installazione debian su a6km (amd64)
Sera, dopo aver realizzato l'immagine di wxp, mi sono cimentato con
l'installazione di debian testing (terminata poco fa).
L'hd l'ho partizionato nel seguente modo (anche se credo di aver fatto
una caxxata :) )
######################
# fdisk -l
Disk /dev/sda: 100.0 GB, 100030242816 bytes
255 heads, 63 sectors/track, 12161 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xd53d826f
Device Boot Start End Blocks Id System
/dev/sda1 1 1305 10482381 7 HPFS/NTFS
/dev/sda2 1306 1439 1076355 b W95 FAT32
(swap di wxp)
/dev/sda3 1470 12161 85883490 5 Extended
/dev/sda4 * 1440 1469 240975 83 Linux
/dev/sda5 12101 12161 489982+ 82 Linux swap /
Solaris
/dev/sda6 1470 1499 240912 83 Linux
/dev/sda7 1500 2411 7325608+ 83 Linux
/dev/sda8 6386 12099 45897673+ 83 Linux
/dev/sda9 2412 2593 1461883+ 83 Linux
/dev/sda10 2594 2775 1461883+ 83 Linux
/dev/sda11 2776 3930 9277506 83 Linux
Partition table entries are not in disk order
######################
montati in questo modo
######################
# df -h
Filesystem Dimens. Usati Disp. Uso% Montato su
/dev/sda4 236M 153M 83M 65% /
tmpfs 1008M 0 1008M 0% /lib/init/rw
udev 10M 144K 9,9M 2% /dev
tmpfs 1008M 0 1008M 0% /dev/shm
/dev/sda6 236M 48M 188M 21% /boot
/dev/sda11 8,8G 164M 8,2G 2% /home
/dev/sda8 44G 181M 43G 1% /media/share
/dev/sda9 1,4G 33M 1,4G 3% /tmp
/dev/sda7 7,0G 2,0G 5,0G 29% /usr
/dev/sda10 1,4G 1014M 414M 72% /var
######################
Dopo aver installato grub ed aver riavviato il sistema sono iniziati i
primi problemi:
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
che ho risolto aggiungendo pci=nommconf; ho dovuto inoltre cambiare /
dev/hda* con /dev/sda* (anche in fstab)
######################
title Debian GNU/Linux, kernel 2.6.25-2-amd64
root (hd0,5)
kernel /vmlinuz-2.6.25-2-amd64 root=/dev/hda4 ro quiet
initrd /initrd.img-2.6.25-2-amd64
title NUOVO Debian GNU/Linux, kernel 2.6.25-2-amd64
root (hd0,5)
kernel /vmlinuz-2.6.25-2-amd64 root=/dev/sda4 ro quiet
pci=nommconf
initrd /initrd.img-2.6.25-2-amd64
######################
######################
# cat /etc/fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/sda4 / reiserfs defaults 0 1
/dev/sda6 /boot reiserfs notail 0 2
/dev/sda11 /home ext3 defaults 0 2
/dev/sda8 /media/share ext3 defaults 0 2
/dev/sda9 /tmp reiserfs defaults 0 2
/dev/sda7 /usr reiserfs defaults 0 2
/dev/sda10 /var reiserfs defaults 0 2
/dev/sda5 none swap sw 0 0
/dev/hdc /media/cdrom0 udf,iso9660 user,noauto 0 0
######################
Il problema è che dopo queste modifiche all'avvio devo comunque
inserire /dev/sda5 manualmente per far partire il tutto.
Ho chiesto un po in giro, ma finora non ho avuto chiarimenti, potete aiutarmi
grazie
######################
#dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.25-2-amd64 (Debian 2.6.25-7)
(maks@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian
4.1.2-23)) #1 SMP Mon Jul 14 11:05:23 UTC 2008
[ 0.000000] Command line: root=/dev/sda4 ro quiet pci=nommconf
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00
(usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000
(reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000
(reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffd0000
(usable)
[ 0.000000] BIOS-e820: 000000007ffd0000 - 000000007ffde000 (ACPI
data)
[ 0.000000] BIOS-e820: 000000007ffde000 - 0000000080000000 (ACPI
NVS)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000
(reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200
used
[ 0.000000] Entering add_active_range(0, 256, 524240) 1 entries of
3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000F7870, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 7FFD0000, 0034 (r1 A M I OEMRSDT 7000705
MSFT 97)
[ 0.000000] ACPI: FACP 7FFD0200, 0084 (r2 A M I OEMFACP 7000705
MSFT 97)
[ 0.000000] ACPI: DSDT 7FFD0430, 765B (r1 1ABZX 1ABZX001 1
INTL 2002026)
[ 0.000000] ACPI: FACS 7FFDE000, 0040
[ 0.000000] ACPI: APIC 7FFD0390, 0054 (r1 A M I OEMAPIC 7000705
MSFT 97)
[ 0.000000] ACPI: MCFG 7FFD03F0, 003C (r1 A M I OEMMCFG 7000705
MSFT 97)
[ 0.000000] ACPI: OEMB 7FFDE040, 0046 (r1 A M I AMI_OEM 7000705
MSFT 97)
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007ffd0000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200
used
[ 0.000000] Entering add_active_range(0, 256, 524240) 1 entries of
3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007ffd0000
[ 0.000000] NODE_DATA [000000000000c000 - 0000000000012fff]
[ 0.000000] bootmap [0000000000013000 - 0000000000022fff] pages
10
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] SMP_TRAMPOLINE
[ 0.000000] early res: 2 [200000-63d2f7] TEXT DATA BSS
[ 0.000000] early res: 3 [3790f000-37fef641] RAMDISK
[ 0.000000] early res: 4 [9fc00-a0bff] EBDA
[ 0.000000] early res: 5 [8000-bfff] PGTABLE
[ 0.000000] No mptable found.
[ 0.000000] [ffffe20000000000-ffffe200001fffff] PMD -
>ffff810001200000 on node 0
[ 0.000000] [ffffe20000200000-ffffe200003fffff] PMD -
>ffff810001600000 on node 0
[ 0.000000] [ffffe20000400000-ffffe200005fffff] PMD -
>ffff810001a00000 on node 0
[ 0.000000] [ffffe20000600000-ffffe200007fffff] PMD -
>ffff810001e00000 on node 0
[ 0.000000] [ffffe20000800000-ffffe200009fffff] PMD -
>ffff810002200000 on node 0
[ 0.000000] [ffffe20000a00000-ffffe20000bfffff] PMD -
>ffff810002600000 on node 0
[ 0.000000] [ffffe20000c00000-ffffe20000dfffff] PMD -
>ffff810002a00000 on node 0
[ 0.000000] [ffffe20000e00000-ffffe20000ffffff] PMD -
>ffff810002e00000 on node 0
[ 0.000000] [ffffe20001000000-ffffe200011fffff] PMD -
>ffff810003200000 on node 0
[ 0.000000] [ffffe20001200000-ffffe200013fffff] PMD -
>ffff810003600000 on node 0
[ 0.000000] [ffffe20001400000-ffffe200015fffff] PMD -
>ffff810003a00000 on node 0
[ 0.000000] [ffffe20001600000-ffffe200017fffff] PMD -
>ffff810003e00000 on node 0
[ 0.000000] [ffffe20001800000-ffffe200019fffff] PMD -
>ffff810004200000 on node 0
[ 0.000000] [ffffe20001a00000-ffffe20001bfffff] PMD -
>ffff810004600000 on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 524240
[ 0.000000] On node 0 totalpages: 524143
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1093 pages reserved
[ 0.000000] DMA zone: 2850 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7111 pages used for memmap
[ 0.000000] DMA32 zone: 513033 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl
dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low
level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap:
80000000:7f780000)
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 35096 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 515883
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda4 ro quiet
pci=nommconf
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000002] time.c: Detected 1800.057 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] Node 0: aperture @ 7ec000000 size 32 MB
[ 0.004000] Aperture beyond 4GB. Ignoring.
[ 0.004000] No AGP bridge found
[ 0.004000] Memory: 2056244k/2096960k available (2184k kernel code,
40328k reserved, 1012k data, 372k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084007] Calibrating delay using timer specific routine..
3602.47 BogoMIPS (lpj=7204953)
[ 0.084063] Security Framework initialized
[ 0.084070] SELinux: Disabled at boot.
[ 0.084074] Capability LSM initialized
[ 0.084320] Dentry cache hash table entries: 262144 (order: 9,
2097152 bytes)
[ 0.086270] Inode-cache hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.087198] Mount-cache hash table entries: 256
[ 0.087388] Initializing cgroup subsys ns
[ 0.087393] Initializing cgroup subsys cpuacct
[ 0.087414] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.087417] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.087420] CPU 0/0 -> Node 0
[ 0.087441] SMP alternatives: switching to UP code
[ 0.088014] Freeing SMP alternatives: 23k freed
[ 0.088028] ACPI: Core revision 20070126
[ 0.140836] Using local APIC timer interrupts.
[ 0.144010] APIC timer calibration result 12500396
[ 0.144012] Detected 12.500 MHz APIC timer.
[ 0.144081] Brought up 1 CPUs
[ 0.144179] CPU0 attaching sched-domain:
[ 0.144183] domain 0: span 00000001
[ 0.144185] groups: 00000001
[ 0.144408] net_namespace: 1016 bytes
[ 0.144412] Booting paravirtualized kernel on bare hardware
[ 0.144639] NET: Registered protocol family 16
[ 0.144853] ACPI: bus type pci registered
[ 0.144935] PCI: Using configuration type 1
[ 0.151059] ACPI: EC: Look up EC in DSDT
[ 0.157091] ACPI: Interpreter enabled
[ 0.157094] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.157118] ACPI: Using IOAPIC for interrupt routing
[ 0.167523] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data
= 0x62
[ 0.167526] ACPI: EC: driver started in poll mode
[ 0.167656] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.168500] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.168730] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.P0P1._PRT]
[ 0.187286] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12
14 15)
[ 0.187468] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12
14 15)
[ 0.187645] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12
14 15)
[ 0.187823] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12
14 15)
[ 0.188000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12
14 15)
[ 0.188185] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 7 10 11 12
14 15)
[ 0.188364] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12
14 15)
[ 0.188544] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12
14 15)
[ 0.188702] ACPI: Power Resource [GFAN] (off)
[ 0.188781] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.188813] pnp: PnP ACPI init
[ 0.188820] ACPI: bus type pnp registered
[ 0.189029] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03
(active)
[ 0.189094] pnp 00:01: Plug and Play ACPI device, IDs PNP0200
(active)
[ 0.189154] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00
(active)
[ 0.189279] pnp 00:03: Plug and Play ACPI device, IDs PNP0303
PNP030b (active)
[ 0.189465] pnp 00:04: Plug and Play ACPI device, IDs SYN0a04
SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.189521] pnp 00:05: Plug and Play ACPI device, IDs PNP0800
(active)
[ 0.189577] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04
(active)
[ 0.190465] pnp 00:07: Plug and Play ACPI device, IDs PNP0510
(active)
[ 0.191107] pnp 00:08: Plug and Play ACPI device, IDs PNP0401
(active)
[ 0.191267] 00:09: calling quirk 0xffffffff8035ba3a:
quirk_system_pci_resources+0x0/0x173()
[ 0.191323] pnp 00:09: Plug and Play ACPI device, IDs PNP0c02
(active)
[ 0.191540] 00:0a: calling quirk 0xffffffff8035ba3a:
quirk_system_pci_resources+0x0/0x173()
[ 0.191591] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02
(active)
[ 0.191714] 00:0b: calling quirk 0xffffffff8035ba3a:
quirk_system_pci_resources+0x0/0x173()
[ 0.191766] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02
(active)
[ 0.191866] 00:0c: calling quirk 0xffffffff8035ba3a:
quirk_system_pci_resources+0x0/0x173()
[ 0.191917] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02
(active)
[ 0.192343] 00:0d: calling quirk 0xffffffff8035ba3a:
quirk_system_pci_resources+0x0/0x173()
[ 0.192397] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c01
(active)
[ 0.192854] pnp: PnP ACPI: found 14 devices
[ 0.192856] ACPI: ACPI bus type pnp unregistered
[ 0.193049] usbcore: registered new interface driver usbfs
[ 0.193115] usbcore: registered new interface driver hub
[ 0.193159] usbcore: registered new device driver usb
[ 0.193305] PCI: Using ACPI for IRQ routing
[ 0.193308] PCI: If a device doesn't work, try "pci=routeirq". If
it helps, post a report
[ 0.204029] ACPI: RTC can wake from S4
[ 0.216034] pnp: the driver 'system' has been registered
[ 0.216034] system 00:09: ioport range 0xa00-0xa0f has been
reserved
[ 0.216034] system 00:09: driver attached
[ 0.216034] system 00:0a: ioport range 0x480-0x48f has been
reserved
[ 0.216034] system 00:0a: ioport range 0x4d0-0x4d1 has been
reserved
[ 0.216034] system 00:0a: ioport range 0x800-0x8df has been
reserved
[ 0.216034] system 00:0a: ioport range 0x8e0-0x8ff has been
reserved
[ 0.216034] system 00:0a: iomem range 0xfff80000-0xffffffff could
not be reserved
[ 0.216034] system 00:0a: iomem range 0xffe80000-0xffefffff could
not be reserved
[ 0.216034] system 00:0a: iomem range 0xffb80000-0xffbfffff could
not be reserved
[ 0.216034] system 00:0a: iomem range 0xfed00000-0xfed003ff has
been reserved
[ 0.216034] system 00:0a: driver attached
[ 0.216034] system 00:0b: iomem range 0xfec00000-0xfec00fff has
been reserved
[ 0.216034] system 00:0b: iomem range 0xfee00000-0xfee00fff could
not be reserved
[ 0.216034] system 00:0b: driver attached
[ 0.216034] system 00:0c: iomem range 0xe0000000-0xefffffff has
been reserved
[ 0.216034] system 00:0c: driver attached
[ 0.216034] system 00:0d: iomem range 0x0-0x9ffff could not be
reserved
[ 0.216034] system 00:0d: iomem range 0xc0000-0xcffff has been
reserved
[ 0.216034] system 00:0d: iomem range 0xe0000-0xfffff could not be
reserved
[ 0.216034] system 00:0d: iomem range 0x100000-0x7fffffff could not
be reserved
[ 0.216034] system 00:0d: iomem range 0x0-0x0 could not be reserved
[ 0.216034] system 00:0d: driver attached
[ 0.216034] PCI: Bridge: 0000:00:01.0
[ 0.216034] IO window: disabled.
[ 0.216034] MEM window: 0xfa200000-0xfe2fffff
[ 0.216034] PREFETCH window:
0x00000000bde00000-0x00000000ddefffff
[ 0.216034] PCI: Bus 2, cardbus bridge: 0000:00:0a.0
[ 0.216034] IO window: 0x00001000-0x000010ff
[ 0.216034] IO window: 0x00001400-0x000014ff
[ 0.216034] PREFETCH window: 0x88000000-0x8bffffff
[ 0.216034] MEM window: 0x8c000000-0x8fffffff
[ 0.216034] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.216034] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level,
low) -> IRQ 17
[ 0.216034] NET: Registered protocol family 2
[ 0.252055] IP route cache hash table entries: 65536 (order: 7,
524288 bytes)
[ 0.252055] TCP established hash table entries: 262144 (order: 10,
4194304 bytes)
[ 0.253008] TCP bind hash table entries: 65536 (order: 8, 1048576
bytes)
[ 0.253931] TCP: Hash tables configured (established 262144 bind
65536)
[ 0.253935] TCP reno registered
[ 0.268062] checking if image is initramfs... it is
[ 0.716101] Switched to high resolution mode on CPU 0
[ 0.834012] Freeing initrd memory: 7041k freed
[ 0.841042] audit: initializing netlink socket (disabled)
[ 0.841056] type=2000 audit(1218145593.840:1): initialized
[ 0.841264] Total HugeTLB memory allocated, 0
[ 0.841353] VFS: Disk quotas dquot_6.5.1
[ 0.841383] Dquot-cache hash table entries: 512 (order 0, 4096
bytes)
[ 0.841481] io scheduler noop registered
[ 0.841483] io scheduler anticipatory registered
[ 0.841485] io scheduler deadline registered
[ 0.841496] io scheduler cfq registered (default)
[ 0.841562] pci 0000:01:00.0: Boot video device
[ 0.841651] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.841678] assign_interrupt_mode Found MSI capability
[ 0.841704] Allocate Port Service[0000:00:01.0:pcie00]
[ 0.844532] Real Time Clock Driver v1.12ac
[ 0.844626] Linux agpgart interface v0.103
[ 0.844629] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports,
IRQ sharing enabled
[ 0.844812] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.844987] pnp: the driver 'serial' has been registered
[ 0.845168] ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level,
low) -> IRQ 18
[ 0.845175] ACPI: PCI interrupt for device 0000:00:02.6 disabled
[ 0.845958] brd: module loaded
[ 0.846043] input: Macintosh mouse button emulation as /class/input/
input0
[ 0.846145] pnp: the driver 'i8042 kbd' has been registered
[ 0.846155] i8042 kbd 00:03: driver attached
[ 0.846189] pnp: the driver 'i8042 aux' has been registered
[ 0.846201] i8042 aux 00:04: driver attached
[ 0.846235] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at
0x60,0x64 irq 1,12
[ 0.848737] i8042.c: Detected active multiplexing controller, rev
1.1.
[ 0.849919] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.849924] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.849927] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.849930] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.849932] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.860165] mice: PS/2 mouse device common for all mice
[ 0.860165] cpuidle: using governor ladder
[ 0.860165] cpuidle: using governor menu
[ 0.860165] TCP cubic registered
[ 0.860165] NET: Registered protocol family 1
[ 0.860165] NET: Registered protocol family 17
[ 0.860166] registered taskstats version 1
[ 0.860166] Freeing unused kernel memory: 372k freed
[ 0.890697] input: AT Translated Set 2 keyboard as /class/input/
input1
[ 0.948721] ACPI: Transitioning device [FN00] to D3
[ 0.948773] ACPI: PNP0C0B:00 is registered as cooling_device0
[ 0.948779] ACPI: Fan [FN00] (off)
[ 0.954408] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.954457] ACPI: ACPI0007:00 is registered as cooling_device1
[ 0.954462] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.968916] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 0.970245] ACPI: Thermal Zone [THRM] (70 C)
[ 1.524399] No dock devices found.
[ 1.545881] SCSI subsystem initialized
[ 1.592308] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller
(OHCI) Driver
[ 1.592338] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level,
low) -> IRQ 20
[ 1.592354] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 1.592551] ohci_hcd 0000:00:03.0: new USB bus registered, assigned
bus number 1
[ 1.592574] ohci_hcd 0000:00:03.0: irq 20, io mem 0xfebff000
[ 1.592613] libata version 3.00 loaded.
[ 1.650365] usb usb1: configuration #1 chosen from 1 choice
[ 1.650394] hub 1-0:1.0: USB hub found
[ 1.650407] hub 1-0:1.0: 3 ports detected
[ 1.745765] sdhci: Secure Digital Host Controller Interface driver
[ 1.745769] sdhci: Copyright(c) Pierre Ossman
[ 1.752334] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0001
[ 1.752338] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.752341] usb usb1: Product: OHCI Host Controller
[ 1.752343] usb usb1: Manufacturer: Linux 2.6.25-2-amd64 ohci_hcd
[ 1.752345] usb usb1: SerialNumber: 0000:00:03.0
[ 1.752379] ACPI: PCI Interrupt 0000:00:03.1[b] -> GSI 21 (level,
low) -> IRQ 21
[ 1.752396] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 1.752459] ohci_hcd 0000:00:03.1: new USB bus registered, assigned
bus number 2
[ 1.752480] ohci_hcd 0000:00:03.1: irq 21, io mem 0xfebfe000
[ 1.810389] usb usb2: configuration #1 chosen from 1 choice
[ 1.810421] hub 2-0:1.0: USB hub found
[ 1.810434] hub 2-0:1.0: 3 ports detected
[ 1.912356] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0001
[ 1.912361] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.912363] usb usb2: Product: OHCI Host Controller
[ 1.912366] usb usb2: Manufacturer: Linux 2.6.25-2-amd64 ohci_hcd
[ 1.912368] usb usb2: SerialNumber: 0000:00:03.1
[ 1.912400] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level,
low) -> IRQ 22
[ 1.912418] ohci_hcd 0000:00:03.2: OHCI Host Controller
[ 1.912473] ohci_hcd 0000:00:03.2: new USB bus registered, assigned
bus number 3
[ 1.912494] ohci_hcd 0000:00:03.2: irq 22, io mem 0xfebfd000
[ 1.913303] Marking TSC unstable due to TSC halts in idle
[ 1.938348] usb usb3: configuration #1 chosen from 1 choice
[ 1.938378] hub 3-0:1.0: USB hub found
[ 1.938389] hub 3-0:1.0: 2 ports detected
[ 1.956265] usb 1-2: new full speed USB device using ohci_hcd and
address 2
[ 1.960328] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0001
[ 1.960331] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.960333] usb usb3: Product: OHCI Host Controller
[ 1.960335] usb usb3: Manufacturer: Linux 2.6.25-2-amd64 ohci_hcd
[ 1.960337] usb usb3: SerialNumber: 0000:00:03.2
[ 1.960400] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level,
low) -> IRQ 23
[ 1.960409] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 1.960461] ehci_hcd 0000:00:03.3: new USB bus registered, assigned
bus number 4
[ 1.960499] PCI: cache line size of 64 is not supported by device
0000:00:03.3
[ 1.960507] ehci_hcd 0000:00:03.3: irq 23, io mem 0xfebfc000
[ 2.088281] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00,
driver 10 Dec 2004
[ 2.088413] usb usb4: configuration #1 chosen from 1 choice
[ 2.088445] hub 4-0:1.0: USB hub found
[ 2.088454] hub 4-0:1.0: 8 ports detected
[ 2.104362] usb usb4: New USB device found, idVendor=1d6b,
idProduct=0002
[ 2.104365] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.104368] usb usb4: Product: EHCI Host Controller
[ 2.104370] usb usb4: Manufacturer: Linux 2.6.25-2-amd64 ehci_hcd
[ 2.104372] usb usb4: SerialNumber: 0000:00:03.3
[ 2.104430] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 18 (level,
low) -> IRQ 18
[ 2.160553] ssb: Sonics Silicon Backplane found on PCI device
0000:00:09.0
[ 2.160625] ACPI: PCI Interrupt 0000:00:0a.1[b] -> GSI 18 (level,
low) -> IRQ 18
[ 2.200510] firewire_ohci: Added fw-ohci device 0000:00:0a.1, OHCI
version 1.0
[ 2.200616] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[ 2.200644] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level,
low) -> IRQ 19
[ 2.200932] eth0: RTL8169sb/8110sb at 0xffffc200008b0c00,
00:15:f2:dc:8d:81, XID 10000000 IRQ 19
[ 2.201767] sdhci: SDHCI controller found at 0000:00:0a.2
[1180:0822] (rev 17)
[ 2.201777] ACPI: PCI Interrupt 0000:00:0a.2[C] -> GSI 19 (level,
low) -> IRQ 19
[ 2.201790] sdhc0:slot0: Will use DMA mode even though HW doesn't
fully claim to support it.
[ 2.201827] mmc0: SDHCI at 0xfebf9400 irq 19 DMA
[ 2.212519] pata_sis 0000:00:02.5: version 0.5.2
[ 2.213811] scsi0 : pata_sis
[ 2.215180] scsi1 : pata_sis
[ 2.215978] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma
0xffa0 irq 14
[ 2.215981] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma
0xffa8 irq 15
[ 2.248539] usb 1-2: device not accepting address 2, error -62
[ 2.256906] ata1.00: ATA-7: FUJITSU MHV2100AT PL, 000000A0, max
UDMA/100
[ 2.256910] ata1.00: 195371568 sectors, multi 16: LBA
[ 2.268549] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 2.305343] ata1.00: configured for UDMA/100
[ 2.317439] firewire_core: created device fw0: GUID
00e01800034f9bb7, S400
[ 2.361411] usb 4-4: new high speed USB device using ehci_hcd and
address 2
[ 2.373817] ata2.00: ATAPI: MATSHITADVD-RAM UJ-841S, 1.00, max UDMA/
33
[ 2.401445] usb 4-4: configuration #1 chosen from 1 choice
[ 2.401445] usb 4-4: New USB device found, idVendor=0402,
idProduct=5602
[ 2.401445] usb 4-4: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 2.401445] usb 4-4: Product: USB2.0 Camera
[ 2.453882] ata2.00: configured for UDMA/33
[ 2.454010] scsi 0:0:0:0: Direct-Access ATA FUJITSU
MHV2100A 0000 PQ: 0 ANSI: 5
[ 2.455723] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM
UJ-841S 1.00 PQ: 0 ANSI: 5
[ 2.461128] Uniform Multi-Platform E-IDE driver
[ 2.461132] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[ 2.491091] Driver 'sd' needs updating - please use bus_type
methods
[ 2.491197] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors
(100030 MB)
[ 2.491216] sd 0:0:0:0: [sda] Write Protect is off
[ 2.491219] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.491246] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.491311] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors
(100030 MB)
[ 2.491327] sd 0:0:0:0: [sda] Write Protect is off
[ 2.491330] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.491356] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.491360] sda:<4>Driver 'sr' needs updating - please use
bus_type methods
[ 2.527615] sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9<3>hub
4-0:1.0: unable to enumerate USB device on port 6
[ 2.535664] sda10 sda11 > sda4
[ 2.535904] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.540656] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/
form2 cdda tray
[ 2.540662] Uniform CD-ROM driver Revision: 3.20
[ 2.540729] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.560705] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.560729] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.745150] usb 3-2: new full speed USB device using ohci_hcd and
address 2
[ 2.852814] usb 3-2: configuration #1 chosen from 1 choice
[ 2.857150] usb 3-2: New USB device found, idVendor=0b05,
idProduct=1712
[ 2.857154] usb 3-2: New USB device strings: Mfr=0, Product=0,
SerialNumber=3
[ 2.857157] usb 3-2: SerialNumber: 0194E8-5B-0002
[ 3.178730] ReiserFS: sda4: found reiserfs format "3.6" with
standard journal
[ 3.178741] ReiserFS: sda4: using ordered data mode
[ 3.194214] ReiserFS: sda4: journal params: device sda4, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
[ 3.194993] ReiserFS: sda4: checking transaction log (sda4)
[ 3.202397] ReiserFS: sda4: Using r5 hash to sort names
[ 5.212626] input: Power Button (FF) as /class/input/input2
[ 5.237493] ACPI: Power Button (FF) [PWRF]
[ 5.237590] input: Power Button (CM) as /class/input/input3
[ 5.266081] ACPI: Power Button (CM) [PWRB]
[ 5.266164] input: Lid Switch as /class/input/input4
[ 5.277747] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[ 5.279616] ACPI: Lid Switch [LID]
[ 5.279699] input: Sleep Button (CM) as /class/input/input5
[ 5.309500] ACPI: Sleep Button (CM) [SLPB]
[ 5.309519] asus-laptop: Asus Laptop Support version 0.42
[ 5.312294] asus-laptop: A6Km model detected
[ 5.316376] Registered led device: asus::mail
[ 5.446982] ACPI: AC Adapter [AC0] (on-line)
[ 5.565040] ACPI: Battery Slot [BAT0] (battery absent)
[ 5.655058] ACPI: device:05 is registered as cooling_device2
[ 5.655205] input: Video Bus as /class/input/input6
[ 5.685533] ACPI: Video Device [VGA] (multi-head: yes rom: no
post: no)
[ 6.432663] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level,
low) -> IRQ 18
[ 6.537182] Bluetooth: Core ver 2.11
[ 6.581645] NET: Registered protocol family 31
[ 6.581648] Bluetooth: HCI device and connection manager
initialized
[ 6.581654] Bluetooth: HCI socket layer initialized
[ 6.605198] Bluetooth: HCI USB driver ver 2.9
[ 6.607809] usbcore: registered new interface driver hci_usb
[ 7.085274] b43-phy0: Broadcom 4318 WLAN found
[ 7.146097] input: PC Speaker as /class/input/input7
[ 7.161849] phy0: Selected rate control algorithm 'pid'
[ 7.239668] NET: Registered protocol family 23
[ 7.257591] intel8x0_measure_ac97_clock: measured 53220 usecs
[ 7.257595] intel8x0: clocking to 48000
[ 7.311314] Broadcom 43xx driver loaded [ Features: PMLR, Firmware-
ID: FW13 ]
[ 7.311382] Yenta: CardBus bridge found at 0000:00:0a.0 [1043:1107]
[ 7.438491] Yenta: ISA IRQ mask 0x0cb8, PCI irq 17
[ 7.438495] Socket status: 30000006
[ 7.710167] ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level,
low) -> IRQ 18
[ 7.813669] MC'97 1 converters and GPIO not ready (0xff00)
[ 7.828181] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3,
caps: 0xa04713/0x10008
[ 7.866243] input: SynPS/2 Synaptics TouchPad as /class/input/
input8
[ 7.896876] pnp: the driver 'parport_pc' has been registered
[ 7.896895] parport_pc 00:08: reported by Plug and Play ACPI
[ 7.896920] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[ 7.993715] parport_pc 00:08: driver attached
[ 9.149822] Adding 489972k swap on /dev/sda5. Priority:-1 extents:
1 across:489972k
[ 10.448504] loop: module loaded
[ 12.805969] ReiserFS: sda6: found reiserfs format "3.6" with
standard journal
[ 12.805980] ReiserFS: sda6: using ordered data mode
[ 12.806308] ReiserFS: sda6: journal params: device sda6, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
[ 12.808050] ReiserFS: sda6: checking transaction log (sda6)
[ 12.809679] ReiserFS: sda6: Using r5 hash to sort names
[ 12.905724] kjournald starting. Commit interval 5 seconds
[ 12.905876] EXT3 FS on sda11, internal journal
[ 12.905882] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.936802] kjournald starting. Commit interval 5 seconds
[ 12.937135] EXT3 FS on sda8, internal journal
[ 12.937140] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.959651] ReiserFS: sda9: found reiserfs format "3.6" with
standard journal
[ 12.959665] ReiserFS: sda9: using ordered data mode
[ 12.959963] ReiserFS: sda9: journal params: device sda9, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
[ 12.961583] ReiserFS: sda9: checking transaction log (sda9)
[ 12.975030] ReiserFS: sda9: Using r5 hash to sort names
[ 12.991150] ReiserFS: sda7: found reiserfs format "3.6" with
standard journal
[ 12.991150] ReiserFS: sda7: using ordered data mode
[ 12.992866] ReiserFS: sda7: journal params: device sda7, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
[ 12.994625] ReiserFS: sda7: checking transaction log (sda7)
[ 13.003829] ReiserFS: sda7: Using r5 hash to sort names
[ 13.015869] ReiserFS: sda10: found reiserfs format "3.6" with
standard journal
[ 13.015869] ReiserFS: sda10: using ordered data mode
[ 13.015943] ReiserFS: sda10: journal params: device sda10, size
8192, journal first block 18, max trans len 1024, max batch 900, max
commit age 30, max trans age 30
[ 13.016852] ReiserFS: sda10: checking transaction log (sda10)
[ 13.027957] ReiserFS: sda10: Using r5 hash to sort names
[ 13.961367] r8169: eth0: link up
[ 15.199716] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile
Technology MT-34 processors (1 cpu cores) (version 2.20.00)
[ 15.199716] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0xa
[ 15.199716] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xc
[ 15.199716] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x16
[ 16.410383] lp0: using parport0 (interrupt-driven).
[ 16.425072] ppdev: user-space parallel port driver
[ 16.603304] NET: Registered protocol family 10
[ 16.604056] lo: Disabled Privacy Extensions
[ 16.707136] Clocksource tsc unstable (delta = -93933502 ns)
[ 18.601058] pcmcia: Detected deprecated PCMCIA ioctl usage from
process: discover.
[ 18.601065] pcmcia: This interface will soon be removed from the
kernel; please expect breakage unless you upgrade to new tools.
[ 18.601069] pcmcia: see
http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html
for details.
[ 18.897030] warning: `avahi-daemon' uses 32-bit capabilities
(legacy support in use)
[ 19.871648] hub 4-0:1.0: unable to enumerate USB device on port 2
[ 20.079953] usb 2-1: new low speed USB device using ohci_hcd and
address 2
[ 20.204811] usb 2-1: configuration #1 chosen from 1 choice
[ 20.213145] usb 2-1: New USB device found, idVendor=046d,
idProduct=c025
[ 20.213151] usb 2-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 20.213154] usb 2-1: Product: USB-PS/2 Optical Mouse
[ 20.213156] usb 2-1: Manufacturer: B16_b_02
[ 20.521860] usbcore: registered new interface driver hiddev
[ 20.529090] input: B16_b_02 USB-PS/2 Optical Mouse as /class/input/
input9
[ 20.560891] input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2
Optical Mouse] on usb-0000:00:03.1-1
[ 20.560914] usbcore: registered new interface driver usbhid
[ 20.560918] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 20.857362] Bluetooth: L2CAP ver 2.9
[ 20.857366] Bluetooth: L2CAP socket layer initialized
[ 20.969512] Bluetooth: RFCOMM socket layer initialized
[ 20.969528] Bluetooth: RFCOMM TTY layer initialized
[ 20.969530] Bluetooth: RFCOMM ver 1.8
[ 21.161126] input: b43-phy0 as /class/input/input10
[ 21.285456] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
or load failed.
[ 21.285516] b43-phy0 ERROR: You must go to
http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and
download the latest firmware (version 4).
[ 24.199955] input: b43-phy0 as /class/input/input11
[ 24.272352] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
or load failed.
[ 24.272359] b43-phy0 ERROR: You must go to
http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and
download the latest firmware (version 4).
[ 32.373236] eth0: no IPv6 routers present
[ 35.311744] input: b43-phy0 as /class/input/input12
[ 35.376381] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
or load failed.
[ 35.376389] b43-phy0 ERROR: You must go to
http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and
download the latest firmware (version 4).
[ 44.670075] input: b43-phy0 as /class/input/input13
[ 44.735393] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
or load failed.
[ 44.735401] b43-phy0 ERROR: You must go to
http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and
download the latest firmware (version 4).
[ 49.858738] input: b43-phy0 as /class/input/input14
[ 49.930078] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
or load failed.
[ 49.930085] b43-phy0 ERROR: You must go to
http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and
download the latest firmware (version 4).
[ 55.829033] input: b43-phy0 as /class/input/input15
[ 55.900251] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
or load failed.
[ 55.900258] b43-phy0 ERROR: You must go to
http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and
download the latest firmware (version 4).
[ 64.320733] input: b43-phy0 as /class/input/input16
[ 64.389153] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
or load failed.
[ 64.389160] b43-phy0 ERROR: You must go to
http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and
download the latest firmware (version 4).
[ 73.839868] input: b43-phy0 as /class/input/input17
[ 73.927763] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
or load failed.
[ 73.927770] b43-phy0 ERROR: You must go to
http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and
download the latest firmware (version 4).
[ 77.762368] input: b43-phy0 as /class/input/input18
[ 77.833779] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
or load failed.
[ 77.833786] b43-phy0 ERROR: You must go to
http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and
download the latest firmware (version 4).
[ 116.909182] input: b43-phy0 as /class/input/input19
[ 116.984642] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
or load failed.
[ 116.984649] b43-phy0 ERROR: You must go to
http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and
download the latest firmware (version 4).
[ 126.575579] input: b43-phy0 as /class/input/input20
[ 126.646733] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
or load failed.
[ 126.646740] b43-phy0 ERROR: You must go to
http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and
download the latest firmware (version 4).
[ 139.447587] input: b43-phy0 as /class/input/input21
[ 139.519293] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
or load failed.
[ 139.519300] b43-phy0 ERROR: You must go to
http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and
download the latest firmware (version 4).
[ 154.212834] input: b43-phy0 as /class/input/input22
[ 154.284279] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
or load failed.
[ 154.284286] b43-phy0 ERROR: You must go to
http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and
download the latest firmware (version 4).
[ 171.660612] input: b43-phy0 as /class/input/input23
[ 171.738223] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
or load failed.
[ 171.738232] b43-phy0 ERROR: You must go to
http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and
download the latest firmware (version 4).
[ 201.266586] input: b43-phy0 as /class/input/input24
[ 201.334465] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
or load failed.
[ 201.334472] b43-phy0 ERROR: You must go to
http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and
download the latest firmware (version 4).
Reply to: