[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: problemi impianto audio laptop



Manlio Perillo wrote:
> lspci riporta:
> Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller
> (rev 01)
> 
> alsa riporta:
> SigmaTel STAC9200
> 
> 
> Il modello dell'INSPIRON è 6400.

Ciao, l'INSPIRON 6400 è equivalente all'INSPIRON E1505

qui <http://linux.dell.com/wiki/index.php/Ubuntu_7.04>

c'è scritto:

> Inspiron E1505n notebook (sold as Inspiron 6400n in Europe)

la n finale dovrebbe significare che è stato venduto con Ubuntu

qui
<http://linux.dell.com/wiki/index.php/Clients/Products/Inspiron_1505n/lspci>

si vede che l'audio e lo stesso del tuo:

> Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)


in HD-Audio-Models.txt (link nell'altro post) c'è:

> STAC9200
> ========
>   ref		Reference board
>   oqo		OQO Model 2
>   dell-d21	Dell (unknown)
>   dell-d22	Dell (unknown)
>   dell-d23	Dell (unknown)
>   dell-m21	Dell Inspiron 630m, Dell Inspiron 640m
>   dell-m22	Dell Latitude D620, Dell Latitude D820
>   dell-m23	Dell XPS M1710, Dell Precision M90
>   dell-m24	Dell Latitude 120L
>   dell-m25	Dell Inspiron E1505n
>   dell-m26	Dell Inspiron 1501
>   dell-m27	Dell Inspiron E1705/9400
>   gateway-m4	Gateway laptops with EAPD control
>   gateway-m4-2	Gateway laptops with EAPD control
>   panasonic	Panasonic CF-74
>   auto		BIOS setup (default)

quindi potresti provare ad impostare il modello a "dell-m25".

guarda anche in ALSA-Configuration.txt, c'è una parte all'interno di
"Module snd-hda-intel" che dice:

>     Note 2: If you get click noises on output, try the module option
> 	    position_fix=1 or 2.  position_fix=1 will use the SD_LPIB
> 	    register value without FIFO size correction as the current
> 	    DMA pointer.  position_fix=2 will make the driver to use
> 	    the position buffer instead of reading SD_LPIB register.
> 	    (Usually SD_LPIB register is more accurate than the
> 	    position buffer.)
> 

spero che tra "model" e "position_fix" tu possa risolvere, anche perché
non ho più idee ;)


Reply to: