Your card wasn't properly detected by Mach. Though, from the looks your card should be supported. Could you send us the output of /dev/klog? Do the following steps _exactly_: cat /dev/klog > /boot.log [wait about 5 seconds, and hit ^C]
Done and attached. One line of the log seems the searching one:
PCI device 'Davicom DM9102' was not assigned an IRQ.
Maybe someone can give me a workaround or something else ;)
Happy hacking.
Thanks and Greetz.
GNU Mach 1.3 AT386 boot: physical memory from 0x0 to 0x27fec000 GNU Mach 1.3 AT386 boot: physical memory from 0x0 to 0x27fec000 pcibios_init : BIOS32 Service Directory structure at 0xp pcibios_init : BIOS32 Service Directory entry at 0xf06b0 pcibios_init : PCI BIOS revision 2.10 entry at 0xf08b0 Probing PCI hardware. ide: VIA VT82C586B (split FIFO) UDMA Bus Mastering IDE Controller on PCI bus 0 function 33 ide0: BM-DMA at 0xb800-0xb807 ide1: BM-DMA at 0xb808-0xb80f hd0: SAMSUNG SP1604N, 131071MB w/2048kB Cache, CHS=16709/255/63 hd1: COMPAQ DVD-ROM DRD-8120B, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Failed initialization of WD-7000 SCSI card! EATA0: address 0x1f0 in use, skipping probe. ppa: Version 1.42 ppa: Probing port 03bc ppa: Probing port 0378 ppa: SPP port present ppa: ECP with a i byte FIFO present ppa: PS/2 bidirectional port present ppa: Failed Intel bug check. (Phony EPP in ECP) ppa: Probing port 0278 scsi : 0 hosts. scsi : detected total. rtl8139.c:v1.23a 8/24/2003 Donald Becker, becker@scyld.com. http://www.scyld.com/network/rtl8139.html via-rhine.c:v1.16 7/22/2003 Written by Donald Becker <becker@scyld.com> http://www.scyld.com/network/via-rhine.html PCI device 'Davicom DM9102' was not assigned an IRQ. It will not be activated. 0 3c515 cards found. eth0: D-Link DE-600 pocket adapter: not at I/O 0x378. D-Link DE-620 pocket adapter not identified in the printer port via-rhine.c:v1.16 7/22/2003 Written by Donald Becker <becker@scyld.com> http://www.scyld.com/network/via-rhine.html PCI device 'Davicom DM9102' was not assigned an IRQ. It will not be activated. 0 3c515 cards found. eth1: D-Link DE-600 pocket adapter: not at I/O 0x378. D-Link DE-620 pocket adapter not identified in the printer port Partition check (DOS partitions): hd0: hd0s1 hd0s2 hd0s3 < hd0s5 hd0s6 hd0s7 hd0s8 > com0: at atbus0, port = 3f8, spl = 6, pic = 4. (DOS COM1) com1: at atbus1, port = 2f8, spl = 6, pic = 3. (DOS COM2) module 0: /hurd/ext2fs.static --multiboot-command-line=${kernel-command-line} --host-priv-port=${host-port} --device-master-port=${device-port} --exec-server-task=${exec-task} -T typed ${root} $(task-create) $(task-resume) module 1: /lib/ld.so.1 /hurd/exec $(exec-task=task-create) 2 multiboot modules task loaded: /hurd/ext2fs.static --multiboot-command-line=/boot/gnumach.gz root=device:hd0s1 --host-priv-port=2 --device-master-port=3 --exec-server-task=4 -T typed device:hd0s1 task loaded: /lib/ld.so.1 /hurd/exec start /hurd/ext2fs.static:
Attachment:
signature.asc
Description: OpenPGP digital signature