Re: Installation of Hurd/K8 problem
I doubt Thomas,
U have mentioned /dev/hda1
It means the primary master on the first ide Slot
So the equivalent device naming convention would be
hd0s1 and not hd1s1 (as u have written)
Try that out
Hope I am of some help ....
Keep me informed ..
mail me at email@example.com or firstname.lastname@example.org
On 4/13/05, Thomas Schlesinger <email@example.com> wrote:
> I've downloaded the Hurd installation CD 1 from
> <http://ftp.gnuab.org/pub/debian-cd/K8/> and installed it.
> Hurd is on /dev/hda1 (10GB, ext2, o=hurd), when I mount this partition from
> Linux, I can see the Hurd-files.
> When I try to start Hurd from the grub (v0.96) cli, like described here
> <http://www.debian.org/ports/hurd/hurd-install>, the kernel and the modules
> seem to be loaded (I got the Multiboot-confirmations, but with other
> numbers), but when I start the Hurd with "boot", my computer restarts with
> no error message.
> Like I've written, Hurd is installed on /dev/hda1, so I used "device:hd1s1"
> as root.
> My machine was an Athlon XP 2200 with a SIS chipset and a Nvidia GF5200FX
> graphics card and 1GB RAM.
> This is my /proc/interrupts from Linux:
> 0: 90994297 IO-APIC-edge timer
> 1: 5091 IO-APIC-edge i8042
> 7: 0 IO-APIC-edge parport0
> 9: 0 IO-APIC-level acpi
> 12: 243359 IO-APIC-edge i8042
> 14: 414267 IO-APIC-edge ide0
> 15: 3211345 IO-APIC-edge ide1
> 16: 5523621 IO-APIC-level nvidia
> 18: 3917829 IO-APIC-level SiS SI7012
> 19: 2853019 IO-APIC-level eth0
> 23: 0 IO-APIC-level ehci_hcd
> NMI: 0
> LOC: 90997091
> ERR: 0
> MIS: 0
> How can I get Hurd running on my machine?
> To UNSUBSCRIBE, email to debian-hurd-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact firstname.lastname@example.org
They say Love is Blind......
But Marriage is definitely an EYE OPENER