grosso guaio con linux [lungo]
Sono nai pasticci più neri!
Ricompilo il kernel per avere il supporto per il file system xenix (per
vedere se riesco a leggere il Venix 80286), usando
make-kpkg --revision=1:giuliano.1.2 kernel_image
(vado a memoria, sono in windows), tolgo i moduli alsa per l'audio,
installo (dpkg -i kernel-image....., quello appena fatto), dò lilo e mi
dice candidamente che il drive BIOS 0x82 (/dev/hdc, dove c'è linux)
potrebbe non essere accessibile.
Riprovo, stesso msg, faccio la cretinata di _non_ guardare con fdisk
cos'abbia /dev/hdc, esco e riavvio ed esce questo msg di lilo (che è su
floppy):
L 01 01 01 ripetuto infinite volte, mentre un'altra volta il msg è 04,
anch'esso ripetuto finché non dò control-c
Provo col floppy di riserva e mi dà:
LIL-, bloccandosi
Perché due codici differenti? Forse perché di default le immagini sono
diverse?
Provo ad accedere con la distribuzione alfalinux v0.3.1 di rofus
(GRAZIE) che mi rincuora, perché le partizioni di /dev/hdc sono ancora
lì, ma non riesco a configurare lilo per accedere alla debian!
Fdisk non vede le partizioni di /dev/hdc, mentre all'avvio il kernel si.
Da notare che la partizione /dev/hdc4 (estesa) è tipo 85 (estesa linux)
e non 5 (estesa dos), potrebbe essere questa la ragione che l'fdisk di
alfalinux non vede le altre partizioni?
Grazie a chiunque leggerà questo msg e ancor di più a chi potrà
suggerire qualcosa.
Giuliano
Allego alcuni file (dmesg.txt, fstab.txt e lilo.conf), sperando che
possano servire.
Console: 16 point font, 400 scans
Console: colour VGA+ 80x25, 1 virtual console (max 63)
pcibios_init : BIOS32 Service Directory structure at 0x000fb0f0
pcibios_init : BIOS32 Service Directory entry at 0xfb590
pcibios_init : PCI BIOS revision 2.10 entry at 0xfb5c0
Probing PCI hardware.
Calibrating delay loop.. ok - 463.67 BogoMIPS
Memory: 62228k/65536k available (792k kernel code, 384k reserved, 1228k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: ICMP, UDP, TCP
VFS: Diskquotas version dquot_5.6.0 initialized
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
Intel Pentium with F0 0F bug - workaround enabled.
alias mapping IDT readonly ... ... done
Linux version 2.0.34 (root@a-bo15-26.tin.it) (gcc version egcs-2.90.29 980515 (egcs-1.0.3 release)) #4 Sat Jan 30 18:13:07 CET 1999
Starting kswapd v 1.4.2.2
Serial driver version 4.13 with no serial options enabled
tty00 at 0x03f8 (irq = 4) is a 16550A
tty01 at 0x02f8 (irq = 3) is a 16550A
Ramdisk driver initialized : 16 ramdisks of 4096K size
loop: registered device at major 7
ide: i82371 PIIX (Triton) on PCI bus 0 function 57
ide0: BM-DMA at 0xf000-0xf007
ide1: BM-DMA at 0xf008-0xf00f
hda: QUANTUM FIREBALL ST2.1A, 2014MB w/81kB Cache, CHS=1023/64/63, UDMA
hdc: Maxtor 90648D3, 6179MB w/512kB Cache, CHS=12556/16/63, UDMA
hdd: FUJITSU MPB3021ATU E, 2062MB w/0kB Cache, CHS=4470/15/63, UDMA
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md driver 0.35 MAX_MD_DEV=4, MAX_REAL=8
linear personality registered
raid0 personality registered
PPP: version 2.2.0 (dynamic channel allocation)
TCP compression code copyright 1989 Regents of the University of California
PPP Dynamic channel allocation code copyright 1995 Caldera, Inc.
PPP line discipline registered.
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 >
hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 hdc11 hdc12 hdc13 >
hdd: hdd1 hdd2 hdd3
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
VFS: Disk change detected on device 02:00
VFS: Disk change detected on device 02:00
UMSDOS Beta 0.6 (compatibility level 0.4, fast msdos)
UMSDOS Beta 0.6 (compatibility level 0.4, fast msdos)
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/hdc5 / ext2 defaults,errors=remount-ro 0 1
/dev/hdc10 none swap sw 0 0
proc /proc proc defaults 0 0
/dev/hdc2 /grafica ext2 defaults 0 2
/dev/hdc3 /boot ext2 defaults 0 2
/dev/hdc6 /home ext2 defaults 0 2
/dev/hdc7 /var ext2 defaults 0 2
/dev/hdc8 /usr ext2 defaults 0 2
/dev/hdc9 /usr/src ext2 defaults 0 2
/dev/hdc11 /tmp ext2 defaults 0 2
/dev/hdc12 /usr/local ext2 defaults 0 2
/dev/hdc13 /mnt/hdc13 ext2 defaults 0 2
/dev/cdrom /cdrom iso9660 noauto,ro,user 0 0
/dev/fd0 /mnt/a vfat noauto,rw,user 0 0
/dev/fd0 /mnt/floppy ext2 noauto,rw,user,nodev,nosuid 0 0
/dev/hda1 /mnt/discoc msdos noauto,rw,user,nodev,nosuid 0 0
/dev/hdc1 /mnt/discod msdos noauto,rw,user,nodev,nosuid 0 0
/dev/cdrom /mnt/cdrom iso9660 noauto,ro,user 0 0
/dev/cdrom2 /cdrom2 iso9660 noauto,ro,user 0 0
boot=/dev/fd0
compact
prompt
timeout=50
default=vecchia
image=/boot/vmlinuz-2.2.14
label=debian
root=/dev/hdc5
read-only
image=/boot/vmlinuz-2.0.36
label=linux_std
root=/dev/hdc5
read-only
image=/boot/vmlinuz-2.2.13
label=vecchia
root=/dev/hdc5
read-only
other=/dev/hda1
label=dos
table=/dev/hda
Reply to: