Ancora Hylafax
Ho ancora un altro problema con la ricezione dei FAX.
Riporto il file *.log creato durante il tentativo di ricezione:
Sep 03 12:01:09.11: [ 286]: SESSION BEGIN 00000010
Sep 03 12:01:09.11: [ 286]: <-- [4:ATA\r]
Sep 03 12:01:20.45: [ 286]: --> [5:+FCON]
Sep 03 12:01:20.45: [ 286]: ANSWER: FAX CONNECTION
Sep 03 12:01:20.45: [ 286]: RECV FAX: begin
Sep 03 12:01:22.48: [ 286]: --> [28:+FTSI:" "]
Sep 03 12:01:22.48: [ 286]: REMOTE TSI " "
Sep 03 12:01:22.48: [ 286]: --> [21:+FDCS:0,3,0,2,0,0,0,3]
Sep 03 12:01:22.48: [ 286]: REMOTE wants 9600 bit/s
Sep 03 12:01:22.48: [ 286]: REMOTE wants page width 1728 pixels in 215
mm
Sep 03 12:01:22.48: [ 286]: REMOTE wants unlimited page length
Sep 03 12:01:22.48: [ 286]: REMOTE wants 3.85 line/mm
Sep 03 12:01:22.48: [ 286]: REMOTE wants 1-D MR
Sep 03 12:01:22.78: [ 286]: --> [2:OK]
Sep 03 12:01:22.78: [ 286]: <-- [7:AT+FDR\r]
Sep 03 12:01:25.37: [ 286]: --> [5:+FCFR]
Sep 03 12:01:25.37: [ 286]: --> [21:+FDCS:0,3,0,2,0,0,0,3]
Sep 03 12:01:25.37: [ 286]: REMOTE wants 9600 bit/s
Sep 03 12:01:25.37: [ 286]: REMOTE wants page width 1728 pixels in 215
mm
Sep 03 12:01:25.37: [ 286]: REMOTE wants unlimited page length
Sep 03 12:01:25.37: [ 286]: REMOTE wants 3.85 line/mm
Sep 03 12:01:25.37: [ 286]: REMOTE wants 1-D MR
Sep 03 12:01:27.09: [ 286]: --> [7:CONNECT]
Sep 03 12:01:27.09: [ 286]: RECV: begin page
Sep 03 12:01:27.09: [ 286]: RECV: send trigger 021
Sep 03 12:01:27.09: [ 286]: <-- data [1]
Sep 03 12:03:15.55: [ 286]: <-- data [1]
Sep 03 12:03:15.55: [ 286]: RECV: Missing EOL after 5 seconds
Sep 03 12:03:15.56: [ 286]: REMOTE HANGUP: Missing EOL after 5 seconds
(secti
on 3.2/T.4) (code 91)
Sep 03 12:03:15.56: [ 286]: RECV FAX (00000010): recvq/fax00005.tif
from 0039
075 8508522, route to <unspecified>, 0 pages in 1:55
Sep 03 12:03:15.58: [ 286]: RECV FAX: Missing EOL after 5 seconds
(section 3.
2/T.4)
Sep 03 12:03:15.58: [ 286]: <-- [6:AT+FK\r]
Sep 03 12:03:15.80: [ 286]: --> [7:+FHNG:2]
Sep 03 12:03:15.80: [ 286]: REMOTE HANGUP: Call aborted, from +FK or
<CAN> (
code 2)
Sep 03 12:03:15.80: [ 286]: --> [2:OK]
Sep 03 12:03:15.80: [ 286]: RECV FAX (00000010): session with 00
2 terminated abnormally: Missing EOL after 5 seconds (section 3.2/T.4)
Sep 03 12:03:15.80: [ 286]: RECV FAX: bin/faxrcvd "recvq/fax00005.tif"
"ttyS0
" "00000010" "Missing EOL after 5 seconds (section 3.2/T.4)"
Sep 03 12:03:16.04: [ 286]: RECV FAX: end
Sep 03 12:03:16.04: [ 286]: SESSION END
Non riesco a capire che cosa sia questo EOL oppure questa sezione
3.2/T.4.
Grazie
Ciao Stefano
Reply to: