Re: Problema Kernel 2.6.23.1 e MTP device
Il giorno Wed, 14 Nov 2007 15:11:54 +0100
luigi curzi <luigi_curzi@yahoo.it> ha scritto:
> ho ricompilato l'ultimo kernel stabile (2.6.23.1) a mano; non ho
> problemi tranne per il fatto che non mi vede più DA UTENTE il mio
> creative v plus (lettore mp3) che è un device mtp; le porte usb
> funzionano, visto che il mio hd portatile va bene, ma il lettore non
> ne vuole sapere di andare. con il kernel debian (l'ultima versione in
> unstable) tutto va.
> inoltre ho provato ad usare (per quanto riguarda la parte dei driver
> per i controller usb, per il resto ho cambiato a mio piacimento)
> direttamente il config del kernel funzionante nel kernel nuovo, ma
> comunque ho lo stesso problema.
> mtp-detect mi restituisce:
> libmtp version: 0.2.2
>
> Attempting to connect device(s)
> Detect: No Devices have been found
> e amarok, di conseguenza, non vede nulla.
>
> da root invece tutto ok, quindi immagino sia un problema di permessi;
> nel file /etc/udev/libmtp6.rules ho:
> # Creative ZEN V Plus
> ATTR{idVendor}=="041e", ATTR{idProduct}=="4152", SYMLINK+="libmtp-%k",
> MODE="660", GROUP="audio"
>
> in dmesg ho questo:
> usb 5-8:1.0: uevent
> usb 5-8:1.0: uevent
> usb 5-8: uevent
> hub 5-0:1.0: debounce: port 8: total 100ms stable 100ms status 0x100
> hub 5-0:1.0: state 7 ports 8 chg 0000 evt 0100
> ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001803 POWER sig=j CSC
> CONNECT hub 5-0:1.0: port 8, status 0501, change 0001, 480 Mb/s
> hub 5-0:1.0: debounce: port 8: total 100ms stable 100ms status 0x501
> ehci_hcd 0000:00:1d.7: port 8 high speed
> ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001005 POWER sig=se0
> PE CONNECT usb 5-8: new high speed USB device using ehci_hcd and
> address 7 ehci_hcd 0000:00:1d.7: port 8 high speed
> ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001005 POWER sig=se0
> PE CONNECT usb 5-8: default language 0x0409
> usb 5-8: new device strings: Mfr=1, Product=2, SerialNumber=3
> usb 5-8: Product: Creative ZEN V Plus
> usb 5-8: Manufacturer: Creative Technology Ltd
> usb 5-8: SerialNumber: C6C847050002FA9D
> usb 5-8: uevent
> usb 5-8: usb_probe_device
> usb 5-8: configuration #1 chosen from 1 choice
> usb 5-8: adding 5-8:1.0 (config #1, interface 0)
> usb 5-8:1.0: uevent
> usb 5-8:1.0: uevent
> drivers/usb/core/inode.c: creating file '007'
>
> ma anche questo riguardo le porte usb:
> Nov 14 14:40:35 pozzaibe kernel: usb_id[1176]: segfault at 00000000
> eip 45d995d8 esp bf9d9400 error 4 Nov 14 14:40:35 pozzaibe kernel:
> usb_id[1187]: segfault at 00000000 eip 45d995d8 esp bffb41e0 error 4
> Nov 14 14:40:35 pozzaibe kernel: usb_id[1188]: segfault at 00000000
> eip 45d995d8 esp bfd44770 error 4
>
> il seguente è il mio /var/log/messages, dite che c'è qualcosa che non
> va?
>
> Nov 14 14:40:35 pozzaibe kernel: Linux version 2.6.23.1gg
> (root@pozzaibe) (gcc version 4.2.3 20071014 (prerelease) (Debian
> 4.2.2-3)) #1 PREEMPT Wed Nov 14 12:46:22 CET 2007 Nov 14 14:40:35
> pozzaibe kernel: BIOS-provided physical RAM map: Nov 14 14:40:35
> pozzaibe kernel: BIOS-e820: 0000000000000000 - 000000000009fc00
> (usable) Nov 14 14:40:35 pozzaibe kernel: BIOS-e820:
> 000000000009fc00 - 00000000000a0000 (reserved) Nov 14 14:40:35
> pozzaibe kernel: BIOS-e820: 00000000000e4000 - 0000000000100000
> (reserved) Nov 14 14:40:35 pozzaibe kernel: BIOS-e820:
> 0000000000100000 - 000000003ff40000 (usable) Nov 14 14:40:35 pozzaibe
> kernel: BIOS-e820: 000000003ff40000 - 000000003ff50000 (ACPI data)
> Nov 14 14:40:35 pozzaibe kernel: BIOS-e820: 000000003ff50000 -
> 0000000040000000 (ACPI NVS) Nov 14 14:40:35 pozzaibe kernel:
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Nov 14
> 14:40:35 pozzaibe kernel: BIOS-e820: 00000000ff380000 -
> 0000000100000000 (reserved) Nov 14 14:40:35 pozzaibe kernel: Warning
> only 896MB will be used. Nov 14 14:40:35 pozzaibe kernel: Use a
> HIGHMEM enabled kernel. Nov 14 14:40:35 pozzaibe kernel: 896MB LOWMEM
> available. Nov 14 14:40:35 pozzaibe kernel: Zone PFN ranges: Nov 14
> 14:40:35 pozzaibe kernel: DMA 0 -> 4096 Nov 14
> 14:40:35 pozzaibe kernel: Normal 4096 -> 229376 Nov 14
> 14:40:35 pozzaibe kernel: Movable zone start PFN for each node Nov 14
> 14:40:35 pozzaibe kernel: early_node_map[1] active PFN ranges Nov 14
> 14:40:35 pozzaibe kernel: 0: 0 -> 229376 Nov 14 14:40:35
> pozzaibe kernel: DMI 2.3 present. Nov 14 14:40:35 pozzaibe kernel:
> ACPI: RSDP 000FA550, 0014 (r0 ACPIAM) Nov 14 14:40:35 pozzaibe
> kernel: ACPI: RSDT 3FF40000, 0030 (r1 A M I OEMRSDT 9000608
> MSFT 97) Nov 14 14:40:35 pozzaibe kernel: ACPI: FACP 3FF40200,
> 0081 (r2 A M I OEMFACP 9000608 MSFT 97) Nov 14 14:40:35
> pozzaibe kernel: ACPI: DSDT 3FF40370, 3B3B (r1 P4i6G P4i6G122
> 122 INTL 2002026) Nov 14 14:40:35 pozzaibe kernel: ACPI: FACS
> 3FF50000, 0040 Nov 14 14:40:35 pozzaibe kernel: ACPI: APIC 3FF40300,
> 006C (r1 A M I OEMAPIC 9000608 MSFT 97) Nov 14 14:40:35
> pozzaibe kernel: ACPI: OEMB 3FF50040, 003F (r1 A M I OEMBIOS
> 9000608 MSFT 97) Nov 14 14:40:35 pozzaibe kernel: ACPI:
> PM-Timer IO Port: 0x808 Nov 14 14:40:35 pozzaibe kernel: ACPI: LAPIC
> (acpi_id[0x01] lapic_id[0x00] enabled) Nov 14 14:40:35 pozzaibe
> kernel: Processor #0 15:2 APIC version 20 Nov 14 14:40:35 pozzaibe
> kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) Nov 14
> 14:40:35 pozzaibe kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82]
> disabled) Nov 14 14:40:35 pozzaibe kernel: ACPI: LAPIC (acpi_id[0x04]
> lapic_id[0x83] disabled) Nov 14 14:40:35 pozzaibe kernel: ACPI:
> IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) Nov 14 14:40:35
> pozzaibe kernel: IOAPIC[0]: apic_id 1, version 32, address
> 0xfec00000, GSI 0-23 Nov 14 14:40:35 pozzaibe kernel: ACPI:
> INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Nov 14 14:40:35
> pozzaibe kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
> level) Nov 14 14:40:35 pozzaibe kernel: Enabling APIC mode: Flat.
> Using 1 I/O APICs Nov 14 14:40:35 pozzaibe kernel: Using ACPI (MADT)
> for SMP configuration information Nov 14 14:40:35 pozzaibe kernel:
> Allocating PCI resources starting at 50000000 (gap:
> 40000000:bee00000) Nov 14 14:40:35 pozzaibe kernel: Built 1 zonelists
> in Zone order. Total pages: 227584 Nov 14 14:40:35 pozzaibe kernel:
> Kernel command line: root=/dev/hdb1 ro Nov 14 14:40:35 pozzaibe
> kernel: Enabling fast FPU save and restore... done. Nov 14 14:40:35
> pozzaibe kernel: Enabling unmasked SIMD FPU exception support...
> done. Nov 14 14:40:35 pozzaibe kernel: Initializing CPU#0 Nov 14
> 14:40:35 pozzaibe kernel: PID hash table entries: 4096 (order: 12,
> 16384 bytes) Nov 14 14:40:35 pozzaibe kernel: Detected 2663.243 MHz
> processor. Nov 14 14:40:35 pozzaibe kernel: Console: colour VGA+
> 80x25 Nov 14 14:40:35 pozzaibe kernel: console [tty0] enabled Nov 14
> 14:40:35 pozzaibe kernel: Dentry cache hash table entries: 131072
> (order: 7, 524288 bytes) Nov 14 14:40:35 pozzaibe kernel: Inode-cache
> hash table entries: 65536 (order: 6, 262144 bytes) Nov 14 14:40:35
> pozzaibe kernel: Memory: 905292k/917504k available (1656k kernel
> code, 11728k reserved, 617k data, 180k init, 0k highmem) Nov 14
> 14:40:35 pozzaibe kernel: virtual kernel memory layout: Nov 14
> 14:40:35 pozzaibe kernel: fixmap : 0xfffb5000 - 0xfffff000
> ( 296 kB) Nov 14 14:40:35 pozzaibe kernel: vmalloc : 0xf8800000 -
> 0xfffb3000 ( 119 MB) Nov 14 14:40:35 pozzaibe kernel: lowmem :
> 0xc0000000 - 0xf8000000 ( 896 MB) Nov 14 14:40:35 pozzaibe
> kernel: .init : 0xc033c000 - 0xc0369000 ( 180 kB) Nov 14
> 14:40:35 pozzaibe kernel: .data : 0xc029e2c0 - 0xc03388d4
> ( 617 kB) Nov 14 14:40:35 pozzaibe kernel: .text : 0xc0100000 -
> 0xc029e2c0 (1656 kB) Nov 14 14:40:35 pozzaibe kernel: Checking if
> this processor honours the WP bit even in supervisor mode... Ok. Nov
> 14 14:40:35 pozzaibe kernel: SLUB: Genslabs=22, HWalign=64,
> Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Nov 14 14:40:35 pozzaibe
> kernel: Calibrating delay using timer specific routine.. 5328.53
> BogoMIPS (lpj=2664266) Nov 14 14:40:35 pozzaibe kernel: Mount-cache
> hash table entries: 512 Nov 14 14:40:35 pozzaibe kernel: CPU: Trace
> cache: 12K uops, L1 D cache: 8K Nov 14 14:40:35 pozzaibe kernel: CPU:
> L2 cache: 512K Nov 14 14:40:35 pozzaibe kernel: Intel machine check
> architecture supported. Nov 14 14:40:35 pozzaibe kernel: Intel
> machine check reporting enabled on CPU#0. Nov 14 14:40:35 pozzaibe
> kernel: CPU0: Intel P4/Xeon Extended MCE MSRs (12) available Nov 14
> 14:40:35 pozzaibe kernel: CPU0: Thermal monitoring enabled Nov 14
> 14:40:35 pozzaibe kernel: Compat vDSO mapped to ffffe000. Nov 14
> 14:40:35 pozzaibe kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz
> stepping 09 Nov 14 14:40:35 pozzaibe kernel: Checking 'hlt'
> instruction... OK. Nov 14 14:40:35 pozzaibe kernel: ACPI: Core
> revision 20070126 Nov 14 14:40:35 pozzaibe kernel: ENABLING IO-APIC
> IRQs Nov 14 14:40:35 pozzaibe kernel: ..TIMER: vector=0x31 apic1=0
> pin1=2 apic2=-1 pin2=-1 Nov 14 14:40:35 pozzaibe kernel: NET:
> Registered protocol family 16 Nov 14 14:40:35 pozzaibe kernel: ACPI:
> bus type pci registered Nov 14 14:40:35 pozzaibe kernel: PCI: PCI
> BIOS revision 2.10 entry at 0xf0031, last bus=2 Nov 14 14:40:35
> pozzaibe kernel: PCI: Using configuration type 1 Nov 14 14:40:35
> pozzaibe kernel: Setting up standard PCI resources Nov 14 14:40:35
> pozzaibe kernel: ACPI: Interpreter enabled Nov 14 14:40:35 pozzaibe
> kernel: ACPI: (supports S0 S5) Nov 14 14:40:35 pozzaibe kernel: ACPI:
> Using IOAPIC for interrupt routing Nov 14 14:40:35 pozzaibe kernel:
> ACPI: PCI Root Bridge [PCI0] (0000:00) Nov 14 14:40:35 pozzaibe
> kernel: PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO Nov
> 14 14:40:35 pozzaibe kernel: PCI quirk: region 0480-04bf claimed by
> ICH4 GPIO Nov 14 14:40:35 pozzaibe kernel: PCI: Transparent bridge -
> 0000:00:1e.0 Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt
> Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) Nov 14 14:40:35 pozzaibe
> kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14
> 15) Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt Link [LNKC]
> (IRQs 3 4 *5 6 7 10 11 12 14 15) Nov 14 14:40:35 pozzaibe kernel:
> ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) Nov
> 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3
> 4 5 6 7 10 11 12 14 15) *0, disabled. Nov 14 14:40:35 pozzaibe
> kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14
> 15) *0, disabled. Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI
> Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15) Nov 14
> 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5
> 6 7 10 *11 12 14 15) Nov 14 14:40:35 pozzaibe kernel: ACPI Warning
> (tbutils-0217): Incorrect checksum in table [OEMB] - 19, should be
> 0C [20070126] Nov 14 14:40:35 pozzaibe kernel: Linux Plug and Play
> Support v0.97 (c) Adam Belay Nov 14 14:40:35 pozzaibe kernel: pnp:
> PnP ACPI init Nov 14 14:40:35 pozzaibe kernel: ACPI: bus type pnp
> registered Nov 14 14:40:35 pozzaibe kernel: pnp: PnP ACPI: found 13
> devices Nov 14 14:40:35 pozzaibe kernel: ACPI: ACPI bus type pnp
> unregistered Nov 14 14:40:35 pozzaibe kernel: PnPBIOS: Disabled by
> ACPI PNP Nov 14 14:40:35 pozzaibe kernel: PCI: Using ACPI for IRQ
> routing Nov 14 14:40:35 pozzaibe kernel: PCI: If a device doesn't
> work, try "pci=routeirq". If it helps, post a report Nov 14 14:40:35
> pozzaibe kernel: ACPI: RTC can wake from S4 Nov 14 14:40:35 pozzaibe
> kernel: Time: tsc clocksource has been installed. Nov 14 14:40:35
> pozzaibe kernel: pnp: 00:07: iomem range 0xfed20000-0xfed8ffff has
> been reserved Nov 14 14:40:35 pozzaibe kernel: pnp: 00:07: iomem
> range 0xff380000-0xffefffff could not be reserved Nov 14 14:40:35
> pozzaibe kernel: pnp: 00:08: iomem range 0xfec00000-0xfec00fff has
> been reserved Nov 14 14:40:35 pozzaibe kernel: pnp: 00:08: iomem
> range 0xfee00000-0xfee00fff could not be reserved Nov 14 14:40:35
> pozzaibe kernel: pnp: 00:0b: ioport range 0x680-0x6ff has been
> reserved Nov 14 14:40:35 pozzaibe kernel: pnp: 00:0b: ioport range
> 0x295-0x296 has been reserved Nov 14 14:40:35 pozzaibe kernel: pnp:
> 00:0c: iomem range 0x0-0x9ffff could not be reserved Nov 14 14:40:35
> pozzaibe kernel: pnp: 00:0c: iomem range 0xc0000-0xdffff could not be
> reserved Nov 14 14:40:35 pozzaibe kernel: pnp: 00:0c: iomem range
> 0xe0000-0xfffff could not be reserved Nov 14 14:40:35 pozzaibe
> kernel: pnp: 00:0c: iomem range 0x100000-0x3fffffff could not be
> reserved Nov 14 14:40:35 pozzaibe kernel: PCI: Bridge: 0000:00:01.0
> Nov 14 14:40:35 pozzaibe kernel: IO window: disabled. Nov 14
> 14:40:35 pozzaibe kernel: MEM window: f3d00000-f7dfffff Nov 14
> 14:40:35 pozzaibe kernel: PREFETCH window: d3c00000-f3bfffff Nov 14
> 14:40:35 pozzaibe kernel: PCI: Bridge: 0000:00:1e.0 Nov 14 14:40:35
> pozzaibe kernel: IO window: b000-bfff Nov 14 14:40:35 pozzaibe
> kernel: MEM window: f7e00000-f7efffff Nov 14 14:40:35 pozzaibe
> kernel: PREFETCH window: disabled. Nov 14 14:40:35 pozzaibe kernel:
> NET: Registered protocol family 2 Nov 14 14:40:35 pozzaibe kernel: IP
> route cache hash table entries: 32768 (order: 5, 131072 bytes) Nov 14
> 14:40:35 pozzaibe kernel: TCP established hash table entries: 131072
> (order: 8, 1048576 bytes) Nov 14 14:40:35 pozzaibe kernel: TCP bind
> hash table entries: 65536 (order: 6, 262144 bytes) Nov 14 14:40:35
> pozzaibe kernel: TCP: Hash tables configured (established 131072 bind
> 65536) Nov 14 14:40:35 pozzaibe kernel: TCP reno registered Nov 14
> 14:40:35 pozzaibe kernel: audit: initializing netlink socket
> (disabled) Nov 14 14:40:35 pozzaibe kernel: audit(1195047621.173:1):
> initialized Nov 14 14:40:35 pozzaibe kernel: io scheduler noop
> registered Nov 14 14:40:35 pozzaibe kernel: io scheduler anticipatory
> registered Nov 14 14:40:35 pozzaibe kernel: io scheduler deadline
> registered Nov 14 14:40:35 pozzaibe kernel: io scheduler cfq
> registered (default) Nov 14 14:40:35 pozzaibe kernel: isapnp:
> Scanning for PnP cards... Nov 14 14:40:35 pozzaibe kernel: isapnp: No
> Plug & Play device found Nov 14 14:40:35 pozzaibe kernel: Serial:
> 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled Nov
> 14 14:40:35 pozzaibe kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4)
> is a 16550A Nov 14 14:40:35 pozzaibe kernel: 00:0a: ttyS0 at I/O
> 0x3f8 (irq = 4) is a 16550A Nov 14 14:40:35 pozzaibe kernel: Uniform
> Multi-Platform E-IDE driver Revision: 7.00alpha2 Nov 14 14:40:35
> pozzaibe kernel: ide: Assuming 33MHz system bus speed for PIO modes;
> override with idebus=xx Nov 14 14:40:35 pozzaibe kernel: ICH5: IDE
> controller at PCI slot 0000:00:1f.1 Nov 14 14:40:35 pozzaibe kernel:
> ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
> Nov 14 14:40:35 pozzaibe kernel: ICH5: chipset revision 2 Nov 14
> 14:40:35 pozzaibe kernel: ICH5: not 100% native mode: will probe irqs
> later Nov 14 14:40:35 pozzaibe kernel: ide0: BM-DMA at
> 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:DMA Nov 14 14:40:35
> pozzaibe kernel: ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings:
> hdc:DMA, hdd:DMA Nov 14 14:40:35 pozzaibe kernel: Switched to high
> resolution mode on CPU 0 Nov 14 14:40:35 pozzaibe kernel: hdb: MAXTOR
> STM3802110A, ATA DISK drive Nov 14 14:40:35 pozzaibe kernel: ide0 at
> 0x1f0-0x1f7,0x3f6 on irq 14 Nov 14 14:40:35 pozzaibe kernel: hdc:
> PHILIPS DVDR1640P, ATAPI CD/DVD-ROM drive Nov 14 14:40:35 pozzaibe
> kernel: hdd: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive Nov 14
> 14:40:35 pozzaibe kernel: ide1 at 0x170-0x177,0x376 on irq 15 Nov 14
> 14:40:35 pozzaibe kernel: hdb: max request size: 512KiB Nov 14
> 14:40:35 pozzaibe kernel: hdb: 156301488 sectors (80026 MB) w/2048KiB
> Cache, CHS=16383/255/63, UDMA(100) Nov 14 14:40:35 pozzaibe kernel:
> hdb: cache flushes supported Nov 14 14:40:35 pozzaibe kernel: hdb:
> hdb1 hdb2 hdb3 Nov 14 14:40:35 pozzaibe kernel: PNP: PS/2 Controller
> [PNP0f03:PS2M] at 0x60,0x64 irq 12 Nov 14 14:40:35 pozzaibe kernel:
> PNP: PS/2 controller doesn't have KBD irq; using default 1 Nov 14
> 14:40:35 pozzaibe kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
> Nov 14 14:40:35 pozzaibe kernel: serio: i8042 AUX port at 0x60,0x64
> irq 12 Nov 14 14:40:35 pozzaibe kernel: mice: PS/2 mouse device
> common for all mice Nov 14 14:40:35 pozzaibe kernel: TCP cubic
> registered Nov 14 14:40:35 pozzaibe kernel: NET: Registered protocol
> family 1 Nov 14 14:40:35 pozzaibe kernel: NET: Registered protocol
> family 17 Nov 14 14:40:35 pozzaibe kernel: Using IPI Shortcut mode
> Nov 14 14:40:35 pozzaibe kernel: kjournald starting. Commit interval
> 5 seconds Nov 14 14:40:35 pozzaibe kernel: EXT3-fs: mounted
> filesystem with ordered data mode. Nov 14 14:40:35 pozzaibe kernel:
> VFS: Mounted root (ext3 filesystem) readonly. Nov 14 14:40:35
> pozzaibe kernel: Freeing unused kernel memory: 180k freed Nov 14
> 14:40:35 pozzaibe kernel: Real Time Clock Driver v1.12ac Nov 14
> 14:40:35 pozzaibe kernel: Floppy drive(s): fd0 is 1.44M Nov 14
> 14:40:35 pozzaibe kernel: FDC 0 is a post-1991 82077 Nov 14 14:40:35
> pozzaibe kernel: usbcore: registered new interface driver usbfs Nov
> 14 14:40:35 pozzaibe kernel: usbcore: registered new interface driver
> hub Nov 14 14:40:35 pozzaibe kernel: usbcore: registered new device
> driver usb Nov 14 14:40:35 pozzaibe kernel: input: Power Button (FF)
> as /devices/virtual/input/input0 Nov 14 14:40:35 pozzaibe kernel:
> ACPI: Power Button (FF) [PWRF] Nov 14 14:40:35 pozzaibe kernel:
> input: Power Button (CM) as /devices/virtual/input/input1 Nov 14
> 14:40:35 pozzaibe kernel: ACPI: Power Button (CM) [PWRB] Nov 14
> 14:40:35 pozzaibe kernel: ACPI: Processor [CPU1] (supports 8
> throttling states) Nov 14 14:40:35 pozzaibe kernel: hdc: ATAPI 40X
> DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Nov 14 14:40:35
> pozzaibe kernel: Uniform CD-ROM driver Revision: 3.20 Nov 14 14:40:35
> pozzaibe kernel: hdd: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33)
> Nov 14 14:40:35 pozzaibe kernel: 8139too Fast Ethernet driver 0.9.28
> Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt 0000:02:05.0[A]
> -> GSI 22 (level, low) -> IRQ 17 Nov 14 14:40:35 pozzaibe kernel:
> eth0: RealTek RTL8139 at 0xf8854800, 00:13:8f:f7:a3:d6, IRQ 17 Nov 14
> 14:40:35 pozzaibe kernel: input: PC Speaker
> as /devices/platform/pcspkr/input/input2 Nov 14 14:40:35 pozzaibe
> kernel: Linux agpgart interface v0.102 Nov 14 14:40:35 pozzaibe
> kernel: parport_pc 00:06: reported by Plug and Play ACPI Nov 14
> 14:40:35 pozzaibe kernel: parport0: PC-style at 0x378 (0x778), irq 7,
> dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] Nov 14 14:40:35 pozzaibe
> kernel: USB Universal Host Controller Interface driver v3.0 Nov 14
> 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI
> 16 (level, low) -> IRQ 18 Nov 14 14:40:35 pozzaibe kernel: uhci_hcd
> 0000:00:1d.0: UHCI Host Controller Nov 14 14:40:35 pozzaibe kernel:
> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
> Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.0: detected 2
> ports Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.0: irq 18,
> io base 0x0000e000 Nov 14 14:40:35 pozzaibe kernel: usb usb1:
> Product: UHCI Host Controller Nov 14 14:40:35 pozzaibe kernel: usb
> usb1: Manufacturer: Linux 2.6.23.1gg uhci_hcd Nov 14 14:40:35
> pozzaibe kernel: usb usb1: SerialNumber: 0000:00:1d.0 Nov 14 14:40:35
> pozzaibe kernel: usb usb1: configuration #1 chosen from 1 choice Nov
> 14 14:40:35 pozzaibe kernel: hub 1-0:1.0: USB hub found Nov 14
> 14:40:35 pozzaibe kernel: hub 1-0:1.0: 2 ports detected Nov 14
> 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI
> 19 (level, low) -> IRQ 19 Nov 14 14:40:35 pozzaibe kernel: uhci_hcd
> 0000:00:1d.1: UHCI Host Controller Nov 14 14:40:35 pozzaibe kernel:
> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
> Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.1: detected 2
> ports Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.1: irq 19,
> io base 0x0000e400 Nov 14 14:40:35 pozzaibe kernel: usb usb2:
> Product: UHCI Host Controller Nov 14 14:40:35 pozzaibe kernel: usb
> usb2: Manufacturer: Linux 2.6.23.1gg uhci_hcd Nov 14 14:40:35
> pozzaibe kernel: usb usb2: SerialNumber: 0000:00:1d.1 Nov 14 14:40:35
> pozzaibe kernel: usb usb2: configuration #1 chosen from 1 choice Nov
> 14 14:40:35 pozzaibe kernel: hub 2-0:1.0: USB hub found Nov 14
> 14:40:35 pozzaibe kernel: hub 2-0:1.0: 2 ports detected Nov 14
> 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI
> 18 (level, low) -> IRQ 16 Nov 14 14:40:35 pozzaibe kernel: uhci_hcd
> 0000:00:1d.2: UHCI Host Controller Nov 14 14:40:35 pozzaibe kernel:
> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
> Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.2: detected 2
> ports Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.2: irq 16,
> io base 0x0000e800 Nov 14 14:40:35 pozzaibe kernel: usb usb3:
> Product: UHCI Host Controller Nov 14 14:40:35 pozzaibe kernel: usb
> usb3: Manufacturer: Linux 2.6.23.1gg uhci_hcd Nov 14 14:40:35
> pozzaibe kernel: usb usb3: SerialNumber: 0000:00:1d.2 Nov 14 14:40:35
> pozzaibe kernel: usb usb3: configuration #1 chosen from 1 choice Nov
> 14 14:40:35 pozzaibe kernel: hub 3-0:1.0: USB hub found Nov 14
> 14:40:35 pozzaibe kernel: hub 3-0:1.0: 2 ports detected Nov 14
> 14:40:35 pozzaibe kernel: udev: renamed network interface eth0 to
> eth1 Nov 14 14:40:35 pozzaibe kernel: iTCO_wdt: Intel TCO WatchDog
> Timer Driver v1.02 (26-Jul-2007) Nov 14 14:40:35 pozzaibe kernel:
> iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1,
> TCOBASE=0x0860) Nov 14 14:40:35 pozzaibe kernel: iTCO_wdt:
> initialized. heartbeat=30 sec (nowayout=0) Nov 14 14:40:35 pozzaibe
> kernel: ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) ->
> IRQ 18 Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.3: UHCI
> Host Controller Nov 14 14:40:35 pozzaibe kernel: uhci_hcd
> 0000:00:1d.3: new USB bus registered, assigned bus number 4 Nov 14
> 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.3: detected 2 ports Nov
> 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.3: irq 18, io base
> 0x0000ec00 Nov 14 14:40:35 pozzaibe kernel: usb usb4: Product: UHCI
> Host Controller Nov 14 14:40:35 pozzaibe kernel: usb usb4:
> Manufacturer: Linux 2.6.23.1gg uhci_hcd Nov 14 14:40:35 pozzaibe
> kernel: usb usb4: SerialNumber: 0000:00:1d.3 Nov 14 14:40:35 pozzaibe
> kernel: usb usb4: configuration #1 chosen from 1 choice Nov 14
> 14:40:35 pozzaibe kernel: hub 4-0:1.0: USB hub found Nov 14 14:40:35
> pozzaibe kernel: hub 4-0:1.0: 2 ports detected Nov 14 14:40:35
> pozzaibe kernel: usb 1-2: new low speed USB device using uhci_hcd and
> address 2 Nov 14 14:40:35 pozzaibe kernel: agpgart: Detected an Intel
> 865 Chipset. Nov 14 14:40:35 pozzaibe kernel: agpgart: AGP aperture
> is 64M @ 0xf8000000 Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI
> Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 20 Nov 14
> 14:40:35 pozzaibe kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
> Nov 14 14:40:35 pozzaibe kernel: ehci_hcd 0000:00:1d.7: new USB bus
> registered, assigned bus number 5 Nov 14 14:40:35 pozzaibe kernel:
> ehci_hcd 0000:00:1d.7: debug port 1 Nov 14 14:40:35 pozzaibe kernel:
> ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf7fffc00 Nov 14 14:40:35
> pozzaibe kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00,
> driver 10 Dec 2004 Nov 14 14:40:35 pozzaibe kernel: usb usb5:
> Product: EHCI Host Controller Nov 14 14:40:35 pozzaibe kernel: usb
> usb5: Manufacturer: Linux 2.6.23.1gg ehci_hcd Nov 14 14:40:35
> pozzaibe kernel: usb usb5: SerialNumber: 0000:00:1d.7 Nov 14 14:40:35
> pozzaibe kernel: usb usb5: configuration #1 chosen from 1 choice Nov
> 14 14:40:35 pozzaibe kernel: hub 5-0:1.0: USB hub found Nov 14
> 14:40:35 pozzaibe kernel: hub 5-0:1.0: 8 ports detected Nov 14
> 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI
> 22 (level, low) -> IRQ 17 Nov 14 14:40:35 pozzaibe kernel:
> firewire_ohci: Added fw-ohci device 0000:02:01.0, OHCI version 1.0
> Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt 0000:00:1f.3[B]
> -> GSI 17 (level, low) -> IRQ 21 Nov 14 14:40:35 pozzaibe kernel:
> gameport: EMU10K1 is pci0000:02:02.1/gameport0, io 0xbc00, speed
> 1125kHz Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt
> 0000:02:02.0[A] -> GSI 23 (level, low) -> IRQ 20 Nov 14 14:40:35
> pozzaibe kernel: Installing spdif_bug patch: Audigy 1 ES [SB0160] Nov
> 14 14:40:35 pozzaibe kernel: firewire_core: created new fw device fw0
> (0 config rom retries, S400) Nov 14 14:40:35 pozzaibe kernel: input:
> ImPS/2 Logitech Wheel Mouse
> as /devices/platform/i8042/serio1/input/input3 Nov 14 14:40:35
> pozzaibe kernel: usb 5-4: new high speed USB device using ehci_hcd
> and address 3 Nov 14 14:40:35 pozzaibe kernel: usb 5-4: Product:
> Maxtor 3200 Nov 14 14:40:35 pozzaibe kernel: usb 5-4: Manufacturer:
> Maxtor Corporation Nov 14 14:40:35 pozzaibe kernel: usb 5-4:
> SerialNumber: 2CAHVDQE Nov 14 14:40:35 pozzaibe kernel: usb 5-4:
> configuration #1 chosen from 1 choice Nov 14 14:40:35 pozzaibe
> kernel: SCSI subsystem initialized Nov 14 14:40:35 pozzaibe kernel:
> Initializing USB Mass Storage driver... Nov 14 14:40:35 pozzaibe
> kernel: usb 5-8: new high speed USB device using ehci_hcd and address
> 5 Nov 14 14:40:35 pozzaibe kernel: usb 5-8: Product: Creative ZEN V
> Plus Nov 14 14:40:35 pozzaibe kernel: usb 5-8: Manufacturer: Creative
> Technology Ltd Nov 14 14:40:35 pozzaibe kernel: usb 5-8:
> SerialNumber: C6C847050002FA9D Nov 14 14:40:35 pozzaibe kernel: usb
> 5-8: configuration #1 chosen from 1 choice Nov 14 14:40:35 pozzaibe
> kernel: scsi0 : SCSI emulation for USB Mass Storage devices Nov 14
> 14:40:35 pozzaibe kernel: usbcore: registered new interface driver
> usb-storage Nov 14 14:40:35 pozzaibe kernel: USB Mass Storage support
> registered. Nov 14 14:40:35 pozzaibe kernel: usb 1-2: new low speed
> USB device using uhci_hcd and address 4 Nov 14 14:40:35 pozzaibe
> kernel: usb 1-2: Product: USB-compliant keyboard Nov 14 14:40:35
> pozzaibe kernel: usb 1-2: configuration #1 chosen from 1 choice Nov
> 14 14:40:35 pozzaibe kernel: Adding 522104k swap on /dev/hdb2.
> Priority:-1 extents:1 across:522104k Nov 14 14:40:35 pozzaibe kernel:
> usb 4-1: new full speed USB device using uhci_hcd and address 2 Nov
> 14 14:40:35 pozzaibe kernel: usb 4-1: Product: Deskjet 5900 series
> Nov 14 14:40:35 pozzaibe kernel: usb 4-1: Manufacturer: HP Nov 14
> 14:40:35 pozzaibe kernel: usb 4-1: SerialNumber: CN5771Z0HB047H Nov
> 14 14:40:35 pozzaibe kernel: usb 4-1: configuration #1 chosen from 1
> choice Nov 14 14:40:35 pozzaibe kernel: usbcore: registered new
> interface driver hiddev Nov 14 14:40:35 pozzaibe kernel: input:
> USB-compliant keyboard
> as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input4 Nov
> 14 14:40:35 pozzaibe kernel: input: USB HID v1.10 Keyboard
> [USB-compliant keyboard] on usb-0000:00:1d.0-2 Nov 14 14:40:35
> pozzaibe kernel: input: USB-compliant keyboard
> as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1/input/input5 Nov
> 14 14:40:35 pozzaibe kernel: input,hiddev96: USB HID v1.10 Mouse
> [USB-compliant keyboard] on usb-0000:00:1d.0-2 Nov 14 14:40:35
> pozzaibe kernel: usbcore: registered new interface driver usbhid Nov
> 14 14:40:35 pozzaibe kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB
> HID core driver Nov 14 14:40:35 pozzaibe kernel: usblp0: USB
> Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x8704
> Nov 14 14:40:35 pozzaibe kernel: usbcore: registered new interface
> driver usblp Nov 14 14:40:35 pozzaibe kernel: usb_id[1176]: segfault
> at 00000000 eip 45d995d8 esp bf9d9400 error 4 Nov 14 14:40:35
> pozzaibe kernel: usb_id[1187]: segfault at 00000000 eip 45d995d8 esp
> bffb41e0 error 4 Nov 14 14:40:35 pozzaibe kernel: usb_id[1188]:
> segfault at 00000000 eip 45d995d8 esp bfd44770 error 4 Nov 14
> 14:40:35 pozzaibe kernel: EXT3 FS on hdb1, internal journal Nov 14
> 14:40:35 pozzaibe kernel: loop: module loaded Nov 14 14:40:35
> pozzaibe kernel: w83627hf: Found W83627HF chip at 0x290 Nov 14
> 14:40:35 pozzaibe kernel: fuse init (API version 7.8) Nov 14 14:40:35
> pozzaibe kernel: kjournald starting. Commit interval 5 seconds Nov
> 14 14:40:35 pozzaibe kernel: EXT3 FS on hdb3, internal journal Nov 14
> 14:40:35 pozzaibe kernel: EXT3-fs: mounted filesystem with ordered
> data mode. Nov 14 14:40:35 pozzaibe kernel: eth1: link up, 100Mbps,
> full-duplex, lpa 0x45E1 Nov 14 14:40:35 pozzaibe kernel: scsi
> 0:0:0:0: Direct-Access Maxtor 3200 0344 PQ: 0 ANSI:
> 4 Nov 14 14:40:35 pozzaibe kernel: sd 0:0:0:0: [sda] 976773168
> 512-byte hardware sectors (500108 MB) Nov 14 14:40:35 pozzaibe
> kernel: sd 0:0:0:0: [sda] Write Protect is off Nov 14 14:40:35
> pozzaibe kernel: sd 0:0:0:0: [sda] 976773168 512-byte hardware
> sectors (500108 MB) Nov 14 14:40:35 pozzaibe kernel: sd 0:0:0:0:
> [sda] Write Protect is off Nov 14 14:40:35 pozzaibe kernel: sda:
> sda1 Nov 14 14:40:35 pozzaibe kernel: sd 0:0:0:0: [sda] Attached SCSI
> disk Nov 14 14:40:42 pozzaibe kernel: lp0: using parport0
> (interrupt-driven). Nov 14 14:40:42 pozzaibe kernel: ppdev:
> user-space parallel port driver Nov 14 14:40:45 pozzaibe pcscd:
> pcscdaemon.c:507:main() pcsc-lite 1.4.4 daemon ready. Nov 14 14:40:51
> pozzaibe kernel: nvidia: module license 'NVIDIA' taints kernel. Nov
> 14 14:40:51 pozzaibe kernel: ACPI: PCI Interrupt 0000:01:00.0[A] ->
> GSI 16 (level, low) -> IRQ 18 Nov 14 14:40:51 pozzaibe kernel: NVRM:
> loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24
> PDT 2007 Nov 14 14:40:53 pozzaibe kernel: agpgart: Found an AGP 3.0
> compliant device at 0000:00:00.0. Nov 14 14:40:53 pozzaibe kernel:
> agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode Nov 14
> 14:40:53 pozzaibe kernel: agpgart: Putting AGP V3 device at
> 0000:01:00.0 into 8x mode Nov 14 14:41:53 pozzaibe kernel: kjournald
> starting. Commit interval 5 seconds Nov 14 14:41:53 pozzaibe kernel:
> EXT3 FS on sda1, internal journal Nov 14 14:41:53 pozzaibe kernel:
> EXT3-fs: mounted filesystem with ordered data mode. Nov 14 14:41:54
> pozzaibe kernel: NET: Registered protocol family 10 Nov 14 14:41:54
> pozzaibe kernel: lo: Disabled Privacy Extensions
>
> sapete se con l'ultimo kernel abbiano cambiato qualcosa?
> devo mettere mano a qualche file in /dev?
> quale?
> devo configurare qualcosa nel kernel?
>
> grazie in anticipo
> Luigi
scusate la formattazione sopra, fa un po schifo.
inoltre dimenticavo di dire, che mi trovo su unstable e che ho usato il
sorgente vanilla del kernel in questione, mentre quello funzionante è
preso dai repository debian.
ho un pentium 4 a 2.66 gigahertz su una scheda madre asrock p4i65g.
NB: allego il file messages.
ciao e ancora grazie in anticipo
Luigi
--
~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*
Io sono
lo sbaglio, il momento di confusione, l'inopportuno
Non sono niente.
Non sarò mai niente.
Non posso volere d'essere niente.
A parte questo, ho in me tutti i sogni del mondo.
F. Pessoa
~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*
Nov 14 14:40:35 pozzaibe kernel: Linux version 2.6.23.1gg (root@pozzaibe) (gcc version 4.2.3 20071014 (prerelease) (Debian 4.2.2-3)) #1 PREEMPT Wed Nov 14 12:46:22 CET 2007
Nov 14 14:40:35 pozzaibe kernel: BIOS-provided physical RAM map:
Nov 14 14:40:35 pozzaibe kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Nov 14 14:40:35 pozzaibe kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Nov 14 14:40:35 pozzaibe kernel: BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Nov 14 14:40:35 pozzaibe kernel: BIOS-e820: 0000000000100000 - 000000003ff40000 (usable)
Nov 14 14:40:35 pozzaibe kernel: BIOS-e820: 000000003ff40000 - 000000003ff50000 (ACPI data)
Nov 14 14:40:35 pozzaibe kernel: BIOS-e820: 000000003ff50000 - 0000000040000000 (ACPI NVS)
Nov 14 14:40:35 pozzaibe kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Nov 14 14:40:35 pozzaibe kernel: BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
Nov 14 14:40:35 pozzaibe kernel: Warning only 896MB will be used.
Nov 14 14:40:35 pozzaibe kernel: Use a HIGHMEM enabled kernel.
Nov 14 14:40:35 pozzaibe kernel: 896MB LOWMEM available.
Nov 14 14:40:35 pozzaibe kernel: Zone PFN ranges:
Nov 14 14:40:35 pozzaibe kernel: DMA 0 -> 4096
Nov 14 14:40:35 pozzaibe kernel: Normal 4096 -> 229376
Nov 14 14:40:35 pozzaibe kernel: Movable zone start PFN for each node
Nov 14 14:40:35 pozzaibe kernel: early_node_map[1] active PFN ranges
Nov 14 14:40:35 pozzaibe kernel: 0: 0 -> 229376
Nov 14 14:40:35 pozzaibe kernel: DMI 2.3 present.
Nov 14 14:40:35 pozzaibe kernel: ACPI: RSDP 000FA550, 0014 (r0 ACPIAM)
Nov 14 14:40:35 pozzaibe kernel: ACPI: RSDT 3FF40000, 0030 (r1 A M I OEMRSDT 9000608 MSFT 97)
Nov 14 14:40:35 pozzaibe kernel: ACPI: FACP 3FF40200, 0081 (r2 A M I OEMFACP 9000608 MSFT 97)
Nov 14 14:40:35 pozzaibe kernel: ACPI: DSDT 3FF40370, 3B3B (r1 P4i6G P4i6G122 122 INTL 2002026)
Nov 14 14:40:35 pozzaibe kernel: ACPI: FACS 3FF50000, 0040
Nov 14 14:40:35 pozzaibe kernel: ACPI: APIC 3FF40300, 006C (r1 A M I OEMAPIC 9000608 MSFT 97)
Nov 14 14:40:35 pozzaibe kernel: ACPI: OEMB 3FF50040, 003F (r1 A M I OEMBIOS 9000608 MSFT 97)
Nov 14 14:40:35 pozzaibe kernel: ACPI: PM-Timer IO Port: 0x808
Nov 14 14:40:35 pozzaibe kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Nov 14 14:40:35 pozzaibe kernel: Processor #0 15:2 APIC version 20
Nov 14 14:40:35 pozzaibe kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
Nov 14 14:40:35 pozzaibe kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
Nov 14 14:40:35 pozzaibe kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
Nov 14 14:40:35 pozzaibe kernel: ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Nov 14 14:40:35 pozzaibe kernel: IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Nov 14 14:40:35 pozzaibe kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov 14 14:40:35 pozzaibe kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Nov 14 14:40:35 pozzaibe kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Nov 14 14:40:35 pozzaibe kernel: Using ACPI (MADT) for SMP configuration information
Nov 14 14:40:35 pozzaibe kernel: Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000)
Nov 14 14:40:35 pozzaibe kernel: Built 1 zonelists in Zone order. Total pages: 227584
Nov 14 14:40:35 pozzaibe kernel: Kernel command line: root=/dev/hdb1 ro
Nov 14 14:40:35 pozzaibe kernel: Enabling fast FPU save and restore... done.
Nov 14 14:40:35 pozzaibe kernel: Enabling unmasked SIMD FPU exception support... done.
Nov 14 14:40:35 pozzaibe kernel: Initializing CPU#0
Nov 14 14:40:35 pozzaibe kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
Nov 14 14:40:35 pozzaibe kernel: Detected 2663.243 MHz processor.
Nov 14 14:40:35 pozzaibe kernel: Console: colour VGA+ 80x25
Nov 14 14:40:35 pozzaibe kernel: console [tty0] enabled
Nov 14 14:40:35 pozzaibe kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Nov 14 14:40:35 pozzaibe kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Nov 14 14:40:35 pozzaibe kernel: Memory: 905292k/917504k available (1656k kernel code, 11728k reserved, 617k data, 180k init, 0k highmem)
Nov 14 14:40:35 pozzaibe kernel: virtual kernel memory layout:
Nov 14 14:40:35 pozzaibe kernel: fixmap : 0xfffb5000 - 0xfffff000 ( 296 kB)
Nov 14 14:40:35 pozzaibe kernel: vmalloc : 0xf8800000 - 0xfffb3000 ( 119 MB)
Nov 14 14:40:35 pozzaibe kernel: lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
Nov 14 14:40:35 pozzaibe kernel: .init : 0xc033c000 - 0xc0369000 ( 180 kB)
Nov 14 14:40:35 pozzaibe kernel: .data : 0xc029e2c0 - 0xc03388d4 ( 617 kB)
Nov 14 14:40:35 pozzaibe kernel: .text : 0xc0100000 - 0xc029e2c0 (1656 kB)
Nov 14 14:40:35 pozzaibe kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Nov 14 14:40:35 pozzaibe kernel: SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Nov 14 14:40:35 pozzaibe kernel: Calibrating delay using timer specific routine.. 5328.53 BogoMIPS (lpj=2664266)
Nov 14 14:40:35 pozzaibe kernel: Mount-cache hash table entries: 512
Nov 14 14:40:35 pozzaibe kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
Nov 14 14:40:35 pozzaibe kernel: CPU: L2 cache: 512K
Nov 14 14:40:35 pozzaibe kernel: Intel machine check architecture supported.
Nov 14 14:40:35 pozzaibe kernel: Intel machine check reporting enabled on CPU#0.
Nov 14 14:40:35 pozzaibe kernel: CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
Nov 14 14:40:35 pozzaibe kernel: CPU0: Thermal monitoring enabled
Nov 14 14:40:35 pozzaibe kernel: Compat vDSO mapped to ffffe000.
Nov 14 14:40:35 pozzaibe kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 09
Nov 14 14:40:35 pozzaibe kernel: Checking 'hlt' instruction... OK.
Nov 14 14:40:35 pozzaibe kernel: ACPI: Core revision 20070126
Nov 14 14:40:35 pozzaibe kernel: ENABLING IO-APIC IRQs
Nov 14 14:40:35 pozzaibe kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Nov 14 14:40:35 pozzaibe kernel: NET: Registered protocol family 16
Nov 14 14:40:35 pozzaibe kernel: ACPI: bus type pci registered
Nov 14 14:40:35 pozzaibe kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
Nov 14 14:40:35 pozzaibe kernel: PCI: Using configuration type 1
Nov 14 14:40:35 pozzaibe kernel: Setting up standard PCI resources
Nov 14 14:40:35 pozzaibe kernel: ACPI: Interpreter enabled
Nov 14 14:40:35 pozzaibe kernel: ACPI: (supports S0 S5)
Nov 14 14:40:35 pozzaibe kernel: ACPI: Using IOAPIC for interrupt routing
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Nov 14 14:40:35 pozzaibe kernel: PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
Nov 14 14:40:35 pozzaibe kernel: PCI quirk: region 0480-04bf claimed by ICH4 GPIO
Nov 14 14:40:35 pozzaibe kernel: PCI: Transparent bridge - 0000:00:1e.0
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Nov 14 14:40:35 pozzaibe kernel: ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 19, should be 0C [20070126]
Nov 14 14:40:35 pozzaibe kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Nov 14 14:40:35 pozzaibe kernel: pnp: PnP ACPI init
Nov 14 14:40:35 pozzaibe kernel: ACPI: bus type pnp registered
Nov 14 14:40:35 pozzaibe kernel: pnp: PnP ACPI: found 13 devices
Nov 14 14:40:35 pozzaibe kernel: ACPI: ACPI bus type pnp unregistered
Nov 14 14:40:35 pozzaibe kernel: PnPBIOS: Disabled by ACPI PNP
Nov 14 14:40:35 pozzaibe kernel: PCI: Using ACPI for IRQ routing
Nov 14 14:40:35 pozzaibe kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Nov 14 14:40:35 pozzaibe kernel: ACPI: RTC can wake from S4
Nov 14 14:40:35 pozzaibe kernel: Time: tsc clocksource has been installed.
Nov 14 14:40:35 pozzaibe kernel: pnp: 00:07: iomem range 0xfed20000-0xfed8ffff has been reserved
Nov 14 14:40:35 pozzaibe kernel: pnp: 00:07: iomem range 0xff380000-0xffefffff could not be reserved
Nov 14 14:40:35 pozzaibe kernel: pnp: 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
Nov 14 14:40:35 pozzaibe kernel: pnp: 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
Nov 14 14:40:35 pozzaibe kernel: pnp: 00:0b: ioport range 0x680-0x6ff has been reserved
Nov 14 14:40:35 pozzaibe kernel: pnp: 00:0b: ioport range 0x295-0x296 has been reserved
Nov 14 14:40:35 pozzaibe kernel: pnp: 00:0c: iomem range 0x0-0x9ffff could not be reserved
Nov 14 14:40:35 pozzaibe kernel: pnp: 00:0c: iomem range 0xc0000-0xdffff could not be reserved
Nov 14 14:40:35 pozzaibe kernel: pnp: 00:0c: iomem range 0xe0000-0xfffff could not be reserved
Nov 14 14:40:35 pozzaibe kernel: pnp: 00:0c: iomem range 0x100000-0x3fffffff could not be reserved
Nov 14 14:40:35 pozzaibe kernel: PCI: Bridge: 0000:00:01.0
Nov 14 14:40:35 pozzaibe kernel: IO window: disabled.
Nov 14 14:40:35 pozzaibe kernel: MEM window: f3d00000-f7dfffff
Nov 14 14:40:35 pozzaibe kernel: PREFETCH window: d3c00000-f3bfffff
Nov 14 14:40:35 pozzaibe kernel: PCI: Bridge: 0000:00:1e.0
Nov 14 14:40:35 pozzaibe kernel: IO window: b000-bfff
Nov 14 14:40:35 pozzaibe kernel: MEM window: f7e00000-f7efffff
Nov 14 14:40:35 pozzaibe kernel: PREFETCH window: disabled.
Nov 14 14:40:35 pozzaibe kernel: NET: Registered protocol family 2
Nov 14 14:40:35 pozzaibe kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Nov 14 14:40:35 pozzaibe kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Nov 14 14:40:35 pozzaibe kernel: TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
Nov 14 14:40:35 pozzaibe kernel: TCP: Hash tables configured (established 131072 bind 65536)
Nov 14 14:40:35 pozzaibe kernel: TCP reno registered
Nov 14 14:40:35 pozzaibe kernel: audit: initializing netlink socket (disabled)
Nov 14 14:40:35 pozzaibe kernel: audit(1195047621.173:1): initialized
Nov 14 14:40:35 pozzaibe kernel: io scheduler noop registered
Nov 14 14:40:35 pozzaibe kernel: io scheduler anticipatory registered
Nov 14 14:40:35 pozzaibe kernel: io scheduler deadline registered
Nov 14 14:40:35 pozzaibe kernel: io scheduler cfq registered (default)
Nov 14 14:40:35 pozzaibe kernel: isapnp: Scanning for PnP cards...
Nov 14 14:40:35 pozzaibe kernel: isapnp: No Plug & Play device found
Nov 14 14:40:35 pozzaibe kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Nov 14 14:40:35 pozzaibe kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 14 14:40:35 pozzaibe kernel: 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 14 14:40:35 pozzaibe kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 14 14:40:35 pozzaibe kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 14 14:40:35 pozzaibe kernel: ICH5: IDE controller at PCI slot 0000:00:1f.1
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
Nov 14 14:40:35 pozzaibe kernel: ICH5: chipset revision 2
Nov 14 14:40:35 pozzaibe kernel: ICH5: not 100% native mode: will probe irqs later
Nov 14 14:40:35 pozzaibe kernel: ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:DMA
Nov 14 14:40:35 pozzaibe kernel: ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
Nov 14 14:40:35 pozzaibe kernel: Switched to high resolution mode on CPU 0
Nov 14 14:40:35 pozzaibe kernel: hdb: MAXTOR STM3802110A, ATA DISK drive
Nov 14 14:40:35 pozzaibe kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 14 14:40:35 pozzaibe kernel: hdc: PHILIPS DVDR1640P, ATAPI CD/DVD-ROM drive
Nov 14 14:40:35 pozzaibe kernel: hdd: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
Nov 14 14:40:35 pozzaibe kernel: ide1 at 0x170-0x177,0x376 on irq 15
Nov 14 14:40:35 pozzaibe kernel: hdb: max request size: 512KiB
Nov 14 14:40:35 pozzaibe kernel: hdb: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
Nov 14 14:40:35 pozzaibe kernel: hdb: cache flushes supported
Nov 14 14:40:35 pozzaibe kernel: hdb: hdb1 hdb2 hdb3
Nov 14 14:40:35 pozzaibe kernel: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
Nov 14 14:40:35 pozzaibe kernel: PNP: PS/2 controller doesn't have KBD irq; using default 1
Nov 14 14:40:35 pozzaibe kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 14 14:40:35 pozzaibe kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Nov 14 14:40:35 pozzaibe kernel: mice: PS/2 mouse device common for all mice
Nov 14 14:40:35 pozzaibe kernel: TCP cubic registered
Nov 14 14:40:35 pozzaibe kernel: NET: Registered protocol family 1
Nov 14 14:40:35 pozzaibe kernel: NET: Registered protocol family 17
Nov 14 14:40:35 pozzaibe kernel: Using IPI Shortcut mode
Nov 14 14:40:35 pozzaibe kernel: kjournald starting. Commit interval 5 seconds
Nov 14 14:40:35 pozzaibe kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 14 14:40:35 pozzaibe kernel: VFS: Mounted root (ext3 filesystem) readonly.
Nov 14 14:40:35 pozzaibe kernel: Freeing unused kernel memory: 180k freed
Nov 14 14:40:35 pozzaibe kernel: Real Time Clock Driver v1.12ac
Nov 14 14:40:35 pozzaibe kernel: Floppy drive(s): fd0 is 1.44M
Nov 14 14:40:35 pozzaibe kernel: FDC 0 is a post-1991 82077
Nov 14 14:40:35 pozzaibe kernel: usbcore: registered new interface driver usbfs
Nov 14 14:40:35 pozzaibe kernel: usbcore: registered new interface driver hub
Nov 14 14:40:35 pozzaibe kernel: usbcore: registered new device driver usb
Nov 14 14:40:35 pozzaibe kernel: input: Power Button (FF) as /devices/virtual/input/input0
Nov 14 14:40:35 pozzaibe kernel: ACPI: Power Button (FF) [PWRF]
Nov 14 14:40:35 pozzaibe kernel: input: Power Button (CM) as /devices/virtual/input/input1
Nov 14 14:40:35 pozzaibe kernel: ACPI: Power Button (CM) [PWRB]
Nov 14 14:40:35 pozzaibe kernel: ACPI: Processor [CPU1] (supports 8 throttling states)
Nov 14 14:40:35 pozzaibe kernel: hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Nov 14 14:40:35 pozzaibe kernel: Uniform CD-ROM driver Revision: 3.20
Nov 14 14:40:35 pozzaibe kernel: hdd: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33)
Nov 14 14:40:35 pozzaibe kernel: 8139too Fast Ethernet driver 0.9.28
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 17
Nov 14 14:40:35 pozzaibe kernel: eth0: RealTek RTL8139 at 0xf8854800, 00:13:8f:f7:a3:d6, IRQ 17
Nov 14 14:40:35 pozzaibe kernel: input: PC Speaker as /devices/platform/pcspkr/input/input2
Nov 14 14:40:35 pozzaibe kernel: Linux agpgart interface v0.102
Nov 14 14:40:35 pozzaibe kernel: parport_pc 00:06: reported by Plug and Play ACPI
Nov 14 14:40:35 pozzaibe kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Nov 14 14:40:35 pozzaibe kernel: USB Universal Host Controller Interface driver v3.0
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 18
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.0: detected 2 ports
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000e000
Nov 14 14:40:35 pozzaibe kernel: usb usb1: Product: UHCI Host Controller
Nov 14 14:40:35 pozzaibe kernel: usb usb1: Manufacturer: Linux 2.6.23.1gg uhci_hcd
Nov 14 14:40:35 pozzaibe kernel: usb usb1: SerialNumber: 0000:00:1d.0
Nov 14 14:40:35 pozzaibe kernel: usb usb1: configuration #1 chosen from 1 choice
Nov 14 14:40:35 pozzaibe kernel: hub 1-0:1.0: USB hub found
Nov 14 14:40:35 pozzaibe kernel: hub 1-0:1.0: 2 ports detected
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.1: detected 2 ports
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
Nov 14 14:40:35 pozzaibe kernel: usb usb2: Product: UHCI Host Controller
Nov 14 14:40:35 pozzaibe kernel: usb usb2: Manufacturer: Linux 2.6.23.1gg uhci_hcd
Nov 14 14:40:35 pozzaibe kernel: usb usb2: SerialNumber: 0000:00:1d.1
Nov 14 14:40:35 pozzaibe kernel: usb usb2: configuration #1 chosen from 1 choice
Nov 14 14:40:35 pozzaibe kernel: hub 2-0:1.0: USB hub found
Nov 14 14:40:35 pozzaibe kernel: hub 2-0:1.0: 2 ports detected
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.2: detected 2 ports
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000e800
Nov 14 14:40:35 pozzaibe kernel: usb usb3: Product: UHCI Host Controller
Nov 14 14:40:35 pozzaibe kernel: usb usb3: Manufacturer: Linux 2.6.23.1gg uhci_hcd
Nov 14 14:40:35 pozzaibe kernel: usb usb3: SerialNumber: 0000:00:1d.2
Nov 14 14:40:35 pozzaibe kernel: usb usb3: configuration #1 chosen from 1 choice
Nov 14 14:40:35 pozzaibe kernel: hub 3-0:1.0: USB hub found
Nov 14 14:40:35 pozzaibe kernel: hub 3-0:1.0: 2 ports detected
Nov 14 14:40:35 pozzaibe kernel: udev: renamed network interface eth0 to eth1
Nov 14 14:40:35 pozzaibe kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
Nov 14 14:40:35 pozzaibe kernel: iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
Nov 14 14:40:35 pozzaibe kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 18
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.3: detected 2 ports
Nov 14 14:40:35 pozzaibe kernel: uhci_hcd 0000:00:1d.3: irq 18, io base 0x0000ec00
Nov 14 14:40:35 pozzaibe kernel: usb usb4: Product: UHCI Host Controller
Nov 14 14:40:35 pozzaibe kernel: usb usb4: Manufacturer: Linux 2.6.23.1gg uhci_hcd
Nov 14 14:40:35 pozzaibe kernel: usb usb4: SerialNumber: 0000:00:1d.3
Nov 14 14:40:35 pozzaibe kernel: usb usb4: configuration #1 chosen from 1 choice
Nov 14 14:40:35 pozzaibe kernel: hub 4-0:1.0: USB hub found
Nov 14 14:40:35 pozzaibe kernel: hub 4-0:1.0: 2 ports detected
Nov 14 14:40:35 pozzaibe kernel: usb 1-2: new low speed USB device using uhci_hcd and address 2
Nov 14 14:40:35 pozzaibe kernel: agpgart: Detected an Intel 865 Chipset.
Nov 14 14:40:35 pozzaibe kernel: agpgart: AGP aperture is 64M @ 0xf8000000
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 20
Nov 14 14:40:35 pozzaibe kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Nov 14 14:40:35 pozzaibe kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
Nov 14 14:40:35 pozzaibe kernel: ehci_hcd 0000:00:1d.7: debug port 1
Nov 14 14:40:35 pozzaibe kernel: ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf7fffc00
Nov 14 14:40:35 pozzaibe kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Nov 14 14:40:35 pozzaibe kernel: usb usb5: Product: EHCI Host Controller
Nov 14 14:40:35 pozzaibe kernel: usb usb5: Manufacturer: Linux 2.6.23.1gg ehci_hcd
Nov 14 14:40:35 pozzaibe kernel: usb usb5: SerialNumber: 0000:00:1d.7
Nov 14 14:40:35 pozzaibe kernel: usb usb5: configuration #1 chosen from 1 choice
Nov 14 14:40:35 pozzaibe kernel: hub 5-0:1.0: USB hub found
Nov 14 14:40:35 pozzaibe kernel: hub 5-0:1.0: 8 ports detected
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 22 (level, low) -> IRQ 17
Nov 14 14:40:35 pozzaibe kernel: firewire_ohci: Added fw-ohci device 0000:02:01.0, OHCI version 1.0
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 21
Nov 14 14:40:35 pozzaibe kernel: gameport: EMU10K1 is pci0000:02:02.1/gameport0, io 0xbc00, speed 1125kHz
Nov 14 14:40:35 pozzaibe kernel: ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 23 (level, low) -> IRQ 20
Nov 14 14:40:35 pozzaibe kernel: Installing spdif_bug patch: Audigy 1 ES [SB0160]
Nov 14 14:40:35 pozzaibe kernel: firewire_core: created new fw device fw0 (0 config rom retries, S400)
Nov 14 14:40:35 pozzaibe kernel: input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3
Nov 14 14:40:35 pozzaibe kernel: usb 5-4: new high speed USB device using ehci_hcd and address 3
Nov 14 14:40:35 pozzaibe kernel: usb 5-4: Product: Maxtor 3200
Nov 14 14:40:35 pozzaibe kernel: usb 5-4: Manufacturer: Maxtor Corporation
Nov 14 14:40:35 pozzaibe kernel: usb 5-4: SerialNumber: 2CAHVDQE
Nov 14 14:40:35 pozzaibe kernel: usb 5-4: configuration #1 chosen from 1 choice
Nov 14 14:40:35 pozzaibe kernel: SCSI subsystem initialized
Nov 14 14:40:35 pozzaibe kernel: Initializing USB Mass Storage driver...
Nov 14 14:40:35 pozzaibe kernel: usb 5-8: new high speed USB device using ehci_hcd and address 5
Nov 14 14:40:35 pozzaibe kernel: usb 5-8: Product: Creative ZEN V Plus
Nov 14 14:40:35 pozzaibe kernel: usb 5-8: Manufacturer: Creative Technology Ltd
Nov 14 14:40:35 pozzaibe kernel: usb 5-8: SerialNumber: C6C847050002FA9D
Nov 14 14:40:35 pozzaibe kernel: usb 5-8: configuration #1 chosen from 1 choice
Nov 14 14:40:35 pozzaibe kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Nov 14 14:40:35 pozzaibe kernel: usbcore: registered new interface driver usb-storage
Nov 14 14:40:35 pozzaibe kernel: USB Mass Storage support registered.
Nov 14 14:40:35 pozzaibe kernel: usb 1-2: new low speed USB device using uhci_hcd and address 4
Nov 14 14:40:35 pozzaibe kernel: usb 1-2: Product: USB-compliant keyboard
Nov 14 14:40:35 pozzaibe kernel: usb 1-2: configuration #1 chosen from 1 choice
Nov 14 14:40:35 pozzaibe kernel: Adding 522104k swap on /dev/hdb2. Priority:-1 extents:1 across:522104k
Nov 14 14:40:35 pozzaibe kernel: usb 4-1: new full speed USB device using uhci_hcd and address 2
Nov 14 14:40:35 pozzaibe kernel: usb 4-1: Product: Deskjet 5900 series
Nov 14 14:40:35 pozzaibe kernel: usb 4-1: Manufacturer: HP
Nov 14 14:40:35 pozzaibe kernel: usb 4-1: SerialNumber: CN5771Z0HB047H
Nov 14 14:40:35 pozzaibe kernel: usb 4-1: configuration #1 chosen from 1 choice
Nov 14 14:40:35 pozzaibe kernel: usbcore: registered new interface driver hiddev
Nov 14 14:40:35 pozzaibe kernel: input: USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input4
Nov 14 14:40:35 pozzaibe kernel: input: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:1d.0-2
Nov 14 14:40:35 pozzaibe kernel: input: USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1/input/input5
Nov 14 14:40:35 pozzaibe kernel: input,hiddev96: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:1d.0-2
Nov 14 14:40:35 pozzaibe kernel: usbcore: registered new interface driver usbhid
Nov 14 14:40:35 pozzaibe kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Nov 14 14:40:35 pozzaibe kernel: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x8704
Nov 14 14:40:35 pozzaibe kernel: usbcore: registered new interface driver usblp
Nov 14 14:40:35 pozzaibe kernel: usb_id[1176]: segfault at 00000000 eip 45d995d8 esp bf9d9400 error 4
Nov 14 14:40:35 pozzaibe kernel: usb_id[1187]: segfault at 00000000 eip 45d995d8 esp bffb41e0 error 4
Nov 14 14:40:35 pozzaibe kernel: usb_id[1188]: segfault at 00000000 eip 45d995d8 esp bfd44770 error 4
Nov 14 14:40:35 pozzaibe kernel: EXT3 FS on hdb1, internal journal
Nov 14 14:40:35 pozzaibe kernel: loop: module loaded
Nov 14 14:40:35 pozzaibe kernel: w83627hf: Found W83627HF chip at 0x290
Nov 14 14:40:35 pozzaibe kernel: fuse init (API version 7.8)
Nov 14 14:40:35 pozzaibe kernel: kjournald starting. Commit interval 5 seconds
Nov 14 14:40:35 pozzaibe kernel: EXT3 FS on hdb3, internal journal
Nov 14 14:40:35 pozzaibe kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 14 14:40:35 pozzaibe kernel: eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
Nov 14 14:40:35 pozzaibe kernel: scsi 0:0:0:0: Direct-Access Maxtor 3200 0344 PQ: 0 ANSI: 4
Nov 14 14:40:35 pozzaibe kernel: sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
Nov 14 14:40:35 pozzaibe kernel: sd 0:0:0:0: [sda] Write Protect is off
Nov 14 14:40:35 pozzaibe kernel: sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
Nov 14 14:40:35 pozzaibe kernel: sd 0:0:0:0: [sda] Write Protect is off
Nov 14 14:40:35 pozzaibe kernel: sda: sda1
Nov 14 14:40:35 pozzaibe kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Nov 14 14:40:42 pozzaibe kernel: lp0: using parport0 (interrupt-driven).
Nov 14 14:40:42 pozzaibe kernel: ppdev: user-space parallel port driver
Nov 14 14:40:45 pozzaibe pcscd: pcscdaemon.c:507:main() pcsc-lite 1.4.4 daemon ready.
Nov 14 14:40:51 pozzaibe kernel: nvidia: module license 'NVIDIA' taints kernel.
Nov 14 14:40:51 pozzaibe kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 18
Nov 14 14:40:51 pozzaibe kernel: NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007
Nov 14 14:40:53 pozzaibe kernel: agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
Nov 14 14:40:53 pozzaibe kernel: agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
Nov 14 14:40:53 pozzaibe kernel: agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
Nov 14 14:41:53 pozzaibe kernel: kjournald starting. Commit interval 5 seconds
Nov 14 14:41:53 pozzaibe kernel: EXT3 FS on sda1, internal journal
Nov 14 14:41:53 pozzaibe kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 14 14:41:54 pozzaibe kernel: NET: Registered protocol family 10
Nov 14 14:41:54 pozzaibe kernel: lo: Disabled Privacy Extensions
Reply to: