzioni.
>
> Appena rimonto la scheda, vi aggiorno.
>
>
Schermo spento.
Come promesso in allegato il dmesg.
[ 0.000000] microcode: microcode updated early to revision 0xca, date = 2019-10-03
[ 0.000000] Linux version 5.6.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 9.3.0 (Debian 9.3.0-11)) #1 SMP Debian 5.6.7-1 (2020-04-29)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.6.0-1-amd64 root=UUID=d952ba42-0a44-4e0d-8043-cfbb6a0a0c33 ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000008ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x0000000000090fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000091000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008d227fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008d228000-0x000000008ea92fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008ea93000-0x000000008ec6dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008ec6e000-0x000000008ece6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008ece7000-0x000000008f50efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008f50f000-0x000000008f50ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008f510000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000046dffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x81aad018-0x81ac5a57] usable ==> usable
[ 0.000000] e820: update [mem 0x81aad018-0x81ac5a57] usable ==> usable
[ 0.000000] e820: update [mem 0x81a9c018-0x81aace57] usable ==> usable
[ 0.000000] e820: update [mem 0x81a9c018-0x81aace57] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000000fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000001000-0x000000000008ffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x0000000000090fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000091000-0x000000000009efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000081a9c017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000081a9c018-0x0000000081aace57] usable
[ 0.000000] reserve setup_data: [mem 0x0000000081aace58-0x0000000081aad017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000081aad018-0x0000000081ac5a57] usable
[ 0.000000] reserve setup_data: [mem 0x0000000081ac5a58-0x000000008d227fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008d228000-0x000000008ea92fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008ea93000-0x000000008ec6dfff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000008ec6e000-0x000000008ece6fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000008ece7000-0x000000008f50efff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008f50f000-0x000000008f50ffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008f510000-0x000000008fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000046dffffff] usable
[ 0.000000] efi: EFI v2.70 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0x8ec0a000 ACPI=0x8ec0a000 SMBIOS=0x8f29b000 SMBIOS 3.0=0x8f29a000 MEMATTR=0x8ac45018 ESRT=0x8ac8b118 RNG=0x8f2c7918
[ 0.000000] efi: seeding entropy pool
[ 0.000000] secureboot: Secure boot disabled
[ 0.000000] SMBIOS 3.2.1 present.
[ 0.000000] DMI: System manufacturer System Product Name/PRIME Z390-A, BIOS 1302 09/02/2019
[ 0.000000] tsc: Detected 3700.000 MHz processor
[ 0.000007] tsc: Detected 3699.850 MHz TSC
[ 0.000007] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000008] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000012] last_pfn = 0x46e000 max_arch_pfn = 0x400000000
[ 0.000014] MTRR default type: write-back
[ 0.000015] MTRR fixed ranges enabled:
[ 0.000015] 00000-9FFFF write-back
[ 0.000016] A0000-BFFFF uncachable
[ 0.000017] C0000-FFFFF write-protect
[ 0.000017] MTRR variable ranges enabled:
[ 0.000018] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000018] 1 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000019] 2 base 0090000000 mask 7FF0000000 uncachable
[ 0.000019] 3 base 2000000000 mask 6000000000 uncachable
[ 0.000020] 4 base 1000000000 mask 7000000000 uncachable
[ 0.000020] 5 base 0800000000 mask 7800000000 uncachable
[ 0.000021] 6 base 4000000000 mask 4000000000 uncachable
[ 0.000021] 7 disabled
[ 0.000021] 8 disabled
[ 0.000022] 9 disabled
[ 0.000248] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000333] last_pfn = 0x8f510 max_arch_pfn = 0x400000000
[ 0.005920] esrt: Reserving ESRT space from 0x000000008ac8b118 to 0x000000008ac8b150.
[ 0.005923] e820: update [mem 0x8ac8b000-0x8ac8bfff] usable ==> reserved
[ 0.005943] Using GB pages for direct mapping
[ 0.005944] BRK [0x3e9a01000, 0x3e9a01fff] PGTABLE
[ 0.005945] BRK [0x3e9a02000, 0x3e9a02fff] PGTABLE
[ 0.005946] BRK [0x3e9a03000, 0x3e9a03fff] PGTABLE
[ 0.005964] BRK [0x3e9a04000, 0x3e9a04fff] PGTABLE
[ 0.005965] BRK [0x3e9a05000, 0x3e9a05fff] PGTABLE
[ 0.006053] BRK [0x3e9a06000, 0x3e9a06fff] PGTABLE
[ 0.006082] BRK [0x3e9a07000, 0x3e9a07fff] PGTABLE
[ 0.006131] BRK [0x3e9a08000, 0x3e9a08fff] PGTABLE
[ 0.006178] RAMDISK: [mem 0x3c40f000-0x3fffdfff]
[ 0.006189] ACPI: Early table checksum verification disabled
[ 0.006190] ACPI: RSDP 0x000000008EC0A000 000024 (v02 ALASKA)
[ 0.006192] ACPI: XSDT 0x000000008EC0A0B8 0000E4 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.006196] ACPI: FACP 0x000000008EC4CFB0 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.006199] ACPI: DSDT 0x000000008EC0A230 042D7F (v02 ALASKA A M I 01072009 INTL 20160527)
[ 0.006201] ACPI: FACS 0x000000008ECE6080 000040
[ 0.006202] ACPI: APIC 0x000000008EC4D0C8 0000A0 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.006204] ACPI: FPDT 0x000000008EC4D168 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.006205] ACPI: FIDT 0x000000008EC4D1B0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.006207] ACPI: MCFG 0x000000008EC4D250 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.006208] ACPI: WSMT 0x000000008EC6BBF0 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.006210] ACPI: SSDT 0x000000008EC4D2E8 001B1C (v02 CpuRef CpuSsdt 00003000 INTL 20160527)
[ 0.006212] ACPI: SSDT 0x000000008EC4EE08 003099 (v02 SaSsdt SaSsdt 00003000 INTL 20160527)
[ 0.006213] ACPI: SSDT 0x000000008EC51EA8 00232B (v02 PegSsd PegSsdt 00001000 INTL 20160527)
[ 0.006215] ACPI: HPET 0x000000008EC541D8 000038 (v01 ALASKA A M I 00000002 01000013)
[ 0.006217] ACPI: SSDT 0x000000008EC54210 000FAE (v02 ALASKA Ther_Rvp 00001000 INTL 20160527)
[ 0.006218] ACPI: SSDT 0x000000008EC551C0 002FD3 (v02 INTEL xh_cfsd4 00000000 INTL 20160527)
[ 0.006220] ACPI: UEFI 0x000000008EC58198 000042 (v01 ALASKA A M I 00000002 01000013)
[ 0.006221] ACPI: LPIT 0x000000008EC581E0 000094 (v01 ALASKA A M I 00000002 01000013)
[ 0.006223] ACPI: SSDT 0x000000008EC58278 0027DE (v02 ALASKA PtidDevc 00001000 INTL 20160527)
[ 0.006225] ACPI: SSDT 0x000000008EC5AA58 0014E2 (v02 ALASKA TbtTypeC 00000000 INTL 20160527)
[ 0.006226] ACPI: DBGP 0x000000008EC5BF40 000034 (v01 ALASKA A M I 00000002 01000013)
[ 0.006228] ACPI: DBG2 0x000000008EC5BF78 000054 (v00 ALASKA A M I 00000002 01000013)
[ 0.006229] ACPI: SSDT 0x000000008EC5BFD0 001B67 (v02 ALASKA UsbCTabl 00001000 INTL 20160527)
[ 0.006231] ACPI: DMAR 0x000000008EC5DB38 000070 (v01 INTEL EDK2 00000002 01000013)
[ 0.006232] ACPI: SSDT 0x000000008EC5DBA8 000144 (v02 Intel ADebTabl 00001000 INTL 20160527)
[ 0.006234] ACPI: VFCT 0x000000008EC5DCF0 00DE84 (v01 ALASKA A M I 00000001 AMD 31504F47)
[ 0.006236] ACPI: BGRT 0x000000008EC6BB78 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.006237] ACPI: WPBT 0x000000008EC6BBB0 00003C (v01 ALASKA A M I 00000001 ASUS 00000001)
[ 0.006242] ACPI: Local APIC address 0xfee00000
[ 0.006535] No NUMA configuration found
[ 0.006536] Faking a node at [mem 0x0000000000000000-0x000000046dffffff]
[ 0.006538] NODE_DATA(0) allocated [mem 0x46dffb000-0x46dffffff]
[ 0.006558] Zone ranges:
[ 0.006558] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.006559] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.006560] Normal [mem 0x0000000100000000-0x000000046dffffff]
[ 0.006560] Device empty
[ 0.006561] Movable zone start for each node
[ 0.006561] Early memory node ranges
[ 0.006562] node 0: [mem 0x0000000000001000-0x000000000008ffff]
[ 0.006562] node 0: [mem 0x0000000000091000-0x000000000009efff]
[ 0.006563] node 0: [mem 0x0000000000100000-0x000000008d227fff]
[ 0.006563] node 0: [mem 0x000000008f50f000-0x000000008f50ffff]
[ 0.006564] node 0: [mem 0x0000000100000000-0x000000046dffffff]
[ 0.006686] Zeroed struct page in unavailable ranges: 20026 pages
[ 0.006687] Initmem setup node 0 [mem 0x0000000000001000-0x000000046dffffff]
[ 0.006688] On node 0 totalpages: 4174278
[ 0.006689] DMA zone: 64 pages used for memmap
[ 0.006689] DMA zone: 22 pages reserved
[ 0.006689] DMA zone: 3997 pages, LIFO batch:0
[ 0.006734] DMA32 zone: 8969 pages used for memmap
[ 0.006735] DMA32 zone: 573993 pages, LIFO batch:63
[ 0.012843] Normal zone: 56192 pages used for memmap
[ 0.012844] Normal zone: 3596288 pages, LIFO batch:63
[ 0.013698] ACPI: PM-Timer IO Port: 0x1808
[ 0.013699] ACPI: Local APIC address 0xfee00000
[ 0.013702] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.013703] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.013703] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.013703] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.013704] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.013704] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.013771] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.013772] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.013773] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.013774] ACPI: IRQ0 used by override.
