[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Debian hppa on HP9000/D270



Jan-Benedict Glaw schrieb:
On Fri, 2006-06-09 07:44:50 +0200, Andreas Rechberger <andreas.rechberger@inode.at> wrote:
Is there anybody, who has got expirience installing debian on HP9000/D270 Lanstation?
If i am going to boot the Server from CD i always get a Kernelpanic.
i have got latest netinstall.img from the debianmirror.

Would you care to post the actual boot log containing the panic?

MfG, JBG



ùùñf€f€f€volume gr

Firmware Version  38.40

Duplex Console IO Dependent Code (IODC) revision 4ysical volume(s) are missing.

------------------------------------------------------------------------------e volume group physical volume "/dev/dsk (c) Copyright 1995-1998, Hewlett-Packard Company, All rights reserved the physical volume refers to a device that does not ------------------------------------------------------------------------------the kernel.
vgchange: Warning: cou

Processor Speed State Coprocessor State Cache Size
The specified path does not correspond
--------- -------- --------------------- --

  Model: D270/1

Available memory (bytes) : 671088640me(s) are missing. Good memory required (bytes): 77955072ge: Warning: Couldn't attach to the volume

  Primary boot path:    8/4.8   (dec)
  Alternate boot path:  8/16/5.2   (dec)0d0":
The path of the physical
Console path: 8/12/0.0 (dec) Keyboard path: 8/16/7.0 (dec)onfigured into the kernel.

Processor is booting from first available device.ouldn't query physical volume "/dev/dsk/c0t0d0":

To discontinue, press any key within 10 seconds.
The specified path does not co

Boot terminated.al


Command Description": ------- -----------are missing. BOot [PRI|ALT|<path>] Boot from specified pathK (mounted read/write) PAth [PRI|ALT|CON|KEY] [<path>] Display or modify a path***
eisa_config running in automatic mode to fix a
SEArch [DIsplay|IPL] [<path>] Search for boot devices
    Date: 05/10/06    08:49:12

COnfiguration [<command>] Access Configuration menu/commandsn the configuration INformation [<command>] Access Information menauses:

DIsplay Redisplay the current menu
The board(s) listed below are not responding:
HElp [<menu>|<command>] Display help for menu or commandt 2

eisa_config finished
**************
RESET Restart the systeme systems
/sbin/fsclean: /dev/vg0
-------(mounte
Main Menu: Enter command > bo alt
HFS file systems a
Interact with IPL (Y, N, or Cancel)?> y
Checking vxfs

Booting...
Boot IO Dependent Code (IODC) revision 1
vxfs fsck: sanity check faile


HARD Booted./dev/vg01/lv
palo ipl 1.14 root@duet Sat Apr 8 16:08:16 EDT 2006


Boot image contains:en device /dev/vg01/
    0/vmlinux32 3995381 byt

 0: 0/linuxch device o
 1: root=/dev/ram0
 2: ramdisk_size=10330
 3: initrd=0/ramdisk open device /dev/vg
 4: console=ttyB0
 5: TERM=vt10200/lvol3 :

<#>    edit the numbered fieldcheck: root file system OK (mo
'b'    boot with this command line
'r'    restore commg00/lv
Current command line:/lvol5 :
0/linux root=/dev/ram0 ramdisk_size=20660 initrd=0/ramdisk console=ttyB0 TERM=vt

(c)Copyright 1983-1996 Hewlett-Packard Co.,  All Rights Reserved.
102
 0: 0/linux
 1: root=/dev/ram0
(c)C
 2: ramdisk_size=2066083, 1985-1993 The Rege
 3: initrd=0/ramdiskalifornia
 4: console=ttyB0
 5: TERM=vt102

<#>    edit the numbered field86 Novell, Inc.
'b'    boot with this command lineright 1986-1992 Sun Microsystems,
'r'    restore command line
(c)Co
'l'    list dir86, 1988 Massac
? btts

Command line for kernel: 'root=/dev/ram0 ramdisk_size=20660 console=ttyB0 TERM=v
(c)Copyright 1989-1993  The Open Software Foundation, Inc.
t102 palo_kernel=0/linux'
(c)C
Selected kernel: /linux from partition 0

 32-bit kernelELF32 executableD
Entry 00100000 first 00100000 n 3ation, or disclosure by the U.S.
Segment 0 load 00100000 size 2273900 mediaptr 0x1000
restrictions
Segment 1 load 0032c000 size 485036 mediaptr 0x22d000s in Segment 2 load 003a4000 size 372869 mediaptr 0x2a4000ware clause in DFARS 252.227-7013.
Loading ramdisk 2884033 bytes @ 27d2f000...


                           Hewlett-Pa
Branching to kernel entry point 0x00100000.  If this is the
                           3
     HP-UX Start-up
FP[0] enabled: Rev 0 Model 14
     __________
The 32-bit Kernel has started...

     Mount file
Initialized PDC Console for debugging.......... OK
Determining PDC firmware type: System Map. Setting hostname ..................... model 00005a20 00000481 00000000 00000002 7735d63a 100000f0 00000008 000000b2

Built 1 zonelists
Kernel command line: root=/dev/ram0 ramdisk_size=20660 console=ttyB0 TERM=vt102
     Start syncer daemo
palo_kernel=0/linux...................
PID hash table entries: 4096 (order: 12, 65536 bytes)
     Configure LAN interfaces ....
Console: colour dummy device 160x64
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)nt daemon ................... OK Inode-cache hash table entries: 65536 (order: 6, 26
Capability LSM initialized
Mount-cache hash table entries: 512
     Clean UUCP ..................
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
     List and/or clear temporary files ...........
NET: Registered protocol family 16
EISA bus registered   Clean up old log
Searching for devices..................... OK
Found devices:
1. U2-IOA BC Runway Port at 0xfff88000 [8] { 12, 0xf, 0x580, 0x0000b }aemon ....................... OK 2. UL 350 Lasi Core BA at 0xffd00000 [8/16] { 11, 0x0, 0x02e, 0x00081 }, additio............. May 10 14:49:40
nal addresses: 0xffd0c000 0xffc00000
4. UL 350 Core LAN (802.3) at 0xffd07000 [8/16/6] { 10, 0x0, 0x02e, 0x0008a }
o
5. UL 350 Core Centronics at 0xffd02000 [8/16/0] { 10, 0x0, 0x02e, 0x00074 }, ad
     Configure
ditional addresses: 0xffd01000 0xffd03000....... OK 6. UL 350 Core PS/2 Port at 0xffd08000 [8/16/7] { 10, 0x0, 0x02e, 0x00084 }......................... N/A 7. UL 350 Core PS/2 Port at 0xffd08100 [8/16/8] { 10, 0x0, 0x02e, 0x00084 }........... OK 8. UL 350 Core Wax BA at 0xffe00000 [8/20] { 11, 0x0, 0x030, 0x0008e } N/A 10. UL 350 Wax Core RS-232 at 0xffe02000 [8/20/2] { 10, 0x0, 0x030, 0x0008c } subsystem ................................ OK 11. Bluefish Add-on FW-SCSI at 0xf1004000 [8/4] { 4, 0x1, 0x013, 0x00089 }.......................... OK 12. Bluefish Add-on FW-SCSI at 0xf1008000 [8/8] { 4, 0x1, 0x013, 0x00089 }............ N/A 13. Gecko BOA BC GSC+ Port at 0xf100c000 [8/12] { 7, 0x0, 0x500, 0x0000c } OK

14. UltraLight CAP/MUX at 0xf1100000 [8/12/0] { 5, 0x0, 0x010, 0x0000d }
     Start
     Starting mail daemon
17. U2-IOA BC Runway Port at 0xfff8a000 [10] { 12, 0xf, 0x580, 0x0000b }
 hpa3 sen
18. U2-IOA BC GSC+ Port at 0xf183f000 [10/63] { 7, 0x1, 0x501, 0x0000c } 19. UL 1w U160 512K/512K (861/D270,D370) at 0xfffa0000 [32] { 0, 0x0, 0x5a2, 0x0 name (hpa3)
0004 }
-
20. Memory at 0xfffb1000 [49] { 1, 0x0, 0x076, 0x00009 }tarting outbound connection daemons for DDFA software ..
CPU(s): 1 x PA8000 (PCX-U) at 160.000000 MHz
     Start SNM
Setting cache flush threshold
wax at 0xffe00000 found.
     S
Wax EISA Adapter found at 0xfc000000bAgent .............. OK
Enumerating EISA bus
EISA slot 1 a configured board was not detected ( expected HWP1510)........... N/A EISA slot 2 a configured board was not detected ( expected MDG0002)............. N/A
EISA: Probing bus 0 at 8:20:5NCS broker daemons ..........
EISA: Mainboard HWPC010 detected.
EISA: Detected 0 cards.
     Start Gradient
Found GeckoBoa at 0xf100c000................ N/A
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cybertart HP OpenView License Manag
     Start time synchron
VFS: Disk quotas dquot_6.5.1........... OK
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)Start accounting .........................................
Initializing Cryptographic API
io scheduler noop registeredsk array monitor daemons. ..
io scheduler anticipatory registered (default)

io scheduler deadline registered............................. N/
io scheduler cfq registered
EISA EEPROM at 0xffc88000ng HP Distributed Print S
PDC Stable Storage facility v0.22
Soft power switch enabled, polling @ 0xf0140000.k daemon .............
serio: GSC PS/2 keyboard port at 0xffd08000 irq 19 @ 8:16:7
OK
     Start auditing subsystem ...............
serio: GSC PS/2 mouse port at 0xffd08100 irq 19 @ 8:16:8
     SAM Single point
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ttyB1 at MMIO 0xf1100880 (irq = -1) is a Mux
ttyB2 at MMIO 0xf1100900 (irq = -1) is a Mux
ttyB3 at MMIO 0xf1100980 (irq = -1) is a Mux
ttyB4 at MMIO 0xf1100a00 (irq = -1) is a Mux
ttyB5 at MMIO 0xf1100a80 (irq = -1) is a Mux
ttyB6 at MMIO 0xf1100b00 (irq = -1) is a Mux
ttyB7 at MMIO 0xf1100b80 (irq = -1) is a Mux
RAMDISK driver initialized: 16 RAM disks of 20660K size 1024 blocksize
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 320k freed
Setting up filesystem, please wait ...
Kernel panic - not syncing: Kernel Fault



Reply to: