Re: binding + autoconfig
On Thu, Aug 23, 2007 at 01:42:58PM +0200, Ferenc Wagner wrote:
> Wouter Verhelst <wouter@debian.org> writes:
>
> > On Thu, Aug 23, 2007 at 04:06:06AM +0200, Wagner Ferenc wrote:
> >> /proc/sys/net/ipv6/conf/*/autoconf and accept_ra are already all set
> >> to 0, but a networking restart still gets me link-local addresses...
> >
> > You cannot disable that. It's also not part of routing advertisement --
> > even if you have no working IPv6 setup but you do have the ipv6 module
> > loaded, you will have a link-local address. It's the kernel that
> > generates the link-local address, not the routing advertisement or
> > anything.
>
> Eh, that was a desperate last ditch attempt after setting autoconf to
> zero didn't help. What's controlled by autoconf, then? Thanks for
> the reply, anyway.
if you have route advertisement running on your network, your
globally-valid IP address that's generated automatically...
if you provide the output of 'ip addr show', I could tell you which one.
--
<Lo-lan-do> Home is where you have to wash the dishes.
-- #debian-devel, Freenode, 2004-09-22
Reply to: