[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Cannot switch my redhat to debian

Strange because the file config-2.6.15-1-mckinley-smp have the megaraid
activated as amodule.
Maybe the problem come from the initrd ?

De Leeuw Guy a écrit :

>Hello all,
>I try the entire day to install debian on my main server
>I dowload the etch daily build (20060516) for ia64
>I can boot but the system does not have the driver for the megaraid (see
>my previous post for a detailled hardware configuration) and the
>partition for installing debian is on a disk under this controller, but
>the all disks under the qlogic work fine.
>Finally I boot to a sarge, perfect, I see my 2 systems partitions
>(redhat and debian), I Install these system and change my source.list
>replacing all stable by etch, and finally launch apt-get dist-upgrade.
>After these step, I have normally a new kernel (2.6.15) but the next
>reboot continue to start on the sarge kernel (2.6.8)
>on the efi partition, I upgrade manually the vmlinuz and the initrd,
>reboot and no system disk because missing the driver megaraid :-(
>I known that I can build my own kernel, but for # reasons I prefer a
>kernel available direcly from yours site
>Could you help me ?
>(sorry for my bad english, I'm french speaker)

Guy De Leeuw
EDP Manager
Eurofer ASBL
211, rue du noyer
1000, Bruxelles
Phone : +32 (2) 738 79 40
Fax : +32 (2) 736 28 22
E-Mail : mailto:G.De_Leeuw@eurofer.be
www : http://www.eurofer.org

Reply to: