Re: [RISOLTO]Re: E "eth1:1" dov'è finito?
Giorgio Bompiani ha scritto:
> comunque guarda qui, c'è qualche cosa di sospetto, anche se funziona:
>
>> pc-studio:~# /etc/init.d/networking restart
>> Reconfiguring network interfaces...Stopping the Firestarter firewall....
>> Starting the Firestarter firewall....
>> There is already a pid file /var/run/dhclient.eth1.pid with pid 5171
>> killed old client process, removed PID file
>> Internet Systems Consortium DHCP Client V3.1.1
>> Copyright 2004-2008 Internet Systems Consortium.
>> All rights reserved.
>> For info, please visit http://www.isc.org/sw/dhcp/
>>
>> Listening on LPF/eth1/00:1b:fc:af:a8:12
>> Sending on LPF/eth1/00:1b:fc:af:a8:12
>> Sending on Socket/fallback
>> DHCPRELEASE on eth1 to 23.10.67.80 port 67
>> Stopping the Firestarter firewall....
>> Starting the Firestarter firewall... failed!
>> run-parts: /etc/network/if-down.d/50firestarter exited with return
>> code 2
>> SIOCSIFFLAGS: Cannot assign requested address
>> Internet Systems Consortium DHCP Client V3.1.1
>> Copyright 2004-2008 Internet Systems Consortium.
>> All rights reserved.
>> For info, please visit http://www.isc.org/sw/dhcp/
>>
>> Listening on LPF/eth1/00:1b:fc:af:a8:12
>> Sending on LPF/eth1/00:1b:fc:af:a8:12
>> Sending on Socket/fallback
>> DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 6
>> DHCPOFFER from 23.10.67.80
>> DHCPREQUEST on eth1 to 255.255.255.255 port 67
>> DHCPACK from 23.10.67.80
>> SIOCADDRT: File exists
>> bound to 23.10.67.83 -- renewal in 1612 seconds.
>> Stopping the Firestarter firewall....
>> Starting the Firestarter firewall....
>> if-up.d/mountnfs[eth1]: waiting for interface eth1:1 before doing NFS
>> mounts (warning).
>> Stopping the Firestarter firewall....
>> Starting the Firestarter firewall....
>> done.
in verità non c'è nulla di sospetto, anzi, è esattamente quello che deve
succedere.
ora con questa configurazione, dopo un reboot, le interfacce non sono
ancora attive?
> Ciao
ciao
Ale
Reply to: