[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

eth0 non esiste.



Ho una ethernet pcmcia Xircon con modem. 
Non c'e' verso di fargliela vedere come ethernet.
La vede come seriale ttyS2. E basta. 

Ecco un po' di output per debug. Idee? 
Grazie mille. 
alberto. 

===========================  Debug info =========================
>lsmod

Module                  Size  Used by
serial_cs               5376   0  (unused)
ds                      6536   2  [serial_cs]
i82365                 28516   2 
pcmcia_core            44416   0  [serial_cs ds i82365]

> ifconfig eth0 

eth0: error fetching interface information: Device not found

> cardctl config

Socket 0:
  Vcc 5.0V  Vpp1 0.0V  Vpp2 0.0V
  interface type is "memory and I/O"
  irq 3 [exclusive] [level]
  Speaker output is enabled
  function 0:
    config base 0x0800
      option 0x61 status 0x08
    io 0x13f8-0x13ff [8bit]
Socket 1:
  not configured

> cardctl info

Socket 0:
  product info: "Xircom", "CreditCard Ethernet+Modem II", "CEM2", "1.00"
  manfid: 0x0105, 0x110a
  function: 2 (serial)
Socket 1:
  no product info available


> cat /var/run/stab

Socket 0: Xircom CE II Ethernet/Modem
0	serial	serial_cs	0	ttyS2	4	66
Socket 1: empty









Reply to: