Not able to configure network

[प्रवीण् ए (Praveen A) <pravi.a@gmail.com>]

hi,

 I cannot create a device eth0 or eth1

Here is /dev/klog

GNU Mach 1.3
AT386 boot: physical memory from 0x0 to 0x1f7f0000
GNU Mach 1.3
AT386 boot: physical memory from 0x0 to 0x1f7f0000
pcibios_init : BIOS32 Service Directory structure at 0xp
pcibios_init : BIOS32 Service Directory entry at 0xeb4e0
pcibios_init : PCI BIOS revision 2.20 entry at 0xec5a9
Probing PCI hardware.
hd0: ST340014A, 38166MB w/2048kB Cache, CHS=5169/240/63
hd2: LITE-ON CD-ROM LTN-487T, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Failed initialization of WD-7000 SCSI card!
EATA0: address 0x1f0 in use, skipping probe.
EATA0: address 0x170 in use, skipping probe.
ppa: Version 1.42
ppa: Probing port 03bc
ppa: Probing port 0378
ppa:     SPP port present
ppa:     ECP with a i byte FIFO present
ppa:     PS/2 bidirectional port present
ppa:     Failed Intel bug check. (Phony EPP in ECP)
ppa: Probing port 0278
scsi : 0 hosts.
scsi : detected total.
rtl8139.c:v1.23a 8/24/2003 Donald Becker, 
becker@scyld.com.
 http://www.scyld.com/network/rtl8139.html
via-rhine.c:v1.16 7/22/2003  Written by Donald Becker <becker@scyld.com
>
  http://www.scyld.com/network/via-rhine.html
0 3c515 cards found.
eth0: D-Link DE-600 pocket adapter: not at I/O 0x378.
D-Link DE-620 pocket adapter not identified in the printer port
via-rhine.c:v1.16 7/22/2003  Written by Donald Becker <becker@scyld.com>
  http://www.scyld.com/network/via-rhine.html
0 3c515 cards found.
eth1: D-Link DE-600 pocket adapter: not at I/O 0x378.
D-Link DE-620 pocket adapter not identified in the printer port
Partition check (DOS partitions):
 hd0: [PTBL] [1027/255/63] hd0s1 hd0s2 < hd0s5 hd0s6 > hd0s4
com0: at atbus0, port = 3f8, spl = 6, pic = 4. (DOS COM1)
com1: at atbus1, port = 2f8, spl = 6, pic = 3. (DOS COM2)

module 0: (hd0,5)/hurd/ext2fs.static --multiboot-command-line=${kernel-command-line} --host-priv-port=${host-port} --device-master-port=${device-port} --exec-server-task=${exec-task} -T typed ${root} $(task-create) $(task-resume) 
module 1: (hd0,5)/lib/ld.so.1 /hurd/exec $(exec-task=task-create)                                                                                                                                                                     
2 multiboot modules                                                                                                                                                                                                                             task loaded: (hd0,5)/hurd/ext2fs.static --multiboot-command-line=(hd0,5)/boot/gnumach.gz root=device:hd0s6  --host-priv-port=2 --device-master-port=3 --exec-server-task=4 -T typed device:hd0s6
task loaded: (hd0,5)/lib/ld.so.1 /hurd/exec

start (hd0,5)/hurd/ext2fs.static: hd2: media changed
hd2: media changed
hd2: media changed
hd2: media changed


-- 
            "GNU is the system, and Linux is the  kernel."
A proud GNU user http://www.gnu.org
Me scribbles at http://www.pravi.co.nr