[ 0.013774] ACPI: IRQ9 used by override.
[ 0.013775] Using ACPI (MADT) for SMP configuration information
[ 0.013776] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.013780] e820: update [mem 0x88847000-0x8893afff] usable ==> reserved
[ 0.013786] smpboot: Allowing 6 CPUs, 0 hotplug CPUs
[ 0.013797] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.013798] PM: hibernation: Registered nosave memory: [mem 0x00090000-0x00090fff]
[ 0.013799] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ 0.013800] PM: hibernation: Registered nosave memory: [mem 0x81a9c000-0x81a9cfff]
[ 0.013801] PM: hibernation: Registered nosave memory: [mem 0x81aac000-0x81aacfff]
[ 0.013801] PM: hibernation: Registered nosave memory: [mem 0x81aad000-0x81aadfff]
[ 0.013802] PM: hibernation: Registered nosave memory: [mem 0x81ac5000-0x81ac5fff]
[ 0.013803] PM: hibernation: Registered nosave memory: [mem 0x88847000-0x8893afff]
[ 0.013804] PM: hibernation: Registered nosave memory: [mem 0x8ac8b000-0x8ac8bfff]
[ 0.013805] PM: hibernation: Registered nosave memory: [mem 0x8d228000-0x8ea92fff]
[ 0.013805] PM: hibernation: Registered nosave memory: [mem 0x8ea93000-0x8ec6dfff]
[ 0.013805] PM: hibernation: Registered nosave memory: [mem 0x8ec6e000-0x8ece6fff]
[ 0.013806] PM: hibernation: Registered nosave memory: [mem 0x8ece7000-0x8f50efff]
[ 0.013806] PM: hibernation: Registered nosave memory: [mem 0x8f510000-0x8fffffff]
[ 0.013807] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xdfffffff]
[ 0.013807] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.013807] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.013808] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.013808] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.013808] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.013809] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.013809] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.013809] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfedfffff]
[ 0.013810] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.013810] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.013810] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.013811] [mem 0x90000000-0xdfffffff] available for PCI devices
[ 0.013812] Booting paravirtualized kernel on bare hardware
[ 0.013814] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.016335] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
[ 0.016443] percpu: Embedded 55 pages/cpu s188120 r8192 d28968 u262144
[ 0.016447] pcpu-alloc: s188120 r8192 d28968 u262144 alloc=1*2097152
[ 0.016448] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.016462] Built 1 zonelists, mobility grouping on. Total pages: 4109031
[ 0.016462] Policy zone: Normal
[ 0.016463] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.6.0-1-amd64 root=UUID=d952ba42-0a44-4e0d-8043-cfbb6a0a0c33 ro quiet
[ 0.017060] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.017341] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.017382] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.026592] Memory: 2243760K/16697112K available (10243K kernel code, 1283K rwdata, 3968K rodata, 1608K init, 1988K bss, 512424K reserved, 0K cma-reserved)
[ 0.026596] random: get_random_u64 called from __kmem_cache_create+0x3e/0x530 with crng_init=0
[ 0.026657] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.026664] ftrace: allocating 34607 entries in 136 pages
[ 0.034967] ftrace: allocated 136 pages with 2 groups
[ 0.035012] rcu: Hierarchical RCU implementation.
[ 0.035012] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=6.
[ 0.035013] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.035014] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[ 0.036825] NR_IRQS: 33024, nr_irqs: 1536, preallocated irqs: 16
[ 0.037340] random: crng done (trusting CPU's manufacturer)
[ 0.037355] Console: colour dummy device 80x25
[ 0.037358] printk: console [tty0] enabled
[ 0.037368] ACPI: Core revision 20200110
[ 0.037779] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.037919] APIC: Switch to symmetric I/O mode setup
[ 0.037920] DMAR: Host address width 39
[ 0.037921] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.037924] DMAR: dmar0: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.037925] DMAR: RMRR base: 0x0000008da40000 end: 0x0000008da5ffff
[ 0.037927] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 0
[ 0.037927] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.037928] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.040859] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.040859] x2apic enabled
[ 0.040890] Switched APIC routing to cluster x2apic.
[ 0.050183] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.069842] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6aa99074b1c, max_idle_ns: 881590506587 ns
[ 0.069844] Calibrating delay loop (skipped), value calculated using timer frequency.. 7399.70 BogoMIPS (lpj=14799400)
[ 0.069845] pid_max: default: 32768 minimum: 301
[ 0.071631] efi: memattr: Entry attributes invalid: RO and XP bits both cleared
[ 0.071633] efi: memattr: ! 0x000000090000-0x000000090fff [Runtime Code |RUN| | | | | | | | | | | | ]
[ 0.073517] LSM: Security Framework initializing
[ 0.073521] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.073531] AppArmor: AppArmor initialized
[ 0.073532] TOMOYO Linux initialized
[ 0.073556] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.073571] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.073720] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.073739] process: using mwait in idle threads
[ 0.073740] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[ 0.073740] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.073742] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.073743] Spectre V2 : Mitigation: Full generic retpoline
[ 0.073743] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.073744] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.073744] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.073745] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.073747] TAA: Mitigation: Clear CPU buffers
[ 0.073747] MDS: Mitigation: Clear CPU buffers
[ 0.073905] Freeing SMP alternatives memory: 32K
[ 0.077906] TSC deadline timer enabled
[ 0.077917] smpboot: CPU0: Intel(R) Core(TM) i5-9600K CPU @ 3.70GHz (family: 0x6, model: 0x9e, stepping: 0xc)
[ 0.077981] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.077984] ... version: 4
[ 0.077985] ... bit width: 48
[ 0.077985] ... generic registers: 8
[ 0.077985] ... value mask: 0000ffffffffffff
[ 0.077986] ... max period: 00007fffffffffff
[ 0.077986] ... fixed-purpose events: 3
[ 0.077986] ... event mask: 00000007000000ff
[ 0.078010] rcu: Hierarchical SRCU implementation.
[ 0.078380] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.078413] smp: Bringing up secondary CPUs ...
[ 0.078456] x86: Booting SMP configuration:
[ 0.078457] .... node #0, CPUs: #1 #2 #3 #4 #5
[ 0.085915] smp: Brought up 1 node, 6 CPUs
[ 0.085915] smpboot: Max logical packages: 1
[ 0.085915] smpboot: Total of 6 processors activated (44398.20 BogoMIPS)
[ 0.113847] node 0 initialised, 3485232 pages in 28ms
[ 0.114035] devtmpfs: initialized
[ 0.114035] x86/mm: Memory block size: 128MB
[ 0.114828] PM: Registering ACPI NVS region [mem 0x8ec6e000-0x8ece6fff] (495616 bytes)
[ 0.114828] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.114828] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.114828] pinctrl core: initialized pinctrl subsystem
[ 0.114828] thermal_sys: Registered thermal governor 'fair_share'
[ 0.114828] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.114828] thermal_sys: Registered thermal governor 'step_wise'
[ 0.114828] thermal_sys: Registered thermal governor 'user_space'
[ 0.114828] NET: Registered protocol family 16
[ 0.114828] audit: initializing netlink subsys (disabled)
[ 0.114828] audit: type=2000 audit(1588867599.068:1): state=initialized audit_enabled=0 res=1
[ 0.114828] cpuidle: using governor ladder
[ 0.114828] cpuidle: using governor menu
[ 0.114828] ACPI: bus type PCI registered
[ 0.114828] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.114828] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.114828] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.114828] PCI: Using configuration type 1 for base access
[ 0.114828] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.114828] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.114828] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.206557] ACPI: Added _OSI(Module Device)
[ 0.206557] ACPI: Added _OSI(Processor Device)
[ 0.206557] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.206557] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.206557] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.206557] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.206557] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.257001] ACPI: 10 ACPI AML tables successfully acquired and loaded
[ 0.262958] ACPI: Dynamic OEM Table Load:
[ 0.262961] ACPI: SSDT 0xFFFF9559A9ABA500 0000F4 (v02 PmRef Cpu0Psd 00003000 INTL 20160527)
[ 0.263869] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[ 0.264870] ACPI: Dynamic OEM Table Load:
[ 0.264873] ACPI: SSDT 0xFFFF955A1C01A000 0006EC (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
[ 0.265905] ACPI: Dynamic OEM Table Load:
[ 0.265908] ACPI: SSDT 0xFFFF955A1C0DC000 000133 (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
[ 0.266815] ACPI: Dynamic OEM Table Load:
[ 0.266818] ACPI: SSDT 0xFFFF955A1C01F000 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527)
[ 0.267903] ACPI: Dynamic OEM Table Load:
[ 0.267906] ACPI: SSDT 0xFFFF955A1C01C800 0005FC (v02 PmRef ApIst 00003000 INTL 20160527)
[ 0.268917] ACPI: Dynamic OEM Table Load:
[ 0.268920] ACPI: SSDT 0xFFFF9559A9ADA000 000317 (v02 PmRef ApHwp 00003000 INTL 20160527)
[ 0.269945] ACPI: Dynamic OEM Table Load:
[ 0.269948] ACPI: SSDT 0xFFFF9556C75AE000 000AB0 (v02 PmRef ApPsd 00003000 INTL 20160527)
[ 0.272907] ACPI: EC: EC started
[ 0.272907] ACPI: EC: interrupt blocked
[ 0.272917] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.272918] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[ 0.272918] ACPI: Interpreter enabled
[ 0.272948] ACPI: (supports S0 S3 S4 S5)
[ 0.272949] ACPI: Using IOAPIC for interrupt routing
[ 0.272975] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.273753] ACPI: Enabled 7 GPEs in block 00 to 7F
[ 0.284138] ACPI: Power Resource [USBC] (on)
[ 0.286312] ACPI: Power Resource [V0PR] (on)
[ 0.286589] ACPI: Power Resource [V1PR] (on)
[ 0.286861] ACPI: Power Resource [V2PR] (on)
[ 0.290975] ACPI: Power Resource [WRST] (on)
[ 0.294547] ACPI: Power Resource [FN00] (off)
[ 0.294599] ACPI: Power Resource [FN01] (off)
[ 0.294648] ACPI: Power Resource [FN02] (off)
[ 0.294697] ACPI: Power Resource [FN03] (off)
[ 0.294744] ACPI: Power Resource [FN04] (off)
[ 0.295250] ACPI: Power Resource [PIN] (off)
[ 0.295567] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.295571] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.298524] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.299256] PCI host bridge to bus 0000:00
[ 0.299257] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.299258] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.299258] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.299259] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[ 0.299260] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[ 0.299260] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[ 0.299261] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.299269] pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000
[ 0.299540] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.299574] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.299957] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
[ 0.299990] pci 0000:00:14.0: reg 0x10: [mem 0x4010300000-0x401030ffff 64bit]
[ 0.300091] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.300404] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
[ 0.300430] pci 0000:00:14.2: reg 0x10: [mem 0x4010314000-0x4010315fff 64bit]
[ 0.300444] pci 0000:00:14.2: reg 0x18: [mem 0x4010318000-0x4010318fff 64bit]
[ 0.300626] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
[ 0.300656] pci 0000:00:16.0: reg 0x10: [mem 0x4010317000-0x4010317fff 64bit]
[ 0.300743] pci 0000:00:16.0: PME# supported from D3hot
[ 0.300962] pci 0000:00:17.0: [8086:a352] type 00 class 0x010601
[ 0.300990] pci 0000:00:17.0: reg 0x10: [mem 0x90320000-0x90321fff]
[ 0.301000] pci 0000:00:17.0: reg 0x14: [mem 0x90323000-0x903230ff]
[ 0.301011] pci 0000:00:17.0: reg 0x18: [io 0x4050-0x4057]
[ 0.301022] pci 0000:00:17.0: reg 0x1c: [io 0x4040-0x4043]
[ 0.301033] pci 0000:00:17.0: reg 0x20: [io 0x4020-0x403f]
[ 0.301043] pci 0000:00:17.0: reg 0x24: [mem 0x90322000-0x903227ff]
[ 0.301103] pci 0000:00:17.0: PME# supported from D3hot
[ 0.301263] pci 0000:00:1b.0: [8086:a340] type 01 class 0x060400
[ 0.301440] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.301629] pci 0000:00:1b.4: [8086:a32c] type 01 class 0x060400
[ 0.301781] pci 0000:00:1b.4: PME# supported from D0 D3hot D3cold
[ 0.301818] pci 0000:00:1b.4: PTM enabled (root), 4ns granularity
[ 0.301996] pci 0000:00:1c.0: [8086:a338] type 01 class 0x060400
[ 0.302130] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.302359] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400
[ 0.302536] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.302769] pci 0000:00:1f.0: [8086:a305] type 00 class 0x060100
[ 0.303139] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
[ 0.303206] pci 0000:00:1f.3: reg 0x10: [mem 0x4010310000-0x4010313fff 64bit]
[ 0.303269] pci 0000:00:1f.3: reg 0x20: [mem 0x4010200000-0x40102fffff 64bit]
[ 0.303399] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.303948] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
[ 0.304011] pci 0000:00:1f.4: reg 0x10: [mem 0x4010316000-0x40103160ff 64bit]
[ 0.304084] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ 0.304291] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
[ 0.304311] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[ 0.304471] pci 0000:00:1f.6: [8086:15bc] type 00 class 0x020000
[ 0.304527] pci 0000:00:1f.6: reg 0x10: [mem 0x90300000-0x9031ffff]
[ 0.304764] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.304903] pci 0000:01:00.0: [1002:1478] type 01 class 0x060400
[ 0.304923] pci 0000:01:00.0: reg 0x10: [mem 0x90100000-0x90103fff]
[ 0.305004] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.305052] pci 0000:01:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8 GT/s x8 link at 0000:00:01.0 (capable of 126.024 Gb/s with 16 GT/s x8 link)
[ 0.305109] pci 0000:00:01.0: PCI bridge to [bus 01-03]
[ 0.305110] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.305112] pci 0000:00:01.0: bridge window [mem 0x90000000-0x901fffff]
[ 0.305114] pci 0000:00:01.0: bridge window [mem 0x4000000000-0x40101fffff 64bit pref]
[ 0.305146] pci 0000:02:00.0: [1002:1479] type 01 class 0x060400
[ 0.305233] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.305307] pci 0000:01:00.0: PCI bridge to [bus 02-03]
[ 0.305310] pci 0000:01:00.0: bridge window [io 0x3000-0x3fff]
[ 0.305312] pci 0000:01:00.0: bridge window [mem 0x90000000-0x900fffff]
[ 0.305316] pci 0000:01:00.0: bridge window [mem 0x4000000000-0x40101fffff 64bit pref]
[ 0.305345] pci 0000:03:00.0: [1002:7340] type 00 class 0x030000
[ 0.305368] pci 0000:03:00.0: reg 0x10: [mem 0x4000000000-0x400fffffff 64bit pref]
[ 0.305377] pci 0000:03:00.0: reg 0x18: [mem 0x4010000000-0x40101fffff 64bit pref]
[ 0.305382] pci 0000:03:00.0: reg 0x20: [io 0x3000-0x30ff]
[ 0.305388] pci 0000:03:00.0: reg 0x24: [mem 0x90000000-0x9007ffff]
[ 0.305394] pci 0000:03:00.0: reg 0x30: [mem 0x90080000-0x9009ffff pref]
[ 0.305407] pci 0000:03:00.0: BAR 0: assigned to efifb
[ 0.305459] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.305508] pci 0000:03:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8 GT/s x8 link at 0000:00:01.0 (capable of 252.048 Gb/s with 16 GT/s x16 link)
[ 0.305536] pci 0000:03:00.1: [1002:ab38] type 00 class 0x040300
[ 0.305549] pci 0000:03:00.1: reg 0x10: [mem 0x900a0000-0x900a3fff]
[ 0.305615] pci 0000:03:00.1: PME# supported from D1 D2 D3hot D3cold
[ 0.305697] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.305700] pci 0000:02:00.0: bridge window [io 0x3000-0x3fff]
[ 0.305702] pci 0000:02:00.0: bridge window [mem 0x90000000-0x900fffff]
[ 0.305705] pci 0000:02:00.0: bridge window [mem 0x4000000000-0x40101fffff 64bit pref]
[ 0.305821] pci 0000:00:1b.0: PCI bridge to [bus 04]
[ 0.305960] pci 0000:05:00.0: [144d:a808] type 00 class 0x010802
[ 0.306000] pci 0000:05:00.0: reg 0x10: [mem 0x90200000-0x90203fff 64bit]
[ 0.306353] pci 0000:00:1b.4: PCI bridge to [bus 05]
[ 0.306360] pci 0000:00:1b.4: bridge window [mem 0x90200000-0x902fffff]
[ 0.306463] acpiphp: Slot [1] registered
[ 0.306478] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 0.306587] pci 0000:00:1d.0: PCI bridge to [bus 07]
[ 0.307922] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.307979] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1
[ 0.308034] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.308089] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.308145] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.308200] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.308255] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.308310] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.309845] ACPI: EC: interrupt unblocked
[ 0.309845] ACPI: EC: event unblocked
[ 0.309845] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.309845] ACPI: EC: GPE=0x16
[ 0.309845] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[ 0.309845] iommu: Default domain type: Translated
[ 0.309853] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.309853] pci 0000:03:00.0: vgaarb: bridge control possible
[ 0.309853] pci 0000:03:00.0: vgaarb: setting as boot device
[ 0.309853] vgaarb: loaded
[ 0.309882] EDAC MC: Ver: 3.0.0
[ 0.310003] Registered efivars operations
[ 0.310003] PCI: Using ACPI for IRQ routing
[ 0.391228] PCI: pci_cache_line_size set to 64 bytes
[ 0.391369] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.391369] e820: reserve RAM buffer [mem 0x81a9c018-0x83ffffff]
[ 0.391370] e820: reserve RAM buffer [mem 0x81aad018-0x83ffffff]
[ 0.391370] e820: reserve RAM buffer [mem 0x88847000-0x8bffffff]
[ 0.391371] e820: reserve RAM buffer [mem 0x8ac8b000-0x8bffffff]
[ 0.391371] e820: reserve RAM buffer [mem 0x8d228000-0x8fffffff]
[ 0.391372] e820: reserve RAM buffer [mem 0x8f510000-0x8fffffff]
[ 0.391372] e820: reserve RAM buffer [mem 0x46e000000-0x46fffffff]
[ 0.391427] NetLabel: Initializing
[ 0.391427] NetLabel: domain hash size = 128
[ 0.391428] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.391435] NetLabel: unlabeled traffic allowed by default
[ 0.391805] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.391807] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.395909] clocksource: Switched to clocksource tsc-early
[ 0.399909] VFS: Disk quotas dquot_6.6.0
[ 0.399909] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.399909] AppArmor: AppArmor Filesystem Enabled
[ 0.399909] pnp: PnP ACPI init
[ 0.399909] system 00:00: [mem 0x40000000-0x403fffff] could not be reserved
[ 0.399909] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.399909] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.399909] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.399909] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.399909] system 00:03: [io 0x0680-0x069f] has been reserved
[ 0.399909] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.399909] system 00:04: [io 0x1854-0x1857] has been reserved
[ 0.399909] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.399909] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.399909] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.399909] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.399909] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.399909] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.399909] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.399909] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.399909] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.399909] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.399909] system 00:06: [io 0x1800-0x18fe] could not be reserved
[ 0.399909] system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved
[ 0.399909] system 00:06: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[ 0.399909] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved
[ 0.399909] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.399909] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved
[ 0.399909] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.399909] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.399909] system 00:07: [io 0x2000-0x20fe] has been reserved
[ 0.399909] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.401851] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.402528] pnp: PnP ACPI: found 9 devices
[ 0.407683] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.407702] pci 0000:00:1b.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.407704] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[ 0.407705] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
[ 0.407706] pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000
[ 0.407707] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000
[ 0.407708] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000 add_align 100000
[ 0.407712] pci 0000:00:1b.0: BAR 14: assigned [mem 0x90400000-0x905fffff]
[ 0.407714] pci 0000:00:1b.0: BAR 15: assigned [mem 0x4010400000-0x40105fffff 64bit pref]
[ 0.407715] pci 0000:00:1d.0: BAR 14: assigned [mem 0x90600000-0x907fffff]
[ 0.407717] pci 0000:00:1d.0: BAR 15: assigned [mem 0x4010600000-0x40107fffff 64bit pref]
[ 0.407718] pci 0000:00:1b.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.407719] pci 0000:00:1d.0: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.407721] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.407723] pci 0000:02:00.0: bridge window [io 0x3000-0x3fff]
[ 0.407726] pci 0000:02:00.0: bridge window [mem 0x90000000-0x900fffff]
[ 0.407728] pci 0000:02:00.0: bridge window [mem 0x4000000000-0x40101fffff 64bit pref]
[ 0.407731] pci 0000:01:00.0: PCI bridge to [bus 02-03]
[ 0.407733] pci 0000:01:00.0: bridge window [io 0x3000-0x3fff]
[ 0.407735] pci 0000:01:00.0: bridge window [mem 0x90000000-0x900fffff]
[ 0.407738] pci 0000:01:00.0: bridge window [mem 0x4000000000-0x40101fffff 64bit pref]
[ 0.407741] pci 0000:00:01.0: PCI bridge to [bus 01-03]
[ 0.407742] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.407743] pci 0000:00:01.0: bridge window [mem 0x90000000-0x901fffff]
[ 0.407745] pci 0000:00:01.0: bridge window [mem 0x4000000000-0x40101fffff 64bit pref]
[ 0.407747] pci 0000:00:1b.0: PCI bridge to [bus 04]
[ 0.407757] pci 0000:00:1b.0: bridge window [io 0x5000-0x5fff]
[ 0.407762] pci 0000:00:1b.0: bridge window [mem 0x90400000-0x905fffff]
[ 0.407766] pci 0000:00:1b.0: bridge window [mem 0x4010400000-0x40105fffff 64bit pref]
[ 0.407772] pci 0000:00:1b.4: PCI bridge to [bus 05]
[ 0.407779] pci 0000:00:1b.4: bridge window [mem 0x90200000-0x902fffff]
[ 0.407788] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 0.407803] pci 0000:00:1d.0: PCI bridge to [bus 07]
[ 0.407807] pci 0000:00:1d.0: bridge window [io 0x6000-0x6fff]
[ 0.407812] pci 0000:00:1d.0: bridge window [mem 0x90600000-0x907fffff]
[ 0.407815] pci 0000:00:1d.0: bridge window [mem 0x4010600000-0x40107fffff 64bit pref]
[ 0.407822] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.407823] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.407823] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.407824] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
[ 0.407825] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window]
[ 0.407825] pci_bus 0000:00: resource 9 [mem 0xfc800000-0xfe7fffff window]
[ 0.407826] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.407827] pci_bus 0000:01: resource 1 [mem 0x90000000-0x901fffff]
[ 0.407827] pci_bus 0000:01: resource 2 [mem 0x4000000000-0x40101fffff 64bit pref]
[ 0.407828] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.407828] pci_bus 0000:02: resource 1 [mem 0x90000000-0x900fffff]
[ 0.407829] pci_bus 0000:02: resource 2 [mem 0x4000000000-0x40101fffff 64bit pref]
[ 0.407830] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.407830] pci_bus 0000:03: resource 1 [mem 0x90000000-0x900fffff]
[ 0.407831] pci_bus 0000:03: resource 2 [mem 0x4000000000-0x40101fffff 64bit pref]
[ 0.407832] pci_bus 0000:04: resource 0 [io 0x5000-0x5fff]
[ 0.407832] pci_bus 0000:04: resource 1 [mem 0x90400000-0x905fffff]
[ 0.407833] pci_bus 0000:04: resource 2 [mem 0x4010400000-0x40105fffff 64bit pref]
[ 0.407833] pci_bus 0000:05: resource 1 [mem 0x90200000-0x902fffff]
[ 0.407834] pci_bus 0000:07: resource 0 [io 0x6000-0x6fff]
[ 0.407835] pci_bus 0000:07: resource 1 [mem 0x90600000-0x907fffff]
[ 0.407835] pci_bus 0000:07: resource 2 [mem 0x4010600000-0x40107fffff 64bit pref]
[ 0.407934] NET: Registered protocol family 2
[ 0.408002] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.408013] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.408091] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.408153] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.408168] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.408187] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.408237] NET: Registered protocol family 1
[ 0.408240] NET: Registered protocol family 44
[ 0.408445] pci 0000:03:00.0: disabling ATS
[ 0.408450] pci 0000:03:00.1: D0 power state depends on 0000:03:00.0
[ 0.408479] PCI: CLS 64 bytes, default 64
[ 0.408529] Trying to unpack rootfs image as initramfs...
[ 1.039026] Freeing initrd memory: 61372K
[ 1.039103] DMAR: No ATSR found
[ 1.039125] DMAR: dmar0: Using Queued invalidation
[ 1.039200] pci 0000:00:00.0: Adding to iommu group 0
[ 1.039229] pci 0000:00:01.0: Adding to iommu group 1
[ 1.039275] pci 0000:00:14.0: Adding to iommu group 2
[ 1.039280] pci 0000:00:14.2: Adding to iommu group 2
[ 1.039307] pci 0000:00:16.0: Adding to iommu group 3
[ 1.039334] pci 0000:00:17.0: Adding to iommu group 4
[ 1.039377] pci 0000:00:1b.0: Adding to iommu group 5
[ 1.039414] pci 0000:00:1b.4: Adding to iommu group 6
[ 1.039453] pci 0000:00:1c.0: Adding to iommu group 7
[ 1.039486] pci 0000:00:1d.0: Adding to iommu group 8
[ 1.040539] pci 0000:00:1f.0: Adding to iommu group 9
[ 1.040545] pci 0000:00:1f.3: Adding to iommu group 9
[ 1.040552] pci 0000:00:1f.4: Adding to iommu group 9
[ 1.040557] pci 0000:00:1f.5: Adding to iommu group 9
[ 1.040563] pci 0000:00:1f.6: Adding to iommu group 9
[ 1.040569] pci 0000:01:00.0: Adding to iommu group 1
[ 1.040574] pci 0000:02:00.0: Adding to iommu group 1
[ 1.040582] pci 0000:03:00.0: Adding to iommu group 1
[ 1.040589] pci 0000:03:00.1: Adding to iommu group 1
[ 1.040627] pci 0000:05:00.0: Adding to iommu group 10
[ 1.040628] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 1.041968] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 1.042218] Initialise system trusted keyrings
[ 1.042224] Key type blacklist registered
[ 1.042245] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 1.042934] zbud: loaded
[ 1.043021] Platform Keyring initialized
[ 1.043022] Key type asymmetric registered
[ 1.043022] Asymmetric key parser 'x509' registered
[ 1.043026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.043045] io scheduler mq-deadline registered
[ 1.047014] pcieport 0000:00:01.0: PME: Signaling with IRQ 121
[ 1.047120] pcieport 0000:00:1b.0: PME: Signaling with IRQ 122
[ 1.047149] pcieport 0000:00:1b.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 1.047396] pcieport 0000:00:1b.4: PME: Signaling with IRQ 123
[ 1.047443] pcieport 0000:00:1b.4: AER: enabled with IRQ 123
[ 1.047484] pcieport 0000:00:1b.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[ 1.047632] pcieport 0000:00:1c.0: PME: Signaling with IRQ 124
[ 1.047788] pcieport 0000:00:1d.0: PME: Signaling with IRQ 125
[ 1.047816] pcieport 0000:00:1d.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 1.048152] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.048162] efifb: probing for efifb
[ 1.048168] efifb: framebuffer at 0x4000000000, using 9000k, total 9000k
[ 1.048169] efifb: mode is 1920x1200x32, linelength=7680, pages=1
[ 1.048169] efifb: scrolling: redraw
[ 1.048170] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.048218] Console: switching to colour frame buffer device 240x75
[ 1.050879] fb0: EFI VGA frame buffer device
[ 1.050883] intel_idle: MWAIT substates: 0x11142120
[ 1.050884] intel_idle: v0.4.1 model 0x9E
[ 1.051078] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.051853] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.051853] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.051976] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.052709] Linux agpgart interface v0.103
[ 1.052744] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.052744] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 1.053033] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.053034] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.053886] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.053959] mousedev: PS/2 mouse device common for all mice
[ 1.054028] rtc_cmos rtc_cmos: RTC can wake from S4
[ 1.055100] rtc_cmos rtc_cmos: registered as rtc0
[ 1.055109] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.055112] intel_pstate: Intel P-state driver initializing
[ 1.055635] intel_pstate: HWP enabled
[ 1.055706] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.055892] drop_monitor: Initializing network drop monitor service
[ 1.055977] NET: Registered protocol family 10
[ 1.061447] Segment Routing with IPv6
[ 1.061456] mip6: Mobile IPv6
[ 1.061457] NET: Registered protocol family 17
[ 1.061534] mpls_gso: MPLS GSO support
[ 1.061811] microcode: sig=0x906ec, pf=0x2, revision=0xca
[ 1.061846] microcode: Microcode Update Driver: v2.2.
[ 1.061847] IPI shorthand broadcast: enabled
[ 1.061850] sched_clock: Marking stable (1053316683, 8527547)->(1085257863, -23413633)
[ 1.061925] registered taskstats version 1
[ 1.061926] Loading compiled-in X.509 certificates
[ 1.074644] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.079547] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.079555] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 1.079563] zswap: loaded using pool lzo/zbud
[ 1.079847] Key type ._fscrypt registered
[ 1.079848] Key type .fscrypt registered
[ 1.079848] Key type fscrypt-provisioning registered
[ 1.079855] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.081189] integrity: Loading X.509 certificate: UEFI:db
[ 1.081296] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
[ 1.081296] integrity: Loading X.509 certificate: UEFI:db
[ 1.081397] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
[ 1.081397] integrity: Loading X.509 certificate: UEFI:db
[ 1.081408] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 1.081408] integrity: Loading X.509 certificate: UEFI:db
[ 1.081417] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 1.081418] integrity: Loading X.509 certificate: UEFI:db
[ 1.081520] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[ 1.083727] rtc_cmos rtc_cmos: setting system clock to 2020-05-07T16:06:40 UTC (1588867600)
[ 1.084287] Freeing unused kernel image (initmem) memory: 1608K
[ 1.109854] Write protecting the kernel read-only data: 16384k
[ 1.110255] Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 1.110320] Freeing unused kernel image (rodata/data gap) memory: 128K
[ 1.140132] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.140132] Run /init as init process
[ 1.140133] with arguments:
[ 1.140133] /init
[ 1.140134] with environment:
[ 1.140134] HOME=/
[ 1.140134] TERM=linux
[ 1.140135] BOOT_IMAGE=/boot/vmlinuz-5.6.0-1-amd64
[ 1.205591] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 1.205603] ACPI: Sleep Button [SLPB]
[ 1.205623] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.205631] ACPI: Power Button [PWRB]
[ 1.205650] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.205667] ACPI: Power Button [PWRF]
[ 1.208153] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02)
[ 1.208181] acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02)
[ 1.208229] acpi PNP0C14:05: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02)
[ 1.212089] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 1.212164] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 1.213853] pps_core: LinuxPPS API ver. 1 registered
[ 1.213854] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.214471] PTP clock support registered
[ 1.215614] SCSI subsystem initialized
[ 1.218855] ACPI: bus type USB registered
[ 1.218863] usbcore: registered new interface driver usbfs
[ 1.218867] usbcore: registered new interface driver hub
[ 1.218875] usbcore: registered new device driver usb
[ 1.221101] cryptd: max_cpu_qlen set to 1000
[ 1.221485] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.221485] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.221818] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.228181] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.228184] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.229271] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[ 1.229276] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.229402] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[ 1.229402] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.229403] usb usb1: Product: xHCI Host Controller
[ 1.229403] usb usb1: Manufacturer: Linux 5.6.0-1-amd64 xhci-hcd
[ 1.229404] usb usb1: SerialNumber: 0000:00:14.0
[ 1.229461] hub 1-0:1.0: USB hub found
[ 1.229478] hub 1-0:1.0: 16 ports detected
[ 1.230410] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.230411] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.230413] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.230430] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
[ 1.230431] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.230431] usb usb2: Product: xHCI Host Controller
[ 1.230432] usb usb2: Manufacturer: Linux 5.6.0-1-amd64 xhci-hcd
[ 1.230432] usb usb2: SerialNumber: 0000:00:14.0
[ 1.230500] hub 2-0:1.0: USB hub found
[ 1.230515] hub 2-0:1.0: 10 ports detected
[ 1.230749] usb: port power management may be unreliable
[ 1.230937] AVX2 version of gcm_enc/dec engaged.
[ 1.230937] AES CTR mode by8 optimization enabled
[ 1.230967] libata version 3.00 loaded.
[ 1.234995] ahci 0000:00:17.0: version 3.0
[ 1.242253] nvme nvme0: pci function 0000:05:00.0
[ 1.245264] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.245265] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 1.302345] scsi host0: ahci
[ 1.302561] scsi host1: ahci
[ 1.302652] scsi host2: ahci
[ 1.302791] scsi host3: ahci
[ 1.302843] scsi host4: ahci
[ 1.302892] scsi host5: ahci
[ 1.302920] ata1: SATA max UDMA/133 abar m2048@0x90322000 port 0x90322100 irq 130
[ 1.302922] ata2: SATA max UDMA/133 abar m2048@0x90322000 port 0x90322180 irq 130
[ 1.302923] ata3: SATA max UDMA/133 abar m2048@0x90322000 port 0x90322200 irq 130
[ 1.302925] ata4: SATA max UDMA/133 abar m2048@0x90322000 port 0x90322280 irq 130
[ 1.302927] ata5: SATA max UDMA/133 abar m2048@0x90322000 port 0x90322300 irq 130
[ 1.302928] ata6: SATA max UDMA/133 abar m2048@0x90322000 port 0x90322380 irq 130
[ 1.333098] [drm] amdgpu kernel modesetting enabled.
[ 1.333123] CRAT table not found
[ 1.333124] Virtual CRAT table created for CPU
[ 1.333124] Parsing CRAT table with 1 nodes
[ 1.333125] Creating topology SYSFS entries
[ 1.333130] Topology: Add CPU node
[ 1.333130] Finished initializing topology
[ 1.333170] checking generic (4000000000 8ca000) vs hw (4000000000 10000000)
[ 1.333170] fb0: switching to amdgpudrmfb from EFI VGA
[ 1.333202] Console: switching to colour dummy device 80x25
[ 1.333215] amdgpu 0000:03:00.0: vgaarb: deactivate vga console
[ 1.333229] amdgpu 0000:03:00.0: enabling device (0006 -> 0007)
[ 1.333339] [drm] initializing kernel modesetting (NAVI14 0x1002:0x7340 0x1458:0x231A 0xC5).
[ 1.333343] [drm] register mmio base: 0x90000000
[ 1.333343] [drm] register mmio size: 524288
[ 1.347310] [drm] set register base offset for ATHUB
[ 1.347310] [drm] set register base offset for CLKA
[ 1.347310] [drm] set register base offset for CLKA
[ 1.347311] [drm] set register base offset for CLKA
[ 1.347311] [drm] set register base offset for CLKA
[ 1.347311] [drm] set register base offset for CLKA
[ 1.347311] [drm] set register base offset for DF
[ 1.347312] [drm] set register base offset for DMU
[ 1.347312] [drm] set register base offset for GC
[ 1.347312] [drm] set register base offset for HDP
[ 1.347313] [drm] set register base offset for MMHUB
[ 1.347313] [drm] set register base offset for MP0
[ 1.347313] [drm] set register base offset for MP1
[ 1.347313] [drm] set register base offset for NBIF
[ 1.347314] [drm] set register base offset for NBIF
[ 1.347314] [drm] set register base offset for OSSSYS
[ 1.347314] [drm] set register base offset for SDMA0
[ 1.347315] [drm] set register base offset for SDMA1
[ 1.347315] [drm] set register base offset for SMUIO
[ 1.347315] [drm] set register base offset for THM
[ 1.347315] [drm] set register base offset for UVD
[ 1.347316] [drm] add ip block number 0 <nv_common>
[ 1.347317] [drm] add ip block number 1 <gmc_v10_0>
[ 1.347317] [drm] add ip block number 2 <navi10_ih>
[ 1.347317] [drm] add ip block number 3 <psp>
[ 1.347318] [drm] add ip block number 4 <smu>
[ 1.347318] [drm] add ip block number 5 <dm>
[ 1.347318] [drm] add ip block number 6 <gfx_v10_0>
[ 1.347319] [drm] add ip block number 7 <sdma_v5_0>
[ 1.347319] [drm] add ip block number 8 <vcn_v2_0>
[ 1.347320] [drm] add ip block number 9 <jpeg_v2_0>
[ 1.347327] amdgpu 0000:03:00.0: firmware: failed to load amdgpu/navi14_gpu_info.bin (-2)
[ 1.347329] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 1.347330] amdgpu 0000:03:00.0: Direct firmware load for amdgpu/navi14_gpu_info.bin failed with error -2
[ 1.347331] amdgpu 0000:03:00.0: Failed to load gpu_info firmware "amdgpu/navi14_gpu_info.bin"
[ 1.347332] amdgpu 0000:03:00.0: Fatal error during GPU init
[ 1.347333] [drm] amdgpu: finishing device.
[ 1.347447] amdgpu: probe of 0000:03:00.0 failed with error -2
[ 1.458778] nvme nvme0: missing or invalid SUBNQN field.
[ 1.458852] nvme nvme0: Shutdown timeout set to 8 seconds
[ 1.471248] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 1.473544] nvme nvme0: 6/0/0 default/read/poll queues
[ 1.483257] nvme0n1: p1 p2 p3 p4
[ 1.542383] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 0c:9d:92:c2:be:b4
[ 1.542387] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 1.542497] e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF
[ 1.544572] e1000e 0000:00:1f.6 eno1: renamed from eth0
[ 1.566791] usb 2-9: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1.617166] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.617229] ata2: SATA link down (SStatus 4 SControl 300)
[ 1.617283] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.617320] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.617387] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.617447] ata5: SATA link down (SStatus 4 SControl 300)
[ 1.617599] ata1.00: supports DRM functions and may not be fully accessible
[ 1.618089] ata6.00: ATA-9: WDC WD20EZRZ-00Z5HB0, 80.00A80, max UDMA/133
[ 1.618093] ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.618191] ata3.00: ATA-9: WDC WD20EZRZ-22Z5HB0, 80.00A80, max UDMA/133
[ 1.618195] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.618215] ata4.00: ATA-9: WDC WD30EFRX-68EUZN0, 80.00A80, max UDMA/133
[ 1.618220] ata4.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.618574] ata1.00: ATA-10: Crucial_CT275MX300SSD1, M0CR060, max UDMA/133
[ 1.618579] ata1.00: 537234768 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.618824] ata6.00: configured for UDMA/133
[ 1.619138] ata3.00: configured for UDMA/133
[ 1.619166] ata4.00: configured for UDMA/133
[ 1.621271] ata1.00: supports DRM functions and may not be fully accessible
[ 1.624560] ata1.00: configured for UDMA/133
[ 1.624785] scsi 0:0:0:0: Direct-Access ATA Crucial_CT275MX3 R060 PQ: 0 ANSI: 5
[ 1.625450] scsi 2:0:0:0: Direct-Access ATA WDC WD20EZRZ-22Z 0A80 PQ: 0 ANSI: 5
[ 1.626010] scsi 3:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A80 PQ: 0 ANSI: 5
[ 1.626596] scsi 5:0:0:0: Direct-Access ATA WDC WD20EZRZ-00Z 0A80 PQ: 0 ANSI: 5
[ 1.638598] ata1.00: Enabling discard_zeroes_data
[ 1.638689] sd 0:0:0:0: [sda] 537234768 512-byte logical blocks: (275 GB/256 GiB)
[ 1.638705] sd 0:0:0:0: [sda] Write Protect is off
[ 1.638708] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.638713] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.638714] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[ 1.638738] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.638742] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.638749] sd 3:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 1.638751] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.638755] sd 5:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.638760] sd 3:0:0:0: [sdc] 4096-byte physical blocks
[ 1.638762] sd 5:0:0:0: [sdd] 4096-byte physical blocks
[ 1.638770] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.638780] sd 5:0:0:0: [sdd] Write Protect is off
[ 1.638784] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.638785] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.638789] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.638817] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.638824] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.678440] ata1.00: Enabling discard_zeroes_data
[ 1.680526] sda: sda1 sda2
[ 1.681264] ata1.00: Enabling discard_zeroes_data
[ 1.681631] sd 0:0:0:0: [sda] supports TCG Opal
[ 1.681634] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.684797] usb 2-9: New USB device found, idVendor=11b0, idProduct=6348, bcdDevice= 1.31
[ 1.684801] usb 2-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.684804] usb 2-9: Product: USB3.0 Media Reader
[ 1.684807] usb 2-9: Manufacturer: Kingston
[ 1.684810] usb 2-9: SerialNumber: 08735330901194
[ 1.703551] sdc: sdc1 sdc3 sdc4 sdc5
[ 1.704670] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.706167] usb-storage 2-9:1.0: USB Mass Storage device detected
[ 1.706681] scsi host6: usb-storage 2-9:1.0
[ 1.706858] usbcore: registered new interface driver usb-storage
[ 1.711018] usbcore: registered new interface driver uas
[ 1.721936] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[ 1.723022] sdd: sdd1 sdd2 sdd3
[ 1.723870] sd 5:0:0:0: [sdd] Attached SCSI disk
[ 1.749317] usb 1-3: New USB device found, idVendor=2109, idProduct=2812, bcdDevice= b.e0
[ 1.749322] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.749325] usb 1-3: Product: USB2.0 Hub
[ 1.749328] usb 1-3: Manufacturer: VIA Labs, Inc.
[ 1.750220] hub 1-3:1.0: USB hub found
[ 1.750582] hub 1-3:1.0: 4 ports detected
[ 1.769431] sdb: sdb1 sdb2 sdb3
[ 1.770376] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.885910] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[ 1.907959] usb 1-6: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
[ 1.907963] usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.907967] usb 1-6: Product: USB2.0 Hub
[ 1.909046] hub 1-6:1.0: USB hub found
[ 1.909398] hub 1-6:1.0: 4 ports detected
[ 1.931225] md/raid1:md11: active with 2 out of 2 mirrors
[ 1.987561] md11: detected capacity change from 0 to 1636247273472
[ 1.994964] md/raid1:md13: active with 2 out of 2 mirrors
[ 1.994998] md13: detected capacity change from 0 to 5363466240
[ 2.023261] md/raid1:md12: active with 2 out of 2 mirrors
[ 2.023295] md12: detected capacity change from 0 to 5363466240
[ 2.034140] usb 2-3: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[ 2.061947] tsc: Refined TSC clocksource calibration: 3695.998 MHz
[ 2.061960] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a8d2284b57, max_idle_ns: 881590451434 ns
[ 2.062018] clocksource: Switched to clocksource tsc
[ 2.287150] usb 2-3: New USB device found, idVendor=2109, idProduct=0812, bcdDevice= b.e1
[ 2.287155] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.287158] usb 2-3: Product: USB3.0 Hub
[ 2.287161] usb 2-3: Manufacturer: VIA Labs, Inc.
[ 2.289665] hub 2-3:1.0: USB hub found
[ 2.290056] hub 2-3:1.0: 4 ports detected
[ 2.365952] usb 1-6.3: new full-speed USB device number 4 using xhci_hcd
[ 2.472238] usb 1-6.3: New USB device found, idVendor=046d, idProduct=c068, bcdDevice=58.02
[ 2.472243] usb 1-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.472246] usb 1-6.3: Product: G500
[ 2.472249] usb 1-6.3: Manufacturer: Logitech
[ 2.472252] usb 1-6.3: SerialNumber: F99CF762760018
[ 2.486594] hid: raw HID events driver (C) Jiri Kosina
[ 2.493934] usbcore: registered new interface driver usbhid
[ 2.493935] usbhid: USB HID core driver
[ 2.494972] input: Logitech G500 as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.3/1-6.3:1.0/0003:046D:C068.0001/input/input4
[ 2.495012] hid-generic 0003:046D:C068.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:14.0-6.3/input0
[ 2.495108] input: Logitech G500 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.3/1-6.3:1.1/0003:046D:C068.0002/input/input5
[ 2.554034] input: Logitech G500 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.3/1-6.3:1.1/0003:046D:C068.0002/input/input6
[ 2.554442] hid-generic 0003:046D:C068.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:14.0-6.3/input1
[ 2.557935] usb 1-6.4: new high-speed USB device number 5 using xhci_hcd
[ 2.721279] usb 1-6.4: New USB device found, idVendor=046d, idProduct=0802, bcdDevice= 0.09
[ 2.721280] usb 1-6.4: New USB device strings: Mfr=0, Product=0, SerialNumber=2
[ 2.721281] usb 1-6.4: SerialNumber: DE7A0D50
[ 2.733893] raid6: avx2x4 gen() 52531 MB/s
[ 2.801891] raid6: avx2x4 xor() 24403 MB/s
[ 2.869886] raid6: avx2x2 gen() 53680 MB/s
[ 2.937898] raid6: avx2x2 xor() 30599 MB/s
[ 3.005885] raid6: avx2x1 gen() 44818 MB/s
[ 3.073886] raid6: avx2x1 xor() 24322 MB/s
[ 3.141895] raid6: sse2x4 gen() 21450 MB/s
[ 3.209896] raid6: sse2x4 xor() 12019 MB/s
[ 3.277885] raid6: sse2x2 gen() 22053 MB/s
[ 3.345898] raid6: sse2x2 xor() 13265 MB/s
[ 3.413885] raid6: sse2x1 gen() 18312 MB/s
[ 3.481896] raid6: sse2x1 xor() 9060 MB/s
[ 3.481896] raid6: using algorithm avx2x2 gen() 53680 MB/s
[ 3.481896] raid6: .... xor() 30599 MB/s, rmw enabled
[ 3.481897] raid6: using avx2x2 recovery algorithm
[ 3.482445] xor: automatically using best checksumming function avx
[ 3.482812] async_tx: api initialized (async)
[ 3.497290] scsi 6:0:0:0: Direct-Access FCR-HS3 -0 1.00 PQ: 0 ANSI: 6
[ 3.511675] scsi 6:0:0:1: Direct-Access FCR-HS3 -1 1.00 PQ: 0 ANSI: 6
[ 3.517823] process '/usr/bin/fstype' started with executable stack
[ 3.525884] scsi 6:0:0:2: Direct-Access FCR-HS3 -2 1.00 PQ: 0 ANSI: 6
[ 3.540268] scsi 6:0:0:3: Direct-Access FCR-HS3 -3 1.00 PQ: 0 ANSI: 6
[ 3.581567] sd 6:0:0:3: [sdh] Attached SCSI removable disk
[ 3.581653] EXT4-fs (nvme0n1p4): mounted filesystem with ordered data mode. Opts: (null)
[ 3.590441] sd 6:0:0:2: [sdg] Attached SCSI removable disk
[ 3.596220] sd 6:0:0:1: [sdf] Attached SCSI removable disk
[ 3.605655] sd 6:0:0:0: [sde] Attached SCSI removable disk
[ 3.609953] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 3.652656] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[ 3.660035] systemd[1]: Inserted module 'autofs4'
[ 3.775531] systemd[1]: systemd 245.5-2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 3.794051] systemd[1]: Detected architecture x86-64.
[ 3.815014] systemd[1]: Set hostname to <fisso2018-nvme-deb10-201912>.
[ 3.916326] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 3.950223] systemd[1]: Created slice Virtual Machine and Container Slice.
[ 3.950419] systemd[1]: Created slice system-getty.slice.
[ 3.950512] systemd[1]: Created slice system-modprobe.slice.
[ 3.950630] systemd[1]: Created slice Cryptsetup Units Slice.
[ 3.950727] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.950815] systemd[1]: Created slice User and Session Slice.
[ 3.950843] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.950923] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.950954] systemd[1]: Reached target User and Group Name Lookups.
[ 3.950963] systemd[1]: Reached target Slices.
[ 3.950973] systemd[1]: Reached target Libvirt guests shutdown.
[ 3.951004] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.951051] systemd[1]: Listening on LVM2 poll daemon socket.
[ 3.952817] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 3.953336] systemd[1]: Listening on Syslog Socket.
[ 3.953391] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 3.953418] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 3.953498] systemd[1]: Listening on Journal Audit Socket.
[ 3.953541] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.953590] systemd[1]: Listening on Journal Socket.
[ 3.953638] systemd[1]: Listening on udev Control Socket.
[ 3.953672] systemd[1]: Listening on udev Kernel Socket.
[ 3.954060] systemd[1]: Mounting Huge Pages File System...
[ 3.954479] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.954913] systemd[1]: Mounting RPC Pipe File System...
[ 3.955347] systemd[1]: Mounting Kernel Debug File System...
[ 3.955771] systemd[1]: Mounting Kernel Trace File System...
[ 3.955821] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 3.956206] systemd[1]: Starting Availability of block devices...
[ 3.956723] systemd[1]: Starting Set the console keyboard layout...
[ 3.957138] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 3.957516] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 3.957535] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[ 3.958251] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 3.958269] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 3.959089] systemd[1]: Starting Journal Service...
[ 3.959721] systemd[1]: Starting Load Kernel Modules...
[ 3.960109] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.960494] systemd[1]: Starting udev Coldplug all Devices...
[ 3.961255] systemd[1]: Mounted Huge Pages File System.
[ 3.961370] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.961458] systemd[1]: Mounted Kernel Debug File System.
[ 3.961542] systemd[1]: Mounted Kernel Trace File System.
[ 3.961794] systemd[1]: Finished Availability of block devices.
[ 3.962075] systemd[1]: Finished Set the console keyboard layout.
[ 3.962320] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 3.973259] EXT4-fs (nvme0n1p4): re-mounted. Opts: errors=remount-ro
[ 3.975814] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 3.976138] RPC: Registered named UNIX socket transport module.
[ 3.976139] RPC: Registered udp transport module.
[ 3.976139] RPC: Registered tcp transport module.
[ 3.976139] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.976690] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 3.976712] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 3.977077] systemd[1]: Starting Load/Save Random Seed...
[ 3.977826] systemd[1]: Starting Create System Users...
[ 3.979120] systemd[1]: Mounted RPC Pipe File System.
[ 3.979175] lp: driver loaded but no devices found
[ 3.980657] ppdev: user-space parallel port driver
[ 3.984963] systemd[1]: Finished Load Kernel Modules.
[ 3.985089] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[ 3.985125] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
[ 3.985487] systemd[1]: Starting Apply Kernel Variables...
[ 3.990677] systemd[1]: Finished Create System Users.
[ 3.991116] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 3.992862] systemd[1]: Finished Apply Kernel Variables.
[ 3.996800] systemd[1]: Finished Load/Save Random Seed.
[ 4.000124] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 4.000660] systemd[1]: Starting udev Kernel Device Manager...
[ 4.018890] systemd[1]: Finished udev Coldplug all Devices.
[ 4.019454] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[ 4.021452] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
[ 4.042819] systemd[1]: Started udev Kernel Device Manager.
[ 4.043241] systemd[1]: Starting Show Plymouth Boot Screen...
[ 4.058726] systemd[1]: Started Show Plymouth Boot Screen.
[ 4.058812] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
[ 4.058865] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
[ 4.106134] EDAC ie31200: No ECC support
[ 4.107828] mc: Linux media interface: v0.10
[ 4.107846] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.108321] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 4.108360] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 4.108377] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 4.108390] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 4.108403] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 4.108413] sd 6:0:0:1: Attached scsi generic sg5 type 0
[ 4.108424] sd 6:0:0:2: Attached scsi generic sg6 type 0
[ 4.108435] sd 6:0:0:3: Attached scsi generic sg7 type 0
[ 4.118091] videodev: Linux video capture interface: v2.00
[ 4.139853] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 4.139934] systemd[1]: Reached target Local File Systems (Pre).
[ 4.139953] systemd[1]: Condition check resulted in Virtual Machine and Container Storage (Compatibility) being skipped.
[ 4.139961] systemd[1]: Reached target Containers.
[ 4.177007] systemd[1]: Found device Samsung SSD 970 EVO 250GB UEFI.
[ 4.179348] systemd[1]: Starting File System Check on /dev/disk/by-uuid/1DE6-9C6E...
[ 4.184363] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 4.185436] snd_hda_intel 0000:03:00.1: enabling device (0000 -> 0002)
[ 4.185516] snd_hda_intel 0000:03:00.1: Force to non-snoop mode
[ 4.191236] systemd[1]: Found device Crucial_CT275MX300SSD1 HOME-SDA.
[ 4.191681] systemd[1]: Starting File System Check on /dev/disk/by-uuid/a73f1362-9567-431d-b0c7-006b3918b71d...
[ 4.199084] systemd[1]: Found device Crucial_CT275MX300SSD1 SSD-SDA_SWAP.
[ 4.200679] systemd[1]: Activating swap /dev/disk/by-uuid/785fc9cc-ac78-4ee0-81ee-7d954c878dda...
[ 4.223191] systemd[1]: Found device Samsung SSD 970 EVO 250GB NVME-KUB1904HOME.
[ 4.228066] systemd[1]: Found device WDC_WD30EFRX-68EUZN0 3T-ARCHIVIO-TUX2.
[ 4.236112] systemd[1]: Starting File System Check on /dev/disk/by-uuid/44564e3f-1a03-474a-9d77-c88eece83f3d...
[ 4.236495] systemd[1]: Starting File System Check on /dev/disk/by-uuid/7d32adba-3681-4562-9a02-f3b4c665326d...
[ 4.236872] systemd[1]: Started File System Check Daemon to report status.
[ 4.245941] Adding 19922940k swap on /dev/sda2. Priority:-2 extents:1 across:19922940k SSFS
[ 4.248092] systemd[1]: Activated swap /dev/disk/by-uuid/785fc9cc-ac78-4ee0-81ee-7d954c878dda.
[ 4.248131] systemd[1]: Reached target Swap.
[ 4.254534] systemd[1]: Finished File System Check on /dev/disk/by-uuid/1DE6-9C6E.
[ 4.255111] systemd[1]: Mounting /boot/efi...
[ 4.260579] systemd[1]: Finished File System Check on /dev/disk/by-uuid/a73f1362-9567-431d-b0c7-006b3918b71d.
[ 4.261133] systemd[1]: Mounting /mnt/home2/sda...
[ 4.263697] EFI Variables Facility v0.08 2004-May-17
[ 4.264802] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card2/input9
[ 4.264833] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card2/input10
[ 4.264871] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card2/input11
[ 4.264903] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card2/input12
[ 4.264923] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card2/input13
[ 4.265169] iTCO_vendor_support: vendor-support=0
[ 4.265656] systemd[1]: Finished File System Check on /dev/disk/by-uuid/7d32adba-3681-4562-9a02-f3b4c665326d.
[ 4.266104] input: PC Speaker as /devices/platform/pcspkr/input/input14
[ 4.267000] systemd[1]: Mounting /home...
[ 4.267371] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[ 4.267371] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 4.267372] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 4.267372] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 4.273212] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.273818] EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null)
[ 4.274596] systemd[1]: Started Journal Service.
[ 4.284932] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.285030] iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[ 4.285645] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.288825] systemd-journald[411]: Received client request to flush runtime journal.
[ 4.291039] systemd-journald[411]: File /var/log/journal/589cba18c2614a09af62166273c12999/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 4.294309] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 4.294310] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.294310] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 4.294311] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 4.294311] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 4.294312] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 4.294312] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 4.294313] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 4.294313] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 4.326305] asus_wmi: ASUS WMI generic driver loaded
[ 4.326845] asus_wmi: Initialization: 0x0
[ 4.326859] asus_wmi: BIOS WMI version: 0.9
[ 4.326911] asus_wmi: SFUN value: 0x0
[ 4.326913] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[ 4.327090] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input15
[ 4.328261] pstore: Using crash dump compression: deflate
[ 4.328270] pstore: Registered efi as persistent store backend
[ 4.347590] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 4.347614] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 4.347675] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 4.347697] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 4.347716] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[ 4.347749] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[ 4.347772] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[ 4.398197] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.436091] device-mapper: uevent: version 1.0.3
[ 4.436158] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[ 4.451549] usb 1-6.4: Warning! Unlikely big volume range (=6144), cval->res is probably wrong.
[ 4.451550] usb 1-6.4: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7680/1
[ 4.451736] usbcore: registered new interface driver snd-usb-audio
[ 4.451750] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0802)
[ 4.495695] uvcvideo 1-6.4:1.0: Entity type for entity Extension 4 was not initialized!
[ 4.495696] uvcvideo 1-6.4:1.0: Entity type for entity Extension 8 was not initialized!
[ 4.495697] uvcvideo 1-6.4:1.0: Entity type for entity Extension 10 was not initialized!
[ 4.495697] uvcvideo 1-6.4:1.0: Entity type for entity Extension 12 was not initialized!
[ 4.495698] uvcvideo 1-6.4:1.0: Entity type for entity Extension 11 was not initialized!
[ 4.495698] uvcvideo 1-6.4:1.0: Entity type for entity Processing 2 was not initialized!
[ 4.495699] uvcvideo 1-6.4:1.0: Entity type for entity Extension 13 was not initialized!
[ 4.495700] uvcvideo 1-6.4:1.0: Entity type for entity Camera 1 was not initialized!
[ 4.495700] uvcvideo 1-6.4:1.0: Entity type for entity Extension 14 was not initialized!
[ 4.495788] input: UVC Camera (046d:0802) as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.4/1-6.4:1.0/input/input23
[ 4.495883] usbcore: registered new interface driver uvcvideo
[ 4.495883] USB Video Class driver (1.1.1)
[ 4.564056] intel_rapl_common: Found RAPL domain package
[ 4.564057] intel_rapl_common: Found RAPL domain core
[ 4.564058] intel_rapl_common: Found RAPL domain dram
[ 8.642896] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 8.669919] audit: type=1400 audit(1588860408.084:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=682 comm="apparmor_parser"
[ 8.670296] audit: type=1400 audit(1588860408.084:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=686 comm="apparmor_parser"
[ 8.671069] audit: type=1400 audit(1588860408.084:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirtd" pid=684 comm="apparmor_parser"
[ 8.671071] audit: type=1400 audit(1588860408.084:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirtd//qemu_bridge_helper" pid=684 comm="apparmor_parser"
[ 8.671853] audit: type=1400 audit(1588860408.084:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="mysqld_akonadi" pid=683 comm="apparmor_parser"
[ 8.672695] audit: type=1400 audit(1588860408.084:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="postgresql_akonadi" pid=692 comm="apparmor_parser"
[ 8.673308] audit: type=1400 audit(1588860408.084:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=690 comm="apparmor_parser"
[ 8.674008] audit: type=1400 audit(1588860408.088:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="virt-aa-helper" pid=689 comm="apparmor_parser"
[ 8.674169] audit: type=1400 audit(1588860408.088:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=694 comm="apparmor_parser"
[ 8.674221] audit: type=1400 audit(1588860408.088:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=693 comm="apparmor_parser"
[ 14.323024] e1000e 0000:00:1f.6 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 14.323171] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 14.398984] FS-Cache: Loaded
[ 14.438149] FS-Cache: Netfs 'nfs' registered for caching
[ 14.438492] nfs: Deprecated parameter 'intr'
[ 14.438495] nfs: Deprecated parameter 'intr'
[ 14.440337] Key type dns_resolver registered
[ 14.533350] NFS: Registering the id_resolver key type
[ 14.533354] Key type id_resolver registered
[ 14.533355] Key type id_legacy registered
[ 14.553593] NFS4: Couldn't follow remote path
[ 14.553626] nfs: Deprecated parameter 'intr'
[ 14.553628] nfs: Deprecated parameter 'intr'
[ 14.563945] NFS4: Couldn't follow remote path
[ 14.564054] nfs: Deprecated parameter 'intr'
[ 14.564064] nfs: Deprecated parameter 'intr'
[ 14.574329] NFS4: Couldn't follow remote path
[ 14.686180] nfs: Deprecated parameter 'intr'
[ 14.686192] nfs: Deprecated parameter 'intr'
[ 101.010820] usb 1-6.4: reset high-speed USB device number 5 using xhci_hcd
Reply to: