Re: R: Collegare due pc con cavo ethernet incrociato
"Premoli, Roberto" <roberto.premoli@pfizer.com> writes:
> Prova cosi':
>
>
> auto eth0
> allow-hotplug eth0
> iface eth0 inet static
> address 192.168.0.1
> netmask 255.255.255.0
Fatto.
> Poi dai
> /etc/init.d/networking restart
# /etc/init.d/networking restart
Reconfiguring network interfaces...done.
> E poi vedi se la rete e' attiva tramite
>
> Ifconfig
# ifconfig
eth0 Link encap:UNSPEC HWaddr 00-03-0D-53-25-5C-86-16-00-00-00-00-00-00-00-00
inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
ppp0 Link encap:Point-to-Point Protocol
inet addr:151.82.172.123 P-t-P:10.64.64.64 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:1080 errors:23 dropped:0 overruns:0 frame:0
TX packets:988 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:998947 (975.5 KiB) TX bytes:169372 (165.4 KiB)
Non so decifrare: com'è la situazione?
Rodolfo
Reply to: