Problema dischi USB
Salve a tutti,
ho un problema con gli hard disk esterni USB e con gli adattatori PATA-> USB e SATA->USB
Ho una Asus Cusl2 con un P3-
733 (ma il problema ce l'ho anche su una vecchia Epox (K6-300) e su una Asus k7v)
Ho installato debian stable:
Linux
version 2.6.26-2-686 (Debian 2.6.26-15lenny3) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu May
28 15:39:35 UTC 2009
Ovvero:
quando collego il dispositivo (in quest'ultimo tentativo ho provato una docking station USB) la periferica
viene rilevata (sembrerebbe mappata in /dev/sdg) ma l'HD comincia a fare un rumore strano, come se le testine si muovessero all'impazzata
da una parte all'altra (ho abbastanza esperienza in HW e il rumore non mi dice nulla di buono).
Dopo un po' il rumore finisce ma cercando
di montare il disco (/dev/sdg1) mount torna un errore di I/O error.
Guardando /var/log/syslog (che allego) noto questo errore ripetuto
piu' volte:
Jun 22 16:38:48 FileServer kernel: [ 369.893781] usb 1-2.4: reset full speed USB device using uhci_hcd
and address 13
Oltre a svariati errori in hdc
Jun 22 16:37:15 FileServer kernel: [ 276.453438] hdc:
task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Jun 22 16:37:15 FileServer kernel: [ 276.453438]
hdc: task_no_data_intr: error=0x04 { DriveStatusError }
Jun 22 16:37:15 FileServer kernel: [ 276.453438] ide: failed
opcode was: 0xef
ma questo è un altro mistero.
Devo far notare che le memorie USB (pendrive) funzionano bene.
Puo' essere un problema di
compatibilità USB2.0 <--> USB1.1? ovvero il dispositivo non è compatibile USB1.1? (Da lo stesso errore usando un HD Western Digital My
Passport da 2.5'' 500Gb)
Non mi pare che la Asus CUSL2 abbia USB2.0 ... o almeno non sembra visto che il device usa UHCI
lspci dice
questo:
00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82815 815 Chipset AGP Bridge (rev 02)
00:1e.0 PCI bridge:
Intel Corporation 82801 PCI Bridge (rev 01)
00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 Controller (rev 01)
00:1f.2 USB
Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 01)
00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus
Controller (rev 01)
00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 01)
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G100 [Productiva] AGP (rev 01)
02:0b.0
RAID bus controller: Silicon Image, Inc. SiI 3512 [SATALink/SATARaid] Serial ATA Controller (rev 01)
02:0d.0 Ethernet
controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Ho provato a cercare su google, l'unico consiglio utile
suggerisce di rimuovere il modulo usb_storage (rmmod) e poi ricaricarlo, ma non ho ancora provato.
Qualcuno ha esperienze
positive/negative?
Grazie
Davide
Con Tutto Incluso chiami e navighi senza limiti a soli 14,95 euro al mese. Gratis la Sim Tiscali Mobile con 50 euro di traffico! L’offerta è valida solo se attivi entro il 25/06/09 http://abbonati.tiscali.it/promo/tuttoincluso/
Jun 22 16:34:21 FileServer kernel: [ 102.572043] usb 1-1: new full speed USB device using uhci_hcd and address 3
Jun 22 16:34:21 FileServer kernel: [ 103.092036] usb 1-1: device not accepting address 3, error -71
Jun 22 16:34:22 FileServer kernel: [ 103.148067] hub 1-0:1.0: unable to enumerate USB device on port 1
Jun 22 16:34:28 FileServer kernel: [ 109.432042] usb 2-2: new full speed USB device using uhci_hcd and address 2
Jun 22 16:34:28 FileServer kernel: [ 109.588013] usb 2-2: configuration #1 chosen from 1 choice
Jun 22 16:34:28 FileServer kernel: [ 109.598362] scsi3 : SCSI emulation for USB Mass Storage devices
Jun 22 16:34:28 FileServer kernel: [ 109.603009] usb 2-2: New USB device found, idVendor=0457, idProduct=0151
Jun 22 16:34:28 FileServer kernel: [ 109.603075] usb 2-2: New USB device strings: Mfr=0, Product=2, SerialNumber=3
Jun 22 16:34:28 FileServer kernel: [ 109.603123] usb 2-2: Product: USB Mass Storage Device
Jun 22 16:34:28 FileServer kernel: [ 109.603165] usb 2-2: SerialNumber: 0000000000002C
Jun 22 16:34:28 FileServer kernel: [ 109.608167] usb-storage: device found at 2
Jun 22 16:34:28 FileServer kernel: [ 109.608187] usb-storage: waiting for device to settle before scanning
Jun 22 16:34:33 FileServer kernel: [ 114.610114] usb-storage: device scan complete
Jun 22 16:34:33 FileServer kernel: [ 114.613090] scsi 3:0:0:0: Direct-Access DIKOM USB Flash Drive 0.00 PQ: 0 ANSI: 2
Jun 22 16:34:33 FileServer kernel: [ 114.619095] sd 3:0:0:0: [sda] 1967616 512-byte hardware sectors (1007 MB)
Jun 22 16:34:33 FileServer kernel: [ 114.622090] sd 3:0:0:0: [sda] Write Protect is off
Jun 22 16:34:33 FileServer kernel: [ 114.622157] sd 3:0:0:0: [sda] Mode Sense: 00 00 00 00
Jun 22 16:34:33 FileServer kernel: [ 114.622165] sd 3:0:0:0: [sda] Assuming drive cache: write through
Jun 22 16:34:33 FileServer kernel: [ 114.630028] sd 3:0:0:0: [sda] 1967616 512-byte hardware sectors (1007 MB)
Jun 22 16:34:33 FileServer kernel: [ 114.633039] sd 3:0:0:0: [sda] Write Protect is off
Jun 22 16:34:33 FileServer kernel: [ 114.633098] sd 3:0:0:0: [sda] Mode Sense: 00 00 00 00
Jun 22 16:34:33 FileServer kernel: [ 114.633106] sd 3:0:0:0: [sda] Assuming drive cache: write through
Jun 22 16:34:33 FileServer kernel: [ 114.633166] sda: sda1
Jun 22 16:34:33 FileServer kernel: [ 114.667439] sd 3:0:0:0: [sda] Attached SCSI removable disk
Jun 22 16:34:35 FileServer kernel: [ 116.396190] hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Jun 22 16:34:35 FileServer kernel: [ 116.396190] hdc: task_no_data_intr: error=0x04 { DriveStatusError }
Jun 22 16:34:35 FileServer kernel: [ 116.396190] ide: failed opcode was: 0xef
Jun 22 16:34:52 FileServer kernel: [ 133.932042] usb 1-2: new full speed USB device using uhci_hcd and address 5
Jun 22 16:34:52 FileServer kernel: [ 134.084012] usb 1-2: configuration #1 chosen from 1 choice
Jun 22 16:34:52 FileServer kernel: [ 134.098142] hub 1-2:1.0: USB hub found
Jun 22 16:34:52 FileServer kernel: [ 134.103225] hub 1-2:1.0: 4 ports detected
Jun 22 16:34:53 FileServer kernel: [ 134.220371] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
Jun 22 16:34:53 FileServer kernel: [ 134.220433] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jun 22 16:34:53 FileServer kernel: [ 134.220480] usb 1-2: Product: USB2.0 Hub
Jun 22 16:34:53 FileServer kernel: [ 134.425931] usb 1-2.3: new full speed USB device using uhci_hcd and address 6
Jun 22 16:34:53 FileServer kernel: [ 134.536011] usb 1-2.3: configuration #1 chosen from 1 choice
Jun 22 16:34:53 FileServer kernel: [ 134.553305] scsi4 : SCSI emulation for USB Mass Storage devices
Jun 22 16:34:53 FileServer kernel: [ 134.555742] usb 1-2.3: New USB device found, idVendor=05e3, idProduct=0716
Jun 22 16:34:53 FileServer kernel: [ 134.555807] usb 1-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=2
Jun 22 16:34:53 FileServer kernel: [ 134.555861] usb 1-2.3: Product: USB Storage
Jun 22 16:34:53 FileServer kernel: [ 134.555900] usb 1-2.3: SerialNumber: 000000009727
Jun 22 16:34:53 FileServer kernel: [ 134.557955] usb-storage: device found at 6
Jun 22 16:34:53 FileServer kernel: [ 134.557972] usb-storage: waiting for device to settle before scanning
Jun 22 16:34:54 FileServer kernel: [ 135.965626] usb 1-2.4: new full speed USB device using uhci_hcd and address 7
Jun 22 16:34:54 FileServer kernel: [ 136.072011] usb 1-2.4: configuration #1 chosen from 1 choice
Jun 22 16:34:54 FileServer kernel: [ 136.096578] scsi5 : SCSI emulation for USB Mass Storage devices
Jun 22 16:34:54 FileServer kernel: [ 136.102980] usb-storage: device found at 7
Jun 22 16:34:54 FileServer kernel: [ 136.102995] usb-storage: waiting for device to settle before scanning
Jun 22 16:34:54 FileServer kernel: [ 136.106009] usb 1-2.4: New USB device found, idVendor=1bcf, idProduct=0c31
Jun 22 16:34:54 FileServer kernel: [ 136.106078] usb 1-2.4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
Jun 22 16:34:54 FileServer kernel: [ 136.106135] usb 1-2.4: Product: USB to Serial-ATA bridge
Jun 22 16:34:54 FileServer kernel: [ 136.106179] usb 1-2.4: Manufacturer: Sunplus Innovation Technology.
Jun 22 16:34:54 FileServer kernel: [ 136.106226] usb 1-2.4: SerialNumber: 012345678901
Jun 22 16:34:58 FileServer kernel: [ 139.558024] usb-storage: device scan complete
Jun 22 16:34:58 FileServer kernel: [ 139.560059] scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE-A 9727 PQ: 0 ANSI: 0
Jun 22 16:34:58 FileServer kernel: [ 139.561036] scsi 4:0:0:1: Direct-Access Generic STORAGE DEVICE-A 9727 PQ: 0 ANSI: 0
Jun 22 16:34:58 FileServer kernel: [ 139.561036] scsi 4:0:0:2: Direct-Access Generic STORAGE DEVICE-A 9727 PQ: 0 ANSI: 0
Jun 22 16:34:58 FileServer kernel: [ 139.570979] scsi 4:0:0:3: Direct-Access Generic STORAGE DEVICE-A 9727 PQ: 0 ANSI: 0 CCS
Jun 22 16:34:58 FileServer kernel: [ 139.572882] scsi 4:0:0:4: Direct-Access Generic STORAGE DEVICE-A 9727 PQ: 0 ANSI: 0
Jun 22 16:34:58 FileServer kernel: [ 139.580318] sd 4:0:0:0: [sdb] Attached SCSI removable disk
Jun 22 16:34:58 FileServer kernel: [ 139.586237] sd 4:0:0:1: [sdc] Attached SCSI removable disk
Jun 22 16:34:58 FileServer kernel: [ 139.591198] sd 4:0:0:2: [sdd] Attached SCSI removable disk
Jun 22 16:34:58 FileServer kernel: [ 139.596282] sd 4:0:0:3: [sde] Attached SCSI removable disk
Jun 22 16:34:58 FileServer kernel: [ 139.601215] sd 4:0:0:4: [sdf] Attached SCSI removable disk
Jun 22 16:34:59 FileServer kernel: [ 141.101730] usb-storage: device scan complete
Jun 22 16:34:59 FileServer kernel: [ 141.104597] scsi 5:0:0:0: Direct-Access SPIF301 USB2SATA Bridge 0108 PQ: 0 ANSI: 2
Jun 22 16:35:00 FileServer kernel: [ 141.150903] sd 5:0:0:0: [sdg] Attached SCSI removable disk
Jun 22 16:35:00 FileServer kernel: [ 142.126891] hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Jun 22 16:35:00 FileServer kernel: [ 142.126891] hdc: task_no_data_intr: error=0x04 { DriveStatusError }
Jun 22 16:35:00 FileServer kernel: [ 142.126891] ide: failed opcode was: 0xef
Jun 22 16:35:01 FileServer kernel: [ 142.882455] hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Jun 22 16:35:01 FileServer kernel: [ 142.882455] hdc: task_no_data_intr: error=0x04 { DriveStatusError }
Jun 22 16:35:01 FileServer kernel: [ 142.882455] ide: failed opcode was: 0xef
Jun 22 16:35:01 FileServer kernel: [ 143.087055] hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Jun 22 16:35:01 FileServer kernel: [ 143.087055] hdc: task_no_data_intr: error=0x04 { DriveStatusError }
Jun 22 16:35:01 FileServer kernel: [ 143.087055] ide: failed opcode was: 0xef
Jun 22 16:35:02 FileServer kernel: [ 143.343778] hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Jun 22 16:35:02 FileServer kernel: [ 143.343933] hdc: task_no_data_intr: error=0x04 { DriveStatusError }
Jun 22 16:35:02 FileServer kernel: [ 143.344010] ide: failed opcode was: 0xef
Jun 22 16:35:02 FileServer kernel: [ 143.496092] hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Jun 22 16:35:02 FileServer kernel: [ 143.496246] hdc: task_no_data_intr: error=0x04 { DriveStatusError }
Jun 22 16:35:02 FileServer kernel: [ 143.496374] ide: failed opcode was: 0xef
Jun 22 16:35:02 FileServer kernel: [ 143.652836] hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Jun 22 16:35:02 FileServer kernel: [ 143.652836] hdc: task_no_data_intr: error=0x04 { DriveStatusError }
Jun 22 16:35:02 FileServer kernel: [ 143.652836] ide: failed opcode was: 0xef
Jun 22 16:35:40 FileServer kernel: [ 181.936097] usb 1-2: USB disconnect, address 5
Jun 22 16:35:40 FileServer kernel: [ 181.936155] usb 1-2.3: USB disconnect, address 6
Jun 22 16:35:40 FileServer kernel: [ 181.939053] usb 1-2.4: USB disconnect, address 7
Jun 22 16:36:11 FileServer kernel: [ 213.104042] usb 1-2: new full speed USB device using uhci_hcd and address 8
Jun 22 16:36:12 FileServer kernel: [ 213.252012] usb 1-2: configuration #1 chosen from 1 choice
Jun 22 16:36:12 FileServer kernel: [ 213.271138] hub 1-2:1.0: USB hub found
Jun 22 16:36:12 FileServer kernel: [ 213.273027] hub 1-2:1.0: 4 ports detected
Jun 22 16:36:12 FileServer kernel: [ 213.380381] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
Jun 22 16:36:12 FileServer kernel: [ 213.380442] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jun 22 16:36:12 FileServer kernel: [ 213.380489] usb 1-2: Product: USB2.0 Hub
Jun 22 16:36:12 FileServer kernel: [ 213.589933] usb 1-2.3: new full speed USB device using uhci_hcd and address 9
Jun 22 16:36:12 FileServer kernel: [ 213.700012] usb 1-2.3: configuration #1 chosen from 1 choice
Jun 22 16:36:12 FileServer kernel: [ 213.718291] scsi6 : SCSI emulation for USB Mass Storage devices
Jun 22 16:36:12 FileServer kernel: [ 213.724568] usb 1-2.3: New USB device found, idVendor=05e3, idProduct=0716
Jun 22 16:36:12 FileServer kernel: [ 213.724632] usb 1-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=2
Jun 22 16:36:12 FileServer kernel: [ 213.724685] usb 1-2.3: Product: USB Storage
Jun 22 16:36:12 FileServer kernel: [ 213.724724] usb 1-2.3: SerialNumber: 000000009727
Jun 22 16:36:12 FileServer kernel: [ 213.725753] usb-storage: device found at 9
Jun 22 16:36:12 FileServer kernel: [ 213.725767] usb-storage: waiting for device to settle before scanning
Jun 22 16:36:17 FileServer kernel: [ 218.726024] usb-storage: device scan complete
Jun 22 16:36:17 FileServer kernel: [ 218.729003] scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE-A 9727 PQ: 0 ANSI: 0
Jun 22 16:36:17 FileServer kernel: [ 218.731991] scsi 6:0:0:1: Direct-Access Generic STORAGE DEVICE-A 9727 PQ: 0 ANSI: 0
Jun 22 16:36:17 FileServer kernel: [ 218.734971] scsi 6:0:0:2: Direct-Access Generic STORAGE DEVICE-A 9727 PQ: 0 ANSI: 0
Jun 22 16:36:17 FileServer kernel: [ 218.738034] scsi 6:0:0:3: Direct-Access Generic STORAGE DEVICE-A 9727 PQ: 0 ANSI: 0 CCS
Jun 22 16:36:17 FileServer kernel: [ 218.740936] scsi 6:0:0:4: Direct-Access Generic STORAGE DEVICE-A 9727 PQ: 0 ANSI: 0
Jun 22 16:36:17 FileServer kernel: [ 218.747263] sd 6:0:0:0: [sdb] Attached SCSI removable disk
Jun 22 16:36:17 FileServer kernel: [ 218.753229] sd 6:0:0:1: [sdc] Attached SCSI removable disk
Jun 22 16:36:17 FileServer kernel: [ 218.759693] sd 6:0:0:2: [sdd] Attached SCSI removable disk
Jun 22 16:36:17 FileServer kernel: [ 218.765232] sd 6:0:0:3: [sde] Attached SCSI removable disk
Jun 22 16:36:17 FileServer kernel: [ 218.770239] sd 6:0:0:4: [sdf] Attached SCSI removable disk
Jun 22 16:36:19 FileServer kernel: [ 221.002035] usb 1-2.4: new full speed USB device using uhci_hcd and address 10
Jun 22 16:36:20 FileServer kernel: [ 221.068661] hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Jun 22 16:36:20 FileServer kernel: [ 221.068823] hdc: task_no_data_intr: error=0x04 { DriveStatusError }
Jun 22 16:36:20 FileServer kernel: [ 221.068953] ide: failed opcode was: 0xef
Jun 22 16:36:20 FileServer kernel: [ 221.275578] usb 1-2.4: configuration #1 chosen from 1 choice
Jun 22 16:36:20 FileServer kernel: [ 221.281380] scsi7 : SCSI emulation for USB Mass Storage devices
Jun 22 16:36:20 FileServer kernel: [ 221.288266] usb-storage: device found at 10
Jun 22 16:36:20 FileServer kernel: [ 221.288281] usb-storage: waiting for device to settle before scanning
Jun 22 16:36:20 FileServer kernel: [ 221.290804] usb 1-2.4: New USB device found, idVendor=1bcf, idProduct=0c31
Jun 22 16:36:20 FileServer kernel: [ 221.290873] usb 1-2.4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
Jun 22 16:36:20 FileServer kernel: [ 221.290929] usb 1-2.4: Product: USB to Serial-ATA bridge
Jun 22 16:36:20 FileServer kernel: [ 221.290975] usb 1-2.4: Manufacturer: Sunplus Innovation Technology.
Jun 22 16:36:20 FileServer kernel: [ 221.291021] usb 1-2.4: SerialNumber: FF3200822A0000000000004FF17FFF
Jun 22 16:36:20 FileServer kernel: [ 221.312872] hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Jun 22 16:36:20 FileServer kernel: [ 221.313031] hdc: task_no_data_intr: error=0x04 { DriveStatusError }
Jun 22 16:36:20 FileServer kernel: [ 221.313159] ide: failed opcode was: 0xef
Jun 22 16:36:20 FileServer kernel: [ 221.631329] hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Jun 22 16:36:20 FileServer kernel: [ 221.631329] hdc: task_no_data_intr: error=0x04 { DriveStatusError }
Jun 22 16:36:20 FileServer kernel: [ 221.631329] ide: failed opcode was: 0xef
Jun 22 16:36:20 FileServer kernel: [ 221.848327] hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Jun 22 16:36:20 FileServer kernel: [ 221.848327] hdc: task_no_data_intr: error=0x04 { DriveStatusError }
Jun 22 16:36:20 FileServer kernel: [ 221.848327] ide: failed opcode was: 0xef
Jun 22 16:36:20 FileServer kernel: [ 221.995919] hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Jun 22 16:36:20 FileServer kernel: [ 221.995919] hdc: task_no_data_intr: error=0x04 { DriveStatusError }
Jun 22 16:36:20 FileServer kernel: [ 221.995919] ide: failed opcode was: 0xef
Jun 22 16:36:25 FileServer kernel: [ 226.289531] usb-storage: device scan complete
Jun 22 16:36:25 FileServer kernel: [ 226.296394] scsi 7:0:0:0: Direct-Access ST320082 2AS PQ: 0 ANSI: 2
Jun 22 16:36:25 FileServer kernel: [ 226.303519] sd 7:0:0:0: [sdg] 390721968 512-byte hardware sectors (200050 MB)
Jun 22 16:36:25 FileServer kernel: [ 226.308478] sd 7:0:0:0: [sdg] Write Protect is off
Jun 22 16:36:25 FileServer kernel: [ 226.308544] sd 7:0:0:0: [sdg] Mode Sense: 38 00 00 00
Jun 22 16:36:25 FileServer kernel: [ 226.308552] sd 7:0:0:0: [sdg] Assuming drive cache: write through
Jun 22 16:36:25 FileServer kernel: [ 226.313459] sd 7:0:0:0: [sdg] 390721968 512-byte hardware sectors (200050 MB)
Jun 22 16:36:25 FileServer kernel: [ 226.318458] sd 7:0:0:0: [sdg] Write Protect is off
Jun 22 16:36:25 FileServer kernel: [ 226.318521] sd 7:0:0:0: [sdg] Mode Sense: 38 00 00 00
Jun 22 16:36:25 FileServer kernel: [ 226.318528] sd 7:0:0:0: [sdg] Assuming drive cache: write through
Jun 22 16:36:25 FileServer kernel: [ 226.318587] sdg:<6>usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:25 FileServer kernel: [ 226.833310] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:26 FileServer kernel: [ 227.269210] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:26 FileServer kernel: [ 227.701142] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:26 FileServer kernel: [ 228.138054] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:27 FileServer kernel: [ 228.569963] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:27 FileServer kernel: [ 228.676011] sd 7:0:0:0: [sdg] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Jun 22 16:36:27 FileServer kernel: [ 228.676011] end_request: I/O error, dev sdg, sector 0
Jun 22 16:36:27 FileServer kernel: [ 228.676011] Buffer I/O error on device sdg, logical block 0
Jun 22 16:36:27 FileServer kernel: [ 229.005883] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:28 FileServer kernel: [ 229.441790] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:28 FileServer kernel: [ 229.873712] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:29 FileServer kernel: [ 230.305621] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:29 FileServer kernel: [ 230.741533] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:30 FileServer kernel: [ 231.177453] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:30 FileServer kernel: [ 231.289454] sd 7:0:0:0: [sdg] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Jun 22 16:36:30 FileServer kernel: [ 231.289548] end_request: I/O error, dev sdg, sector 0
Jun 22 16:36:30 FileServer kernel: [ 231.289596] Buffer I/O error on device sdg, logical block 0
Jun 22 16:36:30 FileServer kernel: [ 231.609363] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:30 FileServer kernel: [ 232.045280] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:31 FileServer kernel: [ 232.477196] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:31 FileServer kernel: [ 232.913102] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:32 FileServer kernel: [ 233.354020] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:32 FileServer kernel: [ 233.789930] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:32 FileServer kernel: [ 233.896011] sd 7:0:0:0: [sdg] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Jun 22 16:36:32 FileServer kernel: [ 233.896011] end_request: I/O error, dev sdg, sector 0
Jun 22 16:36:32 FileServer kernel: [ 233.896011] Buffer I/O error on device sdg, logical block 0
Jun 22 16:36:33 FileServer kernel: [ 234.221853] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:33 FileServer kernel: [ 234.657763] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:33 FileServer kernel: [ 235.093672] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:34 FileServer kernel: [ 235.525586] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:34 FileServer kernel: [ 235.961500] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:35 FileServer kernel: [ 236.393418] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:35 FileServer kernel: [ 236.502343] sd 7:0:0:0: [sdg] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Jun 22 16:36:35 FileServer kernel: [ 236.502343] end_request: I/O error, dev sdg, sector 0
Jun 22 16:36:35 FileServer kernel: [ 236.502343] Buffer I/O error on device sdg, logical block 0
Jun 22 16:36:35 FileServer kernel: [ 236.829331] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:36 FileServer kernel: [ 237.265243] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:36 FileServer kernel: [ 237.697164] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:36 FileServer kernel: [ 238.133089] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:37 FileServer kernel: [ 238.565989] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:37 FileServer kernel: [ 238.997900] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:37 FileServer kernel: [ 239.104011] sd 7:0:0:0: [sdg] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Jun 22 16:36:37 FileServer kernel: [ 239.104011] end_request: I/O error, dev sdg, sector 0
Jun 22 16:36:37 FileServer kernel: [ 239.104011] Buffer I/O error on device sdg, logical block 0
Jun 22 16:36:37 FileServer kernel: [ 239.104011] ldm_validate_partition_table(): Disk read failed.
Jun 22 16:36:38 FileServer kernel: [ 239.433812] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:38 FileServer kernel: [ 239.865731] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:39 FileServer kernel: [ 240.301643] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:39 FileServer kernel: [ 240.733557] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:40 FileServer kernel: [ 241.169474] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:40 FileServer kernel: [ 241.601383] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:40 FileServer kernel: [ 241.710312] sd 7:0:0:0: [sdg] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Jun 22 16:36:40 FileServer kernel: [ 241.710312] end_request: I/O error, dev sdg, sector 0
Jun 22 16:36:40 FileServer kernel: [ 241.710312] Buffer I/O error on device sdg, logical block 0
Jun 22 16:36:40 FileServer kernel: [ 242.037302] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:41 FileServer kernel: [ 242.473211] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:41 FileServer kernel: [ 242.905127] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:42 FileServer kernel: [ 243.342042] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:42 FileServer kernel: [ 243.773953] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:43 FileServer kernel: [ 244.209868] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:43 FileServer kernel: [ 244.316011] sd 7:0:0:0: [sdg] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Jun 22 16:36:43 FileServer kernel: [ 244.316011] end_request: I/O error, dev sdg, sector 0
Jun 22 16:36:43 FileServer kernel: [ 244.316011] Buffer I/O error on device sdg, logical block 0
Jun 22 16:36:43 FileServer kernel: [ 244.641788] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:43 FileServer kernel: [ 245.077694] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:44 FileServer kernel: [ 245.509613] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:44 FileServer kernel: [ 245.945522] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:45 FileServer kernel: [ 246.381441] usb 1-2.4: reset full speed USB device using uhci_hcd and address 10
Jun 22 16:36:45 FileServer kernel: [ 246.768330] Dev sdg: unable to read RDB block 0
Jun 22 16:36:45 FileServer kernel: [ 246.775402] unable to read partition table
Jun 22 16:36:45 FileServer kernel: [ 246.775720] sd 7:0:0:0: [sdg] Attached SCSI disk
Jun 22 16:36:46 FileServer kernel: [ 248.031983] hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Jun 22 16:36:46 FileServer kernel: [ 248.031983] hdc: task_no_data_intr: error=0x04 { DriveStatusError }
Jun 22 16:36:46 FileServer kernel: [ 248.031983] ide: failed opcode was: 0xef
Jun 22 16:36:54 FileServer kernel: [ 255.344091] usb 1-2: USB disconnect, address 8
Jun 22 16:36:54 FileServer kernel: [ 255.344143] usb 1-2.3: USB disconnect, address 9
Jun 22 16:36:54 FileServer kernel: [ 255.347039] usb 1-2.4: USB disconnect, address 10
Jun 22 16:37:06 FileServer kernel: [ 267.644043] usb 1-2: new full speed USB device using uhci_hcd and address 11
Jun 22 16:37:06 FileServer kernel: [ 267.792012] usb 1-2: configuration #1 chosen from 1 choice
Jun 22 16:37:06 FileServer kernel: [ 267.811147] hub 1-2:1.0: USB hub found
Jun 22 16:37:06 FileServer kernel: [ 267.813031] hub 1-2:1.0: 4 ports detected
Jun 22 16:37:06 FileServer kernel: [ 267.920372] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
Jun 22 16:37:06 FileServer kernel: [ 267.920434] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jun 22 16:37:06 FileServer kernel: [ 267.920480] usb 1-2: Product: USB2.0 Hub
Jun 22 16:37:06 FileServer kernel: [ 268.129937] usb 1-2.3: new full speed USB device using uhci_hcd and address 12
Jun 22 16:37:07 FileServer kernel: [ 268.248012] usb 1-2.3: configuration #1 chosen from 1 choice
Jun 22 16:37:07 FileServer kernel: [ 268.258289] scsi8 : SCSI emulation for USB Mass Storage devices
Jun 22 16:37:07 FileServer kernel: [ 268.268566] usb 1-2.3: New USB device found, idVendor=05e3, idProduct=0716
Jun 22 16:37:07 FileServer kernel: [ 268.268630] usb 1-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=2
Jun 22 16:37:07 FileServer kernel: [ 268.268683] usb 1-2.3: Product: USB Storage
Jun 22 16:37:07 FileServer kernel: [ 268.268723] usb 1-2.3: SerialNumber: 000000009727
Jun 22 16:37:07 FileServer kernel: [ 268.269678] usb-storage: device found at 12
Jun 22 16:37:07 FileServer kernel: [ 268.269691] usb-storage: waiting for device to settle before scanning
Jun 22 16:37:12 FileServer kernel: [ 273.270012] usb-storage: device scan complete
Jun 22 16:37:12 FileServer kernel: [ 273.273000] scsi 8:0:0:0: Direct-Access Generic STORAGE DEVICE-A 9727 PQ: 0 ANSI: 0
Jun 22 16:37:12 FileServer kernel: [ 273.275987] scsi 8:0:0:1: Direct-Access Generic STORAGE DEVICE-A 9727 PQ: 0 ANSI: 0
Jun 22 16:37:12 FileServer kernel: [ 273.278979] scsi 8:0:0:2: Direct-Access Generic STORAGE DEVICE-A 9727 PQ: 0 ANSI: 0
Jun 22 16:37:12 FileServer kernel: [ 273.280883] scsi 8:0:0:3: Direct-Access Generic STORAGE DEVICE-A 9727 PQ: 0 ANSI: 0 CCS
Jun 22 16:37:12 FileServer kernel: [ 273.281861] scsi 8:0:0:4: Direct-Access Generic STORAGE DEVICE-A 9727 PQ: 0 ANSI: 0
Jun 22 16:37:12 FileServer kernel: [ 273.291304] sd 8:0:0:0: [sdb] Attached SCSI removable disk
Jun 22 16:37:12 FileServer kernel: [ 273.296350] sd 8:0:0:1: [sdc] Attached SCSI removable disk
Jun 22 16:37:12 FileServer kernel: [ 273.301250] sd 8:0:0:2: [sdd] Attached SCSI removable disk
Jun 22 16:37:12 FileServer kernel: [ 273.306227] sd 8:0:0:3: [sde] Attached SCSI removable disk
Jun 22 16:37:12 FileServer kernel: [ 273.311279] sd 8:0:0:4: [sdf] Attached SCSI removable disk
Jun 22 16:37:14 FileServer kernel: [ 275.308488] hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Jun 22 16:37:14 FileServer kernel: [ 275.308488] hdc: task_no_data_intr: error=0x04 { DriveStatusError }
Jun 22 16:37:14 FileServer kernel: [ 275.308488] ide: failed opcode was: 0xef
Jun 22 16:37:14 FileServer kernel: [ 275.513471] usb 1-2.4: new full speed USB device using uhci_hcd and address 13
Jun 22 16:37:14 FileServer kernel: [ 275.620012] usb 1-2.4: configuration #1 chosen from 1 choice
Jun 22 16:37:14 FileServer kernel: [ 275.645415] scsi9 : SCSI emulation for USB Mass Storage devices
Jun 22 16:37:14 FileServer kernel: [ 275.652259] usb-storage: device found at 13
Jun 22 16:37:14 FileServer kernel: [ 275.652275] usb-storage: waiting for device to settle before scanning
Jun 22 16:37:14 FileServer kernel: [ 275.654882] usb 1-2.4: New USB device found, idVendor=1bcf, idProduct=0c31
Jun 22 16:37:14 FileServer kernel: [ 275.654950] usb 1-2.4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
Jun 22 16:37:14 FileServer kernel: [ 275.655007] usb 1-2.4: Product: USB to Serial-ATA bridge
Jun 22 16:37:14 FileServer kernel: [ 275.655051] usb 1-2.4: Manufacturer: Sunplus Innovation Technology.
Jun 22 16:37:14 FileServer kernel: [ 275.655098] usb 1-2.4: SerialNumber: FF3200822A0000000000004FF17FFF
Jun 22 16:37:14 FileServer kernel: [ 275.927988] hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Jun 22 16:37:14 FileServer kernel: [ 275.928010] hdc: task_no_data_intr: error=0x04 { DriveStatusError }
Jun 22 16:37:14 FileServer kernel: [ 275.928010] ide: failed opcode was: 0xef
Jun 22 16:37:15 FileServer kernel: [ 276.453438] hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Jun 22 16:37:15 FileServer kernel: [ 276.453438] hdc: task_no_data_intr: error=0x04 { DriveStatusError }
Jun 22 16:37:15 FileServer kernel: [ 276.453438] ide: failed opcode was: 0xef
Jun 22 16:37:15 FileServer kernel: [ 276.580033] hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Jun 22 16:37:15 FileServer kernel: [ 276.580033] hdc: task_no_data_intr: error=0x04 { DriveStatusError }
Jun 22 16:37:15 FileServer kernel: [ 276.580033] ide: failed opcode was: 0xef
Jun 22 16:37:15 FileServer kernel: [ 276.773811] hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Jun 22 16:37:15 FileServer kernel: [ 276.773968] hdc: task_no_data_intr: error=0x04 { DriveStatusError }
Jun 22 16:37:15 FileServer kernel: [ 276.774096] ide: failed opcode was: 0xef
Jun 22 16:37:19 FileServer kernel: [ 280.653566] usb-storage: device scan complete
Jun 22 16:37:19 FileServer kernel: [ 280.660421] scsi 9:0:0:0: Direct-Access ST320082 2AS PQ: 0 ANSI: 2
Jun 22 16:37:19 FileServer kernel: [ 280.679484] sd 9:0:0:0: [sdg] 390721968 512-byte hardware sectors (200050 MB)
Jun 22 16:37:19 FileServer kernel: [ 280.684492] sd 9:0:0:0: [sdg] Write Protect is off
Jun 22 16:37:19 FileServer kernel: [ 280.684553] sd 9:0:0:0: [sdg] Mode Sense: 38 00 00 00
Jun 22 16:37:19 FileServer kernel: [ 280.684561] sd 9:0:0:0: [sdg] Assuming drive cache: write through
Jun 22 16:37:19 FileServer kernel: [ 280.689474] sd 9:0:0:0: [sdg] 390721968 512-byte hardware sectors (200050 MB)
Jun 22 16:37:19 FileServer kernel: [ 280.694484] sd 9:0:0:0: [sdg] Write Protect is off
Jun 22 16:37:19 FileServer kernel: [ 280.694544] sd 9:0:0:0: [sdg] Mode Sense: 38 00 00 00
Jun 22 16:37:19 FileServer kernel: [ 280.694552] sd 9:0:0:0: [sdg] Assuming drive cache: write through
Jun 22 16:37:19 FileServer kernel: [ 280.694611] sdg:<6>usb 1-2.4: reset full speed USB device using uhci_hcd and address 13
Jun 22 16:37:20 FileServer kernel: [ 281.209342] usb 1-2.4: reset full speed USB device using uhci_hcd and address 13
Jun 22 16:37:20 FileServer kernel: [ 281.645255] usb 1-2.4: reset full speed USB device using uhci_hcd and address 13
Jun 22 16:37:20 FileServer kernel: [ 282.077177] usb 1-2.4: reset full speed USB device using uhci_hcd and address 13
Jun 22 16:37:21 FileServer kernel: [ 282.513082] usb 1-2.4: reset full speed USB device using uhci_hcd and address 13
Jun 22 16:37:21 FileServer kernel: [ 282.893001] sdg1
Jun 22 16:37:21 FileServer kernel: [ 282.893001] sd 9:0:0:0: [sdg] Attached SCSI disk
Jun 22 16:37:22 FileServer kernel: [ 284.127033] hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Jun 22 16:37:22 FileServer kernel: [ 284.127033] hdc: task_no_data_intr: error=0x04 { DriveStatusError }
Jun 22 16:37:22 FileServer kernel: [ 284.127033] ide: failed opcode was: 0xef
Jun 22 16:37:59 FileServer kernel: [ 321.082013] NTFS driver 2.1.29 [Flags: R/W MODULE].
Jun 22 16:38:48 FileServer kernel: [ 369.893781] usb 1-2.4: reset full speed USB device using uhci_hcd and address 13
Jun 22 16:38:49 FileServer kernel: [ 370.325703] usb 1-2.4: reset full speed USB device using uhci_hcd and address 13
Jun 22 16:38:49 FileServer kernel: [ 370.761615] usb 1-2.4: reset full speed USB device using uhci_hcd and address 13
Jun 22 16:38:50 FileServer kernel: [ 371.201524] usb 1-2.4: reset full speed USB device using uhci_hcd and address 13
Jun 22 16:38:50 FileServer kernel: [ 371.637443] usb 1-2.4: reset full speed USB device using uhci_hcd and address 13
Jun 22 16:38:50 FileServer kernel: [ 372.073349] usb 1-2.4: reset full speed USB device using uhci_hcd and address 13
Jun 22 16:38:51 FileServer kernel: [ 372.180012] sd 9:0:0:0: [sdg] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Jun 22 16:38:51 FileServer kernel: [ 372.180012] end_request: I/O error, dev sdg, sector 63
Jun 22 16:38:51 FileServer kernel: [ 372.180012] NTFS-fs error (device sdg1): read_ntfs_boot_sector(): Unable to read primary boot sector.
Jun 22 16:38:51 FileServer kernel: [ 372.180012] NTFS-fs error (device sdg1): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
Jun 22 16:38:51 FileServer kernel: [ 372.180012] NTFS-fs error (device sdg1): ntfs_fill_super(): Not an NTFS volume.
Jun 22 16:39:01 FileServer kernel: [ 382.584101] usb 1-2: USB disconnect, address 11
Jun 22 16:39:01 FileServer kernel: [ 382.584149] usb 1-2.3: USB disconnect, address 12
Jun 22 16:39:01 FileServer kernel: [ 382.587068] usb 1-2.4: USB disconnect, address 13
Reply to: