RE: 2.4 -> 2.6
Hi Kyle,
As before, installing 2.4.27-32 after you patch ends in "Searching for
devices" (see attahced).
Thanks anyway,
Harry
-----Original Message-----
From: Kyle McMartin [mailto:kyle@mcmartin.ca]
Sent: Friday, February 25, 2005 7:28 PM
To: Harry Cochran
Subject: Re: 2.4 -> 2.6
Sorry, I screwed up here.
I doubt the patch will help (though it will solve a different problem).
After applying the patch, install 2.4.27-32 (NOT -smp) and then boot that
kernel and upgrade to 2.6.8-2-32-smp from there.
Apologies for this oversight,
Kyle
Booting...
Boot IO Dependent Code (IODC) revision 0
HARD Booted.
palo ipl 1.0 root@palinux Mon Apr 1 10:02:53 MST 2002
Partition Start(MB) End(MB) Id Type
1 1 48 f0 Palo
2 49 2001 82 swap
3 2002 17366 83 ext2
PALO(F0) partition contains:
0/vmlinux32 4080672 bytes @ 0x44000
Information: No console specified on kernel command line. This is normal.
PALO will choose the console currently used by firmware (serial).Current command
line:
1/vmlinux root=/dev/sda3 HOME=/ console=ttyS0 TERM=vt102
0: 1/vmlinux
1: root=/dev/sda3
2: HOME=/
3: console=ttyS0
4: TERM=vt102
Edit which field?
(or 'b' to boot with this command line)? b
Command line for kernel: 'root=/dev/sda3 HOME=/ console=ttyS0 TERM=vt102 palo_ke
rnel=1/vmlinux'
Selected kernel: /vmlinux from partition 1
Warning: kernel name doesn't end with 32 or 64 -- Guessing...
This box can boot either 32 or 64-bit kernels...Only see a 32-bit kernel, using
thatELF32 executable
Entry 001000b8 first 00100000 n 6
Segment 0 load 00100000 size 2469456 mediaptr 0x1000
Segment 1 load 0035c000 size 398264 mediaptr 0x25c000
Segment 2 load 003c0000 size 255804 mediaptr 0x2be000
Segment 3 load 00400000 size 8192 mediaptr 0x2fd000
Segment 4 load 00408000 size 32768 mediaptr 0x2ff000
Segment 5 load 00450818 size 130080 mediaptr 0x307818
Branching to kernel entry point 0x001000b8. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
Linux version 2.4.27-32 (root@mkhppa3) (gcc version 3.3.5 (Debian 1:3.3.5-6)) #1
Sun Jan 23 04:01:01 CET 2005
FP[0] enabled: Rev 1 Model 16
The 32-bit Kernel has started...
Determining PDC firmware type: System Map.
model 00005d40 00000491 00000000 00000002 782e91ff 100000f0 00000008 000000b2 00
0000b2
vers 00000301
CPUID vers 17 rev 11 (0x0000022b)
capabilities 0x3
model 9000/785/J6000
Total Memory: 2048 Mb
pagetable_init
On node 0 totalpages: 524288
zone(0): 524288 pages.
zone(1): 0 pages.
zone(2): 0 pages.
LCD display at f05d0008,f05d0000 registered
Kernel command line: root=/dev/sda3 HOME=/ console=ttyS0 TERM=vt102 palo_kernel=
1/vmlinux
Console: colour dummy device 160x64
Calibrating delay loop... 1101.00 BogoMIPS
Memory: 2068860k available
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 131072 (order: 7, 524288 bytes)
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
Searching for devices...
Reply to: