Re: lentezza apertura programmi
Il 20/02/2012 20:08, Davide Prina ha scritto:
però dovresti eseguire tutti i test prima di indicarne i risultati.
Questo per esempio non lo hai mai eseguito
[...]
Ciao
Davide
stamattina ho avuto un po' di tempo e questi sono i risultati (spero di
aver fatto tutto correttamente)
Debian-Aspire5930G:/home/bellonio# smartctl --test=long /dev/sda
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-1-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately
in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in
off-line mode" successful.
Testing has begun.
Please wait 110 minutes for test to complete.
Test will complete after Sat Feb 25 12:39:30 2012
Use smartctl -X to abort test.
Debian-Aspire5930G:/home/bellonio# smartctl -a /dev/sda
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-1-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 7200.4
Device Model: ST9500420ASG
Serial Number: 5VJ0Q2QM
LU WWN Device Id: 5 000c50 018f0269c
Firmware Version: 0002SDM1
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sat Feb 25 13:06:20 2012 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 110) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail
Always - 161985442
3 Spin_Up_Time 0x0003 098 096 085 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 098 098 020 Old_age
Always - 2112
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail
Always - 1
7 Seek_Error_Rate 0x000f 065 059 030 Pre-fail
Always - 94565228583
9 Power_On_Hours 0x0032 094 094 000 Old_age
Always - 5420
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 098 037 020 Old_age
Always - 2089
184 End-to-End_Error 0x0032 100 100 099 Old_age
Always - 0
187 Reported_Uncorrect 0x0032 099 099 000 Old_age
Always - 1
188 Command_Timeout 0x0032 100 098 000 Old_age
Always - 87
189 High_Fly_Writes 0x003a 100 100 000 Old_age
Always - 0
190 Airflow_Temperature_Cel 0x0022 059 028 045 Old_age
Always In_the_past 41 (52 166 46 20)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age
Always - 4
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age
Always - 355
193 Load_Cycle_Count 0x0032 015 015 000 Old_age
Always - 170671
194 Temperature_Celsius 0x0022 041 072 000 Old_age
Always - 41 (Min/Max 0/62260)
195 Hardware_ECC_Recovered 0x001a 036 027 000 Old_age
Always - 161985442
197 Current_Pending_Sector 0x0012 100 100 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age
Offline - 220078419219394
241 Total_LBAs_Written 0x0000 100 253 000 Old_age
Offline - 3332150671
242 Total_LBAs_Read 0x0000 100 253 000 Old_age
Offline - 1602184381
254 Free_Fall_Sensor 0x0032 001 001 000 Old_age
Always - 195
SMART Error Log Version: 1
ATA Error Count: 1
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 occurred at disk power-on lifetime: 5149 hours (214 days + 13 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 87 a4 98 01 Error: UNC at LBA = 0x0198a487 = 26780807
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 40 4d 2c 43 41 00 01:22:55.578 READ FPDMA QUEUED
60 00 60 5b a4 98 41 00 01:22:55.576 READ FPDMA QUEUED
60 00 a0 bb a3 98 41 00 01:22:55.572 READ FPDMA QUEUED
60 00 98 a3 a0 98 41 00 01:22:55.571 READ FPDMA QUEUED
60 00 b8 eb 9f 98 41 00 01:22:55.570 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00%
5419 -
# 2 Short offline Completed without error 00%
5391 -
# 3 Extended offline Completed without error 00%
5390 -
# 4 Extended offline Completed without error 00%
4398 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Giovanni
--
________________________________
Giovanni Bellonio
Reply to: