[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: stranezza con debian streatch e testing (futura buster stable)



Il led del router relativo al cablaggio cl pc e' accesa e pure quella della scheda di rete. Il default gw lo imposto manualmente (se via dhcp non ottengo nulla). Cio' nonosante pingando il router
continuo a ricevere risposta scaduta. Queste sono le rotte.
ernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
default         192.168.1.1     0.0.0.0         UG    100    0        0 enp3s0
localnet        0.0.0.0         255.255.255.0   U     100    0        0 enp3s0

Allego all'email il dmesg di una debian streatch funzionante per maggiori dettagli.


Il giorno 14 maggio 2018 20:04, Davide Prina <davide.prina@gmail.com> ha scritto:
On 14/05/2018 19:33, marco pirola wrote:
Se invece tento un'installazione pulita utilizzando la firmware-9.4.0-amd64-netinst.iso 1 volta su 40 volte riesco ad ottenere dal router l'indirizzo ip dinamico.

ma è impostato il default gateway, route cosa dice?

Inoltre, quando non funziona controlla se la lucina della scheda di rete lampeggia o meno. Se non lampeggia potrebbe essere che per qualche motivo è stata disabilitata/spenta la scheda di rete.

Ciao
Davide

PS: se vuoi installare Buster puoi anche partire con l'installer di Buster

--
Dizionari: http://linguistico.sourceforge.net/wiki
I didn't use Microsoft machines when I was in my operational phase, because I couldn't trust them.
Not because I knew that there was a particular back door or anything like that, but because I couldn't be sure.
Edward Snowden


[    0.000000] Linux version 4.9.0-6-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.88-1+deb9u1 (2018-05-07)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-6-amd64 root=UUID=23e5054f-382a-48c4-9165-757127d0c4cf ro quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000caa7ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000caa80000-0x00000000caa86fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000caa87000-0x00000000caf1afff] usable
[    0.000000] BIOS-e820: [mem 0x00000000caf1b000-0x00000000cb42bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cb42c000-0x00000000dd648fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dd649000-0x00000000dd6d4fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dd6d5000-0x00000000dd6edfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dd6ee000-0x00000000ddc26fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ddc27000-0x00000000deffefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS All Series/H81M-C, BIOS 3602 03/26/2018
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7E00000000 write-back
[    0.000000]   1 base 0200000000 mask 7FF0000000 write-back
[    0.000000]   2 base 0210000000 mask 7FF8000000 write-back
[    0.000000]   3 base 0218000000 mask 7FFC000000 write-back
[    0.000000]   4 base 021C000000 mask 7FFE000000 write-back
[    0.000000]   5 base 021E000000 mask 7FFF000000 write-back
[    0.000000]   6 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [ffff9bf8800fd770]
[    0.000000] Base memory trampoline at [ffff9bf880097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x102939000, 0x102939fff] PGTABLE
[    0.000000] BRK [0x10293a000, 0x10293afff] PGTABLE
[    0.000000] BRK [0x10293b000, 0x10293bfff] PGTABLE
[    0.000000] BRK [0x10293c000, 0x10293cfff] PGTABLE
[    0.000000] BRK [0x10293d000, 0x10293dfff] PGTABLE
[    0.000000] BRK [0x10293e000, 0x10293efff] PGTABLE
[    0.000000] BRK [0x10293f000, 0x10293ffff] PGTABLE
[    0.000000] BRK [0x102940000, 0x102940fff] PGTABLE
[    0.000000] BRK [0x102941000, 0x102941fff] PGTABLE
[    0.000000] BRK [0x102942000, 0x102942fff] PGTABLE
[    0.000000] BRK [0x102943000, 0x102943fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35ccd000-0x36e5dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000DD6DA088 000084 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DD6E8B78 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000DD6DA1A0 00E9D6 (v02 ALASKA A M I    00000031 INTL 20091112)
[    0.000000] ACPI: FACS 0x00000000DDC25080 000040
[    0.000000] ACPI: APIC 0x00000000DD6E8C88 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DD6E8D00 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: LPIT 0x00000000DD6E8D48 00005C (v01 ALASKA A M I    00000000 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000DD6E8DA8 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000DD6E92E8 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20091112)
[    0.000000] ACPI: MCFG 0x00000000DD6E9DC0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DD6E9E00 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000DD6E9E38 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000DD6EA1A8 0034E1 (v01 SaSsdt SaSsdt   00003000 INTL 20091112)
[    0.000000] ACPI: DMAR 0x00000000DD6ED720 000080 (v01 INTEL  HSW      00000001 INTL 00000001)
[    0.000000] ACPI: BGRT 0x00000000DD6ED6E8 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x21effb000-0x21effffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000021effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000caa7ffff]
[    0.000000]   node   0: [mem 0x00000000caa87000-0x00000000caf1afff]
[    0.000000]   node   0: [mem 0x00000000cb42c000-0x00000000dd648fff]
[    0.000000]   node   0: [mem 0x00000000defff000-0x00000000deffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000021effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
[    0.000000] On node 0 totalpages: 2080974
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14085 pages used for memmap
[    0.000000]   DMA32 zone: 901426 pages, LIFO batch:31
[    0.000000]   Normal zone: 18368 pages used for memmap
[    0.000000]   Normal zone: 1175552 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcaa80000-0xcaa86fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcaf1b000-0xcb42bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xdd649000-0xdd6d4fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdd6d5000-0xdd6edfff]
[    0.000000] PM: Registered nosave memory: [mem 0xdd6ee000-0xddc26fff]
[    0.000000] PM: Registered nosave memory: [mem 0xddc27000-0xdeffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff9bfa9ec00000 s105304 r8192 d29864 u524288
[    0.000000] pcpu-alloc: s105304 r8192 d29864 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2048436
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-6-amd64 root=UUID=23e5054f-382a-48c4-9165-757127d0c4cf ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8092520K/8323896K available (6240K kernel code, 1159K rwdata, 2868K rodata, 1416K init, 688K bss, 231376K reserved, 0K cma-reserved)
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3491.978 MHz processor
[    0.000016] Calibrating delay loop (skipped), value calculated using timer frequency.. 6983.95 BogoMIPS (lpj=13967912)
[    0.000017] pid_max: default: 32768 minimum: 301
[    0.000027] ACPI: Core revision 20160831
[    0.007211] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.007241] Security Framework initialized
[    0.007242] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.007245] AppArmor: AppArmor disabled by boot time parameter
[    0.007506] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.008526] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.008983] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.008988] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.009178] CPU: Physical Processor ID: 0
[    0.009178] CPU: Processor Core ID: 0
[    0.009181] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.009181] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.009184] mce: CPU supports 9 MCE banks
[    0.009191] CPU0: Thermal monitoring enabled (TM1)
[    0.009201] process: using mwait in idle threads
[    0.009203] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.009204] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.009204] Spectre V2 : Mitigation: Full generic retpoline
[    0.009205] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.009205] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.009501] Freeing SMP alternatives memory: 24K
[    0.011121] ftrace: allocating 25239 entries in 99 pages
[    0.025842] smpboot: Max logical packages: 1
[    0.025844] DMAR: Host address width 39
[    0.025845] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[    0.025851] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.025852] DMAR: RMRR base: 0x000000dee79000 end: 0x000000dee87fff
[    0.025854] DMAR-IR: IOAPIC id 8 under DRHD base  0xfed90000 IOMMU 0
[    0.025854] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[    0.025855] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.025992] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.025993] x2apic enabled
[    0.025997] Switched APIC routing to cluster x2apic.
[    0.026395] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.066082] TSC deadline timer enabled
[    0.066084] smpboot: CPU0: Intel(R) Core(TM) i5-4690 CPU @ 3.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.066087] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.066122] ... version:                3
[    0.066123] ... bit width:              48
[    0.066123] ... generic registers:      8
[    0.066123] ... value mask:             0000ffffffffffff
[    0.066124] ... max period:             00007fffffffffff
[    0.066124] ... fixed-purpose events:   3
[    0.066124] ... event mask:             00000007000000ff
[    0.066498] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.066569] x86: Booting SMP configuration:
[    0.066569] .... node  #0, CPUs:      #1 #2 #3
[    0.073573] x86: Booted up 1 node, 4 CPUs
[    0.073575] smpboot: Total of 4 processors activated (27935.82 BogoMIPS)
[    0.076013] devtmpfs: initialized
[    0.076057] x86/mm: Memory block size: 128MB
[    0.077571] PM: Registering ACPI NVS region [mem 0xcaa80000-0xcaa86fff] (28672 bytes)
[    0.077572] PM: Registering ACPI NVS region [mem 0xdd6ee000-0xddc26fff] (5476352 bytes)
[    0.077701] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.077706] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.077734] pinctrl core: initialized pinctrl subsystem
[    0.077810] NET: Registered protocol family 16
[    0.091823] cpuidle: using governor ladder
[    0.111837] cpuidle: using governor menu
[    0.111851] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.111851] ACPI: bus type PCI registered
[    0.111852] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.111896] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.111897] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.111902] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[    0.111943] PCI: Using configuration type 1 for base access
[    0.112008] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.112039] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.124986] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.124987] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.125137] ACPI: Added _OSI(Module Device)
[    0.125138] ACPI: Added _OSI(Processor Device)
[    0.125138] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.125138] ACPI: Added _OSI(Processor Aggregator Device)
[    0.125282] ACPI: Executed 1 blocks of module-level executable AML code
[    0.128533] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.129123] ACPI: Dynamic OEM Table Load:
[    0.129127] ACPI: SSDT 0xFFFF9BFA94D56800 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20091112)
[    0.129434] ACPI: Dynamic OEM Table Load:
[    0.129437] ACPI: SSDT 0xFFFF9BFA94E26800 0005AA (v01 PmRef  ApIst    00003000 INTL 20091112)
[    0.129740] ACPI: Dynamic OEM Table Load:
[    0.129742] ACPI: SSDT 0xFFFF9BFA94FC4800 000119 (v01 PmRef  ApCst    00003000 INTL 20091112)
[    0.130620] ACPI: Interpreter enabled
[    0.130642] ACPI: (supports S0 S3 S4 S5)
[    0.130643] ACPI: Using IOAPIC for interrupt routing
[    0.130661] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.137578] ACPI: Power Resource [FN00] (off)
[    0.137636] ACPI: Power Resource [FN01] (off)
[    0.137691] ACPI: Power Resource [FN02] (off)
[    0.137746] ACPI: Power Resource [FN03] (off)
[    0.137800] ACPI: Power Resource [FN04] (off)
[    0.138419] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.138422] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.138593] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.138698] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.138699] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.138987] PCI host bridge to bus 0000:00
[    0.138988] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.138989] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.138990] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.138991] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.138992] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.138993] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.138994] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.138995] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.138996] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.138997] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[    0.138998] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.139003] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[    0.139068] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    0.139093] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.139157] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.139202] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.139216] pci 0000:00:14.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit]
[    0.139267] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.139296] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.139325] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.139340] pci 0000:00:16.0: reg 0x10: [mem 0xf721a000-0xf721a00f 64bit]
[    0.139394] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.139454] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.139469] pci 0000:00:1a.0: reg 0x10: [mem 0xf7218000-0xf72183ff]
[    0.139540] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.139579] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.139609] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.139622] pci 0000:00:1b.0: reg 0x10: [mem 0xf7210000-0xf7213fff 64bit]
[    0.139680] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.139712] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.139739] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.139793] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.139853] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.139882] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[    0.139936] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.139994] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.140026] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.140041] pci 0000:00:1d.0: reg 0x10: [mem 0xf7217000-0xf72173ff]
[    0.140113] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.140152] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.140182] pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100
[    0.140320] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[    0.140330] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
[    0.140336] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
[    0.140342] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
[    0.140348] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
[    0.140354] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.140360] pci 0000:00:1f.2: reg 0x24: [mem 0xf7216000-0xf72167ff]
[    0.140388] pci 0000:00:1f.2: PME# supported from D3hot
[    0.140440] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.140452] pci 0000:00:1f.3: reg 0x10: [mem 0xf7215000-0xf72150ff 64bit]
[    0.140469] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.140561] pci 0000:01:00.0: [10de:1c81] type 00 class 0x030000
[    0.140571] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.140580] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.140589] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.140595] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.140601] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.140662] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.140691] pci 0000:01:00.1: [10de:0fb9] type 00 class 0x040300
[    0.140700] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[    0.155886] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.155887] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.155889] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.155891] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.155939] acpiphp: Slot [1] registered
[    0.155943] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.156004] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.156021] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.156046] pci 0000:03:00.0: reg 0x18: [mem 0xf7100000-0xf7100fff 64bit]
[    0.156062] pci 0000:03:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[    0.156148] pci 0000:03:00.0: supports D1 D2
[    0.156149] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.156189] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.167899] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.167901] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.167904] pci 0000:00:1c.2:   bridge window [mem 0xf7100000-0xf71fffff]
[    0.167908] pci 0000:00:1c.2:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.168481] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.168515] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.168547] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[    0.168580] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.168612] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.168644] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.168677] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[    0.168709] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.168930] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.168994] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.168995] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.168995] vgaarb: loaded
[    0.168996] vgaarb: bridge control possible 0000:01:00.0
[    0.169036] PCI: Using ACPI for IRQ routing
[    0.170272] PCI: pci_cache_line_size set to 64 bytes
[    0.170302] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.170303] e820: reserve RAM buffer [mem 0xcaa80000-0xcbffffff]
[    0.170304] e820: reserve RAM buffer [mem 0xcaf1b000-0xcbffffff]
[    0.170304] e820: reserve RAM buffer [mem 0xdd649000-0xdfffffff]
[    0.170305] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[    0.170306] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[    0.170399] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.170402] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.172414] clocksource: Switched to clocksource hpet
[    0.176686] VFS: Disk quotas dquot_6.6.0
[    0.176699] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.176748] pnp: PnP ACPI init
[    0.176802] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.176804] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.176923] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.176924] system 00:01: [io  0xffff] has been reserved
[    0.176925] system 00:01: [io  0xffff] has been reserved
[    0.176927] system 00:01: [io  0xffff] has been reserved
[    0.176928] system 00:01: [io  0x1c00-0x1cfe] has been reserved
[    0.176929] system 00:01: [io  0x1d00-0x1dfe] has been reserved
[    0.176930] system 00:01: [io  0x1e00-0x1efe] has been reserved
[    0.176931] system 00:01: [io  0x1f00-0x1ffe] has been reserved
[    0.176932] system 00:01: [io  0x1800-0x18fe] has been reserved
[    0.176933] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.176935] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.176950] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.176982] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.176983] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.177057] system 00:04: [io  0x0a00-0x0a1f] has been reserved
[    0.177058] system 00:04: [io  0x0290-0x029f] has been reserved
[    0.177059] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.177088] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.177257] pnp 00:06: [dma 0 disabled]
[    0.177318] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.177351] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.177352] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.177473] pnp 00:08: [dma 0 disabled]
[    0.177505] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.177786] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.177787] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.177788] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.177789] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.177790] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.177791] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.177792] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.177793] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.177794] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[    0.177796] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.177797] system 00:09: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[    0.177798] system 00:09: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.177799] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.177948] pnp: PnP ACPI: found 10 devices
[    0.183576] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.183587] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.183589] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.183590] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.183598] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.183599] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.183600] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.183601] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.183602] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.183603] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.183607] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf2200000-0xf23fffff]
[    0.183611] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf2400000-0xf25fffff 64bit pref]
[    0.183613] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.183614] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.183615] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.183617] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.183619] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.183621] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.183623] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.183626] pci 0000:00:1c.0:   bridge window [mem 0xf2200000-0xf23fffff]
[    0.183629] pci 0000:00:1c.0:   bridge window [mem 0xf2400000-0xf25fffff 64bit pref]
[    0.183633] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.183635] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.183638] pci 0000:00:1c.2:   bridge window [mem 0xf7100000-0xf71fffff]
[    0.183640] pci 0000:00:1c.2:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.183645] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.183645] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.183646] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.183647] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.183648] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.183649] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.183650] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.183650] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.183651] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.183652] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
[    0.183653] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.183654] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.183655] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.183656] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.183656] pci_bus 0000:02: resource 1 [mem 0xf2200000-0xf23fffff]
[    0.183657] pci_bus 0000:02: resource 2 [mem 0xf2400000-0xf25fffff 64bit pref]
[    0.183658] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.183659] pci_bus 0000:03: resource 1 [mem 0xf7100000-0xf71fffff]
[    0.183660] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.183737] NET: Registered protocol family 2
[    0.183844] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.183920] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.184025] TCP: Hash tables configured (established 65536 bind 65536)
[    0.184039] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.184056] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.184096] NET: Registered protocol family 1
[    0.232494] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.232502] PCI: CLS 64 bytes, default 64
[    0.232529] Unpacking initramfs...
[    0.439562] Freeing initrd memory: 17988K
[    0.439621] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.439622] software IO TLB [mem 0xd9649000-0xdd649000] (64MB) mapped at [ffff9bf959649000-ffff9bf95d648fff]
[    0.439850] audit: initializing netlink subsys (disabled)
[    0.439862] audit: type=2000 audit(1526328875.436:1): initialized
[    0.440123] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    0.440152] zbud: loaded
[    0.440686] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.440701] io scheduler noop registered
[    0.440701] io scheduler deadline registered
[    0.440708] io scheduler cfq registered (default)
[    0.441026] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.441029] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.441040] intel_idle: MWAIT substates: 0x42120
[    0.441041] intel_idle: v0.4.1 model 0x3C
[    0.441142] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.441230] GHES: HEST is not enabled!
[    0.441269] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.461739] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.462060] Linux agpgart interface v0.103
[    0.462104] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.462105] AMD IOMMUv2 functionality not available on this system
[    0.462343] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.462344] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.462974] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.463070] mousedev: PS/2 mouse device common for all mice
[    0.463096] rtc_cmos 00:02: RTC can wake from S4
[    0.463212] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.463235] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.463241] intel_pstate: Intel P-state driver initializing
[    0.463478] ledtrig-cpu: registered to indicate activity on CPUs
[    0.464726] NET: Registered protocol family 10
[    0.465243] mip6: Mobile IPv6
[    0.465246] NET: Registered protocol family 17
[    0.465251] mpls_gso: MPLS GSO support
[    0.465716] microcode: sig=0x306c3, pf=0x2, revision=0x24
[    0.465921] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.466227] registered taskstats version 1
[    0.466263] zswap: loaded using pool lzo/zbud
[    0.466599] ima: No TPM chip found, activating TPM-bypass!
[    0.467456] rtc_cmos 00:02: setting system clock to 2018-05-14 20:14:35 UTC (1526328875)
[    0.467622] PM: Hibernation image not present or could not be loaded.
[    0.470563] Freeing unused kernel memory: 1416K
[    0.470565] Write protecting the kernel read-only data: 12288k
[    0.471706] Freeing unused kernel memory: 1936K
[    0.478615] Freeing unused kernel memory: 1228K
[    0.485589] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.491496] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.510711] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.510789] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.510799] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.511761] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.511794] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.512818] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.512835] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.513128] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.513186] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.513242] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.539459] thermal LNXTHERM:00: registered as thermal_zone0
[    0.539460] ACPI: Thermal Zone [TZ00] (28 C)
[    0.540052] thermal LNXTHERM:01: registered as thermal_zone1
[    0.540054] ACPI: Thermal Zone [TZ01] (30 C)
[    0.542478] ACPI: bus type USB registered
[    0.542496] usbcore: registered new interface driver usbfs
[    0.542505] usbcore: registered new interface driver hub
[    0.542518] usbcore: registered new device driver usb
[    0.542591] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.542933] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.543102] ehci-pci: EHCI PCI platform driver
[    0.543341] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.543347] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.543649] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.543655] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.543666] ehci-pci 0000:00:1a.0: debug port 2
[    0.547465] SCSI subsystem initialized
[    0.547572] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.547591] ehci-pci 0000:00:1a.0: irq 20, io mem 0xf7218000
[    0.549165] libata version 3.00 loaded.
[    0.553327] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffa8bdc0c81000, 78:24:af:40:17:ea, XID 0c000800 IRQ 26
[    0.553329] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.558549] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    0.558562] AVX2 version of gcm_enc/dec engaged.
[    0.558563] AES CTR mode by8 optimization enabled
[    0.560470] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.560503] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.560505] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.560506] usb usb1: Product: EHCI Host Controller
[    0.560507] usb usb1: Manufacturer: Linux 4.9.0-6-amd64 ehci_hcd
[    0.560508] usb usb1: SerialNumber: 0000:00:1a.0
[    0.560622] hub 1-0:1.0: USB hub found
[    0.560627] hub 1-0:1.0: 2 ports detected
[    0.560855] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.560859] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.560869] ehci-pci 0000:00:1d.0: debug port 2
[    0.564754] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.564770] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7217000
[    0.584449] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.584483] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.584484] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.584485] usb usb2: Product: EHCI Host Controller
[    0.584486] usb usb2: Manufacturer: Linux 4.9.0-6-amd64 ehci_hcd
[    0.584487] usb usb2: SerialNumber: 0000:00:1d.0
[    0.584660] hub 2-0:1.0: USB hub found
[    0.584664] hub 2-0:1.0: 2 ports detected
[    0.584878] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.584881] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.585950] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    0.585954] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.586282] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.586283] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.586285] usb usb3: Product: xHCI Host Controller
[    0.586286] usb usb3: Manufacturer: Linux 4.9.0-6-amd64 xhci-hcd
[    0.586287] usb usb3: SerialNumber: 0000:00:14.0
[    0.586501] hub 3-0:1.0: USB hub found
[    0.586526] hub 3-0:1.0: 10 ports detected
[    0.587635] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.587638] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.587731] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.587733] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.587734] usb usb4: Product: xHCI Host Controller
[    0.587734] usb usb4: Manufacturer: Linux 4.9.0-6-amd64 xhci-hcd
[    0.587735] usb usb4: SerialNumber: 0000:00:14.0
[    0.587823] hub 4-0:1.0: USB hub found
[    0.587830] hub 4-0:1.0: 2 ports detected
[    0.587981] ahci 0000:00:1f.2: version 3.0
[    0.588103] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x23 impl SATA mode
[    0.588105] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems 
[    0.612914] scsi host0: ahci
[    0.613032] scsi host1: ahci
[    0.613216] scsi host2: ahci
[    0.613316] scsi host3: ahci
[    0.613399] scsi host4: ahci
[    0.613459] scsi host5: ahci
[    0.613490] ata1: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216100 irq 28
[    0.613491] ata2: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216180 irq 28
[    0.613492] ata3: DUMMY
[    0.613492] ata4: DUMMY
[    0.613493] ata5: DUMMY
[    0.613494] ata6: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216380 irq 28
[    0.888466] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.912445] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.912467] usb 3-2: new full-speed USB device number 2 using xhci_hcd
[    0.927792] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.927816] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.927840] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.928996] ata2.00: ATA-8: ST500DM002-1BD142, HP73, max UDMA/100
[    0.929000] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    0.929465] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    0.929639] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff9bfa961eb0c8), AE_NOT_FOUND (20160831/psparse-543)
[    0.929937] ata6.00: supports DRM functions and may not be fully accessible
[    0.930397] ata2.00: configured for UDMA/100
[    0.930566] ata1.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB01, max UDMA/100
[    0.930835] ata6.00: ATA-9: Samsung SSD 750 EVO 500GB, MAT01B6Q, max UDMA/133
[    0.930839] ata6.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    0.931600] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    0.931772] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff9bfa961eb0c8), AE_NOT_FOUND (20160831/psparse-543)
[    0.932076] ata6.00: supports DRM functions and may not be fully accessible
[    0.933324] ata6.00: configured for UDMA/133
[    0.933533] ata1.00: configured for UDMA/100
[    0.935153] scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-224DB  SB01 PQ: 0 ANSI: 5
[    0.945906] scsi 1:0:0:0: Direct-Access     ATA      ST500DM002-1BD14 HP73 PQ: 0 ANSI: 5
[    0.985288] scsi 5:0:0:0: Direct-Access     ATA      Samsung SSD 750  1B6Q PQ: 0 ANSI: 5
[    1.020967] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.020970] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    1.021005] sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.021088] sd 5:0:0:0: [sdb] Write Protect is off
[    1.021092] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.021132] sd 1:0:0:0: [sda] Write Protect is off
[    1.021135] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.021147] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.021186] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.023738]  sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
[    1.024284] sd 5:0:0:0: [sdb] Attached SCSI disk
[    1.035187] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.035188] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.035361] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.036760] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    1.036763] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.037052] hub 1-1:1.0: USB hub found
[    1.037133] hub 1-1:1.0: 4 ports detected
[    1.037220]  sda: sda1
[    1.037975] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.060746] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    1.060748] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.060901] hub 2-1:1.0: USB hub found
[    1.060993] hub 2-1:1.0: 6 ports detected
[    1.149017] random: fast init done
[    1.267965] PM: Starting manual resume from disk
[    1.267967] PM: Hibernation image partition 8:22 present
[    1.267967] PM: Looking for hibernation image.
[    1.268125] PM: Image not found (code -22)
[    1.268125] PM: Hibernation image not present or could not be loaded.
[    1.289117] usb 3-2: New USB device found, idVendor=0a12, idProduct=0001
[    1.289118] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    1.289120] usb 3-2: Product: Bluetooth2.1+EDR CLASS1
[    1.354716] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[    1.408441] usb 3-9: new low-speed USB device number 3 using xhci_hcd
[    1.424778] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[    1.441105] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.446541] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    1.446644] systemd[1]: Detected architecture x86-64.
[    1.446817] systemd[1]: Set hostname to <desktop>.
[    1.468400] tsc: Refined TSC clocksource calibration: 3491.914 MHz
[    1.468404] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32557ae966b, max_idle_ns: 440795369289 ns
[    1.489174] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.489223] systemd[1]: Listening on fsck to fsckd communication Socket.
[    1.489330] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    1.489366] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    1.489422] systemd[1]: Listening on Journal Audit Socket.
[    1.489511] systemd[1]: Created slice System Slice.
[    1.489790] systemd[1]: Mounting Debug File System...
[    1.500740] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
[    1.507831] lp: driver loaded but no devices found
[    1.509082] ppdev: user-space parallel port driver
[    1.510213] parport_pc 00:06: reported by Plug and Play ACPI
[    1.510272] parport0: PC-style at 0x378, irq 5 [PCSPP]
[    1.546149] systemd-journald[229]: Received request to flush runtime journal from PID 1
[    1.551562] usb 3-9: New USB device found, idVendor=093a, idProduct=2510
[    1.551563] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.551564] usb 3-9: Product: USB Optical Mouse
[    1.551565] usb 3-9: Manufacturer: PixArt
[    1.580902] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.580905] ACPI: Power Button [PWRB]
[    1.580940] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.580941] ACPI: Power Button [PWRF]
[    1.604610] lp0: using parport0 (interrupt-driven).
[    1.656707] wmi: Mapper loaded
[    1.656929] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.657324] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.657345] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.657363] sd 5:0:0:0: Attached scsi generic sg2 type 0
[    1.658758] input: PC Speaker as /devices/platform/pcspkr/input/input3
[    1.659083] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    1.659083] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    1.659084] RAPL PMU: hw unit of domain package 2^-14 Joules
[    1.659084] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    1.659085] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    1.673252] usb 3-10: new full-speed USB device number 4 using xhci_hcd
[    1.673375] [drm] Initialized
[    1.673713] snd_hda_intel 0000:01:00.1: Disabling MSI
[    1.673716] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    1.688906] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    1.688908] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    1.688909] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    1.688909] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    1.688910] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    1.688911] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    1.688912] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    1.688913] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    1.695645] nouveau 0000:01:00.0: unknown chipset (137000a1)
[    1.695685] nouveau: probe of 0000:01:00.0 failed with error -12
[    1.702926] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[    1.703004] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[    1.703039] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    1.703196] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    1.703295] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    1.708187] asus_wmi: ASUS WMI generic driver loaded
[    1.708623] asus_wmi: Initialization: 0x0
[    1.708639] asus_wmi: BIOS WMI version: 0.9
[    1.708664] asus_wmi: SFUN value: 0x0
[    1.708891] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input9
[    1.709525] asus_wmi: Number of fans: 1
[    1.716051] iTCO_vendor_support: vendor-support=0
[    1.718171] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    1.718200] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[    1.718264] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    1.748456] Adding 6697980k swap on /dev/sdb6.  Priority:-1 extents:1 across:6697980k SSFS
[    1.751468] intel_rapl: Found RAPL domain package
[    1.751470] intel_rapl: Found RAPL domain core
[    1.751472] intel_rapl: Found RAPL domain dram
[    1.815381] usb 3-10: New USB device found, idVendor=28de, idProduct=1142
[    1.815383] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.815384] usb 3-10: Product: Steam Controller
[    1.815384] usb 3-10: Manufacturer: Valve Software
[    1.830100] hidraw: raw HID events driver (C) Jiri Kosina
[    1.832225] Bluetooth: Core ver 2.22
[    1.832231] NET: Registered protocol family 31
[    1.832232] Bluetooth: HCI device and connection manager initialized
[    1.832234] Bluetooth: HCI socket layer initialized
[    1.832235] Bluetooth: L2CAP socket layer initialized
[    1.832238] Bluetooth: SCO socket layer initialized
[    1.834616] usbcore: registered new interface driver btusb
[    1.838247] usbcore: registered new interface driver usbhid
[    1.838248] usbhid: USB HID core driver
[    1.839393] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/0003:093A:2510.0001/input/input10
[    1.839467] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-9/input0
[    1.839561] input: Valve Software Steam Controller as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/0003:28DE:1142.0002/input/input11
[    1.896560] hid-generic 0003:28DE:1142.0002: input,hidraw1: USB HID v1.11 Keyboard [Valve Software Steam Controller] on usb-0000:00:14.0-10/input0
[    1.897558] hid-generic 0003:28DE:1142.0003: hiddev0,hidraw2: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-10/input1
[    1.898682] hid-generic 0003:28DE:1142.0004: hiddev0,hidraw3: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-10/input2
[    1.901012] hid-generic 0003:28DE:1142.0005: hiddev0,hidraw4: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-10/input3
[    1.902132] hid-generic 0003:28DE:1142.0006: hiddev0,hidraw5: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-10/input4
[    2.081217] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.081218] Bluetooth: BNEP filters: protocol multicast
[    2.081220] Bluetooth: BNEP socket layer initialized
[    2.227740] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    2.230457] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-2.fw
[    2.278924] r8169 0000:03:00.0 enp3s0: link down
[    2.278926] r8169 0000:03:00.0 enp3s0: link down
[    2.278972] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    2.492608] clocksource: Switched to clocksource tsc
[    2.508725] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[    2.508763] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[    2.508888] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[    3.908486] r8169 0000:03:00.0 enp3s0: link up
[    3.908493] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[    6.545368] random: crng init done
[  141.320496] Bluetooth: RFCOMM TTY layer initialized
[  141.320501] Bluetooth: RFCOMM socket layer initialized
[  141.320504] Bluetooth: RFCOMM ver 1.11

Reply to: