[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: iptables MARK breaks radvd



green wrote at 2010-07-01 19:05 -0500:
> Pascal Hambourg wrote at 2010-07-01 17:07 -0500:
> > Yes, it could be helpful to check packets on the bridge interface (br0),
> > and on the bridge port (eth1, eth2...) the client is connected to.
> 
> Commands run on the server.  After I started tcpdump I pinged the client 
> system I am working from (again, from the server).
> 
> The pings always work without the MARK rule.
> 
> If I add the MARK rule, then ping, the ping works for more than 60s.  If I add 
> the MARK rule, then wait at least 60s before attempting a ping, then the ping 
> fails.
> 
> No router advertisents seen on br0 or wlan0 when the MARK rule is active.
> 
> Perhaps I should try skipping the wireless; using eth1 port of br0?  I can try 
> that, but first I need to make my laptop's eth0 work (2.6.34 seems to have 
> broken it).

Actually, I forgot about changing the system board; the MAC address changed.

So I tried it without wireless and I get the same behavior.

Attachment: signature.asc
Description: Digital signature


Reply to: