debian-31r0a-hppa-binary-1.iso B2600 Kernel panic: High PrioritMachine Check (HPMC)
Hi,
Downloaded the
debian-31r0a-hppa-binary-1.iso checksumed ok.
Installing on an HP b2600.
Seemed to install just fine, to the point where it
reboots the machine.
Seems to start with a pretty healthy boot up.
The last thing it seems to do is check the CDROM the
green light comes on for a second and then I am left
with this screen full of information.
Any ideas, things to try, explanations etc. etc.
greatly appreciated.
Last Screen I get to see before Kernel Panic.
EXT3-fs: mounted filesystem with ordered data mode.
Adding 457812k swap on /dev/sdb6, Priority:-1 extents:1
EXT3 FS on sdb5, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ex1371: version v0.32 time 23:22:04 Feb 7 2005
es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x09
es1371: found es1371 rev 9 at io 0x12000 irq 128 joystick 0x0
ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721;23)
Backtrace:
[<1011ac10>] inb+0x60/0x7c
[<0017c0e8>] gameport_measure_speed+0xa8/0xac [gameport]
[<101e4954>] sysfs_create+0x9c/194
[<1024ba6c>] pci_device_probe_static+0x60/0x78
[<1024bac4>] __pci_device_probe+0x2c/0x58
[<1024bb10>] pci_device_probe+0x2c/0x58
[<1028268c>] bus_match+0x48/0x80
[<102827e8>] driver_attach+0x70/0xa4
[<10282cf4>] bus_add_driver+0x9c/0xb8
[<10283288>] driver_register+0xd8/0xe4
[<1024be58>] pci_register_driver+0xc4/0xf8
[<000cb204>] init_es1371+0x24/038 [es1371]
[<10158da4>] sys_init_module+0x314/0x6a4
[<10112178>] syscall_exit+0x0/0x14
High Priority Machine Check (HPMC): Code=1 regs=103dc080
(Addr=00000000)
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: *binary code* Not tainted
r00-03 *hex code*
r04-07 *hex code*
r08-11 *hex code*
r12-15 *hex code*
r16-19 *hex code*
r20-23 *hex code*
r24-27 *hex code*
r28-31 *hex code*
sr0-3 *hex code*
sr4-7 *hex code*
IASQ : 00000000 00000000 IAOQ: 10252644 10252648
IIR : 0f20001c ISR: a607fffb IOR: 80200218
CPU : 0 CR30: 8fa84000 CR31: 10468000
ORIG_R28: 00000000
IAOQ[0]: lba_astro_in8+0x10/0x20
IAOQ[1]: lba_astro_in8+0x14/0x20
RP(r2): inb+0x60/0x7c
Kernel panic: High PrioritMachine Check (HPMC)
Thanks for the time
Reply to: